From 28ef2f509bb7e96d567e80b63b17855377a944a9 Mon Sep 17 00:00:00 2001
From: Wei Liu <weix.w.liu@intel.com>
Date: Mon, 20 Apr 2020 16:59:40 +0800
Subject: [PATCH] acrn-config: remove sdc2 config xmls

Remove sdc2 scenario since the VM launch requirement under this scenario
will be satisfied by industry scenario.

Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
---
 .../xmls/config-xmls/apl-mrb/sdc2.xml         | 181 ------------------
 .../xmls/config-xmls/apl-up2/sdc2.xml         | 181 ------------------
 .../xmls/config-xmls/generic/sdc2.xml         | 179 -----------------
 .../xmls/config-xmls/nuc6cayh/sdc2.xml        | 181 ------------------
 .../xmls/config-xmls/nuc7i7dnb/sdc2.xml       | 180 -----------------
 .../xmls/config-xmls/whl-ipc-i5/sdc2.xml      | 180 -----------------
 .../xmls/config-xmls/whl-ipc-i7/sdc2.xml      | 180 -----------------
 7 files changed, 1262 deletions(-)
 delete mode 100644 misc/acrn-config/xmls/config-xmls/apl-mrb/sdc2.xml
 delete mode 100644 misc/acrn-config/xmls/config-xmls/apl-up2/sdc2.xml
 delete mode 100644 misc/acrn-config/xmls/config-xmls/generic/sdc2.xml
 delete mode 100644 misc/acrn-config/xmls/config-xmls/nuc6cayh/sdc2.xml
 delete mode 100644 misc/acrn-config/xmls/config-xmls/nuc7i7dnb/sdc2.xml
 delete mode 100644 misc/acrn-config/xmls/config-xmls/whl-ipc-i5/sdc2.xml
 delete mode 100644 misc/acrn-config/xmls/config-xmls/whl-ipc-i7/sdc2.xml

diff --git a/misc/acrn-config/xmls/config-xmls/apl-mrb/sdc2.xml b/misc/acrn-config/xmls/config-xmls/apl-mrb/sdc2.xml
deleted file mode 100644
index da7861b15..000000000
--- a/misc/acrn-config/xmls/config-xmls/apl-mrb/sdc2.xml
+++ /dev/null
@@ -1,181 +0,0 @@
-<acrn-config board="apl-mrb" scenario="sdc2">
-  <hv>
-    <DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
-        <RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
-        <SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS2</SERIAL_CONSOLE>
-        <MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
-        <NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
-        <CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
-        <LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
-        <LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
-    </DEBUG_OPTIONS>
-
-    <FEATURES>
-        <RELOC desc="Enable hypervisor relocation">y</RELOC>
-        <SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_NOOP</SCHEDULER>
-        <MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
-        <HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
-        <IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
-        <ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
-        <L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
-        <MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
-    </FEATURES>
-
-    <MEMORY>
-        <STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
-        <HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor">0x0b800000</HV_RAM_SIZE>
-        <HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor.">0x00400000</HV_RAM_START>
-        <LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
-        <UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
-        <SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
-        <PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
-    </MEMORY>
-
-    <CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
-        <IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
-        <MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
-        <MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
-        <MAX_KATA_VM_NUM desc="Maximum number of Kata Containers in SOS.">0</MAX_KATA_VM_NUM>
-        <MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
-        <MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
-        <MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
-        <MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device.">16</MAX_MSIX_TABLE_NUM>
-        <MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
-    </CAPACITIES>
-
-    <MISC_CFG>
-        <GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
-        <UEFI_OS_LOADER_NAME desc="UEFI OS loader name.">\\EFI\\org.clearlinux\\bootloaderx64.efi</UEFI_OS_LOADER_NAME>
-    </MISC_CFG>
-  </hv>
-
-  <vm id="0">
-    <vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
-    <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <memory>
-        <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
-        <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
-    </memory>
-    <os_config>
-        <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
-        <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
-        <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
-        <ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
-        <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
-    </os_config>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-    <pci_devs configurable="0" desc="pci devices list">
-        <pci_dev desc="pci device"></pci_dev>
-    </pci_devs>
-    <board_private>
-        <rootfs desc="rootfs for Linux kernel">/dev/mmcblk1p1</rootfs>
-        <bootargs desc="Specify kernel boot arguments">
-        rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
-        i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
-        hvlog=2M@0x6de00000 memmap=0x600000$0x6da00000 ramoops.mem_address=0x6da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
-        reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_initial_modeset=1 i915.enable_guc=0x02 video=DP-1:d video=DP-2:d cma=64M@0- panic_print=0x1f
-        </bootargs>
-    </board_private>
-  </vm>
-  <vm id="1">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>1</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="2">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>2</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="3">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-</acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/apl-up2/sdc2.xml b/misc/acrn-config/xmls/config-xmls/apl-up2/sdc2.xml
deleted file mode 100644
index 9ee60d44c..000000000
--- a/misc/acrn-config/xmls/config-xmls/apl-up2/sdc2.xml
+++ /dev/null
@@ -1,181 +0,0 @@
-<acrn-config board="apl-up2" scenario="sdc2">
-  <hv>
-    <DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
-        <RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
-        <SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
-        <MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
-        <NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
-        <CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
-        <LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
-        <LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
-    </DEBUG_OPTIONS>
-
-    <FEATURES>
-        <RELOC desc="Enable hypervisor relocation">y</RELOC>
-        <SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_NOOP</SCHEDULER>
-        <MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
-        <HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
-        <IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
-        <ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
-        <L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
-        <MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
-    </FEATURES>
-
-    <MEMORY>
-        <STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
-        <HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor">0x0b800000</HV_RAM_SIZE>
-        <HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor.">0x00400000</HV_RAM_START>
-        <LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
-        <UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
-        <SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
-        <PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
-    </MEMORY>
-
-    <CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
-        <IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
-        <MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
-        <MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
-        <MAX_KATA_VM_NUM desc="Maximum number of Kata Containers in SOS.">0</MAX_KATA_VM_NUM>
-        <MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
-        <MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
-        <MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
-        <MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device.">16</MAX_MSIX_TABLE_NUM>
-        <MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
-    </CAPACITIES>
-
-    <MISC_CFG>
-        <GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
-        <UEFI_OS_LOADER_NAME desc="UEFI OS loader name.">\\EFI\\org.clearlinux\\bootloaderx64.efi</UEFI_OS_LOADER_NAME>
-    </MISC_CFG>
-  </hv>
-
-  <vm id="0">
-    <vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
-    <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <memory>
-        <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
-        <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
-    </memory>
-    <os_config>
-        <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
-        <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
-        <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
-        <ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
-        <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
-    </os_config>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-    <pci_devs configurable="0" desc="pci devices list">
-        <pci_dev desc="pci device"></pci_dev>
-    </pci_devs>
-    <board_private>
-        <rootfs desc="rootfs for Linux kernel">/dev/mmcblk0p3</rootfs>
-        <bootargs desc="Specify kernel boot arguments">
-        rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
-        i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
-        hvlog=2M@0x5de00000 memmap=0x600000$0x5da00000 ramoops.mem_address=0x5da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
-        reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_guc=0x02 cma=64M@0-
-        </bootargs>
-    </board_private>
-  </vm>
-  <vm id="1">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>1</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="2">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>2</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="3">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-</acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/generic/sdc2.xml b/misc/acrn-config/xmls/config-xmls/generic/sdc2.xml
deleted file mode 100644
index 4b025a6df..000000000
--- a/misc/acrn-config/xmls/config-xmls/generic/sdc2.xml
+++ /dev/null
@@ -1,179 +0,0 @@
-<acrn-config board="generic" scenario="sdc2">
-  <hv>
-    <DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
-        <RELEASE desc="Release build. 'y' for Release, 'n' for Debug."></RELEASE>
-        <SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version."></SERIAL_CONSOLE>
-        <MEM_LOGLEVEL desc="Default loglevel in memory"></MEM_LOGLEVEL>
-        <NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log"></NPK_LOGLEVEL>
-        <CONSOLE_LOGLEVEL desc="Default loglevel on the serial console"></CONSOLE_LOGLEVEL>
-        <LOG_DESTINATION desc="Bitmap of consoles where logs are printed."></LOG_DESTINATION>
-        <LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu."></LOG_BUF_SIZE>
-    </DEBUG_OPTIONS>
-
-    <FEATURES>
-        <RELOC desc="Enable hypervisor relocation"></RELOC>
-        <SCHEDULER desc="The CPU scheduler to be used by the hypervisor."></SCHEDULER>
-        <MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol."></MULTIBOOT2>
-        <HYPERV_ENABLED desc="Enable Hyper-V enlightenment"></HYPERV_ENABLED>
-        <IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation."></IOMMU_ENFORCE_SNP>
-        <ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing."></ACPI_PARSE_ENABLED>
-        <L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry."></L1D_VMENTRY_ENABLED>
-        <MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change."></MCE_ON_PSC_DISABLED>
-    </FEATURES>
-
-    <MEMORY>
-        <STACK_SIZE desc="Capacity of one stack, in bytes."></STACK_SIZE>
-        <HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor"></HV_RAM_SIZE>
-        <HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor."></HV_RAM_START>
-        <LOW_RAM_SIZE desc="Size of the low RAM region"></LOW_RAM_SIZE>
-        <UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM."></UOS_RAM_SIZE>
-        <SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM."></SOS_RAM_SIZE>
-        <PLATFORM_RAM_SIZE desc="Size of the physical platform RAM"></PLATFORM_RAM_SIZE>
-    </MEMORY>
-
-    <CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
-        <IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization."></IOMMU_BUS_NUM>
-        <MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries."></MAX_IR_ENTRIES>
-        <MAX_IOAPIC_NUM desc="Maximum number of IO-APICs."></MAX_IOAPIC_NUM>
-        <MAX_KATA_VM_NUM desc="Maximum number of Kata Containers in SOS."></MAX_KATA_VM_NUM>
-        <MAX_PCI_DEV_NUM desc="Maximum number of PCI devices."></MAX_PCI_DEV_NUM>
-        <MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC."></MAX_IOAPIC_LINES>
-        <MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices."></MAX_PT_IRQ_ENTRIES>
-        <MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device."></MAX_MSIX_TABLE_NUM>
-        <MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions."></MAX_EMULATED_MMIO>
-    </CAPACITIES>
-
-    <MISC_CFG>
-        <GPU_SBDF desc="Segment, Bus, Device, and function of the GPU."></GPU_SBDF>
-        <UEFI_OS_LOADER_NAME desc="UEFI OS loader name."></UEFI_OS_LOADER_NAME>
-    </MISC_CFG>
-  </hv>
-
-  <vm id="0">
-    <vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
-    <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <memory>
-        <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
-        <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
-    </memory>
-    <os_config>
-        <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
-        <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
-        <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
-        <ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
-        <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
-    </os_config>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-    <pci_devs configurable="0" desc="pci devices list">
-        <pci_dev desc="pci device"></pci_dev>
-    </pci_devs>
-    <board_private>
-        <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
-        <bootargs desc="Specify kernel boot arguments">
-        rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
-        i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
-        </bootargs>
-    </board_private>
-  </vm>
-  <vm id="1">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>1</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="2">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>2</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="3">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-</acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/nuc6cayh/sdc2.xml b/misc/acrn-config/xmls/config-xmls/nuc6cayh/sdc2.xml
deleted file mode 100644
index d3c503dc3..000000000
--- a/misc/acrn-config/xmls/config-xmls/nuc6cayh/sdc2.xml
+++ /dev/null
@@ -1,181 +0,0 @@
-<acrn-config board="nuc6cayh" scenario="sdc2">
-  <hv>
-    <DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
-        <RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
-        <SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
-        <MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
-        <NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
-        <CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
-        <LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
-        <LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
-    </DEBUG_OPTIONS>
-
-    <FEATURES>
-        <RELOC desc="Enable hypervisor relocation">y</RELOC>
-        <SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_NOOP</SCHEDULER>
-        <MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
-        <HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
-        <IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
-        <ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
-        <L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
-        <MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
-    </FEATURES>
-
-    <MEMORY>
-        <STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
-        <HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor">0x0b800000</HV_RAM_SIZE>
-        <HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor.">0x00400000</HV_RAM_START>
-        <LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
-        <UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
-        <SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
-        <PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
-    </MEMORY>
-
-    <CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
-        <IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
-        <MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
-        <MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
-        <MAX_KATA_VM_NUM desc="Maximum number of Kata Containers in SOS.">0</MAX_KATA_VM_NUM>
-        <MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
-        <MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
-        <MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
-        <MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device.">16</MAX_MSIX_TABLE_NUM>
-        <MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
-    </CAPACITIES>
-
-    <MISC_CFG>
-        <GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
-        <UEFI_OS_LOADER_NAME desc="UEFI OS loader name.">\\EFI\\org.clearlinux\\bootloaderx64.efi</UEFI_OS_LOADER_NAME>
-    </MISC_CFG>
-  </hv>
-
-  <vm id="0">
-    <vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
-    <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <memory>
-        <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
-        <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
-    </memory>
-    <os_config>
-        <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
-        <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
-        <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
-        <ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
-        <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
-    </os_config>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-    <pci_devs configurable="0" desc="pci devices list">
-        <pci_dev desc="pci device"></pci_dev>
-        <pci_dev desc="pci device"></pci_dev>
-    </pci_devs>
-    <board_private>
-        <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
-        <bootargs desc="Specify kernel boot arguments">
-        rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
-        i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
-        hvlog=2M@0x1fe00000 memmap=0x200000$0x1fe00000
-        </bootargs>
-    </board_private>
-  </vm>
-  <vm id="1">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>1</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="2">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>2</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="3">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-</acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/sdc2.xml b/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/sdc2.xml
deleted file mode 100644
index 27b7afb19..000000000
--- a/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/sdc2.xml
+++ /dev/null
@@ -1,180 +0,0 @@
-<acrn-config board="nuc7i7dnb" scenario="sdc2">
-  <hv>
-    <DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
-        <RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
-        <SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
-        <MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
-        <NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
-        <CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
-        <LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
-        <LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
-    </DEBUG_OPTIONS>
-
-    <FEATURES>
-        <RELOC desc="Enable hypervisor relocation">y</RELOC>
-        <SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_NOOP</SCHEDULER>
-        <MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
-        <HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
-        <IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
-        <ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
-        <L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
-        <MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
-    </FEATURES>
-
-    <MEMORY>
-        <STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
-        <HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor">0x0b800000</HV_RAM_SIZE>
-        <HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor.">0x00400000</HV_RAM_START>
-        <LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
-        <UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
-        <SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
-        <PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
-    </MEMORY>
-
-    <CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
-        <IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
-        <MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
-        <MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
-        <MAX_KATA_VM_NUM desc="Maximum number of Kata Containers in SOS.">0</MAX_KATA_VM_NUM>
-        <MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
-        <MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
-        <MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
-        <MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device.">16</MAX_MSIX_TABLE_NUM>
-        <MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
-    </CAPACITIES>
-
-    <MISC_CFG>
-        <GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
-        <UEFI_OS_LOADER_NAME desc="UEFI OS loader name.">\\EFI\\org.clearlinux\\bootloaderx64.efi</UEFI_OS_LOADER_NAME>
-    </MISC_CFG>
-  </hv>
-
-  <vm id="0">
-    <vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
-    <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <memory>
-        <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
-        <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
-    </memory>
-    <os_config>
-        <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
-        <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
-        <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
-        <ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
-        <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
-    </os_config>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-    <pci_devs configurable="0" desc="pci devices list">
-        <pci_dev desc="pci device"></pci_dev>
-    </pci_devs>
-    <board_private>
-        <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
-        <bootargs desc="Specify kernel boot arguments">
-        rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
-        i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
-        hvlog=2M@0x1fe00000 memmap=0x200000$0x1fe00000
-        </bootargs>
-    </board_private>
-  </vm>
-  <vm id="1">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>1</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="2">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>2</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="3">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-</acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/whl-ipc-i5/sdc2.xml b/misc/acrn-config/xmls/config-xmls/whl-ipc-i5/sdc2.xml
deleted file mode 100644
index e65070f5c..000000000
--- a/misc/acrn-config/xmls/config-xmls/whl-ipc-i5/sdc2.xml
+++ /dev/null
@@ -1,180 +0,0 @@
-<acrn-config board="whl-ipc-i5" scenario="sdc2">
-  <hv>
-    <DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
-        <RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
-        <SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
-        <MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
-        <NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
-        <CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
-        <LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
-        <LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
-    </DEBUG_OPTIONS>
-
-    <FEATURES>
-        <RELOC desc="Enable hypervisor relocation">y</RELOC>
-        <SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_NOOP</SCHEDULER>
-        <MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
-        <HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
-        <IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
-        <ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
-        <L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
-        <MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
-    </FEATURES>
-
-    <MEMORY>
-        <STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
-        <HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor">0x0b800000</HV_RAM_SIZE>
-        <HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor.">0x00400000</HV_RAM_START>
-        <LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
-        <UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
-        <SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
-        <PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
-    </MEMORY>
-
-    <CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
-        <IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
-        <MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
-        <MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
-        <MAX_KATA_VM_NUM desc="Maximum number of Kata Containers in SOS.">0</MAX_KATA_VM_NUM>
-        <MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
-        <MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
-        <MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
-        <MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device.">16</MAX_MSIX_TABLE_NUM>
-        <MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
-    </CAPACITIES>
-
-    <MISC_CFG>
-        <GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
-        <UEFI_OS_LOADER_NAME desc="UEFI OS loader name.">\\EFI\\org.clearlinux\\bootloaderx64.efi</UEFI_OS_LOADER_NAME>
-    </MISC_CFG>
-  </hv>
-
-  <vm id="0">
-    <vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
-    <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <memory>
-        <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
-        <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
-    </memory>
-    <os_config>
-        <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
-        <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
-        <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
-        <ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
-        <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
-    </os_config>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-    <pci_devs configurable="0" desc="pci devices list">
-        <pci_dev desc="pci device"></pci_dev>
-    </pci_devs>
-    <board_private>
-        <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
-        <bootargs desc="Specify kernel boot arguments">
-        rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
-        i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
-        hvlog=2M@0x1fe00000 memmap=0x200000$0x1fe00000
-        </bootargs>
-    </board_private>
-  </vm>
-  <vm id="1">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>1</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="2">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>2</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="3">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-</acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/whl-ipc-i7/sdc2.xml b/misc/acrn-config/xmls/config-xmls/whl-ipc-i7/sdc2.xml
deleted file mode 100644
index ca47da675..000000000
--- a/misc/acrn-config/xmls/config-xmls/whl-ipc-i7/sdc2.xml
+++ /dev/null
@@ -1,180 +0,0 @@
-<acrn-config board="whl-ipc-i7" scenario="sdc2">
-  <hv>
-    <DEBUG_OPTIONS desc="Debug options for ACRN hypervisor, only valid on debug version">
-        <RELEASE desc="Release build. 'y' for Release, 'n' for Debug.">n</RELEASE>
-        <SERIAL_CONSOLE desc="The serial device which is used for hypervisor debug, only valid on Debug version.">/dev/ttyS0</SERIAL_CONSOLE>
-        <MEM_LOGLEVEL desc="Default loglevel in memory">5</MEM_LOGLEVEL>
-        <NPK_LOGLEVEL desc="Default loglevel for the hypervisor NPK log">5</NPK_LOGLEVEL>
-        <CONSOLE_LOGLEVEL desc="Default loglevel on the serial console">3</CONSOLE_LOGLEVEL>
-        <LOG_DESTINATION desc="Bitmap of consoles where logs are printed.">7</LOG_DESTINATION>
-        <LOG_BUF_SIZE desc="Capacity of logbuf for each physical cpu.">0x40000</LOG_BUF_SIZE>
-    </DEBUG_OPTIONS>
-
-    <FEATURES>
-        <RELOC desc="Enable hypervisor relocation">y</RELOC>
-        <SCHEDULER desc="The CPU scheduler to be used by the hypervisor.">SCHED_NOOP</SCHEDULER>
-        <MULTIBOOT2 desc="Support boot ACRN from multiboot2 protocol.">y</MULTIBOOT2>
-        <HYPERV_ENABLED desc="Enable Hyper-V enlightenment">y</HYPERV_ENABLED>
-        <IOMMU_ENFORCE_SNP desc="IOMMU enforce snoop behavior of DMA operation.">n</IOMMU_ENFORCE_SNP>
-        <ACPI_PARSE_ENABLED desc="Enable ACPI runtime parsing.">y</ACPI_PARSE_ENABLED>
-        <L1D_VMENTRY_ENABLED desc="Enable L1 cache flush before VM entry.">n</L1D_VMENTRY_ENABLED>
-        <MCE_ON_PSC_DISABLED desc="Force to disable software workaround for Machine Check Error on Page Size Change.">n</MCE_ON_PSC_DISABLED>
-    </FEATURES>
-
-    <MEMORY>
-        <STACK_SIZE desc="Capacity of one stack, in bytes.">0x2000</STACK_SIZE>
-        <HV_RAM_SIZE desc="Size of the RAM region used by the hypervisor">0x0b800000</HV_RAM_SIZE>
-        <HV_RAM_START desc="2M-aligned Start physical address of the RAM region used by the hypervisor.">0x00400000</HV_RAM_START>
-        <LOW_RAM_SIZE desc="Size of the low RAM region">0x00010000</LOW_RAM_SIZE>
-        <UOS_RAM_SIZE desc="Size of the User OS (UOS) RAM.">0x200000000</UOS_RAM_SIZE>
-        <SOS_RAM_SIZE desc="Size of the Service OS (SOS) RAM.">0x400000000</SOS_RAM_SIZE>
-        <PLATFORM_RAM_SIZE desc="Size of the physical platform RAM">0x400000000</PLATFORM_RAM_SIZE>
-    </MEMORY>
-
-    <CAPACITIES desc="Capacity limits for static assigned data struct or maximum supported resouce">
-        <IOMMU_BUS_NUM desc="Highest PCI bus ID used during IOMMU initialization.">0x100</IOMMU_BUS_NUM>
-        <MAX_IR_ENTRIES desc="Maximum number of Interrupt Remapping Entries.">256</MAX_IR_ENTRIES>
-        <MAX_IOAPIC_NUM desc="Maximum number of IO-APICs.">1</MAX_IOAPIC_NUM>
-        <MAX_KATA_VM_NUM desc="Maximum number of Kata Containers in SOS.">0</MAX_KATA_VM_NUM>
-        <MAX_PCI_DEV_NUM desc="Maximum number of PCI devices.">96</MAX_PCI_DEV_NUM>
-        <MAX_IOAPIC_LINES desc="Maximum number of interrupt lines per IOAPIC.">120</MAX_IOAPIC_LINES>
-        <MAX_PT_IRQ_ENTRIES desc="Maximum number of interrupt source for PT devices.">64</MAX_PT_IRQ_ENTRIES>
-        <MAX_MSIX_TABLE_NUM desc="Maximum number of MSI-X tables per device.">16</MAX_MSIX_TABLE_NUM>
-        <MAX_EMULATED_MMIO desc="Maximum number of emulated MMIO regions.">16</MAX_EMULATED_MMIO>
-    </CAPACITIES>
-
-    <MISC_CFG>
-        <GPU_SBDF desc="Segment, Bus, Device, and function of the GPU.">0x00000010</GPU_SBDF>
-        <UEFI_OS_LOADER_NAME desc="UEFI OS loader name.">\\EFI\\org.clearlinux\\bootloaderx64.efi</UEFI_OS_LOADER_NAME>
-    </MISC_CFG>
-  </hv>
-
-  <vm id="0">
-    <vm_type desc="Specify the VM type" readonly="true">SOS_VM</vm_type>
-    <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <memory>
-        <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
-        <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
-    </memory>
-    <os_config>
-        <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
-        <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
-        <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
-        <ramdisk_mod desc="The tag for ramdisk image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline."></ramdisk_mod>
-        <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
-    </os_config>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-    <pci_devs configurable="0" desc="pci devices list">
-        <pci_dev desc="pci device"></pci_dev>
-    </pci_devs>
-    <board_private>
-        <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
-        <bootargs desc="Specify kernel boot arguments">
-        rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
-        i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
-        hvlog=2M@0x1fe00000 memmap=0x200000$0x1fe00000
-        </bootargs>
-    </board_private>
-  </vm>
-  <vm id="1">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>1</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="2">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>2</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-  <vm id="3">
-    <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos configurable="0" desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
-        <vcpu_clos>0</vcpu_clos>
-    </clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
-</acrn-config>