github/acrn-hypervisor
1
0
Fork 0
mirror of https://github.com/projectacrn/acrn-hypervisor.git synced 2025-09-09 12:49:24 +00:00
Code Issues Projects Releases Wiki Activity

doc: refine enable s5 document

Browse Source 
Lifecycle Manager will be refined in v2.7, this patch will
refine enable s5 document to align with the latest code.

v1-->v2:
	Remove the prompt from all instructions in this
	document.

Tracked-On: #6652

Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
This commit is contained in:
Xiangyang Wu
2021-11-10 10:39:33 +08:00
committed by David Kinder
parent 5bc0c97a12
commit 1d26695626
4 changed files with 208 additions and 133 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
doc/getting-started/getting-started.rst
View File

@@ -527,6 +527,7 @@ Build ACRN
disk="/media/$USER/"$(ls /media/$USER)
cp linux-5.10.52-acrn-sos-x86.tar.gz $disk/
cp ~/acrn-work/acrn-hypervisor/build/hypervisor/acrn.bin $disk/
cp ~/acrn-work/acrn-hypervisor/build/hypervisor/serial.conf $disk/
cp ~/acrn-work/my_board/output/launch_uos_id3.sh $disk/
cp ~/acrn-work/acpica-unix-20210105/generate/unix/bin/iasl $disk/
cp ~/acrn-work/acrn-hypervisor/build/acrn-2.6-unstable.tar.gz $disk/
@@ -535,6 +536,9 @@ Build ACRN
Even though our sample default scenario defines six User VMs, we're only
going to launch one of them, so we'll only need the one launch script.
.. note:: The :file:`serial.conf` is only generated if non standard vUARTs (not COM1~COM4)
are configured for Service VM in scenario XML file.
#. Insert the USB disk you just used into the target system and run these
commands to copy the tar files locally:
@@ -567,6 +571,7 @@ Build ACRN
sudo mkdir -p /boot/acrn/
sudo cp $disk/acrn.bin /boot/acrn
sudo cp $disk/serial.conf /etc
sudo cp $disk/iasl /usr/sbin/
cp $disk/launch_uos_id3.sh ~/acrn-work
sudo umount $disk/
@@ -576,7 +581,13 @@ Build ACRN
Install ACRN
************
In the following steps, you will configure GRUB on the target system.
In the following steps, you will install serial configuration tool and configure GRUB on the target system.
#. Install serial configuration tool in the target system as follows:
.. code-block:: bash
sudo apt-get install setserial
#. On the target, find the root filesystem (rootfs) device name by using the
``lsblk`` command: