diff --git a/doc/static/downloads/skl-patches-for-acrn.tar b/doc/static/downloads/skl-patches-for-acrn.tar
new file mode 100644
index 000000000..fdcf64618
Binary files /dev/null and b/doc/static/downloads/skl-patches-for-acrn.tar differ
diff --git a/doc/tutorials/skl-nuc.rst b/doc/tutorials/skl-nuc.rst
new file mode 100644
index 000000000..92fcc9fb8
--- /dev/null
+++ b/doc/tutorials/skl-nuc.rst
@@ -0,0 +1,122 @@
+.. _skl-nuc-gpu-passthrough:
+
+GPU Passthrough on Skylake NUC
+##############################
+
+.. warning::
+   This community reference release for the Skylake NUC with GPU
+   passthrough is a one-time snapshot release and is not supported
+   or maintained.
+
+Hardware platform
+*****************
+
+* `Skylake Skull Canyon NUC NUC6i7KYK
+  <https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc6i7kyk.html>`_
+
+Software Configuration
+**********************
+
+* `acrn-hypervisor tag acrn-2018w39.6-140000p
+  <https://github.com/projectacrn/acrn-hypervisor/releases/tag/acrn-2018w39.6-140000p>`_
+* `acrn-kernel tag acrn-2018w39.6-140000p
+  <https://github.com/projectacrn/acrn-kernel/releases/tag/acrn-2018w39.6-140000p>`_
+* Clear Linux:       version: 25130 (UOS and SOS use this version)
+
+Source code patches are provided in `skl-patches-for-acrn.tar file
+<../_static/downloads/skl-patches-for-acrn.tar>`_ to work around or add support for
+enabling GPU passthrough:
+
+* 0001-hv-workaround-for-system-hang-on-non-apicv-devices.patch
+* 0002-hv-More-changes-to-enable-GPU-passthru.patch
+* 0003-dm-increase-interrupt-storm-threshold-for-gpu-passth.patch
+* 0004-dm-passthrough-opregion-to-uos-gpu.patch
+* 0005-dm-modify-launch-script-to-support-gpu-passthrough.patch
+
+Software Setup
+**************
+
+Please follow the :ref:`getting-started-apl-nuc`, with the following changes:
+
+1. Set up a Clear Linux Operating System
+
+   Clear Linux will update to the latest version during installation.
+   Run this command (as root) to roll back to version 25130, using the
+   ``–x`` switch to ignore version mismatch::
+
+      # swupd verify -x --fix --picky -m 25130
+      # swupd autoupdate -–disable
+      # reboot
+
+#. Add the ACRN hypervisor to the EFI Partition
+
+   Refer to :ref:`getting-started-building`
+   to build the  hypervisor, device model, and tools.
+
+   Download and untar this `skl-patches-for-acrn.tar file
+   <../_static/downloads/skl-patches-for-acrn.tar>`_, apply these patches to the
+   acrn-hypervisor, and build it::
+
+      $ git clone https://github.com/projectacrn/acrn-hypervisor
+      $ cd acrn-hypervisor
+      $ git checkout acrn-2018w39.6-140000p
+      $ tar xf ~/Downloads/skl-patches-for-acrn.tar
+      $ git am *.patch
+      $ make
+
+   This build process creates new ``acrn-dm``, ``acrn.efi`` and
+   ``launch_uos.sh`` files.
+
+#. Replace ``acrn-dm`` with this new version (as root)::
+
+      # cp build/devicemodel/acrn-dm  /usr/bin/acrn-dm
+
+#. Put the new ``acrn.efi`` hypervisor application (included in the
+   Clear Linux release) on the EFI partition (as root)::
+
+      # mount /dev/nvme0n1p1 /mnt
+      # mkdir /mnt/EFI/acrn
+      # cp build/hypervisor/acrn.efi /mnt/EFI/acrn/
+
+#. Configure the EFI firmware to boot the ACRN hypervisor by default.
+   This assumes you are on an NVMe SSD as in the Skull Canyon::
+
+      # efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/nvme0n1 -p 1 -L "ACRN"
+
+#. Create a boot entry for ACRN Service OS by making a few edits to the
+   ``acrn.conf`` file (note the options line must be one long line, without
+   any line breaks)::
+
+      # vim /mnt/loader/entries/acrn.conf
+      title The ACRN Service OS
+      linux   /EFI/org.clearlinux/kernel-org.clearlinux.pk414-sos.4.14.68-99
+      options pci_devices_ignore=(0:18:1) console=tty0 console=ttyS2 i915.nuclear_pageflip=1 root=/dev/nvme0n1p3 rw rootwait ignore_loglevel no_timer_check consoleblank=0 i915.tsd_init=7 i915.tsd_delay=2000 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_guc_loading=0 i915.enable_guc_submission=0 i915.enable_preemption=1 i915.context_priority_mode=2 i915.enable_gvt=1 i915.enable_initial_modeset=0 i915.enable_guc=0 hvlog=2M@0x1FE00000
+
+#. Don't Enable weston service (skip this step found in the NUC's getting
+   started guide).
+
+#. Set up Reference UOS by running the modified ``launch_uos.sh`` in
+   ``acrn-hypervisor/devicemodel/samples/nuc/launch_uos.sh``
+
+#. After UOS is launched, do these steps to run GFX workloads:
+
+   a) install weston and glmark2::
+
+         #swupd bundle-add desktop glmark2
+   #) Add new user cl_uos::
+
+         # useradd cl_uos
+         # passwd cl_uos
+         # usermod -G wheel -a cl_uos
+   #) Enable weston service::
+
+         # systemctl enable weston@cl_uos
+         # systemctl start weston@cl_uos
+   #) Disable weston screen saver::
+
+         # vim .config/weston.ini
+         [core]
+         idle-time=0
+   #) run glmark2::
+
+         # glmark2-es2-wayland