github/acrn-hypervisor
1
0
Fork 0
mirror of https://github.com/projectacrn/acrn-hypervisor.git synced 2025-08-13 13:56:19 +00:00
Code Issues Projects Releases Wiki Activity

doc: fix formatting in partition doc

Browse Source 
Fix formatting missed during regular review.

Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit is contained in:
David B. Kinder 2019-06-03 09:13:51 -07:00 committed by David Kinder
parent 76346fd2b1
commit 475b05da54
1 changed files with 19 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
doc/tutorials/using_partition_mode_on_nuc.rst
View File

@ -43,20 +43,20 @@ Update kernel image and modules of Pre-launched VM
************************************************** **************************************************
#. On your development workstation, clone the ACRN kernel source tree, and build #. On your development workstation, clone the ACRN kernel source tree, and build
the Linux kernel image that will be used to boot the pre-launched VMs: the Linux kernel image that will be used to boot the pre-launched VMs:
.. code-block:: none .. code-block:: none
$ git clone https://github.com/projectacrn/acrn-kernel.git $ git clone https://github.com/projectacrn/acrn-kernel.git
Cloning into 'acrn-kernel'... Cloning into 'acrn-kernel'...
... ...
$ cd acrn-kernel $ cd acrn-kernel
$ cp kernel_config_uos .config $ cp kernel_config_uos .config
$ make olddefconfig $ make olddefconfig
scripts/kconfig/conf --olddefconfig Kconfig scripts/kconfig/conf --olddefconfig Kconfig
# #
# configuration written to .config # configuration written to .config
# #
$ make $ make
$ make modules_install INSTALL_MOD_PATH=out/ $ make modules_install INSTALL_MOD_PATH=out/
The last two commands build the bootable kernel image as The last two commands build the bootable kernel image as
@ -108,7 +108,7 @@ Update ACRN hypervisor Image
I/O addresses of the serial port. The NUC supports one serial port ttyS0. I/O addresses of the serial port. The NUC supports one serial port ttyS0.
You'll need to connect the serial port to the development workstation, in You'll need to connect the serial port to the development workstation, in
order to access the ACRN serial console to switch between pre-launched VMs: order to access the ACRN serial console to switch between pre-launched VMs:
.. code-block:: none .. code-block:: none
$ dmesg | grep ttyS0 $ dmesg | grep ttyS0
@ -129,7 +129,7 @@ Update ACRN hypervisor Image
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-LM (rev 21) 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-LM (rev 21)
Subsystem: Intel Corporation Ethernet Connection I219-LM Subsystem: Intel Corporation Ethernet Connection I219-LM
.. note:: .. note::
Double check PCI devices BDF defined in the Double check PCI devices BDF defined in the
``hypervisor/arch/x86/configs/nuc7i7bnh/pci_devices.h`` ``hypervisor/arch/x86/configs/nuc7i7bnh/pci_devices.h``
@ -150,16 +150,16 @@ Update ACRN hypervisor Image
Configure the build options: Configure the build options:
.. code-block:: none .. code-block:: none
$ make defconfig BOARD=nuc7i7bnh $ make defconfig BOARD=nuc7i7bnh
$ make menuconfig $ make menuconfig
Updates the following configure item: Updates the following configure item:
* Set ACRN Scenario as "Logical Partition VMs"; * Set ACRN Scenario as "Logical Partition VMs";
* Set Maximum number of VCPUs per VM as "2"; * Set Maximum number of VCPUs per VM as "2";
* Set Maximum number of PCPU as "4"; * Set Maximum number of PCPU as "4";
* Clear/Disable “Enable hypervisor relocation”. * Clear/Disable “Enable hypervisor relocation”.
We recommend keeping the default values of items not mentioned above. We recommend keeping the default values of items not mentioned above.
@ -213,7 +213,7 @@ Update Ubuntu GRUB to Boot hypervisor and Load Kernel Image
module /boot/bzImage module /boot/bzImage
} }
.. note:: .. note::
The kernel command line arguments used to boot the pre-launched VMs is The kernel command line arguments used to boot the pre-launched VMs is
located in header file located in header file