diff --git a/misc/acrn-config/xmls/config-xmls/apl-mrb/industry.xml b/misc/acrn-config/xmls/config-xmls/apl-mrb/industry.xml
index ba0808369..9b09fce95 100644
--- a/misc/acrn-config/xmls/config-xmls/apl-mrb/industry.xml
+++ b/misc/acrn-config/xmls/config-xmls/apl-mrb/industry.xml
@@ -77,6 +77,7 @@
     </guest_flags>
     <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
         <pcpu_id>2</pcpu_id>
+        <pcpu_id>3</pcpu_id>
     </vcpu_affinity>
     <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
     <epc_section desc="epc section">
@@ -96,31 +97,4 @@
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </vuart>
   </vm>
-  <vm id="3">
-    <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
-    <uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
 </acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/apl-up2/industry.xml b/misc/acrn-config/xmls/config-xmls/apl-up2/industry.xml
index a1e9c9177..517a5390d 100644
--- a/misc/acrn-config/xmls/config-xmls/apl-up2/industry.xml
+++ b/misc/acrn-config/xmls/config-xmls/apl-up2/industry.xml
@@ -77,6 +77,7 @@
     </guest_flags>
     <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
         <pcpu_id>2</pcpu_id>
+        <pcpu_id>3</pcpu_id>
     </vcpu_affinity>
     <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
     <epc_section desc="epc section">
@@ -96,31 +97,4 @@
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </vuart>
   </vm>
-  <vm id="3">
-    <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
-    <uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
 </acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/generic/industry.xml b/misc/acrn-config/xmls/config-xmls/generic/industry.xml
index 06ff813b0..2bd862bb4 100644
--- a/misc/acrn-config/xmls/config-xmls/generic/industry.xml
+++ b/misc/acrn-config/xmls/config-xmls/generic/industry.xml
@@ -75,6 +75,7 @@
     </guest_flags>
     <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
         <pcpu_id>2</pcpu_id>
+        <pcpu_id>3</pcpu_id>
     </vcpu_affinity>
     <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
     <epc_section desc="epc section">
@@ -94,31 +95,4 @@
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </vuart>
   </vm>
-  <vm id="3">
-    <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
-    <uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
 </acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/generic/industry_launch_3uos.xml b/misc/acrn-config/xmls/config-xmls/generic/industry_launch_3uos.xml
deleted file mode 100644
index 0ab302b2e..000000000
--- a/misc/acrn-config/xmls/config-xmls/generic/industry_launch_3uos.xml
+++ /dev/null
@@ -1,86 +0,0 @@
-<acrn-config board="generic" scenario="industry" uos_launcher="3">
-    <uos id="1">
-	<uos_type desc="UOS type"></uos_type>
-	<rtos_type desc="UOS Realtime capability"></rtos_type>
-	<mem_size desc="UOS memory size in MByte"></mem_size>
-	<gvt_args desc="GVT argument for the vm"></gvt_args>
-	<vbootloader desc=""></vbootloader>
-	<rootfs_dev desc=""></rootfs_dev>
-	<rootfs_img desc=""></rootfs_img>
-	<console_type desc="UOS console type"></console_type>
-	<poweroff_channel desc="the method of power off uos">
-	</poweroff_channel>
-
-	<passthrough_devices>
-		<usb_xdci desc="vm usb_xdci device"></usb_xdci>
-		<audio desc="vm audio device"></audio>
-		<audio_codec desc="vm audio codec device"></audio_codec>
-		<ipu desc="vm ipu device"></ipu>
-		<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
-		<cse desc="vm cse device"></cse>
-		<wifi desc="vm wifi device"></wifi>
-		<bluetooth desc="vm bluetooth"></bluetooth>
-		<sd_card desc="vm sd card device"></sd_card>
-		<ethernet desc="vm ethernet device"></ethernet>
-		<sata desc="vm sata device"></sata>
-		<nvme desc="vm nvme device"></nvme>
-	</passthrough_devices>
-
-    </uos>
-    <uos id="2">
-	<uos_type desc="UOS type"></uos_type>
-	<rtos_type desc="UOS Realtime capability"></rtos_type>
-	<mem_size desc="UOS memory size in MByte"></mem_size>
-	<gvt_args desc="GVT argument for the vm"></gvt_args>
-	<vbootloader desc=""></vbootloader>
-	<rootfs_dev desc=""></rootfs_dev>
-	<rootfs_img desc=""></rootfs_img>
-	<console_type desc="UOS console type"></console_type>
-	<poweroff_channel desc="the method of power off uos">
-	</poweroff_channel>
-
-	<passthrough_devices>
-		<usb_xdci desc="vm usb_xdci device"></usb_xdci>
-		<audio desc="vm audio device"></audio>
-		<audio_codec desc="vm audio codec device"></audio_codec>
-		<ipu desc="vm ipu device"></ipu>
-		<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
-		<cse desc="vm cse device"></cse>
-		<wifi desc="vm wifi device"></wifi>
-		<bluetooth desc="vm bluetooth"></bluetooth>
-		<sd_card desc="vm sd card device"></sd_card>
-		<ethernet desc="vm ethernet device"></ethernet>
-		<sata desc="vm sata device"></sata>
-		<nvme desc="vm nvme device"></nvme>
-	</passthrough_devices>
-
-    </uos>
-    <uos id="3">
-	<uos_type desc="UOS type"></uos_type>
-	<rtos_type desc="UOS Realtime capability"></rtos_type>
-	<mem_size desc="UOS memory size in MByte"></mem_size>
-	<gvt_args desc="GVT argument for the vm"></gvt_args>
-	<vbootloader desc=""></vbootloader>
-	<rootfs_dev desc=""></rootfs_dev>
-	<rootfs_img desc=""></rootfs_img>
-	<console_type desc="UOS console type"></console_type>
-	<poweroff_channel desc="the method of power off uos">
-	</poweroff_channel>
-
-	<passthrough_devices>
-		<usb_xdci desc="vm usb_xdci device"></usb_xdci>
-		<audio desc="vm audio device"></audio>
-		<audio_codec desc="vm audio codec device"></audio_codec>
-		<ipu desc="vm ipu device"></ipu>
-		<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
-		<cse desc="vm cse device"></cse>
-		<wifi desc="vm wifi device"></wifi>
-		<bluetooth desc="vm bluetooth"></bluetooth>
-		<sd_card desc="vm sd card device"></sd_card>
-		<ethernet desc="vm ethernet device"></ethernet>
-		<sata desc="vm sata device"></sata>
-		<nvme desc="vm nvme device"></nvme>
-	</passthrough_devices>
-
-    </uos>
-</acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/nuc6cayh/industry.xml b/misc/acrn-config/xmls/config-xmls/nuc6cayh/industry.xml
index 0b7136e77..b01d3d474 100644
--- a/misc/acrn-config/xmls/config-xmls/nuc6cayh/industry.xml
+++ b/misc/acrn-config/xmls/config-xmls/nuc6cayh/industry.xml
@@ -76,6 +76,7 @@
     </guest_flags>
     <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
         <pcpu_id>2</pcpu_id>
+        <pcpu_id>3</pcpu_id>
     </vcpu_affinity>
     <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
     <epc_section desc="epc section">
@@ -95,31 +96,4 @@
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </vuart>
   </vm>
-  <vm id="3">
-    <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
-    <uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
 </acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/nuc6cayh/industry_launch_3uos.xml b/misc/acrn-config/xmls/config-xmls/nuc6cayh/industry_launch_3uos.xml
deleted file mode 100644
index 1989b6538..000000000
--- a/misc/acrn-config/xmls/config-xmls/nuc6cayh/industry_launch_3uos.xml
+++ /dev/null
@@ -1,81 +0,0 @@
-<acrn-config board="nuc6cayh" scenario="industry" uos_launcher="3">
-    <uos id="1">
-	<uos_type desc="UOS type">WINDOWS</uos_type>
-	<rtos_type desc="UOS Realtime capability">no</rtos_type>
-	<mem_size desc="UOS memory size in MByte">4096</mem_size>
-	<gvt_args desc="GVT argument for the vm">64 448 8</gvt_args>
-	<vbootloader desc="virtual bootloader method">ovmf</vbootloader>
-	<rootfs_dev desc="rootfs partition devices" readonly="true">/dev/sda3</rootfs_dev>
-	<rootfs_img desc="rootfs image" readonly="true">./win10-ltsc.img</rootfs_img>
-	<console_type desc="UOS console type">com1(ttyS0)</console_type>
-
-	<passthrough_devices>
-		<usb_xdci desc="vm usb_xdci device"></usb_xdci>
-		<audio desc="vm audio device">00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)</audio>
-		<audio_codec desc="vm audio codec device"></audio_codec>
-		<ipu desc="vm ipu device"></ipu>
-		<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
-		<cse desc="vm cse device"></cse>
-		<wifi desc="vm wifi device"></wifi>
-		<bluetooth desc="vm bluetooth"></bluetooth>
-		<sd_card desc="vm sd card device"></sd_card>
-		<ethernet desc="vm ethernet device"></ethernet>
-		<sata desc="vm sata device"></sata>
-		<nvme desc="vm nvme device"></nvme>
-	</passthrough_devices>
-
-    </uos>
-
-    <uos id="2">
-	<uos_type desc="UOS type">PREEMPT-RT LINUX</uos_type>
-	<rtos_type desc="UOS Realtime capability">Hard RT</rtos_type>
-	<mem_size desc="UOS memory size in MByte">1024</mem_size>
-	<gvt_args configurable="0" desc="GVT argument for the vm"></gvt_args>
-	<vbootloader desc="" readonly="true">ovmf</vbootloader>
-	<rootfs_dev configurable="0" desc=""></rootfs_dev>
-	<rootfs_img configurable="0" desc=""></rootfs_img>
-	<console_type desc="UOS console type">virtio-console(hvc0)</console_type>
-
-	<passthrough_devices>
-		<usb_xdci desc="vm usb_xdci device"></usb_xdci>
-		<audio desc="vm audio device"></audio>
-		<audio_codec desc="vm audio codec device"></audio_codec>
-		<ipu desc="vm ipu device"></ipu>
-		<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
-		<cse desc="vm cse device"></cse>
-		<wifi desc="vm wifi device"></wifi>
-		<bluetooth desc="vm bluetooth"></bluetooth>
-		<sd_card desc="vm sd card device"></sd_card>
-		<ethernet desc="vm ethernet device"></ethernet>
-		<sata desc="vm sata device"></sata>
-		<nvme desc="vm nvme device">02:00.0 Non-Volatile memory controller: Intel Corporation Device f1a6 (rev 03)</nvme>
-	</passthrough_devices>
-    </uos>
-
-    <uos id="3">
-	<uos_type desc="UOS type">VXWORKS</uos_type>
-	<rtos_type desc="UOS Realtime capability">Hard RT</rtos_type>
-	<mem_size desc="UOS memory size in MByte">2048</mem_size>
-	<gvt_args desc="GVT argument for the vm"></gvt_args>
-	<vbootloader desc="virtual boot loader method" readonly="true">ovmf</vbootloader>
-	<rootfs_dev desc="" readonly="true">/dev/sda3</rootfs_dev>
-	<rootfs_img desc="" readonly="true">./VxWorks.img</rootfs_img>
-	<console_type desc="UOS console type">virtio-console(hvc0)</console_type>
-
-	<passthrough_devices>
-		<usb_xdci desc="vm usb_xdci device"></usb_xdci>
-		<audio desc="vm audio device"></audio>
-		<audio_codec desc="vm audio codec device"></audio_codec>
-		<ipu desc="vm ipu device"></ipu>
-		<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
-		<cse desc="vm cse device"></cse>
-		<wifi desc="vm wifi device"></wifi>
-		<bluetooth desc="vm bluetooth"></bluetooth>
-		<sd_card desc="vm sd card device"></sd_card>
-		<ethernet desc="vm ethernet device"></ethernet>
-		<sata desc="vm sata device"></sata>
-		<nvme desc="vm nvme device"></nvme>
-	</passthrough_devices>
-
-    </uos>
-</acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/industry.xml b/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/industry.xml
index 7c15722fe..0b010df4d 100644
--- a/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/industry.xml
+++ b/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/industry.xml
@@ -76,6 +76,7 @@
     </guest_flags>
     <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
         <pcpu_id>2</pcpu_id>
+        <pcpu_id>3</pcpu_id>
     </vcpu_affinity>
     <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
     <epc_section desc="epc section">
@@ -95,31 +96,4 @@
         <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
     </vuart>
   </vm>
-  <vm id="3">
-    <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order>
-    <uuid configurable="0" desc="vm uuid">38158821-5208-4005-b72a-8a609e4190d0</uuid>
-    <guest_flags desc="Select all applicable flags for the VM" multiselect="true">
-        <guest_flag>0</guest_flag>
-    </guest_flags>
-    <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU.">
-        <pcpu_id>3</pcpu_id>
-    </vcpu_affinity>
-    <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos>
-    <epc_section desc="epc section">
-        <base desc="SGX EPC section base, must be page aligned">0</base>
-        <size desc="SGX EPC section size in Bytes, must be page aligned">0</size>
-    </epc_section>
-    <vuart id="0">
-        <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">COM1_BASE</base>
-        <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq>
-    </vuart>
-    <vuart id="1">
-        <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type>
-        <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base>
-        <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq>
-        <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id>
-        <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id>
-    </vuart>
-  </vm>
 </acrn-config>
diff --git a/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/industry_launch_3uos.xml b/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/industry_launch_3uos.xml
deleted file mode 100644
index 057944fd4..000000000
--- a/misc/acrn-config/xmls/config-xmls/nuc7i7dnb/industry_launch_3uos.xml
+++ /dev/null
@@ -1,81 +0,0 @@
-<acrn-config board="nuc7i7dnb" scenario="industry" uos_launcher="3">
-    <uos id="1">
-	<uos_type desc="UOS type">WINDOWS</uos_type>
-	<rtos_type desc="UOS Realtime capability">no</rtos_type>
-	<mem_size desc="UOS memory size in MByte">4096</mem_size>
-	<gvt_args desc="GVT argument for the vm">64 448 8</gvt_args>
-	<vbootloader desc="virtual bootloader method">ovmf</vbootloader>
-	<rootfs_dev desc="rootfs partition devices" readonly="true">/dev/sda3</rootfs_dev>
-	<rootfs_img desc="rootfs image" readonly="true">./win10-ltsc.img</rootfs_img>
-	<console_type desc="UOS console type">com1(ttyS0)</console_type>
-
-	<passthrough_devices>
-		<usb_xdci desc="vm usb_xdci device"></usb_xdci>
-		<audio desc="vm audio device">00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)</audio>
-		<audio_codec desc="vm audio codec device"></audio_codec>
-		<ipu desc="vm ipu device"></ipu>
-		<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
-		<cse desc="vm cse device"></cse>
-		<wifi desc="vm wifi device"></wifi>
-		<bluetooth desc="vm bluetooth"></bluetooth>
-		<sd_card desc="vm sd card device"></sd_card>
-		<ethernet desc="vm ethernet device"></ethernet>
-		<sata desc="vm sata device"></sata>
-		<nvme desc="vm nvme device"></nvme>
-	</passthrough_devices>
-
-    </uos>
-
-    <uos id="2">
-	<uos_type desc="UOS type">PREEMPT-RT LINUX</uos_type>
-	<rtos_type desc="UOS Realtime capability">Hard RT</rtos_type>
-	<mem_size desc="UOS memory size in MByte">1024</mem_size>
-	<gvt_args configurable="0" desc="GVT argument for the vm"></gvt_args>
-	<vbootloader desc="" readonly="true">ovmf</vbootloader>
-	<rootfs_dev configurable="0" desc=""></rootfs_dev>
-	<rootfs_img configurable="0" desc=""></rootfs_img>
-	<console_type desc="UOS console type">virtio-console(hvc0)</console_type>
-
-	<passthrough_devices>
-		<usb_xdci desc="vm usb_xdci device"></usb_xdci>
-		<audio desc="vm audio device"></audio>
-		<audio_codec desc="vm audio codec device"></audio_codec>
-		<ipu desc="vm ipu device"></ipu>
-		<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
-		<cse desc="vm cse device"></cse>
-		<wifi desc="vm wifi device"></wifi>
-		<bluetooth desc="vm bluetooth"></bluetooth>
-		<sd_card desc="vm sd card device"></sd_card>
-		<ethernet desc="vm ethernet device"></ethernet>
-		<sata desc="vm sata device"></sata>
-		<nvme desc="vm nvme device">02:00.0 Non-Volatile memory controller: Intel Corporation Device f1a6 (rev 03)</nvme>
-	</passthrough_devices>
-    </uos>
-
-    <uos id="3">
-	<uos_type desc="UOS type">VXWORKS</uos_type>
-	<rtos_type desc="UOS Realtime capability">Hard RT</rtos_type>
-	<mem_size desc="UOS memory size in MByte">2048</mem_size>
-	<gvt_args desc="GVT argument for the vm"></gvt_args>
-	<vbootloader desc="virtual boot loader method" readonly="true">ovmf</vbootloader>
-	<rootfs_dev desc="" readonly="true">/dev/sda3</rootfs_dev>
-	<rootfs_img desc="" readonly="true">./VxWorks.img</rootfs_img>
-	<console_type desc="UOS console type">virtio-console(hvc0)</console_type>
-
-	<passthrough_devices>
-		<usb_xdci desc="vm usb_xdci device"></usb_xdci>
-		<audio desc="vm audio device"></audio>
-		<audio_codec desc="vm audio codec device"></audio_codec>
-		<ipu desc="vm ipu device"></ipu>
-		<ipu_i2c desc="vm ipu_i2c device"></ipu_i2c>
-		<cse desc="vm cse device"></cse>
-		<wifi desc="vm wifi device"></wifi>
-		<bluetooth desc="vm bluetooth"></bluetooth>
-		<sd_card desc="vm sd card device"></sd_card>
-		<ethernet desc="vm ethernet device"></ethernet>
-		<sata desc="vm sata device"></sata>
-		<nvme desc="vm nvme device"></nvme>
-	</passthrough_devices>
-
-    </uos>
-</acrn-config>