mirror of
https://github.com/projectacrn/acrn-hypervisor.git
synced 2025-06-26 07:21:37 +00:00
acrn-config: add xmls for acrn-config tools
1. add $(board) xmls which generate by acrn-config/target acrn-config/target/board_parser.py will generate native board information and store to $(board).xml then, acrn-config/board_config/board_cfg_gen.py will use the xml to generate hypervisor/arch/x86/configs/$(board)/ source file and apply to the local acrn-hypervisor 2. add $(scenario) xmls for acrn-config/scenario_config to config scenario acrn-config/scenario_config/scenario_cfg_gen.py will parse scenario xmls and generate hypervisor/scenarios/$(scenario) source file and apply to the local acrn-hypervisor Tracked-On: #3602 Signed-off-by: Wei Liu <weix.w.liu@intel.com> Acked-by: Victor Sun <victor.sun@intel.com> Acked-by: Terry Zou <terry.zou@intel.com>
This commit is contained in:
Wei Liu
wenlingz
parent
8a16d8b649
commit
6e1228706d
320
misc/acrn-config/xmls/board-xmls/apl-mrb.xml
Normal file
320
misc/acrn-config/xmls/board-xmls/apl-mrb.xml
Normal file
@ -0,0 +1,320 @@
|
||||
<acrn-config board="apl-mrb">
|
||||
<BIOS_INFO>
|
||||
</BIOS_INFO>
|
||||
|
||||
<BASE_BOARD_INFO>
|
||||
</BASE_BOARD_INFO>
|
||||
|
||||
<PCI_DEVICE>
|
||||
00:00.0 Host bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Host Bridge (rev 0b)
|
||||
00:00.1 Signal processing controller: Intel Corporation Device 5a8c (rev 0b)
|
||||
Region 0: Memory at b3618000 (64-bit, non-prefetchable) [size=32K]
|
||||
00:02.0 VGA compatible controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Integrated Graphics Controller (rev 0b)
|
||||
Region 0: Memory at b2000000 (64-bit, non-prefetchable) [size=16M]
|
||||
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
|
||||
00:03.0 Multimedia controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Imaging Unit (rev 0b)
|
||||
Region 0: Memory at b1000000 (64-bit, non-prefetchable) [size=16M]
|
||||
00:0e.0 Audio device: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster (rev 0b)
|
||||
Region 0: Memory at b3620000 (64-bit, non-prefetchable) [size=16K]
|
||||
Region 4: Memory at b3500000 (64-bit, non-prefetchable) [size=1M]
|
||||
00:0f.0 Communication controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Trusted Execution Engine (rev 0b)
|
||||
Region 0: Memory at b3657000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:0f.1 Communication controller: Intel Corporation Device 5a9c (rev 0b)
|
||||
Region 0: Memory at b3656000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:0f.2 Communication controller: Intel Corporation Device 5a9e (rev 0b)
|
||||
Region 0: Memory at b3655000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:11.0 Unclassified device [0050]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Integrated Sensor Hub (rev 0b)
|
||||
Region 0: Memory at b3624000 (64-bit, non-prefetchable) [size=8K]
|
||||
Region 2: Memory at b3654000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller (rev 0b)
|
||||
Region 0: Memory at b3610000 (32-bit, non-prefetchable) [size=8K]
|
||||
Region 1: Memory at b3653000 (32-bit, non-prefetchable) [size=256]
|
||||
Region 5: Memory at b3652000 (32-bit, non-prefetchable) [size=2K]
|
||||
00:13.0 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #1 (rev fb)
|
||||
00:13.2 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #3 (rev fb)
|
||||
00:13.3 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #4 (rev fb)
|
||||
00:14.0 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #1 (rev fb)
|
||||
00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI (rev 0b)
|
||||
Region 0: Memory at b3600000 (64-bit, non-prefetchable) [size=64K]
|
||||
00:15.1 USB controller: Intel Corporation Device 5aaa (rev 0b)
|
||||
Region 0: Memory at b3000000 (64-bit, non-prefetchable) [size=2M]
|
||||
00:16.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #1 (rev 0b)
|
||||
Region 0: Memory at b3650000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b364f000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:16.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #2 (rev 0b)
|
||||
Region 0: Memory at b364e000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b364d000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:16.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #3 (rev 0b)
|
||||
Region 0: Memory at b364c000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b364b000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:16.3 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #4 (rev 0b)
|
||||
Region 0: Memory at b364a000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3649000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:17.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #5 (rev 0b)
|
||||
Region 0: Memory at b3648000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3647000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:17.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #6 (rev 0b)
|
||||
Region 0: Memory at b3646000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3645000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:17.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #7 (rev 0b)
|
||||
Region 0: Memory at b3644000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3643000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:17.3 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #8 (rev 0b)
|
||||
Region 0: Memory at b3642000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3641000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:18.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #1 (rev 0b)
|
||||
Region 0: Memory at b3640000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b363f000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:18.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #2 (rev 0b)
|
||||
Region 0: Memory at b363e000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b363d000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:18.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #3 (rev 0b)
|
||||
Region 0: Memory at 80e00000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b363b000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:18.3 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #4 (rev 0b)
|
||||
Region 0: Memory at b363a000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3639000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:19.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #1 (rev 0b)
|
||||
Region 0: Memory at b3638000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3637000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:19.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #2 (rev 0b)
|
||||
Region 0: Memory at b3636000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3635000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:19.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 (rev 0b)
|
||||
Region 0: Memory at b3634000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3633000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1a.0 Serial bus controller [0c80]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PWM Pin Controller (rev 0b)
|
||||
Region 0: Memory at b3632000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b3631000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1b.0 SD Host controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SDXC/MMC Host Controller (rev 0b)
|
||||
Region 0: Memory at b3630000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b362f000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1c.0 SD Host controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series eMMC Controller (rev 0b)
|
||||
Region 0: Memory at b362e000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b362d000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1e.0 SD Host controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SDIO Controller (rev 0b)
|
||||
Region 0: Memory at b362c000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at b362b000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1f.0 ISA bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Low Pin Count Interface (rev 0b)
|
||||
00:1f.1 SMBus: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller (rev 0b)
|
||||
Region 0: Memory at b362a000 (64-bit, non-prefetchable) [size=256]
|
||||
02:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
|
||||
Region 0: Memory at b3400000 (32-bit, non-prefetchable) [size=512K]
|
||||
Region 3: Memory at b3480000 (32-bit, non-prefetchable) [size=16K]
|
||||
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88W8897 [AVASTAR] 802.11ac Wireless
|
||||
Region 0: Memory at b3300000 (64-bit, prefetchable) [size=1M]
|
||||
Region 2: Memory at b3200000 (64-bit, prefetchable) [size=1M]
|
||||
</PCI_DEVICE>
|
||||
|
||||
<PCI_VID_PID>
|
||||
00:00.0 0600: 8086:5af0 (rev 0b)
|
||||
00:00.1 1180: 8086:5a8c (rev 0b)
|
||||
00:02.0 0300: 8086:5a84 (rev 0b)
|
||||
00:03.0 0480: 8086:5a88 (rev 0b)
|
||||
00:0e.0 0403: 8086:5a98 (rev 0b)
|
||||
00:0f.0 0780: 8086:5a9a (rev 0b)
|
||||
00:0f.1 0780: 8086:5a9c (rev 0b)
|
||||
00:0f.2 0780: 8086:5a9e (rev 0b)
|
||||
00:11.0 0050: 8086:5aa2 (rev 0b)
|
||||
00:12.0 0106: 8086:5ae3 (rev 0b)
|
||||
00:13.0 0604: 8086:5ad8 (rev fb)
|
||||
00:13.2 0604: 8086:5ada (rev fb)
|
||||
00:13.3 0604: 8086:5adb (rev fb)
|
||||
00:14.0 0604: 8086:5ad6 (rev fb)
|
||||
00:15.0 0c03: 8086:5aa8 (rev 0b)
|
||||
00:15.1 0c03: 8086:5aaa (rev 0b)
|
||||
00:16.0 1180: 8086:5aac (rev 0b)
|
||||
00:16.1 1180: 8086:5aae (rev 0b)
|
||||
00:16.2 1180: 8086:5ab0 (rev 0b)
|
||||
00:16.3 1180: 8086:5ab2 (rev 0b)
|
||||
00:17.0 1180: 8086:5ab4 (rev 0b)
|
||||
00:17.1 1180: 8086:5ab6 (rev 0b)
|
||||
00:17.2 1180: 8086:5ab8 (rev 0b)
|
||||
00:17.3 1180: 8086:5aba (rev 0b)
|
||||
00:18.0 1180: 8086:5abc (rev 0b)
|
||||
00:18.1 1180: 8086:5abe (rev 0b)
|
||||
00:18.2 1180: 8086:5ac0 (rev 0b)
|
||||
00:18.3 1180: 8086:5aee (rev 0b)
|
||||
00:19.0 1180: 8086:5ac2 (rev 0b)
|
||||
00:19.1 1180: 8086:5ac4 (rev 0b)
|
||||
00:19.2 1180: 8086:5ac6 (rev 0b)
|
||||
00:1a.0 0c80: 8086:5ac8 (rev 0b)
|
||||
00:1b.0 0805: 8086:5aca (rev 0b)
|
||||
00:1c.0 0805: 8086:5acc (rev 0b)
|
||||
00:1e.0 0805: 8086:5ad0 (rev 0b)
|
||||
00:1f.0 0601: 8086:5ae8 (rev 0b)
|
||||
00:1f.1 0c05: 8086:5ad4 (rev 0b)
|
||||
02:00.0 0200: 8086:1533 (rev 03)
|
||||
03:00.0 0200: 11ab:2b38
|
||||
</PCI_VID_PID>
|
||||
|
||||
<WAKE_VECTOR_INFO>
|
||||
#define WAKE_VECTOR_32 0x7AFDCEFCUL
|
||||
#define WAKE_VECTOR_64 0x7AFDCF08UL
|
||||
</WAKE_VECTOR_INFO>
|
||||
|
||||
<RESET_REGISTER_INFO>
|
||||
#define RESET_REGISTER_ADDRESS 0xCF9UL
|
||||
#define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define RESET_REGISTER_VALUE 0xeU
|
||||
</RESET_REGISTER_INFO>
|
||||
|
||||
<PM_INFO>
|
||||
#define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_EVT_BIT_WIDTH 0x20U
|
||||
#define PM1A_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1A_EVT_ADDRESS 0x400UL
|
||||
#define PM1A_EVT_ACCESS_SIZE 0x3U
|
||||
#define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_EVT_BIT_WIDTH 0x0U
|
||||
#define PM1B_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1B_EVT_ADDRESS 0x0UL
|
||||
#define PM1B_EVT_ACCESS_SIZE 0x0U
|
||||
#define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_CNT_BIT_WIDTH 0x10U
|
||||
#define PM1A_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1A_CNT_ADDRESS 0x404UL
|
||||
#define PM1A_CNT_ACCESS_SIZE 0x2U
|
||||
#define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_CNT_BIT_WIDTH 0x0U
|
||||
#define PM1B_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1B_CNT_ADDRESS 0x0UL
|
||||
#define PM1B_CNT_ACCESS_SIZE 0x0U
|
||||
</PM_INFO>
|
||||
|
||||
<S3_INFO>
|
||||
#define S3_PKG_VAL_PM1A 0x5U
|
||||
#define S3_PKG_VAL_PM1B 0U
|
||||
#define S3_PKG_RESERVED 0x0U
|
||||
</S3_INFO>
|
||||
|
||||
<S5_INFO>
|
||||
#define S5_PKG_VAL_PM1A 0x7U
|
||||
#define S5_PKG_VAL_PM1B 0U
|
||||
#define S5_PKG_RESERVED 0x0U
|
||||
</S5_INFO>
|
||||
|
||||
<DRHD_INFO>
|
||||
#define DRHD_COUNT 2U
|
||||
#define DRHD0_DEV_CNT 1U
|
||||
#define DRHD0_SEGMENT 0U
|
||||
#define DRHD0_FLAGS 0U
|
||||
#define DRHD0_REG_BASE 0xFED64000UL
|
||||
#define DRHD0_IGNORE false
|
||||
#define DRHD0_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE0_PATH 0x10U
|
||||
#define DRHD0_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD0_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD0_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD1_DEV_CNT 2U
|
||||
#define DRHD1_SEGMENT 0U
|
||||
#define DRHD1_FLAGS 1U
|
||||
#define DRHD1_REG_BASE 0xFED65000UL
|
||||
#define DRHD1_IGNORE false
|
||||
#define DRHD1_DEVSCOPE0_BUS 0xfaU
|
||||
#define DRHD1_DEVSCOPE0_PATH 0xf8U
|
||||
#define DRHD1_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE1_PATH 0xffU
|
||||
#define DRHD1_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD1_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD1_IOAPIC_ID 8U
|
||||
#define DRHD2_DEV_CNT 0U
|
||||
#define DRHD2_SEGMENT 0U
|
||||
#define DRHD2_FLAGS 0U
|
||||
#define DRHD2_REG_BASE 0x00UL
|
||||
#define DRHD2_IGNORE false
|
||||
#define DRHD2_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE0_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD3_DEV_CNT 0U
|
||||
#define DRHD3_SEGMENT 0U
|
||||
#define DRHD3_FLAGS 0U
|
||||
#define DRHD3_REG_BASE 0x00UL
|
||||
#define DRHD3_IGNORE false
|
||||
#define DRHD3_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE0_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE3_PATH 0x0U
|
||||
</DRHD_INFO>
|
||||
|
||||
<CPU_BRAND>
|
||||
"Intel(R) Atom(TM) Processor A3960 @ 1.90GHz"
|
||||
</CPU_BRAND>
|
||||
|
||||
<CX_INFO>
|
||||
{{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, /* C1 */
|
||||
{{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x415UL}, 0x02U, 0x32U, 0x00U}, /* C2 */
|
||||
{{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x419UL}, 0x03U, 0x96U, 0x00U}, /* C3 */
|
||||
</CX_INFO>
|
||||
|
||||
<PX_INFO>
|
||||
{0x960UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001800UL, 0x001800UL}, /* P0 */
|
||||
{0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, /* P1 */
|
||||
{0x898UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001600UL, 0x001600UL}, /* P2 */
|
||||
{0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, /* P3 */
|
||||
{0x7D0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001400UL, 0x001400UL}, /* P4 */
|
||||
{0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, /* P5 */
|
||||
{0x708UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001200UL, 0x001200UL}, /* P6 */
|
||||
{0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, /* P7 */
|
||||
{0x640UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001000UL, 0x001000UL}, /* P8 */
|
||||
{0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, /* P9 */
|
||||
{0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, /* P10 */
|
||||
{0x514UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000D00UL, 0x000D00UL}, /* P11 */
|
||||
{0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, /* P12 */
|
||||
{0x44CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000B00UL, 0x000B00UL}, /* P13 */
|
||||
{0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, /* P14 */
|
||||
{0x384UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000900UL, 0x000900UL}, /* P15 */
|
||||
{0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, /* P16 */
|
||||
</PX_INFO>
|
||||
|
||||
<CLOS_INFO>
|
||||
clos supported by cache:L2
|
||||
clos max:4
|
||||
</CLOS_INFO>
|
||||
|
||||
<SYSTEM_RAM_INFO>
|
||||
00001000-00097fff : System RAM
|
||||
00100000-0fffffff : System RAM
|
||||
12200000-7afd5fff : System RAM
|
||||
100000000-27fffffff : System RAM
|
||||
</SYSTEM_RAM_INFO>
|
||||
|
||||
<ROOT_DEVICE_INFO>
|
||||
/dev/mmcblk1p1: UUID="57f8f4bc-abf4-655f-bf67-946fc0f9f25b" TYPE="ext4" PARTLABEL="sos_rootfs" PARTUUID="5bd5afa7-ab7e-46f3-85ad-0cfd285d5d76"
|
||||
/dev/mmcblk0p1: TYPE="ext4"
|
||||
/dev/sda3: TYPE="ext4"
|
||||
</ROOT_DEVICE_INFO>
|
||||
|
||||
<TTYS_INFO>
|
||||
BDF:(00:18.0) seri:/dev/ttyS0 base:0xB3640000 irq:4
|
||||
BDF:(00:18.2) seri:/dev/ttyS2 base:0x80E00000 irq:6
|
||||
BDF:(00:18.3) seri:/dev/ttyS3 base:0xB363A000 irq:7
|
||||
</TTYS_INFO>
|
||||
|
||||
<AVAILABLE_IRQ_INFO>
|
||||
10, 11, 12, 13, 15
|
||||
</AVAILABLE_IRQ_INFO>
|
||||
|
||||
<TOTAL_MEM_INFO>
|
||||
8034944 kB
|
||||
</TOTAL_MEM_INFO>
|
||||
|
||||
<CPU_PROCESSOR_INFO>
|
||||
0, 1, 2, 3
|
||||
</CPU_PROCESSOR_INFO>
|
||||
|
||||
</acrn-config>
|
||||
298
misc/acrn-config/xmls/board-xmls/apl-up2.xml
Normal file
298
misc/acrn-config/xmls/board-xmls/apl-up2.xml
Normal file
@ -0,0 +1,298 @@
|
||||
<acrn-config board="apl-up2">
|
||||
<BIOS_INFO>
|
||||
BIOS Information
|
||||
Vendor: American Megatrends Inc.
|
||||
Version: UPA1AM40
|
||||
Release Date: 08/06/2018
|
||||
BIOS Revision: 5.12
|
||||
</BIOS_INFO>
|
||||
|
||||
<BASE_BOARD_INFO>
|
||||
Base Board Information
|
||||
Manufacturer: AAEON
|
||||
Product Name: UP-APL01
|
||||
Version: V0.4
|
||||
</BASE_BOARD_INFO>
|
||||
|
||||
<PCI_DEVICE>
|
||||
00:00.0 Host bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Host Bridge (rev 0b)
|
||||
00:02.0 VGA compatible controller: Intel Corporation Device 5a85 (rev 0b)
|
||||
Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
|
||||
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
|
||||
00:0e.0 Multimedia audio controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster (rev 0b)
|
||||
Region 0: Memory at 91510000 (64-bit, non-prefetchable) [size=16K]
|
||||
Region 4: Memory at 91200000 (64-bit, non-prefetchable) [size=1M]
|
||||
00:0f.0 Communication controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Trusted Execution Engine (rev 0b)
|
||||
Region 0: Memory at 9153c000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller (rev 0b)
|
||||
Region 0: Memory at 91514000 (32-bit, non-prefetchable) [size=8K]
|
||||
Region 1: Memory at 91539000 (32-bit, non-prefetchable) [size=256]
|
||||
Region 5: Memory at 91538000 (32-bit, non-prefetchable) [size=2K]
|
||||
00:13.0 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #1 (rev fb)
|
||||
00:13.1 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #2 (rev fb)
|
||||
00:13.2 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #3 (rev fb)
|
||||
00:13.3 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #4 (rev fb)
|
||||
00:14.0 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #1 (rev fb)
|
||||
00:14.1 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port B #2 (rev fb)
|
||||
00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI (rev 0b)
|
||||
Region 0: Memory at 91500000 (64-bit, non-prefetchable) [size=64K]
|
||||
00:15.1 USB controller: Intel Corporation Device 5aaa (rev 0b)
|
||||
Region 0: Memory at 91000000 (64-bit, non-prefetchable) [size=2M]
|
||||
Region 2: Memory at 91537000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:16.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #1 (rev 0b)
|
||||
Region 0: Memory at 91536000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91535000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:16.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #2 (rev 0b)
|
||||
Region 0: Memory at 91534000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91533000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:16.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #3 (rev 0b)
|
||||
Region 0: Memory at 91532000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91531000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:16.3 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #4 (rev 0b)
|
||||
Region 0: Memory at 91530000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 9152f000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:17.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #5 (rev 0b)
|
||||
Region 0: Memory at 9152e000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 9152d000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:17.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #6 (rev 0b)
|
||||
Region 0: Memory at 9152c000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 9152b000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:17.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #7 (rev 0b)
|
||||
Region 0: Memory at 9152a000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91529000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:17.3 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #8 (rev 0b)
|
||||
Region 0: Memory at 91528000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91527000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:18.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #1 (rev 0b)
|
||||
Region 0: Memory at 91526000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91525000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:18.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #2 (rev 0b)
|
||||
Region 0: Memory at 91524000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91523000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:19.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #1 (rev 0b)
|
||||
Region 0: Memory at 91522000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91521000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:19.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #2 (rev 0b)
|
||||
Region 0: Memory at 91520000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 9151f000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:19.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 (rev 0b)
|
||||
Region 0: Memory at 9151e000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 9151d000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1a.0 Serial bus controller [0c80]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PWM Pin Controller (rev 0b)
|
||||
Region 0: Memory at 9151c000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 9151b000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1c.0 SD Host controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series eMMC Controller (rev 0b)
|
||||
Region 0: Memory at 9151a000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91519000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1e.0 SD Host controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SDIO Controller (rev 0b)
|
||||
Region 0: Memory at 91518000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91517000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1f.0 ISA bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Low Pin Count Interface (rev 0b)
|
||||
00:1f.1 SMBus: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller (rev 0b)
|
||||
Region 0: Memory at 91516000 (64-bit, non-prefetchable) [size=256]
|
||||
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
|
||||
Region 2: Memory at 91404000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 4: Memory at 91400000 (64-bit, prefetchable) [size=16K]
|
||||
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
|
||||
Region 2: Memory at 91304000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 4: Memory at 91300000 (64-bit, prefetchable) [size=16K]
|
||||
</PCI_DEVICE>
|
||||
|
||||
<PCI_VID_PID>
|
||||
00:00.0 0600: 8086:5af0 (rev 0b)
|
||||
00:02.0 0300: 8086:5a85 (rev 0b)
|
||||
00:0e.0 0401: 8086:5a98 (rev 0b)
|
||||
00:0f.0 0780: 8086:5a9a (rev 0b)
|
||||
00:12.0 0106: 8086:5ae3 (rev 0b)
|
||||
00:13.0 0604: 8086:5ad8 (rev fb)
|
||||
00:13.1 0604: 8086:5ad9 (rev fb)
|
||||
00:13.2 0604: 8086:5ada (rev fb)
|
||||
00:13.3 0604: 8086:5adb (rev fb)
|
||||
00:14.0 0604: 8086:5ad6 (rev fb)
|
||||
00:14.1 0604: 8086:5ad7 (rev fb)
|
||||
00:15.0 0c03: 8086:5aa8 (rev 0b)
|
||||
00:15.1 0c03: 8086:5aaa (rev 0b)
|
||||
00:16.0 1180: 8086:5aac (rev 0b)
|
||||
00:16.1 1180: 8086:5aae (rev 0b)
|
||||
00:16.2 1180: 8086:5ab0 (rev 0b)
|
||||
00:16.3 1180: 8086:5ab2 (rev 0b)
|
||||
00:17.0 1180: 8086:5ab4 (rev 0b)
|
||||
00:17.1 1180: 8086:5ab6 (rev 0b)
|
||||
00:17.2 1180: 8086:5ab8 (rev 0b)
|
||||
00:17.3 1180: 8086:5aba (rev 0b)
|
||||
00:18.0 1180: 8086:5abc (rev 0b)
|
||||
00:18.1 1180: 8086:5abe (rev 0b)
|
||||
00:19.0 1180: 8086:5ac2 (rev 0b)
|
||||
00:19.1 1180: 8086:5ac4 (rev 0b)
|
||||
00:19.2 1180: 8086:5ac6 (rev 0b)
|
||||
00:1a.0 0c80: 8086:5ac8 (rev 0b)
|
||||
00:1c.0 0805: 8086:5acc (rev 0b)
|
||||
00:1e.0 0805: 8086:5ad0 (rev 0b)
|
||||
00:1f.0 0601: 8086:5ae8 (rev 0b)
|
||||
00:1f.1 0c05: 8086:5ad4 (rev 0b)
|
||||
02:00.0 0200: 10ec:8168 (rev 0c)
|
||||
03:00.0 0200: 10ec:8168 (rev 0c)
|
||||
</PCI_VID_PID>
|
||||
|
||||
<WAKE_VECTOR_INFO>
|
||||
#define WAKE_VECTOR_32 0x79CB308CUL
|
||||
#define WAKE_VECTOR_64 0x79CB3098UL
|
||||
</WAKE_VECTOR_INFO>
|
||||
|
||||
<RESET_REGISTER_INFO>
|
||||
#define RESET_REGISTER_ADDRESS 0xCF9UL
|
||||
#define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define RESET_REGISTER_VALUE 0x6U
|
||||
</RESET_REGISTER_INFO>
|
||||
|
||||
<PM_INFO>
|
||||
#define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_EVT_BIT_WIDTH 0x20U
|
||||
#define PM1A_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1A_EVT_ADDRESS 0x400UL
|
||||
#define PM1A_EVT_ACCESS_SIZE 0x2U
|
||||
#define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_EVT_BIT_WIDTH 0x0U
|
||||
#define PM1B_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1B_EVT_ADDRESS 0x0UL
|
||||
#define PM1B_EVT_ACCESS_SIZE 0x2U
|
||||
#define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_CNT_BIT_WIDTH 0x10U
|
||||
#define PM1A_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1A_CNT_ADDRESS 0x404UL
|
||||
#define PM1A_CNT_ACCESS_SIZE 0x2U
|
||||
#define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_CNT_BIT_WIDTH 0x0U
|
||||
#define PM1B_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1B_CNT_ADDRESS 0x0UL
|
||||
#define PM1B_CNT_ACCESS_SIZE 0x2U
|
||||
</PM_INFO>
|
||||
|
||||
<S3_INFO>
|
||||
#define S3_PKG_VAL_PM1A 0x5U
|
||||
#define S3_PKG_VAL_PM1B 0U
|
||||
#define S3_PKG_RESERVED 0x0U
|
||||
</S3_INFO>
|
||||
|
||||
<S5_INFO>
|
||||
#define S5_PKG_VAL_PM1A 0x7U
|
||||
#define S5_PKG_VAL_PM1B 0U
|
||||
#define S5_PKG_RESERVED 0x0U
|
||||
</S5_INFO>
|
||||
|
||||
<DRHD_INFO>
|
||||
#define DRHD_COUNT 2U
|
||||
#define DRHD0_DEV_CNT 1U
|
||||
#define DRHD0_SEGMENT 0U
|
||||
#define DRHD0_FLAGS 0U
|
||||
#define DRHD0_REG_BASE 0xFED64000UL
|
||||
#define DRHD0_IGNORE false
|
||||
#define DRHD0_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE0_PATH 0x10U
|
||||
#define DRHD0_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD0_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD0_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD1_DEV_CNT 2U
|
||||
#define DRHD1_SEGMENT 0U
|
||||
#define DRHD1_FLAGS 1U
|
||||
#define DRHD1_REG_BASE 0xFED65000UL
|
||||
#define DRHD1_IGNORE false
|
||||
#define DRHD1_DEVSCOPE0_BUS 0xfaU
|
||||
#define DRHD1_DEVSCOPE0_PATH 0xf8U
|
||||
#define DRHD1_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE1_PATH 0xffU
|
||||
#define DRHD1_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD1_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD1_IOAPIC_ID 1U
|
||||
#define DRHD2_DEV_CNT 0U
|
||||
#define DRHD2_SEGMENT 0U
|
||||
#define DRHD2_FLAGS 0U
|
||||
#define DRHD2_REG_BASE 0x00UL
|
||||
#define DRHD2_IGNORE false
|
||||
#define DRHD2_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE0_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD3_DEV_CNT 0U
|
||||
#define DRHD3_SEGMENT 0U
|
||||
#define DRHD3_FLAGS 0U
|
||||
#define DRHD3_REG_BASE 0x00UL
|
||||
#define DRHD3_IGNORE false
|
||||
#define DRHD3_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE0_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE3_PATH 0x0U
|
||||
</DRHD_INFO>
|
||||
|
||||
<CPU_BRAND>
|
||||
"Intel(R) Celeron(R) CPU N3350 @ 1.10GHz"
|
||||
</CPU_BRAND>
|
||||
|
||||
<CX_INFO>
|
||||
{{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, /* C1 */
|
||||
{{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x415UL}, 0x02U, 0x32U, 0x00U}, /* C2 */
|
||||
{{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x419UL}, 0x03U, 0x96U, 0x00U}, /* C3 */
|
||||
</CX_INFO>
|
||||
|
||||
<PX_INFO>
|
||||
{0x44DUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001800UL, 0x001800UL}, /* P0 */
|
||||
{0x44CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000B00UL, 0x000B00UL}, /* P1 */
|
||||
{0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, /* P2 */
|
||||
{0x384UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000900UL, 0x000900UL}, /* P3 */
|
||||
{0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, /* P4 */
|
||||
</PX_INFO>
|
||||
|
||||
<CLOS_INFO>
|
||||
clos supported by cache:L2
|
||||
clos max:4
|
||||
</CLOS_INFO>
|
||||
|
||||
<SYSTEM_RAM_INFO>
|
||||
00001000-0003efff : System RAM
|
||||
00040000-0009dfff : System RAM
|
||||
00100000-0fffffff : System RAM
|
||||
12151000-7074c017 : System RAM
|
||||
7074c018-7075c057 : System RAM
|
||||
7075c058-77b30fff : System RAM
|
||||
7a09d000-7a40afff : System RAM
|
||||
7a426000-7a964fff : System RAM
|
||||
7a967000-7affffff : System RAM
|
||||
100000000-17fffffff : System RAM
|
||||
</SYSTEM_RAM_INFO>
|
||||
|
||||
<ROOT_DEVICE_INFO>
|
||||
/dev/mmcblk0p3: UUID="bb0d14f3-e780-41d9-bcca-6f3ef493216c" TYPE="ext4" PARTLABEL="primary" PARTUUID="87cd7180-6c0b-4bc9-a0d0-5406a95988cc"
|
||||
/dev/sda3: TYPE="ext4"
|
||||
</ROOT_DEVICE_INFO>
|
||||
|
||||
<TTYS_INFO>
|
||||
BDF:(00:18.0) seri:/dev/ttyS0 base:0x91526000 irq:4
|
||||
BDF:(00:18.1) seri:/dev/ttyS1 base:0x91524000 irq:5
|
||||
</TTYS_INFO>
|
||||
|
||||
<AVAILABLE_IRQ_INFO>
|
||||
3, 6, 7, 10, 11, 12, 13, 15
|
||||
</AVAILABLE_IRQ_INFO>
|
||||
|
||||
<TOTAL_MEM_INFO>
|
||||
3874760 kB
|
||||
</TOTAL_MEM_INFO>
|
||||
|
||||
<CPU_PROCESSOR_INFO>
|
||||
0, 1
|
||||
</CPU_PROCESSOR_INFO>
|
||||
|
||||
</acrn-config>
|
||||
254
misc/acrn-config/xmls/board-xmls/nuc6cayh.xml
Normal file
254
misc/acrn-config/xmls/board-xmls/nuc6cayh.xml
Normal file
@ -0,0 +1,254 @@
|
||||
<acrn-config board="nuc6cayh">
|
||||
<BIOS_INFO>
|
||||
BIOS Information
|
||||
Vendor: Intel Corp.
|
||||
Version: AYAPLCEL.86A.0063.2019.0621.1450
|
||||
Release Date: 06/21/2019
|
||||
BIOS Revision: 5.6
|
||||
</BIOS_INFO>
|
||||
|
||||
<BASE_BOARD_INFO>
|
||||
Base Board Information
|
||||
Manufacturer: Intel Corporation
|
||||
Product Name: NUC6CAYB
|
||||
Version: J23203-404
|
||||
</BASE_BOARD_INFO>
|
||||
|
||||
<PCI_DEVICE>
|
||||
00:00.0 Host bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Host Bridge (rev 0b)
|
||||
00:02.0 VGA compatible controller: Intel Corporation Device 5a85 (rev 0b)
|
||||
Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
|
||||
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
|
||||
00:0e.0 Audio device: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster (rev 0b)
|
||||
Region 0: Memory at 91410000 (64-bit, non-prefetchable) [size=16K]
|
||||
Region 4: Memory at 91000000 (64-bit, non-prefetchable) [size=1M]
|
||||
00:0f.0 Communication controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Trusted Execution Engine (rev 0b)
|
||||
Region 0: Memory at 91427000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:12.0 SATA controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SATA AHCI Controller (rev 0b)
|
||||
Region 0: Memory at 91414000 (32-bit, non-prefetchable) [size=8K]
|
||||
Region 1: Memory at 91424000 (32-bit, non-prefetchable) [size=256]
|
||||
Region 5: Memory at 91423000 (32-bit, non-prefetchable) [size=2K]
|
||||
00:13.0 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #1 (rev fb)
|
||||
00:13.1 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #2 (rev fb)
|
||||
00:13.2 PCI bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PCI Express Port A #3 (rev fb)
|
||||
00:15.0 USB controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series USB xHCI (rev 0b)
|
||||
Region 0: Memory at 91400000 (64-bit, non-prefetchable) [size=64K]
|
||||
00:16.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series I2C Controller #1 (rev 0b)
|
||||
Region 0: Memory at 91422000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91421000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:18.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series HSUART Controller #1 (rev 0b)
|
||||
Region 0: Memory at 91420000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 9141f000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:19.0 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #1 (rev 0b)
|
||||
Region 0: Memory at 9141e000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 9141d000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:19.1 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #2 (rev 0b)
|
||||
Region 0: Memory at 9141c000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 9141b000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:19.2 Signal processing controller: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SPI Controller #3 (rev 0b)
|
||||
Region 0: Memory at 9141a000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91419000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1a.0 Serial bus controller [0c80]: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series PWM Pin Controller (rev 0b)
|
||||
Region 0: Memory at 91418000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 2: Memory at 91417000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:1f.0 ISA bridge: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series Low Pin Count Interface (rev 0b)
|
||||
00:1f.1 SMBus: Intel Corporation Celeron N3350/Pentium N4200/Atom E3900 Series SMBus Controller (rev 0b)
|
||||
Region 0: Memory at 91416000 (64-bit, non-prefetchable) [size=256]
|
||||
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
|
||||
Region 0: Memory at 91300000 (32-bit, non-prefetchable) [size=4K]
|
||||
02:00.0 Network controller: Intel Corporation Device 24fb (rev 10)
|
||||
Region 0: Memory at 91200000 (64-bit, non-prefetchable) [size=8K]
|
||||
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
|
||||
Region 2: Memory at 91104000 (64-bit, non-prefetchable) [size=4K]
|
||||
Region 4: Memory at 91100000 (64-bit, non-prefetchable) [size=16K]
|
||||
</PCI_DEVICE>
|
||||
|
||||
<PCI_VID_PID>
|
||||
00:00.0 0600: 8086:5af0 (rev 0b)
|
||||
00:02.0 0300: 8086:5a85 (rev 0b)
|
||||
00:0e.0 0403: 8086:5a98 (rev 0b)
|
||||
00:0f.0 0780: 8086:5a9a (rev 0b)
|
||||
00:12.0 0106: 8086:5ae3 (rev 0b)
|
||||
00:13.0 0604: 8086:5ad8 (rev fb)
|
||||
00:13.1 0604: 8086:5ad9 (rev fb)
|
||||
00:13.2 0604: 8086:5ada (rev fb)
|
||||
00:15.0 0c03: 8086:5aa8 (rev 0b)
|
||||
00:16.0 1180: 8086:5aac (rev 0b)
|
||||
00:18.0 1180: 8086:5abc (rev 0b)
|
||||
00:19.0 1180: 8086:5ac2 (rev 0b)
|
||||
00:19.1 1180: 8086:5ac4 (rev 0b)
|
||||
00:19.2 1180: 8086:5ac6 (rev 0b)
|
||||
00:1a.0 0c80: 8086:5ac8 (rev 0b)
|
||||
00:1f.0 0601: 8086:5ae8 (rev 0b)
|
||||
00:1f.1 0c05: 8086:5ad4 (rev 0b)
|
||||
01:00.0 ff00: 10ec:5229 (rev 01)
|
||||
02:00.0 0280: 8086:24fb (rev 10)
|
||||
03:00.0 0200: 10ec:8168 (rev 15)
|
||||
</PCI_VID_PID>
|
||||
|
||||
<WAKE_VECTOR_INFO>
|
||||
#define WAKE_VECTOR_32 0x7962108CUL
|
||||
#define WAKE_VECTOR_64 0x79621098UL
|
||||
</WAKE_VECTOR_INFO>
|
||||
|
||||
<RESET_REGISTER_INFO>
|
||||
#define RESET_REGISTER_ADDRESS 0xCF9UL
|
||||
#define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define RESET_REGISTER_VALUE 0x6U
|
||||
</RESET_REGISTER_INFO>
|
||||
|
||||
<PM_INFO>
|
||||
#define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_EVT_BIT_WIDTH 0x20U
|
||||
#define PM1A_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1A_EVT_ADDRESS 0x400UL
|
||||
#define PM1A_EVT_ACCESS_SIZE 0x2U
|
||||
#define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_EVT_BIT_WIDTH 0x0U
|
||||
#define PM1B_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1B_EVT_ADDRESS 0x0UL
|
||||
#define PM1B_EVT_ACCESS_SIZE 0x2U
|
||||
#define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_CNT_BIT_WIDTH 0x10U
|
||||
#define PM1A_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1A_CNT_ADDRESS 0x404UL
|
||||
#define PM1A_CNT_ACCESS_SIZE 0x2U
|
||||
#define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_CNT_BIT_WIDTH 0x0U
|
||||
#define PM1B_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1B_CNT_ADDRESS 0x0UL
|
||||
#define PM1B_CNT_ACCESS_SIZE 0x2U
|
||||
</PM_INFO>
|
||||
|
||||
<S3_INFO>
|
||||
#define S3_PKG_VAL_PM1A 0x5U
|
||||
#define S3_PKG_VAL_PM1B 0U
|
||||
#define S3_PKG_RESERVED 0x0U
|
||||
</S3_INFO>
|
||||
|
||||
<S5_INFO>
|
||||
#define S5_PKG_VAL_PM1A 0x7U
|
||||
#define S5_PKG_VAL_PM1B 0U
|
||||
#define S5_PKG_RESERVED 0x0U
|
||||
</S5_INFO>
|
||||
|
||||
<DRHD_INFO>
|
||||
#define DRHD_COUNT 2U
|
||||
#define DRHD0_DEV_CNT 1U
|
||||
#define DRHD0_SEGMENT 0U
|
||||
#define DRHD0_FLAGS 0U
|
||||
#define DRHD0_REG_BASE 0xFED64000UL
|
||||
#define DRHD0_IGNORE false
|
||||
#define DRHD0_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE0_PATH 0x10U
|
||||
#define DRHD0_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD0_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD0_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD1_DEV_CNT 2U
|
||||
#define DRHD1_SEGMENT 0U
|
||||
#define DRHD1_FLAGS 1U
|
||||
#define DRHD1_REG_BASE 0xFED65000UL
|
||||
#define DRHD1_IGNORE false
|
||||
#define DRHD1_DEVSCOPE0_BUS 0xfaU
|
||||
#define DRHD1_DEVSCOPE0_PATH 0xf8U
|
||||
#define DRHD1_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE1_PATH 0xffU
|
||||
#define DRHD1_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD1_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD1_IOAPIC_ID 1U
|
||||
#define DRHD2_DEV_CNT 0U
|
||||
#define DRHD2_SEGMENT 0U
|
||||
#define DRHD2_FLAGS 0U
|
||||
#define DRHD2_REG_BASE 0x00UL
|
||||
#define DRHD2_IGNORE false
|
||||
#define DRHD2_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE0_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD3_DEV_CNT 0U
|
||||
#define DRHD3_SEGMENT 0U
|
||||
#define DRHD3_FLAGS 0U
|
||||
#define DRHD3_REG_BASE 0x00UL
|
||||
#define DRHD3_IGNORE false
|
||||
#define DRHD3_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE0_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE3_PATH 0x0U
|
||||
</DRHD_INFO>
|
||||
|
||||
<CPU_BRAND>
|
||||
"Intel(R) Celeron(R) CPU J3455 @ 1.50GHz"
|
||||
</CPU_BRAND>
|
||||
|
||||
<CX_INFO>
|
||||
{{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, /* C1 */
|
||||
{{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x415UL}, 0x02U, 0x32U, 0x00U}, /* C2 */
|
||||
{{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x419UL}, 0x03U, 0x96U, 0x00U}, /* C3 */
|
||||
</CX_INFO>
|
||||
|
||||
<PX_INFO>
|
||||
{0x5DDUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, /* P0 */
|
||||
{0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, /* P1 */
|
||||
{0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, /* P2 */
|
||||
{0x514UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000D00UL, 0x000D00UL}, /* P3 */
|
||||
{0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, /* P4 */
|
||||
{0x44CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000B00UL, 0x000B00UL}, /* P5 */
|
||||
{0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, /* P6 */
|
||||
{0x384UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000900UL, 0x000900UL}, /* P7 */
|
||||
{0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, /* P8 */
|
||||
</PX_INFO>
|
||||
|
||||
<CLOS_INFO>
|
||||
clos supported by cache:L2
|
||||
clos max:4
|
||||
</CLOS_INFO>
|
||||
|
||||
<SYSTEM_RAM_INFO>
|
||||
00001000-0003efff : System RAM
|
||||
00040000-0009efff : System RAM
|
||||
00100000-0fffffff : System RAM
|
||||
12151000-6ff60017 : System RAM
|
||||
6ff60018-6ff6e057 : System RAM
|
||||
6ff6e058-6ff6f017 : System RAM
|
||||
6ff6f018-6ff7f057 : System RAM
|
||||
6ff7f058-7710dfff : System RAM
|
||||
799f6000-79d78fff : System RAM
|
||||
79da4000-7a9defff : System RAM
|
||||
7a9e1000-7affffff : System RAM
|
||||
100000000-27fffffff : System RAM
|
||||
</SYSTEM_RAM_INFO>
|
||||
|
||||
<ROOT_DEVICE_INFO>
|
||||
/dev/sda3: LABEL="root" UUID="b8352fb7-25f5-481d-aa6f-015a7c76c5aa" TYPE="ext4" PARTLABEL="/" PARTUUID="9a305316-3c78-436c-9c21-3be1b324428d"
|
||||
</ROOT_DEVICE_INFO>
|
||||
|
||||
<TTYS_INFO>
|
||||
BDF:(00:18.0) seri:/dev/ttyS0 base:0x91420000 irq:4
|
||||
</TTYS_INFO>
|
||||
|
||||
<AVAILABLE_IRQ_INFO>
|
||||
3, 5, 6, 7, 10, 11, 12, 13, 15
|
||||
</AVAILABLE_IRQ_INFO>
|
||||
|
||||
<TOTAL_MEM_INFO>
|
||||
8062792 kB
|
||||
</TOTAL_MEM_INFO>
|
||||
|
||||
<CPU_PROCESSOR_INFO>
|
||||
0, 1, 2, 3
|
||||
</CPU_PROCESSOR_INFO>
|
||||
|
||||
</acrn-config>
|
||||
250
misc/acrn-config/xmls/board-xmls/nuc7i7dnb.xml
Normal file
250
misc/acrn-config/xmls/board-xmls/nuc7i7dnb.xml
Normal file
@ -0,0 +1,250 @@
|
||||
<acrn-config board="nuc7i7dnb">
|
||||
<BIOS_INFO>
|
||||
BIOS Information
|
||||
Vendor: Intel Corp.
|
||||
Version: DNKBLi7v.86A.0065.2019.0611.1424
|
||||
Release Date: 06/11/2019
|
||||
BIOS Revision: 5.6
|
||||
</BIOS_INFO>
|
||||
|
||||
<BASE_BOARD_INFO>
|
||||
Base Board Information
|
||||
Manufacturer: Intel Corporation
|
||||
Product Name: NUC7i7DNB
|
||||
Version: J83500-204
|
||||
</BASE_BOARD_INFO>
|
||||
|
||||
<PCI_DEVICE>
|
||||
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
|
||||
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
|
||||
Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
|
||||
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
|
||||
00:08.0 System peripheral: Intel Corporation Skylake Gaussian Mixture Model
|
||||
Region 0: Memory at df252000 (64-bit, non-prefetchable) [disabled] [size=4K]
|
||||
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
|
||||
Region 0: Memory at df230000 (64-bit, non-prefetchable) [size=64K]
|
||||
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
|
||||
Region 0: Memory at df251000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
|
||||
Region 0: Memory at df250000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
|
||||
Region 0: Memory at df24f000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
|
||||
Region 0: Memory at df24e000 (64-bit, non-prefetchable) [size=4K]
|
||||
00:16.3 Serial controller: Intel Corporation Device 9d3d (rev 21)
|
||||
Region 1: Memory at df24d000 (32-bit, non-prefetchable) [size=4K]
|
||||
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
|
||||
Region 0: Memory at df248000 (32-bit, non-prefetchable) [size=8K]
|
||||
Region 1: Memory at df24c000 (32-bit, non-prefetchable) [size=256]
|
||||
Region 5: Memory at df24b000 (32-bit, non-prefetchable) [size=2K]
|
||||
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)
|
||||
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
|
||||
00:1f.0 ISA bridge: Intel Corporation Device 9d4e (rev 21)
|
||||
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
|
||||
Region 0: Memory at df244000 (32-bit, non-prefetchable) [size=16K]
|
||||
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
|
||||
Region 0: Memory at df240000 (64-bit, non-prefetchable) [size=16K]
|
||||
Region 4: Memory at df220000 (64-bit, non-prefetchable) [size=64K]
|
||||
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
|
||||
Region 0: Memory at df24a000 (64-bit, non-prefetchable) [size=256]
|
||||
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-LM (rev 21)
|
||||
Region 0: Memory at df200000 (32-bit, non-prefetchable) [size=128K]
|
||||
01:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
|
||||
Region 0: Memory at df100000 (64-bit, non-prefetchable) [size=8K]
|
||||
02:00.0 Non-Volatile memory controller: Intel Corporation Device f1a6 (rev 03)
|
||||
Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=16K]
|
||||
</PCI_DEVICE>
|
||||
|
||||
<PCI_VID_PID>
|
||||
00:00.0 0600: 8086:5914 (rev 08)
|
||||
00:02.0 0300: 8086:5917 (rev 07)
|
||||
00:08.0 0880: 8086:1911
|
||||
00:14.0 0c03: 8086:9d2f (rev 21)
|
||||
00:14.2 1180: 8086:9d31 (rev 21)
|
||||
00:15.0 1180: 8086:9d60 (rev 21)
|
||||
00:15.1 1180: 8086:9d61 (rev 21)
|
||||
00:16.0 0780: 8086:9d3a (rev 21)
|
||||
00:16.3 0700: 8086:9d3d (rev 21)
|
||||
00:17.0 0106: 8086:9d03 (rev 21)
|
||||
00:1c.0 0604: 8086:9d12 (rev f1)
|
||||
00:1d.0 0604: 8086:9d18 (rev f1)
|
||||
00:1f.0 0601: 8086:9d4e (rev 21)
|
||||
00:1f.2 0580: 8086:9d21 (rev 21)
|
||||
00:1f.3 0403: 8086:9d71 (rev 21)
|
||||
00:1f.4 0c05: 8086:9d23 (rev 21)
|
||||
00:1f.6 0200: 8086:156f (rev 21)
|
||||
01:00.0 0280: 8086:24fd (rev 78)
|
||||
02:00.0 0108: 8086:f1a6 (rev 03)
|
||||
</PCI_VID_PID>
|
||||
|
||||
<WAKE_VECTOR_INFO>
|
||||
#define WAKE_VECTOR_32 0x7FA22F8CUL
|
||||
#define WAKE_VECTOR_64 0x7FA22F98UL
|
||||
</WAKE_VECTOR_INFO>
|
||||
|
||||
<RESET_REGISTER_INFO>
|
||||
#define RESET_REGISTER_ADDRESS 0xCF9UL
|
||||
#define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define RESET_REGISTER_VALUE 0x6U
|
||||
</RESET_REGISTER_INFO>
|
||||
|
||||
<PM_INFO>
|
||||
#define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_EVT_BIT_WIDTH 0x20U
|
||||
#define PM1A_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1A_EVT_ADDRESS 0x1800UL
|
||||
#define PM1A_EVT_ACCESS_SIZE 0x2U
|
||||
#define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_EVT_BIT_WIDTH 0x0U
|
||||
#define PM1B_EVT_BIT_OFFSET 0x0U
|
||||
#define PM1B_EVT_ADDRESS 0x0UL
|
||||
#define PM1B_EVT_ACCESS_SIZE 0x2U
|
||||
#define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1A_CNT_BIT_WIDTH 0x10U
|
||||
#define PM1A_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1A_CNT_ADDRESS 0x1804UL
|
||||
#define PM1A_CNT_ACCESS_SIZE 0x2U
|
||||
#define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO
|
||||
#define PM1B_CNT_BIT_WIDTH 0x0U
|
||||
#define PM1B_CNT_BIT_OFFSET 0x0U
|
||||
#define PM1B_CNT_ADDRESS 0x0UL
|
||||
#define PM1B_CNT_ACCESS_SIZE 0x2U
|
||||
</PM_INFO>
|
||||
|
||||
<S3_INFO>
|
||||
#define S3_PKG_VAL_PM1A 0x5U
|
||||
#define S3_PKG_VAL_PM1B 0U
|
||||
#define S3_PKG_RESERVED 0x0U
|
||||
</S3_INFO>
|
||||
|
||||
<S5_INFO>
|
||||
#define S5_PKG_VAL_PM1A 0x7U
|
||||
#define S5_PKG_VAL_PM1B 0U
|
||||
#define S5_PKG_RESERVED 0x0U
|
||||
</S5_INFO>
|
||||
|
||||
<DRHD_INFO>
|
||||
#define DRHD_COUNT 2U
|
||||
#define DRHD0_DEV_CNT 1U
|
||||
#define DRHD0_SEGMENT 0U
|
||||
#define DRHD0_FLAGS 0U
|
||||
#define DRHD0_REG_BASE 0xFED90000UL
|
||||
#define DRHD0_IGNORE false
|
||||
#define DRHD0_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE0_PATH 0x10U
|
||||
#define DRHD0_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD0_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD0_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD0_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD1_DEV_CNT 2U
|
||||
#define DRHD1_SEGMENT 0U
|
||||
#define DRHD1_FLAGS 1U
|
||||
#define DRHD1_REG_BASE 0xFED91000UL
|
||||
#define DRHD1_IGNORE false
|
||||
#define DRHD1_DEVSCOPE0_BUS 0xf0U
|
||||
#define DRHD1_DEVSCOPE0_PATH 0xf8U
|
||||
#define DRHD1_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE1_PATH 0xf8U
|
||||
#define DRHD1_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD1_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD1_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD1_IOAPIC_ID 2U
|
||||
#define DRHD2_DEV_CNT 0U
|
||||
#define DRHD2_SEGMENT 0U
|
||||
#define DRHD2_FLAGS 0U
|
||||
#define DRHD2_REG_BASE 0x00UL
|
||||
#define DRHD2_IGNORE false
|
||||
#define DRHD2_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE0_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD2_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD2_DEVSCOPE3_PATH 0x0U
|
||||
#define DRHD3_DEV_CNT 0U
|
||||
#define DRHD3_SEGMENT 0U
|
||||
#define DRHD3_FLAGS 0U
|
||||
#define DRHD3_REG_BASE 0x00UL
|
||||
#define DRHD3_IGNORE false
|
||||
#define DRHD3_DEVSCOPE0_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE0_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE1_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE1_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE2_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE2_PATH 0x0U
|
||||
#define DRHD3_DEVSCOPE3_BUS 0x0U
|
||||
#define DRHD3_DEVSCOPE3_PATH 0x0U
|
||||
</DRHD_INFO>
|
||||
|
||||
<CPU_BRAND>
|
||||
"Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz"
|
||||
</CPU_BRAND>
|
||||
|
||||
<CX_INFO>
|
||||
{{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, /* C1 */
|
||||
{{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, /* C2 */
|
||||
{{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, /* C3 */
|
||||
</CX_INFO>
|
||||
|
||||
<PX_INFO>
|
||||
{0x835UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002A00UL, 0x002A00UL}, /* P0 */
|
||||
{0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, /* P1 */
|
||||
{0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, /* P2 */
|
||||
{0x708UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001200UL, 0x001200UL}, /* P3 */
|
||||
{0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, /* P4 */
|
||||
{0x640UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001000UL, 0x001000UL}, /* P5 */
|
||||
{0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, /* P6 */
|
||||
{0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, /* P7 */
|
||||
{0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, /* P8 */
|
||||
{0x44CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000B00UL, 0x000B00UL}, /* P9 */
|
||||
{0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, /* P10 */
|
||||
{0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, /* P11 */
|
||||
{0x2BCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000700UL, 0x000700UL}, /* P12 */
|
||||
{0x258UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000600UL, 0x000600UL}, /* P13 */
|
||||
{0x1F4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000500UL, 0x000500UL}, /* P14 */
|
||||
{0x190UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000400UL, 0x000400UL}, /* P15 */
|
||||
</PX_INFO>
|
||||
|
||||
<CLOS_INFO>
|
||||
clos supported by cache:False
|
||||
clos max:0
|
||||
</CLOS_INFO>
|
||||
|
||||
<SYSTEM_RAM_INFO>
|
||||
00001000-00057fff : System RAM
|
||||
00059000-0009efff : System RAM
|
||||
00100000-3fffffff : System RAM
|
||||
40400000-764b8fff : System RAM
|
||||
764bb000-7f0f3fff : System RAM
|
||||
7ffff000-7fffffff : System RAM
|
||||
88000000-883fffff : System RAM
|
||||
100000000-2707fffff : System RAM
|
||||
</SYSTEM_RAM_INFO>
|
||||
|
||||
<ROOT_DEVICE_INFO>
|
||||
/dev/nvme0n1p3: LABEL="root" UUID="deb9eba1-9ab6-4d1e-95b9-aa1d2f7b660e" TYPE="ext4" PARTLABEL="/" PARTUUID="80521cfb-cce4-4ccc-8cf8-46a045196c73"
|
||||
/dev/sda3: TYPE="ext4"
|
||||
</ROOT_DEVICE_INFO>
|
||||
|
||||
<TTYS_INFO>
|
||||
BDF:(02:00.0) seri:/dev/ttyS0 base:0x3F8 irq:4
|
||||
BDF:(00:16.3) seri:/dev/ttyS4 base:0xF0A0 irq:19
|
||||
</TTYS_INFO>
|
||||
|
||||
<AVAILABLE_IRQ_INFO>
|
||||
3, 5, 6, 7, 10, 11, 12, 13, 15
|
||||
</AVAILABLE_IRQ_INFO>
|
||||
|
||||
<TOTAL_MEM_INFO>
|
||||
7898864 kB
|
||||
</TOTAL_MEM_INFO>
|
||||
|
||||
<CPU_PROCESSOR_INFO>
|
||||
0, 1, 2, 3
|
||||
</CPU_PROCESSOR_INFO>
|
||||
|
||||
</acrn-config>
|
||||
109
misc/acrn-config/xmls/config-xmls/apl-mrb/hybrid.xml
Normal file
109
misc/acrn-config/xmls/config-xmls/apl-mrb/hybrid.xml
Normal file
@ -0,0 +1,109 @@
|
||||
<acrn-config board="apl-mrb" scenario="hybrid">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">fc836901-8685-4bc0-8b71-6e31dc36fa47</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">Zephyr</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_ZEPHYR</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Zephyr_RawImage</kern_mod>
|
||||
<bootargs desc="Specify kernel boot arguments"></bootargs>
|
||||
<kern_load_addr desc="The loading address in host memory for the VM kernel">0x100000</kern_load_addr>
|
||||
<kern_entry_addr desc="The entry address in host memory for the VM kernel">0x100000</kern_entry_addr>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk1p1</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS2</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x6de00000 memmap=0x400000$0x6da00000 ramoops.mem_address=0x6da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
|
||||
reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_initial_modeset=1 i915.enable_guc=0x02 video=DP-1:d video=DP-2:d cma=64M@0- panic_print=0x1f
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
117
misc/acrn-config/xmls/config-xmls/apl-mrb/industry.xml
Normal file
117
misc/acrn-config/xmls/config-xmls/apl-mrb/industry.xml
Normal file
@ -0,0 +1,117 @@
|
||||
<acrn-config board="apl-mrb" scenario="industry">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk1p1</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS2</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x6de00000 memmap=0x400000$0x6da00000 ramoops.mem_address=0x6da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
|
||||
reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_initial_modeset=1 i915.enable_guc=0x02 video=DP-1:d video=DP-2:d cma=64M@0- panic_print=0x1f
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
@ -0,0 +1,94 @@
|
||||
<acrn-config board="apl-mrb" scenario="logical_partition">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">26c5e0d8-8f8a-47d8-8109-f201ebd61a5e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>2</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk1p1</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM0_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm0_pci_devs</pci_devs>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="vm_name">ACRN PRE-LAUNCHED VM1</name>
|
||||
<uuid configurable="0" desc="vm uuid">dd87ce08-66f9-473d-bc58-7605837f935e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_RT</guest_flag>
|
||||
<guest_flag>GUEST_FLAG_LAPIC_PASSTHROUGH</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>1</pcpu_id>
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x120000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM" readonly="true">VM0_MEM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="kernel name">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel" readonly="true">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M
|
||||
consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM1_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm1_pci_devs</pci_devs>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
90
misc/acrn-config/xmls/config-xmls/apl-mrb/sdc.xml
Normal file
90
misc/acrn-config/xmls/config-xmls/apl-mrb/sdc.xml
Normal file
@ -0,0 +1,90 @@
|
||||
<acrn-config board="apl-mrb" scenario="sdc">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk1p1</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS2</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x6de00000 memmap=0x400000$0x6da00000 ramoops.mem_address=0x6da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
|
||||
reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_initial_modeset=1 i915.enable_guc=0x02 video=DP-1:d video=DP-2:d cma=64M@0- panic_print=0x1f
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2" configurable="0" desc="specific for Kata">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
117
misc/acrn-config/xmls/config-xmls/apl-mrb/sdc2.xml
Normal file
117
misc/acrn-config/xmls/config-xmls/apl-mrb/sdc2.xml
Normal file
@ -0,0 +1,117 @@
|
||||
<acrn-config board="apl-mrb" scenario="sdc2">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk1p1</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS2</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x6de00000 memmap=0x400000$0x6da00000 ramoops.mem_address=0x6da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
|
||||
reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_initial_modeset=1 i915.enable_guc=0x02 video=DP-1:d video=DP-2:d cma=64M@0- panic_print=0x1f
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
109
misc/acrn-config/xmls/config-xmls/apl-up2/hybrid.xml
Normal file
109
misc/acrn-config/xmls/config-xmls/apl-up2/hybrid.xml
Normal file
@ -0,0 +1,109 @@
|
||||
<acrn-config board="apl-up2" scenario="hybrid">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">fc836901-8685-4bc0-8b71-6e31dc36fa47</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">Zephyr</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_ZEPHYR</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Zephyr_RawImage</kern_mod>
|
||||
<bootargs desc="Specify kernel boot arguments"></bootargs>
|
||||
<kern_load_addr desc="The loading address in host memory for the VM kernel">0x100000</kern_load_addr>
|
||||
<kern_entry_addr desc="The entry address in host memory for the VM kernel">0x100000</kern_entry_addr>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk0p3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x6de00000 memmap=0x400000$0x6da00000 ramoops.mem_address=0x6da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
|
||||
reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_guc=0x02 cma=64M@0-
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
117
misc/acrn-config/xmls/config-xmls/apl-up2/industry.xml
Normal file
117
misc/acrn-config/xmls/config-xmls/apl-up2/industry.xml
Normal file
@ -0,0 +1,117 @@
|
||||
<acrn-config board="apl-up2" scenario="industry">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk0p3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x6de00000 memmap=0x400000$0x6da00000 ramoops.mem_address=0x6da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
|
||||
reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_guc=0x02 cma=64M@0-
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
@ -0,0 +1,95 @@
|
||||
<acrn-config board="apl-up2" scenario="logical_partition">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">26c5e0d8-8f8a-47d8-8109-f201ebd61a5e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>2</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM0_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm0_pci_devs</pci_devs>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="vm_name">ACRN PRE-LAUNCHED VM1</name>
|
||||
<uuid configurable="0" desc="vm uuid">dd87ce08-66f9-473d-bc58-7605837f935e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_RT</guest_flag>
|
||||
<guest_flag>GUEST_FLAG_LAPIC_PASSTHROUGH</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>1</pcpu_id>
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0x120000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM" readonly="true">VM0_MEM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="kernel name">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel" readonly="true">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M
|
||||
consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM1_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm1_pci_devs</pci_devs>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
90
misc/acrn-config/xmls/config-xmls/apl-up2/sdc.xml
Normal file
90
misc/acrn-config/xmls/config-xmls/apl-up2/sdc.xml
Normal file
@ -0,0 +1,90 @@
|
||||
<acrn-config board="apl-up2" scenario="sdc">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk0p3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x6de00000 memmap=0x400000$0x6da00000 ramoops.mem_address=0x6da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
|
||||
reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_guc=0x02 cma=64M@0-
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2" configurable="0" desc="specific for Kata">
|
||||
<load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
117
misc/acrn-config/xmls/config-xmls/apl-up2/sdc2.xml
Normal file
117
misc/acrn-config/xmls/config-xmls/apl-up2/sdc2.xml
Normal file
@ -0,0 +1,117 @@
|
||||
<acrn-config board="apl-up2" scenario="sdc2">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/mmcblk0p3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x6de00000 memmap=0x400000$0x6da00000 ramoops.mem_address=0x6da00000 ramoops.mem_size=0x400000 ramoops.console_size=0x200000
|
||||
reboot_panic=p,w module_blacklist=dwc3_pci i915.enable_guc=0x02 cma=64M@0-
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
108
misc/acrn-config/xmls/config-xmls/generic/hybrid.xml
Normal file
108
misc/acrn-config/xmls/config-xmls/generic/hybrid.xml
Normal file
@ -0,0 +1,108 @@
|
||||
<acrn-config board="generic" scenario="hybrid">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">fc836901-8685-4bc0-8b71-6e31dc36fa47</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">Zephyr</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_ZEPHYR</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Zephyr_RawImage</kern_mod>
|
||||
<bootargs desc="Specify kernel boot arguments"></bootargs>
|
||||
<kern_load_addr desc="The loading address in host memory for the VM kernel">0x100000</kern_load_addr>
|
||||
<kern_entry_addr desc="The entry address in host memory for the VM kernel">0x100000</kern_entry_addr>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
116
misc/acrn-config/xmls/config-xmls/generic/industry.xml
Normal file
116
misc/acrn-config/xmls/config-xmls/generic/industry.xml
Normal file
@ -0,0 +1,116 @@
|
||||
<acrn-config board="generic" scenario="industry">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
@ -0,0 +1,95 @@
|
||||
<acrn-config board="generic" scenario="logical_partition">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">26c5e0d8-8f8a-47d8-8109-f201ebd61a5e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>2</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM0_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm0_pci_devs</pci_devs>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="vm_name">ACRN PRE-LAUNCHED VM1</name>
|
||||
<uuid configurable="0" desc="vm uuid">dd87ce08-66f9-473d-bc58-7605837f935e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_RT</guest_flag>
|
||||
<guest_flag>GUEST_FLAG_LAPIC_PASSTHROUGH</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>1</pcpu_id>
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x120000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM" readonly="true">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="kernel name">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel" readonly="true">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M
|
||||
consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM1_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm1_pci_devs</pci_devs>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
89
misc/acrn-config/xmls/config-xmls/generic/sdc.xml
Normal file
89
misc/acrn-config/xmls/config-xmls/generic/sdc.xml
Normal file
@ -0,0 +1,89 @@
|
||||
<acrn-config board="generic" scenario="sdc">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2" configurable="0" desc="specific for Kata">
|
||||
<load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
116
misc/acrn-config/xmls/config-xmls/generic/sdc2.xml
Normal file
116
misc/acrn-config/xmls/config-xmls/generic/sdc2.xml
Normal file
@ -0,0 +1,116 @@
|
||||
<acrn-config board="generic" scenario="sdc2">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
108
misc/acrn-config/xmls/config-xmls/nuc6cayh/hybrid.xml
Normal file
108
misc/acrn-config/xmls/config-xmls/nuc6cayh/hybrid.xml
Normal file
@ -0,0 +1,108 @@
|
||||
<acrn-config board="nuc6cayh" scenario="hybrid">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">fc836901-8685-4bc0-8b71-6e31dc36fa47</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">Zephyr</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_ZEPHYR</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Zephyr_RawImage</kern_mod>
|
||||
<bootargs desc="Specify kernel boot arguments"></bootargs>
|
||||
<kern_load_addr desc="The loading address in host memory for the VM kernel">0x100000</kern_load_addr>
|
||||
<kern_entry_addr desc="The entry address in host memory for the VM kernel">0x100000</kern_entry_addr>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
116
misc/acrn-config/xmls/config-xmls/nuc6cayh/industry.xml
Normal file
116
misc/acrn-config/xmls/config-xmls/nuc6cayh/industry.xml
Normal file
@ -0,0 +1,116 @@
|
||||
<acrn-config board="nuc6cayh" scenario="industry">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
@ -0,0 +1,95 @@
|
||||
<acrn-config board="nuc6cayh" scenario="logical_partition">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">26c5e0d8-8f8a-47d8-8109-f201ebd61a5e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>2</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM0_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm0_pci_devs</pci_devs>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="vm_name">ACRN PRE-LAUNCHED VM1</name>
|
||||
<uuid configurable="0" desc="vm uuid">dd87ce08-66f9-473d-bc58-7605837f935e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_RT</guest_flag>
|
||||
<guest_flag>GUEST_FLAG_LAPIC_PASSTHROUGH</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>1</pcpu_id>
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x120000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM" readonly="true">VM0_MEM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="kernel name">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel" readonly="true">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M
|
||||
consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM1_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm1_pci_devs</pci_devs>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
89
misc/acrn-config/xmls/config-xmls/nuc6cayh/sdc.xml
Normal file
89
misc/acrn-config/xmls/config-xmls/nuc6cayh/sdc.xml
Normal file
@ -0,0 +1,89 @@
|
||||
<acrn-config board="nuc6cayh" scenario="sdc">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2" configurable="0" desc="specific for Kata">
|
||||
<load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
116
misc/acrn-config/xmls/config-xmls/nuc6cayh/sdc2.xml
Normal file
116
misc/acrn-config/xmls/config-xmls/nuc6cayh/sdc2.xml
Normal file
@ -0,0 +1,116 @@
|
||||
<acrn-config board="nuc6cayh" scenario="sdc2">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
108
misc/acrn-config/xmls/config-xmls/nuc7i7dnb/hybrid.xml
Normal file
108
misc/acrn-config/xmls/config-xmls/nuc7i7dnb/hybrid.xml
Normal file
@ -0,0 +1,108 @@
|
||||
<acrn-config board="nuc7i7dnb" scenario="hybrid">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">fc836901-8685-4bc0-8b71-6e31dc36fa47</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">Zephyr</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_ZEPHYR</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Zephyr_RawImage</kern_mod>
|
||||
<bootargs desc="Specify kernel boot arguments"></bootargs>
|
||||
<kern_load_addr desc="The loading address in host memory for the VM kernel">0x100000</kern_load_addr>
|
||||
<kern_entry_addr desc="The entry address in host memory for the VM kernel">0x100000</kern_entry_addr>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
116
misc/acrn-config/xmls/config-xmls/nuc7i7dnb/industry.xml
Normal file
116
misc/acrn-config/xmls/config-xmls/nuc7i7dnb/industry.xml
Normal file
@ -0,0 +1,116 @@
|
||||
<acrn-config board="nuc7i7dnb" scenario="industry">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">SOS_COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">2</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
@ -0,0 +1,95 @@
|
||||
<acrn-config board="nuc7i7dnb" scenario="logical_partition">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN PRE-LAUNCHED VM0</name>
|
||||
<uuid configurable="0" desc="vm uuid">26c5e0d8-8f8a-47d8-8109-f201ebd61a5e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag></guest_flag>
|
||||
<guest_flag></guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>0</pcpu_id>
|
||||
<pcpu_id>2</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x100000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM">0x20000000</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM0_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm0_pci_devs</pci_devs>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">PRE_LAUNCHED_VM</load_order>
|
||||
<name desc="vm_name">ACRN PRE-LAUNCHED VM1</name>
|
||||
<uuid configurable="0" desc="vm uuid">dd87ce08-66f9-473d-bc58-7605837f935e</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_RT</guest_flag>
|
||||
<guest_flag>GUEST_FLAG_LAPIC_PASSTHROUGH</guest_flag>
|
||||
</guest_flags>
|
||||
<pcpu_ids desc="Assign physical CPU IDs to the VM" multiselect="true">
|
||||
<pcpu_id>1</pcpu_id>
|
||||
<pcpu_id>3</pcpu_id>
|
||||
</pcpu_ids>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<memory>
|
||||
<start_hpa desc="The start physical address in host for the VM">0x120000000</start_hpa>
|
||||
<size desc="The memory size in Bytes for the VM" readonly="true">VM0_MEM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ClearLinux</name>
|
||||
<kern_type desc="kernel name">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<console configurable="0" desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<rootfs desc="rootfs for Linux kernel" readonly="true">/dev/sda3</rootfs>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait noxsave nohpet console=hvc0 no_timer_check ignore_loglevel log_buf_len=16M
|
||||
consoleblank=0 tsc=reliable xapic_phys
|
||||
</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM2_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">VM1_CONFIG_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">vm1_pci_devs</pci_devs>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
89
misc/acrn-config/xmls/config-xmls/nuc7i7dnb/sdc.xml
Normal file
89
misc/acrn-config/xmls/config-xmls/nuc7i7dnb/sdc.xml
Normal file
@ -0,0 +1,89 @@
|
||||
<acrn-config board="nuc7i7dnb" scenario="sdc">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2" configurable="0" desc="specific for Kata">
|
||||
<load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
116
misc/acrn-config/xmls/config-xmls/nuc7i7dnb/sdc2.xml
Normal file
116
misc/acrn-config/xmls/config-xmls/nuc7i7dnb/sdc2.xml
Normal file
@ -0,0 +1,116 @@
|
||||
<acrn-config board="nuc7i7dnb" scenario="sdc2">
|
||||
<vm id="0">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order>
|
||||
<name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name>
|
||||
<uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<memory>
|
||||
<start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa>
|
||||
<size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size>
|
||||
</memory>
|
||||
<os_config>
|
||||
<name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name>
|
||||
<kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type>
|
||||
<kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod>
|
||||
<bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs>
|
||||
</os_config>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">SOS_COM1_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
<pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num>
|
||||
<pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs>
|
||||
<board_private>
|
||||
<rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs>
|
||||
<console desc="ttyS console for Linux kernel">/dev/ttyS0</console>
|
||||
<bootargs desc="Specify kernel boot arguments">
|
||||
rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3
|
||||
i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1
|
||||
hvlog=2M@0x1fe00000
|
||||
</bootargs>
|
||||
</board_private>
|
||||
</vm>
|
||||
<vm id="1">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="2">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">495ae2e5-2603-4d64-af76-d4bc5a8ec0e5</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
<vm id="3">
|
||||
<load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
|
||||
<uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
|
||||
<guest_flags desc="Select all applicable flags for the VM" multiselect="true">
|
||||
<guest_flag>0</guest_flag>
|
||||
</guest_flags>
|
||||
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
|
||||
<epc_section desc="epc section">
|
||||
<base desc="SGX EPC section base, must be page aligned">0</base>
|
||||
<size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
|
||||
</epc_section>
|
||||
<vuart id="0">
|
||||
<type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
|
||||
</vuart>
|
||||
<vuart id="1">
|
||||
<type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
|
||||
<base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
|
||||
<irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
|
||||
<target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
|
||||
<target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
|
||||
</vuart>
|
||||
</vm>
|
||||
</acrn-config>
|
||||
Loading…
Reference in New Issue
Block a user