Doc: Update GSG for v0.5 version and launch and acrn.conf sample script

modify sbl_up2 version and scripts

devicemodel/samples/nuc/launch_uos.sh

@@ -21,7 +21,7 @@ acrn-dm -A -m $mem_size -c $2 -s 0:0,hostbridge -s 1:0,lpc -l com1,stdio \
   -s 2,pci-gvt -G "$3" \
   -s 5,virtio-console,@pty:pty_port \
   -s 6,virtio-hyper_dmabuf \
-  -s 3,virtio-blk,/home/clear/uos/clear-26770-kvm.img \
+  -s 3,virtio-blk,/home/clear/uos/clear-27230-kvm.img \
   -s 4,virtio-net,tap0 \
   --mac_seed $mac_seed \
   -k /usr/lib/kernel/default-iot-lts2018 \

doc/getting-started/apl-nuc.rst

@@ -37,13 +37,13 @@ complete this setup.
 
 .. note::
 
-   ACRN v0.4 (and the current master branch) requires Clear Linux
+   ACRN v0.5 (and the current master branch) requires Clear Linux
-   version 26770 or newer.  If you use a newer version of Clear Linux,
+   version 27230 or newer.  If you use a newer version of Clear Linux,
    you'll need to adjust the instructions below to reference the version
    number of Clear Linux you are using.
 
 #. Download the compressed Clear installer image from
-   https://download.clearlinux.org/releases/26770/clear/clear-26770-installer.img.xz
+   https://download.clearlinux.org/releases/27230/clear/clear-27230-installer.img.xz
    and follow the `Clear Linux installation guide
    <https://clearlinux.org/documentation/clear-linux/get-started/bare-metal-install>`__
    as a starting point for installing Clear Linux onto your platform.  Follow the recommended
@@ -74,12 +74,12 @@ complete this setup.
    .. note::
       The Clear Linux installer will automatically check for updates and install the
       latest version available on your system. If you wish to use a specific version
-      (such as 26770), you can achieve that after the installation has completed using
+      (such as 27230), you can achieve that after the installation has completed using
-      ``sudo swupd verify --fix --picky -m 26770``
+      ``sudo swupd verify --fix --picky -m 27230``
 
 #. If you have an older version of Clear Linux already installed
    on your hardware, use this command to upgrade Clear Linux
-   to version 26770 (or newer):
+   to version 27230 (or newer):
 
    .. code-block:: none
 
@@ -118,9 +118,9 @@ partition. Follow these steps:
 
       $ sudo ls -1 /boot/EFI/org.clearlinux
       bootloaderx64.efi
-      kernel-org.clearlinux.native.4.19.8-670
+      kernel-org.clearlinux.native.4.20.2-683
-      kernel-org.clearlinux.iot-lts2018-sos.4.19.5-29
+      kernel-org.clearlinux.iot-lts2018-sos.4.19.13-1901141830
-      kernel-org.clearlinux.iot-lts2018.4.19.5-29
+      kernel-org.clearlinux.iot-lts2018.4.19.13-1901141830
       kernel-org.clearlinux.pk414-sos.4.14.74-115
       loaderx64.efi
 
@@ -250,9 +250,9 @@ partition. Follow these steps:
       :caption: ACRN Service OS Boot Menu
 
       => The ACRN Service OS
-      Clear Linux OS for Intel Architecture (Clear-linux-iot-lts2018-4.19.5-29)
+      Clear Linux OS for Intel Architecture (Clear-linux-iot-lts2018-4.19.13-1901141830)
-      Clear Linux OS for Intel Architecture (Clear-linux-iot-lts2018-sos-4.19.5-29)
+      Clear Linux OS for Intel Architecture (Clear-linux-iot-lts2018-sos-4.19.13-1901141830)
-      Clear Linux OS for Intel Architecture (Clear-linux-native.4.19.8-670)
+      Clear Linux OS for Intel Architecture (Clear-linux-native.4.20.2-683)
       EFI Default Loader
       Reboot Into Firmware Interface
 
@@ -291,14 +291,14 @@ Set up Reference UOS
 ====================
 
 #. On your platform, download the pre-built reference Clear Linux UOS
-   image version 26770 (or newer) into your (root) home directory:
+   image version 27230 (or newer) into your (root) home directory:
 
    .. code-block:: none
 
       $ cd ~
       $ mkdir uos
       $ cd uos
-      $ curl -O https://download.clearlinux.org/releases/26770/clear/clear-26770-kvm.img.xz
+      $ curl -O https://download.clearlinux.org/releases/27230/clear/clear-27230-kvm.img.xz
 
    .. note::
       In case you want to use or try out a newer version of Clear Linux as the UOS, you can
@@ -309,16 +309,16 @@ Set up Reference UOS
 
    .. code-block:: none
 
-      $ unxz clear-26770-kvm.img.xz
+      $ unxz clear-27230-kvm.img.xz
 
 #. Deploy the UOS kernel modules to UOS virtual disk image (note: you'll need to use
    the same **iot-lts2018** image version number noted in step 1 above):
 
    .. code-block:: none
 
-      $ sudo losetup -f -P --show clear-26770-kvm.img
+      $ sudo losetup -f -P --show clear-27230-kvm.img
       $ sudo mount /dev/loop0p3 /mnt
-      $ sudo cp -r /usr/lib/modules/4.19.5-29.iot-lts2018 /mnt/lib/modules/
+      $ sudo cp -r /usr/lib/modules/4.19.13-1901141830.iot-lts2018 /mnt/lib/modules/
       $ sudo umount /mnt
       $ sync
 
@@ -337,7 +337,7 @@ Set up Reference UOS
 
    .. note::
       In case you have downloaded a different Clear Linux image than the one above
-      (``clear-26770-kvm.img.xz``), you will need to modify the Clear Linux file name
+      (``clear-27230-kvm.img.xz``), you will need to modify the Clear Linux file name
       and version number highlighted above (the ``-s 3,virtio-blk`` argument) to match
       what you have downloaded above. Likewise, you may need to adjust the kernel file
       name on the second line highlighted (check the exact name to be used using:

doc/tutorials/create-up2-images.sh

@@ -103,7 +103,7 @@ create_uos_images() {
     echo mount laag_image >> .cleanup    
 
     mkdir -p laag_image/clearlinux
-    ister.py -t $LAAG_JSON -V $MIRRORURL -C $MIRRORURL || 
+    ister.py -t $LAAG_JSON --format=staging -V $MIRRORURL -C $MIRRORURL || 
     {
         echo "ister create clearlinux.img failed"
         return 1

doc/tutorials/using_sbl_on_up2.rst

@@ -90,14 +90,14 @@ An example of the configuration file ``uos.json``:
                              { "disk" : "clearlinux.img", "partition" : 2, "type" : "ext4" } ],
        "PartitionMountPoints" : [ { "disk" : "clearlinux.img", "partition" : 1, "mount" : "/boot" },
            		          { "disk" : "clearlinux.img", "partition" : 2, "mount" : "/" } ],
-       "Version": 27050,
+       "Version": 27230,
        "Bundles": ["kernel-iot-lts2018", "openssh-server", "software-defined-cockpit", "os-core", "os-core-update"]
    }
 
 .. note::
    To generate the image with a specified version, please modify
-   the "Version" argument, ``"Version": 26000`` instead
+   the "Version" argument, ``"Version": 2****`` instead
-   of ``"Version": 27050`` for example.
+   of ``"Version": 27230`` for example.
 
 Clone the source code of ``acrn-hypervisor`` for building and use 
 ``v0.5`` release for example:
@@ -118,7 +118,7 @@ Build SOS and LaaG image:
 
    $ sudo -s 
    # ./acrn-hypervisor/devicemodel/samples/up2/create-up2-images.sh --images-type all \
-      --clearlinux-version 27050 --laag-json uos.json --acrn-code-path /path/to/acrn-hypervisor/
+      --clearlinux-version 27230 --laag-json uos.json --acrn-code-path /path/to/acrn-hypervisor/
 
 .. note::
    You must have root privileges to run ``create-up2-images.sh``.

efi-stub/clearlinux/acrn.conf

@@ -1,3 +1,3 @@
 title The ACRN Service OS
-linux   /EFI/org.clearlinux/kernel-org.clearlinux.iot-lts2018-sos.4.19.5-29
+linux   /EFI/org.clearlinux/kernel-org.clearlinux.iot-lts2018-sos.4.19.13-1901141830
 options console=tty0 console=ttyS0 i915.nuclear_pageflip=1 root=PARTUUID=<UUID of rootfs partition> rw rootwait ignore_loglevel no_timer_check consoleblank=0 i915.tsd_init=7 i915.tsd_delay=2000 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_guc_loading=0 i915.enable_guc_submission=0 i915.enable_preemption=1 i915.context_priority_mode=2 i915.enable_gvt=1 i915.enable_guc=0 hvlog=2M@0x1FE00000