From 3a53bb9b74377f3f1970a95e7403f880c06cac2b Mon Sep 17 00:00:00 2001
From: "Yang, Yu-chu" <yu-chu.yang@intel.com>
Date: Fri, 23 Oct 2020 13:18:05 -0700
Subject: [PATCH] acrn-config: add console and communication vuarts to scenario
 xmls

Add console and communication vuarts to default xmls under:
misc/vm_configs/xmls/config-xmls/<platforms>/<scenarios>.xml

Tracked-On: #5425
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
---
 .../xmls/config-xmls/apl-mrb/hybrid.xml       | 24 +++++++
 .../xmls/config-xmls/apl-mrb/industry.xml     | 24 +++++++
 .../config-xmls/apl-mrb/logical_partition.xml | 16 +++++
 .../xmls/config-xmls/apl-mrb/sdc.xml          | 24 +++++++
 .../apl-up2-n3350/logical_partition.xml       | 16 +++++
 .../xmls/config-xmls/apl-up2/hybrid.xml       | 24 +++++++
 .../xmls/config-xmls/apl-up2/industry.xml     | 24 +++++++
 .../config-xmls/apl-up2/logical_partition.xml | 16 +++++
 .../xmls/config-xmls/apl-up2/sdc.xml          | 24 +++++++
 .../config-xmls/cfl-k700-i7/hybrid_rt.xml     | 32 ++++++++++
 .../xmls/config-xmls/cfl-k700-i7/industry.xml | 64 +++++++++++++++++++
 .../xmls/config-xmls/ehl-crb-b/hybrid.xml     | 24 +++++++
 .../xmls/config-xmls/ehl-crb-b/hybrid_rt.xml  | 32 ++++++++++
 .../config-xmls/ehl-crb-b/hybrid_rt_fusa.xml  | 24 +++++++
 .../xmls/config-xmls/ehl-crb-b/industry.xml   | 64 +++++++++++++++++++
 .../ehl-crb-b/logical_partition.xml           | 16 +++++
 .../xmls/config-xmls/ehl-crb-b/sdc.xml        | 24 +++++++
 .../xmls/config-xmls/nuc6cayh/hybrid.xml      | 24 +++++++
 .../xmls/config-xmls/nuc6cayh/industry.xml    | 64 +++++++++++++++++++
 .../nuc6cayh/logical_partition.xml            | 16 +++++
 .../xmls/config-xmls/nuc6cayh/sdc.xml         | 24 +++++++
 .../xmls/config-xmls/nuc7i7dnb/hybrid.xml     | 24 +++++++
 .../xmls/config-xmls/nuc7i7dnb/industry.xml   | 64 +++++++++++++++++++
 .../nuc7i7dnb/logical_partition.xml           | 16 +++++
 .../xmls/config-xmls/nuc7i7dnb/sdc.xml        | 24 +++++++
 misc/vm_configs/xmls/config-xmls/qemu/sdc.xml | 18 +++++-
 .../xmls/config-xmls/tgl-rvp/hybrid.xml       | 24 +++++++
 .../xmls/config-xmls/tgl-rvp/hybrid_rt.xml    | 32 ++++++++++
 .../xmls/config-xmls/tgl-rvp/industry.xml     | 32 ++++++++++
 .../config-xmls/tgl-rvp/logical_partition.xml | 16 +++++
 .../xmls/config-xmls/tgl-rvp/sdc.xml          | 24 +++++++
 .../xmls/config-xmls/whl-ipc-i5/hybrid.xml    | 24 +++++++
 .../xmls/config-xmls/whl-ipc-i5/hybrid_rt.xml | 32 ++++++++++
 .../xmls/config-xmls/whl-ipc-i5/industry.xml  | 64 +++++++++++++++++++
 .../whl-ipc-i5/logical_partition.xml          | 16 +++++
 .../xmls/config-xmls/whl-ipc-i5/sdc.xml       | 24 +++++++
 .../xmls/config-xmls/whl-ipc-i7/hybrid.xml    | 24 +++++++
 .../xmls/config-xmls/whl-ipc-i7/hybrid_rt.xml | 32 ++++++++++
 .../xmls/config-xmls/whl-ipc-i7/industry.xml  | 64 +++++++++++++++++++
 .../whl-ipc-i7/logical_partition.xml          | 16 +++++
 .../xmls/config-xmls/whl-ipc-i7/sdc.xml       | 24 +++++++
 41 files changed, 1193 insertions(+), 1 deletion(-)

diff --git a/misc/vm_configs/xmls/config-xmls/apl-mrb/hybrid.xml b/misc/vm_configs/xmls/config-xmls/apl-mrb/hybrid.xml
index 13f5d6748..fefcfe548 100644
--- a/misc/vm_configs/xmls/config-xmls/apl-mrb/hybrid.xml
+++ b/misc/vm_configs/xmls/config-xmls/apl-mrb/hybrid.xml
@@ -102,6 +102,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -146,6 +154,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -186,5 +202,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/apl-mrb/industry.xml b/misc/vm_configs/xmls/config-xmls/apl-mrb/industry.xml
index 937bc7851..0e635814d 100644
--- a/misc/vm_configs/xmls/config-xmls/apl-mrb/industry.xml
+++ b/misc/vm_configs/xmls/config-xmls/apl-mrb/industry.xml
@@ -91,6 +91,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">s
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -131,6 +139,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2">
     <vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
@@ -161,5 +177,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/apl-mrb/logical_partition.xml b/misc/vm_configs/xmls/config-xmls/apl-mrb/logical_partition.xml
index fa6a06d48..f284dd8fb 100644
--- a/misc/vm_configs/xmls/config-xmls/apl-mrb/logical_partition.xml
+++ b/misc/vm_configs/xmls/config-xmls/apl-mrb/logical_partition.xml
@@ -104,6 +104,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller (rev 0b)</pci_dev>
         <pci_dev desc="pci device">02:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
@@ -158,6 +166,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI (rev 0b)</pci_dev>
         <pci_dev desc="pci device">03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88W8897 [AVASTAR] 802.11ac Wireless</pci_dev>
diff --git a/misc/vm_configs/xmls/config-xmls/apl-mrb/sdc.xml b/misc/vm_configs/xmls/config-xmls/apl-mrb/sdc.xml
index 23ee9cf96..03ed232ae 100644
--- a/misc/vm_configs/xmls/config-xmls/apl-mrb/sdc.xml
+++ b/misc/vm_configs/xmls/config-xmls/apl-mrb/sdc.xml
@@ -91,6 +91,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -133,6 +141,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -158,5 +174,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/apl-up2-n3350/logical_partition.xml b/misc/vm_configs/xmls/config-xmls/apl-up2-n3350/logical_partition.xml
index baec64950..b9d60374e 100644
--- a/misc/vm_configs/xmls/config-xmls/apl-up2-n3350/logical_partition.xml
+++ b/misc/vm_configs/xmls/config-xmls/apl-up2-n3350/logical_partition.xml
@@ -103,6 +103,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller (rev 0b)</pci_dev>
         <pci_dev desc="pci device">02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)</pci_dev>
@@ -155,6 +163,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI (rev 0b)</pci_dev>
         <pci_dev desc="pci device">03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)</pci_dev>
diff --git a/misc/vm_configs/xmls/config-xmls/apl-up2/hybrid.xml b/misc/vm_configs/xmls/config-xmls/apl-up2/hybrid.xml
index 11a6680d8..6f64f916e 100644
--- a/misc/vm_configs/xmls/config-xmls/apl-up2/hybrid.xml
+++ b/misc/vm_configs/xmls/config-xmls/apl-up2/hybrid.xml
@@ -102,6 +102,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -146,6 +154,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -186,5 +202,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/apl-up2/industry.xml b/misc/vm_configs/xmls/config-xmls/apl-up2/industry.xml
index 3bc7e1d2e..f06e021d1 100644
--- a/misc/vm_configs/xmls/config-xmls/apl-up2/industry.xml
+++ b/misc/vm_configs/xmls/config-xmls/apl-up2/industry.xml
@@ -91,6 +91,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -131,6 +139,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2">
     <vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
@@ -161,5 +177,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/apl-up2/logical_partition.xml b/misc/vm_configs/xmls/config-xmls/apl-up2/logical_partition.xml
index 1c94747d3..13a3bb2d3 100644
--- a/misc/vm_configs/xmls/config-xmls/apl-up2/logical_partition.xml
+++ b/misc/vm_configs/xmls/config-xmls/apl-up2/logical_partition.xml
@@ -105,6 +105,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller (rev 0b)</pci_dev>
         <pci_dev desc="pci device">02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)</pci_dev>
@@ -159,6 +167,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI (rev 0b)</pci_dev>
         <pci_dev desc="pci device">03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)</pci_dev>
diff --git a/misc/vm_configs/xmls/config-xmls/apl-up2/sdc.xml b/misc/vm_configs/xmls/config-xmls/apl-up2/sdc.xml
index 3a54eed06..09fb657de 100644
--- a/misc/vm_configs/xmls/config-xmls/apl-up2/sdc.xml
+++ b/misc/vm_configs/xmls/config-xmls/apl-up2/sdc.xml
@@ -91,6 +91,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -133,6 +141,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -158,5 +174,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/cfl-k700-i7/hybrid_rt.xml b/misc/vm_configs/xmls/config-xmls/cfl-k700-i7/hybrid_rt.xml
index 85f6d97ce..cfb0ae0e1 100644
--- a/misc/vm_configs/xmls/config-xmls/cfl-k700-i7/hybrid_rt.xml
+++ b/misc/vm_configs/xmls/config-xmls/cfl-k700-i7/hybrid_rt.xml
@@ -100,6 +100,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
 	<pci_dev desc="pci device">00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-LM (rev 10)</pci_dev>
         <pci_dev desc="pci device">09:00.0 Non-Volatile memory controller: Silicon Motion, Inc. Device 2263 (rev 03)</pci_dev>
@@ -153,6 +161,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -195,6 +211,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -225,5 +249,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/cfl-k700-i7/industry.xml b/misc/vm_configs/xmls/config-xmls/cfl-k700-i7/industry.xml
index b04ec29d9..bf0b8321c 100644
--- a/misc/vm_configs/xmls/config-xmls/cfl-k700-i7/industry.xml
+++ b/misc/vm_configs/xmls/config-xmls/cfl-k700-i7/industry.xml
@@ -88,6 +88,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -128,6 +136,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2">
     <vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
@@ -158,6 +174,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -188,6 +212,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="4">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -218,6 +250,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="5">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -248,6 +288,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="6">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -278,6 +326,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="7" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -305,5 +361,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid.xml b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid.xml
index cce67dbb4..44b05a7d5 100644
--- a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid.xml
+++ b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid.xml
@@ -115,6 +115,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs desc="pci devices list">
             <pci_dev desc="pci device" />
         </pci_devs>
@@ -159,6 +167,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs configurable="0" desc="pci devices list">
             <pci_dev desc="pci device" />
         </pci_devs>
@@ -197,5 +213,13 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
     </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt.xml b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt.xml
index 7904a909a..e748b4b1b 100644
--- a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt.xml
+++ b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt.xml
@@ -111,6 +111,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs desc="pci devices list">
             <pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 4b63</pci_dev>
             <pci_dev desc="pci device">00:1d.2 Ethernet controller: Intel Corporation Device 4bb0</pci_dev>
@@ -155,6 +163,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs configurable="0" desc="pci devices list">
             <pci_dev desc="pci device" />
         </pci_devs>
@@ -195,6 +211,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
     </vm>
     <vm id="3">
         <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -223,5 +247,13 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
     </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt_fusa.xml b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt_fusa.xml
index 1ef4a538e..fa80c4f62 100644
--- a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt_fusa.xml
+++ b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/hybrid_rt_fusa.xml
@@ -110,6 +110,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs desc="pci devices list">
             <pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 4b63</pci_dev>
             <pci_dev desc="pci device">00:1a.3 Non-VGA unclassified device [0000]: Intel Corporation Device 4b4a</pci_dev>
@@ -158,6 +166,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs configurable="0" desc="pci devices list">
             <pci_dev desc="pci device" />
         </pci_devs>
@@ -196,5 +212,13 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
     </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/industry.xml b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/industry.xml
index 64f49dc60..71f9722b2 100644
--- a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/industry.xml
+++ b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/industry.xml
@@ -99,6 +99,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs configurable="0" desc="pci devices list">
             <pci_dev desc="pci device" />
         </pci_devs>
@@ -139,6 +147,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
     </vm>
     <vm id="2">
         <vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
@@ -169,6 +185,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -199,6 +223,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="4">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -229,6 +261,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="5">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -259,6 +299,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="6">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -289,6 +337,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="7" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -316,5 +372,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/logical_partition.xml b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/logical_partition.xml
index b34b368bc..8f383c0c7 100644
--- a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/logical_partition.xml
+++ b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/logical_partition.xml
@@ -113,6 +113,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs desc="pci devices list">
             <pci_dev desc="pci device" />
             <pci_dev desc="pci device" />
@@ -167,6 +175,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs desc="pci devices list">
             <pci_dev desc="pci device" />
             <pci_dev desc="pci device" />
diff --git a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/sdc.xml b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/sdc.xml
index 4e9e2807f..d3e9fa60c 100644
--- a/misc/vm_configs/xmls/config-xmls/ehl-crb-b/sdc.xml
+++ b/misc/vm_configs/xmls/config-xmls/ehl-crb-b/sdc.xml
@@ -99,6 +99,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
         <pci_devs configurable="0" desc="pci devices list">
             <pci_dev desc="pci device" />
         </pci_devs>
@@ -137,6 +145,14 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
     </vm>
     <vm configurable="1" desc="specific for Kata" id="2">
         <vm_type desc="Specify the VM type" readonly="true">KATA_VM</vm_type>
@@ -162,5 +178,13 @@
             <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
             <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
         </legacy_vuart>
+        <console_vuart id="0">
+            <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        </console_vuart>
+        <communication_vuart id="1">
+            <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+            <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+            <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+        </communication_vuart>
     </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/nuc6cayh/hybrid.xml b/misc/vm_configs/xmls/config-xmls/nuc6cayh/hybrid.xml
index 5093c33ba..c92713b6c 100644
--- a/misc/vm_configs/xmls/config-xmls/nuc6cayh/hybrid.xml
+++ b/misc/vm_configs/xmls/config-xmls/nuc6cayh/hybrid.xml
@@ -102,6 +102,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -146,6 +154,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -184,5 +200,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/nuc6cayh/industry.xml b/misc/vm_configs/xmls/config-xmls/nuc6cayh/industry.xml
index f4dc17fa7..021a44baf 100644
--- a/misc/vm_configs/xmls/config-xmls/nuc6cayh/industry.xml
+++ b/misc/vm_configs/xmls/config-xmls/nuc6cayh/industry.xml
@@ -91,6 +91,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
         <pci_dev desc="pci device"></pci_dev>
@@ -130,6 +138,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2">
     <vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
@@ -160,6 +176,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -190,6 +214,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="4">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -220,6 +252,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="5">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -250,6 +290,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="6">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -280,6 +328,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="7" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -307,5 +363,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/nuc6cayh/logical_partition.xml b/misc/vm_configs/xmls/config-xmls/nuc6cayh/logical_partition.xml
index c616737a8..466e85322 100644
--- a/misc/vm_configs/xmls/config-xmls/nuc6cayh/logical_partition.xml
+++ b/misc/vm_configs/xmls/config-xmls/nuc6cayh/logical_partition.xml
@@ -105,6 +105,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller (rev 0b)</pci_dev>
         <pci_dev desc="pci device">03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)</pci_dev>
@@ -159,6 +167,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI (rev 0b)</pci_dev>
         <pci_dev desc="pci device">02:00.0 Network controller: Intel Corporation Device 24fb (rev 10)</pci_dev>
diff --git a/misc/vm_configs/xmls/config-xmls/nuc6cayh/sdc.xml b/misc/vm_configs/xmls/config-xmls/nuc6cayh/sdc.xml
index 762797e4e..3fbcf6d67 100644
--- a/misc/vm_configs/xmls/config-xmls/nuc6cayh/sdc.xml
+++ b/misc/vm_configs/xmls/config-xmls/nuc6cayh/sdc.xml
@@ -91,6 +91,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
         <pci_dev desc="pci device"></pci_dev>
@@ -132,6 +140,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -157,5 +173,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/hybrid.xml b/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/hybrid.xml
index 3627b925e..50ea2ac29 100644
--- a/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/hybrid.xml
+++ b/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/hybrid.xml
@@ -98,6 +98,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -142,6 +150,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -180,5 +196,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/industry.xml b/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/industry.xml
index 1920074be..5a4e27591 100644
--- a/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/industry.xml
+++ b/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/industry.xml
@@ -87,6 +87,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -127,6 +135,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2">
     <vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
@@ -157,6 +173,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -187,6 +211,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="4">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -217,6 +249,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="5">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -247,6 +287,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="6">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -277,6 +325,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="7" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -304,5 +360,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/logical_partition.xml b/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/logical_partition.xml
index 5e26c5a51..a9bf86ee6 100644
--- a/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/logical_partition.xml
+++ b/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/logical_partition.xml
@@ -101,6 +101,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_dev_num configurable="0" desc="pci devices number">VM0_CONFIG_PCI_DEV_NUM</pci_dev_num>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)</pci_dev>
@@ -156,6 +164,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_dev_num configurable="0" desc="pci devices number">VM1_CONFIG_PCI_DEV_NUM</pci_dev_num>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)</pci_dev>
diff --git a/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/sdc.xml b/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/sdc.xml
index 56afd07df..daa8296a5 100644
--- a/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/sdc.xml
+++ b/misc/vm_configs/xmls/config-xmls/nuc7i7dnb/sdc.xml
@@ -87,6 +87,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -127,6 +135,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -152,5 +168,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/qemu/sdc.xml b/misc/vm_configs/xmls/config-xmls/qemu/sdc.xml
index 453d22609..7750615bc 100644
--- a/misc/vm_configs/xmls/config-xmls/qemu/sdc.xml
+++ b/misc/vm_configs/xmls/config-xmls/qemu/sdc.xml
@@ -77,7 +77,7 @@
     </os_config>
     <legacy_vuart id="0">
         <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
+        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM1_BASE</base>
         <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
     </legacy_vuart>
     <legacy_vuart id="1">
@@ -87,6 +87,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -125,5 +133,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/tgl-rvp/hybrid.xml b/misc/vm_configs/xmls/config-xmls/tgl-rvp/hybrid.xml
index 05b473065..29bbbd35c 100644
--- a/misc/vm_configs/xmls/config-xmls/tgl-rvp/hybrid.xml
+++ b/misc/vm_configs/xmls/config-xmls/tgl-rvp/hybrid.xml
@@ -98,6 +98,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -142,6 +150,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -179,5 +195,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/tgl-rvp/hybrid_rt.xml b/misc/vm_configs/xmls/config-xmls/tgl-rvp/hybrid_rt.xml
index 0ee315b35..2002e8bb9 100644
--- a/misc/vm_configs/xmls/config-xmls/tgl-rvp/hybrid_rt.xml
+++ b/misc/vm_configs/xmls/config-xmls/tgl-rvp/hybrid_rt.xml
@@ -102,6 +102,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device a0d3 (rev 20)</pci_dev>
         <pci_dev desc="pci device">00:1e.4 Ethernet controller: Intel Corporation Device a0ac (rev 20)</pci_dev>
@@ -146,6 +154,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -186,6 +202,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -214,5 +238,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/tgl-rvp/industry.xml b/misc/vm_configs/xmls/config-xmls/tgl-rvp/industry.xml
index b1b32cb5d..02d5131a0 100644
--- a/misc/vm_configs/xmls/config-xmls/tgl-rvp/industry.xml
+++ b/misc/vm_configs/xmls/config-xmls/tgl-rvp/industry.xml
@@ -87,6 +87,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -126,6 +134,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2">
     <vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
@@ -156,6 +172,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -186,6 +210,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/tgl-rvp/logical_partition.xml b/misc/vm_configs/xmls/config-xmls/tgl-rvp/logical_partition.xml
index be5918d2c..d6a42d578 100644
--- a/misc/vm_configs/xmls/config-xmls/tgl-rvp/logical_partition.xml
+++ b/misc/vm_configs/xmls/config-xmls/tgl-rvp/logical_partition.xml
@@ -101,6 +101,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device a0d3 (rev 20)</pci_dev>
         <pci_dev desc="pci device">00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (13) I219-V (rev 20)</pci_dev>
@@ -155,6 +163,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:14.0 USB controller: Intel Corporation Device a0ed (rev 20)</pci_dev>
     </pci_devs>
diff --git a/misc/vm_configs/xmls/config-xmls/tgl-rvp/sdc.xml b/misc/vm_configs/xmls/config-xmls/tgl-rvp/sdc.xml
index 354dce089..42e35d013 100644
--- a/misc/vm_configs/xmls/config-xmls/tgl-rvp/sdc.xml
+++ b/misc/vm_configs/xmls/config-xmls/tgl-rvp/sdc.xml
@@ -87,6 +87,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -126,6 +134,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -151,5 +167,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/hybrid.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/hybrid.xml
index 94a822c20..c9f13e933 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/hybrid.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/hybrid.xml
@@ -98,6 +98,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -142,6 +150,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -180,5 +196,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/hybrid_rt.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/hybrid_rt.xml
index de33f0661..7279a13b9 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/hybrid_rt.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/hybrid_rt.xml
@@ -98,6 +98,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 9dd3 (rev 30)</pci_dev>
         <pci_dev desc="pci device">03:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
@@ -142,6 +150,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -182,6 +198,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -210,5 +234,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/industry.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/industry.xml
index c1c84d914..545e64782 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/industry.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/industry.xml
@@ -87,6 +87,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -127,6 +135,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2">
     <vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
@@ -157,6 +173,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -187,6 +211,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="4">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -217,6 +249,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="5">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -247,6 +287,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="6">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -277,6 +325,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="7" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -304,5 +360,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/logical_partition.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/logical_partition.xml
index 073f62e53..95466546a 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/logical_partition.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/logical_partition.xml
@@ -101,6 +101,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 9dd3 (rev 30)</pci_dev>
         <pci_dev desc="pci device">03:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
@@ -155,6 +163,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:14.0 USB controller: Intel Corporation Device 9ded (rev 30)</pci_dev>
         <pci_dev desc="pci device">04:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/sdc.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/sdc.xml
index 81481e89d..cd0245a68 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/sdc.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i5/sdc.xml
@@ -87,6 +87,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -127,6 +135,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -152,5 +168,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/hybrid.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/hybrid.xml
index 08518ac7b..ba1574cd7 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/hybrid.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/hybrid.xml
@@ -98,6 +98,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -142,6 +150,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -180,5 +196,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/hybrid_rt.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/hybrid_rt.xml
index 465deb34d..880eaf208 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/hybrid_rt.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/hybrid_rt.xml
@@ -98,6 +98,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 9dd3 (rev 30)</pci_dev>
         <pci_dev desc="pci device">03:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
@@ -142,6 +150,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -182,6 +198,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -210,5 +234,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/industry.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/industry.xml
index 014542924..7f99e1efb 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/industry.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/industry.xml
@@ -87,6 +87,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -127,6 +135,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2">
     <vm_type desc="Specify the VM type" readonly="true">POST_RT_VM</vm_type>
@@ -157,6 +173,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="3">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -187,6 +211,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="4">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -217,6 +249,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="5">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -247,6 +287,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="6">
     <vm_type desc="Specify the VM type" readonly="true">POST_STD_VM</vm_type>
@@ -277,6 +325,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="7" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -304,5 +360,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/logical_partition.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/logical_partition.xml
index 8315ee097..c16842f3c 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/logical_partition.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/logical_partition.xml
@@ -101,6 +101,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:17.0 SATA controller: Intel Corporation Device 9dd3 (rev 30)</pci_dev>
         <pci_dev desc="pci device">03:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
@@ -155,6 +163,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs desc="pci devices list">
         <pci_dev desc="pci device">00:14.0 USB controller: Intel Corporation Device 9ded (rev 30)</pci_dev>
         <pci_dev desc="pci device">04:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)</pci_dev>
diff --git a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/sdc.xml b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/sdc.xml
index 3fec3b916..54293b85b 100644
--- a/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/sdc.xml
+++ b/misc/vm_configs/xmls/config-xmls/whl-ipc-i7/sdc.xml
@@ -91,6 +91,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
     <pci_devs configurable="0" desc="pci devices list">
         <pci_dev desc="pci device"></pci_dev>
     </pci_devs>
@@ -131,6 +139,14 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
   <vm id="2" configurable="1" desc="specific for Kata">
     <vm_type readonly="true" desc="Specify the VM type">KATA_VM</vm_type>
@@ -156,5 +172,13 @@
         <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
     </legacy_vuart>
+    <console_vuart id="0">
+        <base desc="Console vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+    </console_vuart>
+    <communication_vuart id="1">
+        <base desc="Communicatin vuart (PCI based) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_PCI_BASE</base>
+        <target_vm_id desc="This vuart is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
+        <target_uart_id desc="target vUART ID that this vuart connects to">1</target_uart_id>
+    </communication_vuart>
   </vm>
 </acrn-config>