diff --git a/doc/develop.rst b/doc/develop.rst
index ce763792c..5576a28ea 100644
--- a/doc/develop.rst
+++ b/doc/develop.rst
@@ -22,6 +22,7 @@ Configuration Tutorials
    tutorials/using_partition_mode_on_nuc
    tutorials/using_partition_mode_on_up2
    tutorials/using_sdc2_mode_on_nuc
+   tutorials/using_hybrid_mode_on_nuc
 
 User VM Tutorials
 *****************
diff --git a/doc/getting-started/apl-nuc.rst b/doc/getting-started/apl-nuc.rst
index 8f0db74b3..2b3116787 100644
--- a/doc/getting-started/apl-nuc.rst
+++ b/doc/getting-started/apl-nuc.rst
@@ -17,6 +17,7 @@ described in :ref:`hardware`, are currently supported for ACRN development:
   <https://www.amazon.com/Intel-Business-Mini-Technology-BLKNUC7i7DNH1E/dp/B07CCQ8V4R>`__
   (NUC7i7DN), but this is not supported on APL (NUC6CAYH).
 
+.. _connect_serial_port:
 
 Connecting to the serial port
 =============================
diff --git a/doc/tutorials/images/hybrid_scenario_on_nuc.png b/doc/tutorials/images/hybrid_scenario_on_nuc.png
new file mode 100644
index 000000000..329f659ad
Binary files /dev/null and b/doc/tutorials/images/hybrid_scenario_on_nuc.png differ
diff --git a/doc/tutorials/using_hybrid_mode_on_nuc.rst b/doc/tutorials/using_hybrid_mode_on_nuc.rst
new file mode 100644
index 000000000..53216300c
--- /dev/null
+++ b/doc/tutorials/using_hybrid_mode_on_nuc.rst
@@ -0,0 +1,102 @@
+.. _using_hybrid_mode_on_nuc:
+
+Using Hybrid mode on NUC
+########################
+ACRN hypervisor supports hybrid scenario that the User VM
+(such as Zephyr or Clear Linux) could run in a pre-launched VM
+or in a post-launched VM which launched by Device model in Service VM.
+The following guidelines shows how to set up the ACRN hypervisor hybrid
+scenario on Intel NUC. The hybrid scenario on Intel NUC is shown in
+:numref:`hybrid_scenario_on_nuc`.
+
+.. figure:: images/hybrid_scenario_on_nuc.png
+   :align: center
+   :width: 400px
+   :name: hybrid_scenario_on_nuc
+
+   The HYBRID scenario on Intel NUC
+
+Prerequisites
+*************
+- `Intel NUC Kit NUC7i7DNHE
+  <https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc7i7dnhe.html>`_
+- Connecting to the serial port, described in :ref:`Connecting to the serial port
+  <connect_serial_port>`
+- Install Grub on SATA or NVME disk of NUC
+
+Update Ubuntu GRUB to Boot hypervisor and Load Kernel Image
+***********************************************************
+#. Append the following configuration to the ``/etc/grub.d/40_custom`` file:
+
+   .. code-block:: bash
+      :emphasize-lines: 18,20
+
+      menuentry 'ACRN hypervisor Hybird Scenario' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e23c76ae-b06d-4a6e-ad42-46b8eedfd7d3' {
+
+         recordfail
+
+         load_video
+
+         gfxmode $linux_gfx_mode
+
+         insmod gzio
+
+         insmod part_gpt
+
+         insmod ext2
+
+         echo 'Loading hypervisor Hybrid scenario ...'
+
+         multiboot --quirk-modules-after-kernel /boot/acrn.32.out
+
+         module /boot/zephyr.bin XXXXXX
+
+         module /boot/bzImage yyyyyy
+
+      }
+
+   .. note:: The module ``/boot/zephyr.bin`` is VM0(Zephyr) kernel file,
+      param ``xxxxxx`` is VM0’s kernel file tag and must exactly match the ``kernel_mod_tag``
+      of VM0 which configured in file ``hypervisor/scenarios/hybrid/vm_configurations.c``.
+      The multiboot module ``/boot/bzImage`` is Service VM kernel file, param ``yyyyyy``
+      is the bzImage tag and must exactly match the ``kernel_mod_tag`` of VM1 in file
+      ``hypervisor/scenarios/hybrid/vm_configurations.c``.
+      The kernel command line arguments used to boot the Service VM is located in header file
+      ``hypervisor/scenarios/hybrid/vm_configurations.h`` and configured by `SOS_VM_BOOTARGS` MACRO.
+
+#. Modify the ``/etc/default/grub`` file as follows to make the GRUB menu
+   visible when booting:
+
+   .. code-block:: bash
+
+      # GRUB_HIDDEN_TIMEOUT=0
+      GRUB_HIDDEN_TIMEOUT_QUIET=false
+
+#. Update grub::
+
+   $ sudo update-grub
+
+#. Reboot the NUC. Select the **ACRN hypervisor Hybrid Scenario** entry to boot
+   the ACRN hypervisor on the NUC’s display. The GRUB loader will boot the
+   hypervisor, and the hypervisor will start VMs automatically.
+
+Hybrid Scenario Startup Checking
+********************************
+#. Use these steps to verify the hypervisor is properly running:
+
+   a. Login ACRN hypervisor shell from serial console.
+   #. Use the vm_list check pre-launched VM and Service VM are launched successfully.
+
+#. Use these steps to verify all VMs are running properly:
+
+   a. Use the ``vm_console 0`` to switch to VM0(Zephyr)’s console, it will show
+      a string of **Hello world! acrn**.
+   #. Use a :kbd:`Ctrl+Spacebar` to return to the ACRN hypervisor shell.
+   #. Use the ``vm_console 1`` to switch to VM1(Service VM)’s console.
+   #. The VM1’s Service VM could boot up and login in.
+   #. SSH to VM1 and Launch post-launched VM2 by ACRN device model launch script.
+   #. Back to Service VM console, use a :kbd:`Ctrl+Spacebar` to return to the ACRN hypervisor shell.
+   #. Use the ``vm_console 2`` to switch to VM2(User VM)’s console.
+   #. The VM2 could boot up and login in.
+
+Refer to the :ref:`acrnshell` user guide for more information about available commands.
\ No newline at end of file