diff --git a/misc/config_tools/schema/checks/rdt_support.xsd b/misc/config_tools/schema/checks/rdt_support.xsd
new file mode 100644
index 000000000..fb073e7ab
--- /dev/null
+++ b/misc/config_tools/schema/checks/rdt_support.xsd
@@ -0,0 +1,86 @@
+<?xml version="1.0"?>
+<xs:schema xml:id="root"
+	   xmlns:xs="http://www.w3.org/2001/XMLSchema"
+	   xmlns:acrn="https://projectacrn.org">
+
+  <xs:assert test="if (//VCAT_ENABLED = 'y')
+                   then (//CDP_ENABLED = 'n' and //RDT_ENABLED = 'y')
+                   else true()">
+    <xs:annotation>
+      <xs:documentation>vCAT can be enabled only when RDT_ENABLED is 'y' and CDP_ENABLED is 'n'</xs:documentation>
+    </xs:annotation>
+  </xs:assert>
+
+  <xs:assert test="if (count(//virtual_cat_support[text() = 'y']) > 0)
+                   then //RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y'
+                   else true()">
+    <xs:annotation>
+      <xs:documentation>Per VM virtual_cat_support can be set only when RDT_ENABLED is 'y' and VCAT_ENABLED is 'y'.</xs:documentation>
+    </xs:annotation>
+  </xs:assert>
+
+  <xs:assert test="every $vm in vm satisfies
+                  (
+                    if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y' and $vm/virtual_cat_support[text() = 'y'])
+                    then count($vm/clos/vcpu_clos) > 1
+                    else true()
+                  )
+                  ">
+    <xs:annotation>
+      <xs:documentation>For a vCAT VM, number of clos/vcpu_clos elements must be greater than 1!</xs:documentation>
+    </xs:annotation>
+  </xs:assert>
+
+  <xs:assert test="if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y')
+                   then count(vm[virtual_cat_support[text() = 'y'] and count(clos/vcpu_clos[. = 0])]) = 0
+                   else true()">
+    <xs:annotation>
+      <xs:documentation>For a vCAT VM, vcpu_clos cannot be set to CLOSID 0, CLOSID 0 is reserved to be used by hypervisor</xs:documentation>
+    </xs:annotation>
+  </xs:assert>
+
+  <xs:assert test="every $vm in vm satisfies
+                  (
+                    if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y' and $vm/virtual_cat_support[text() = 'y'])
+                    then count($vm[clos/vcpu_clos[. &gt;= count($vm/..//CLOS_MASK)]]) = 0
+                    else true()
+                  )
+                  ">
+    <xs:annotation>
+      <xs:documentation>For a vCAT VM, each clos/vcpu_clos must be less than L2/L3 COS_MAX!</xs:documentation>
+    </xs:annotation>
+  </xs:assert>
+
+  <xs:assert test="every $vm in vm satisfies
+                  (
+                    if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y' and $vm/virtual_cat_support[text() = 'y'])
+                    then count($vm/clos/vcpu_clos) = count(distinct-values($vm/clos/vcpu_clos))
+                    else true()
+                  )
+                  ">
+    <xs:annotation>
+      <xs:documentation>For a vCAT VM, its clos/vcpu_clos elements cannot contain duplicate values</xs:documentation>
+    </xs:annotation>
+  </xs:assert>
+
+  <xs:assert test="every $vm1 in vm, $vm2 in $vm1/following-sibling::vm satisfies
+                  (
+                    if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y' and ($vm1/virtual_cat_support[text() = 'y'] or $vm2/virtual_cat_support[text() = 'y']))
+                    then count($vm1/clos/vcpu_clos[. = $vm2/clos/vcpu_clos]) = 0
+                    else true()
+                  )
+                  ">
+    <xs:annotation>
+      <xs:documentation>if RDT_ENABLED is 'y', there should not be any CLOS IDs overlap between a vCAT VM and any other VMs</xs:documentation>
+    </xs:annotation>
+  </xs:assert>
+
+  <xs:assert test="every $vm in //vm satisfies $vm//load_order != 'SERVICE_VM' or count($vm//lapic_passthrough[text() = 'y']) = 0 or count(//nested_virtualization_support[text() = 'y']) > 0">
+    <xs:annotation>
+      <xs:documentation>Service VM cannot use LAPIC passthrough unless GUEST_FLAG_NVMX_ENABLED is set.</xs:documentation>
+    </xs:annotation>
+  </xs:assert>
+
+  <xs:assert test="not (//hv//RDT/RDT_ENABLED = 'y' and //hv//SSRAM/SSRAM_ENABLED = 'y')"/>
+
+</xs:schema>
diff --git a/misc/config_tools/schema/config.xsd b/misc/config_tools/schema/config.xsd
index 4bf20ad6c..06f4c7f12 100644
--- a/misc/config_tools/schema/config.xsd
+++ b/misc/config_tools/schema/config.xsd
@@ -153,7 +153,6 @@ Machine Check Error on Page Size Change.</xs:documentation>
       </xs:annotation>
     </xs:element>
   </xs:all>
-  <xs:assert test="not (RDT/RDT_ENABLED = 'y' and SSRAM/SSRAM_ENABLED = 'y')"/>
 </xs:complexType>
 
 <xs:complexType name="MemoryOptionsType">
@@ -440,12 +439,6 @@ its ``id`` attribute.</xs:documentation>
     </xs:element>
   </xs:all>
   <xs:attribute name="id" type="xs:integer" />
-
-  <xs:assert test="load_order != 'SERVICE_VM' or count(//lapic_passthrough[text() = 'y']) = 0 or count(//nested_virtualization_support[text() = 'y']) > 0">
-    <xs:annotation>
-      <xs:documentation>Service VM cannot use LAPIC passthrough unless nested_virtualization_support is set.</xs:documentation>
-    </xs:annotation>
-  </xs:assert>
 </xs:complexType>
 
 <xs:complexType name="ACRNConfigType">
@@ -469,79 +462,6 @@ to launch post-launched User VMs.</xs:documentation>
   </xs:all>
   <xs:attribute name="board" type="xs:string" use="required" />
   <xs:attribute name="scenario" type="xs:string" use="required" />
-
-  <xs:assert test="if (//VCAT_ENABLED = 'y')
-                   then (//CDP_ENABLED = 'n' and //RDT_ENABLED = 'y')
-                   else true()">
-    <xs:annotation>
-      <xs:documentation>vCAT can be enabled only when RDT_ENABLED is 'y' and CDP_ENABLED is 'n'</xs:documentation>
-    </xs:annotation>
-  </xs:assert>
-
-  <xs:assert test="if (count(//virtual_cat_support[text() = 'y']) > 0)
-                   then //RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y'
-                   else true()">
-    <xs:annotation>
-      <xs:documentation>Per VM virtual_cat_support can be set only when RDT_ENABLED is 'y' and VCAT_ENABLED is 'y'.</xs:documentation>
-    </xs:annotation>
-  </xs:assert>
-
-  <xs:assert test="every $vm in vm satisfies
-                  (
-                    if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y' and $vm/virtual_cat_support[text() = 'y'])
-                    then count($vm/clos/vcpu_clos) > 1
-                    else true()
-                  )
-                  ">
-    <xs:annotation>
-      <xs:documentation>For a vCAT VM, number of clos/vcpu_clos elements must be greater than 1!</xs:documentation>
-    </xs:annotation>
-  </xs:assert>
-
-  <xs:assert test="if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y')
-                   then count(vm[virtual_cat_support[text() = 'y'] and count(clos/vcpu_clos[. = 0])]) = 0
-                   else true()">
-    <xs:annotation>
-      <xs:documentation>For a vCAT VM, vcpu_clos cannot be set to CLOSID 0, CLOSID 0 is reserved to be used by hypervisor</xs:documentation>
-    </xs:annotation>
-  </xs:assert>
-
-  <xs:assert test="every $vm in vm satisfies
-                  (
-                    if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y' and $vm/virtual_cat_support[text() = 'y'])
-                    then count($vm[clos/vcpu_clos[. &gt;= count($vm/..//CLOS_MASK)]]) = 0
-                    else true()
-                  )
-                  ">
-    <xs:annotation>
-      <xs:documentation>For a vCAT VM, each clos/vcpu_clos must be less than L2/L3 COS_MAX!</xs:documentation>
-    </xs:annotation>
-  </xs:assert>
-
-  <xs:assert test="every $vm in vm satisfies
-                  (
-                    if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y' and $vm/virtual_cat_support[text() = 'y'])
-                    then count($vm/clos/vcpu_clos) = count(distinct-values($vm/clos/vcpu_clos))
-                    else true()
-                  )
-                  ">
-    <xs:annotation>
-      <xs:documentation>For a vCAT VM, its clos/vcpu_clos elements cannot contain duplicate values</xs:documentation>
-    </xs:annotation>
-  </xs:assert>
-
-  <xs:assert test="every $vm1 in vm, $vm2 in $vm1/following-sibling::vm satisfies
-                  (
-                    if (//RDT_ENABLED = 'y' and //VCAT_ENABLED = 'y' and ($vm1/virtual_cat_support[text() = 'y'] or $vm2/virtual_cat_support[text() = 'y']))
-                    then count($vm1/clos/vcpu_clos[. = $vm2/clos/vcpu_clos]) = 0
-                    else true()
-                  )
-                  ">
-    <xs:annotation>
-      <xs:documentation>if RDT_ENABLED is 'y', there should not be any CLOS IDs overlap between a vCAT VM and any other VMs</xs:documentation>
-    </xs:annotation>
-  </xs:assert>
-
 </xs:complexType>
 
 <xs:element name="acrn-config" type="ACRNConfigType">