github/acrn-hypervisor
1
0
Fork 0
mirror of https://github.com/projectacrn/acrn-hypervisor.git synced 2025-06-24 14:33:38 +00:00
Code Issues Projects Releases Wiki Activity

kconfig patch

Browse Source 
Use customized function to generate proper config.h
which depend on kconfig,write the customized format
to support it.

V1->V2:
    Add comments.

Tracked-On: #861
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This commit is contained in:
Junjie Mao 2018-10-11 23:00:45 +08:00 committed by wenlingz
parent d859182d41
commit 66b53f8248
1 changed files with 38 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
hypervisor/arch/x86/Kconfig
View File

@ -38,10 +38,12 @@ config MAX_VM_NUM
config NR_IOAPICS
int "Maximum number of IOAPICs supported"
range 1 2
default 1
config MAX_IOMMU_NUM
int "Maximum number of iommu dev"
range 1 2
default 2
config STACK_SIZE
@ -54,11 +56,20 @@ config LOG_BUF_SIZE
config LOG_DESTINATION
int "Bitmap of consoles where logs are printed"
range 0 7
default 7
help
A bitmap indicating the destinations of log messages. Currently there
are 3 destinations available. Bit 0 represents the serial console, bit
1 the SOS ACRN log and bit 2 NPK log.
config CPU_UP_TIMEOUT
int "Timeout in ms when bringing up secondary CPUs"
range 100 200
default 100
help
A 32-bit integer specifying the timeout in microsecond when waiting for
secondary CPUs to start up.
choice
prompt "serial IO type"
@ -77,14 +88,21 @@ config SERIAL_MMIO_BASE
hex "Base address of serial MMIO region"
depends on SERIAL_MMIO
default 0xfc000000
help
A 64-bit integer indicating the base physical address of the
memory-mapped UART registers.
config SERIAL_PIO_BASE
hex "Base address of serial PIO region"
depends on SERIAL_PIO
default 0x3f8
help
The base of the UART ports. This is logically 16-bit but used as a
64-bit integer.
config MALLOC_ALIGN
int "Block size in the heap for malloc()"
range 8 32
default 16
config NUM_ALLOC_PAGES
@ -97,28 +115,45 @@ config HEAP_SIZE
config CONSOLE_LOGLEVEL_DEFAULT
int "Default loglevel on the serial console"
range 0 6
default 3
config MEM_LOGLEVEL_DEFAULT
int "Default loglevel in memory"
range 0 6
default 5
config NPK_LOGLEVEL_DEFAULT
int "Default loglevel for the hypervisor NPK log"
range 0 6
default 5
config LOW_RAM_SIZE
hex "Size of the low RAM region"
default 0x00010000
help
A 32-bit integer indicating the size of RAM region below address
0x10000, starting from address 0x0.
config RAM_START
hex "Address of the RAM region assigned to the hypervisor"
default 0x6e000000 if PLATFORM_SBL
default 0x00100000 if PLATFORM_UEFI
help
A 64-bit integer indicating the base address to where the hypervisor
should be loaded to. If RELOC is disabled the bootloader is required to
load the hypervisor to this specific address. Otherwise the hypervisor
will not boot.With RELOC enabled the hypervisor is capable of relocating
its symbols to where it is placed at, and thus the bootloader may not
place the hypervisor at this specific address.
config RAM_SIZE
hex "Size of the RAM region assigned to the hypervisor"
default 0x02000000
help
A 64-bit integer indicating the size of RAM assigned to the
hypervisor. It is ensured at link time that the footprint of the
hypervisor does not exceed this size.
config CONSTANT_ACPI
bool "The platform ACPI info is constant"
@ -133,6 +168,9 @@ config GPU_SBDF
hex
depends on DMAR_PARSE_ENABLED
default 0x00000010
help
A 32-bit integer encoding the segment, bus, device and function of the
GPU.
config EFI_STUB
bool