board_inspector: parse SR-IOV capability structure properly

This patch adds the logic needed to fully parse an SR-IOV extended
capability structure. Such information will later be used to extract all
information about physical and virtual functions.

Tracked-On: #7301
Signed-off-by: Junjie Mao <junjie.mao@intel.com>

misc/config_tools/board_inspector/pcieparser/extcaps.py

@@ -6,6 +6,9 @@
 import ctypes
 import copy
 import inspectorlib.cdata as cdata
+from .header import MemoryBar32, MemoryBar64, IOBar, \
+    PCIE_BAR_SPACE_MASK, PCIE_BAR_MEMORY_SPACE, PCIE_BAR_IO_SPACE, \
+    PCIE_BAR_TYPE_MASK, PCIE_BAR_TYPE_32_BIT, PCIE_BAR_TYPE_64_BIT
 
 class ExtendedCapability:
     # Capability names from PCI Express Base Specification, mostly Table 9-23
@@ -62,6 +65,11 @@ class ExtendedCapability:
         else:
             return f"Reserved Extended ({hex(self.id)})"
 
+    @property
+    def next_cap_ptr(self):
+        # Classes inherit ExtendedCapability must implement the attribute next_cap_ptr_raw
+        return self.next_cap_ptr_raw & 0xffc
+
 class ExtendedCapabilityListRegister(cdata.Struct, ExtendedCapability):
     _pack_ = 1
     _fields_ = [
@@ -70,12 +78,90 @@ class ExtendedCapabilityListRegister(cdata.Struct, ExtendedCapability):
         ('next_cap_ptr_raw', ctypes.c_uint32, 12),
     ]
 
-    @property
+# SR-IOV (0x10)
-    def next_cap_ptr(self):
+
-        return self.next_cap_ptr_raw & 0xffc
+class SRIOVBase(cdata.Struct, ExtendedCapability):
+    _pack_ = 1
+    _fields_ = copy.copy(ExtendedCapabilityListRegister._fields_) + [
+        # SR-IOV Capabilities Register
+        ('vf_migration_capable', ctypes.c_uint32, 1),
+        ('ari_capable_hierarchy_preserved', ctypes.c_uint32, 1),
+        ('vf_10_bit_tag_requester_supported', ctypes.c_uint32, 1),
+        ('reserved1', ctypes.c_uint32, 18),
+        ('vf_migration_interrupt_message_number', ctypes.c_uint32, 11),
+
+        # SR-IOV Control Register
+        ('vf_enable', ctypes.c_uint32, 1),
+        ('vf_migration_enable', ctypes.c_uint32, 1),
+        ('vf_migration_interrupt_enable', ctypes.c_uint32, 1),
+        ('vf_mse', ctypes.c_uint32, 1),
+        ('ari_capable_hierarchy', ctypes.c_uint32, 1),
+        ('vf_10_bit_tag_requester_enable', ctypes.c_uint32, 1),
+        ('reserved2', ctypes.c_uint32, 10),
+
+        # SR-IOV Status Register
+        ('vf_migration_status', ctypes.c_uint32, 1),
+        ('reserved3', ctypes.c_uint32, 15),
+
+        ('initial_vfs', ctypes.c_uint16),
+        ('total_vfs', ctypes.c_uint16),
+        ('num_vfs', ctypes.c_uint16),
+        ('function_dependency_link', ctypes.c_uint8),
+        ('reserved4', ctypes.c_uint8),
+        ('first_vf_offset', ctypes.c_uint16),
+        ('vf_stride', ctypes.c_uint16),
+        ('reserved5', ctypes.c_uint16),
+        ('vf_device_id', ctypes.c_uint16),
+
+        ('supported_page_sizes', ctypes.c_uint32),
+        ('system_page_size', ctypes.c_uint32),
+    ]
+
+def SRIOV_factory(addr):
+    vf_bars_list = list()
+    bar_base = addr + ctypes.sizeof(SRIOVBase)
+    bar_addr = bar_base
+    bar_end = bar_base + 0x18
+    while bar_addr < bar_end:
+        bar = ctypes.c_uint32.from_address(bar_addr).value
+        idx = int((bar_addr - bar_base) / 4)
+        if (bar & PCIE_BAR_SPACE_MASK) == PCIE_BAR_MEMORY_SPACE:
+            if (bar & PCIE_BAR_TYPE_MASK) == PCIE_BAR_TYPE_64_BIT:
+                vf_bars_list.append((f"vf_bar{idx}", MemoryBar64))
+                bar_addr += 0x8
+            else:
+                vf_bars_list.append((f"vf_bar{idx}", MemoryBar32))
+                bar_addr += 0x4
+        else:
+            vf_bars_list.append((f"vf_bar{idx}", IOBar))
+            bar_addr += 0x4
+
+    class SRIOV(cdata.Struct, ExtendedCapability):
+        class VFBars(cdata.Struct):
+            _pack_ = 1
+            _fields_ = vf_bars_list
+
+            def __iter__(self):
+                for f in self._fields_:
+                    yield getattr(self, f[0])
+
+        _pack_ = 1
+        _fields_ = copy.copy(SRIOVBase._fields_) + [
+            ('vf_bars', VFBars),
+            ('vf_migration_state_array_offset', ctypes.c_uint32),
+        ]
+
+    return SRIOV
+
+def parse_sriov(buf, cap_ptr):
+    return SRIOV_factory(ctypes.addressof(buf) + cap_ptr).from_buffer_copy(buf, cap_ptr)
 
 # Module API
 
+capability_parsers = {
+    0x10: parse_sriov,
+}
+
 def extended_capabilities(data):
     buf = ctypes.create_string_buffer(data, len(data))
     cap_ptr = 0x100
@@ -83,7 +169,9 @@ def extended_capabilities(data):
     acc = list()
     while cap_ptr != 0:
         caplist = ExtendedCapabilityListRegister.from_buffer_copy(buf, cap_ptr)
-        if caplist.id != 0:
+        if caplist.id in capability_parsers.keys():
+            acc.append(capability_parsers[caplist.id](buf, cap_ptr))
+        elif caplist.id != 0:
             acc.append(caplist)
         cap_ptr = caplist.next_cap_ptr