hv: code style fix for partition mode specific code

There are still some misra-c violations when CONFIG_PARTITION_MODE is defined.

arch/x86/configs:
- remove the unused macro: PRE_LAUNCH_VM_NUM
- pt_dev.c: VMx_CONFIG_PCI_PTDEV_NUM has been defined in partition_config.h,
  should not hard code them again in pt_dev.c.
- ve820.c: use "UL" suffix instead of "U" for 64 bits variables.

vmid is uint16_t in ACRN, so vuart_vmid should be uint16_t as well.

Fix another few other miscellaneous misra-c violations.

Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>

hypervisor/arch/x86/configs/apl-mrb/ve820.c

@@ -8,32 +8,32 @@
 
 const struct e820_entry ve820_entry[E820_MAX_ENTRIES] = {
 	{	/* 0 to mptable */
-		.baseaddr =  0x0U,
-		.length   =  0xEFFFFU,
-		.type     =  E820_TYPE_RAM
+		.baseaddr = 0x0UL,
+		.length   = 0xEFFFFUL,
+		.type     = E820_TYPE_RAM
 	},
 
 	{	/* mptable 65536U */
-		.baseaddr =  0xF0000U,
-		.length   =  0x10000U,
-		.type     =  E820_TYPE_RESERVED
+		.baseaddr = 0xF0000UL,
+		.length   = 0x10000UL,
+		.type     = E820_TYPE_RESERVED
 	},
 
 	{	/* mptable to lowmem */
-		.baseaddr =  0x100000U,
-		.length   =  0x1FF00000U,
-		.type     =  E820_TYPE_RAM
+		.baseaddr = 0x100000UL,
+		.length   = 0x1FF00000UL,
+		.type     = E820_TYPE_RAM
 	},
 
 	{	/* lowmem to PCI hole */
-		.baseaddr =  0x20000000U,
-		.length   =  0xa0000000U,
-		.type     =  E820_TYPE_RESERVED
+		.baseaddr = 0x20000000UL,
+		.length   = 0xa0000000UL,
+		.type     = E820_TYPE_RESERVED
 	},
 
 	{	/* PCI hole to 4G */
-		.baseaddr =  0xe0000000U,
-		.length   =  0x20000000U,
-		.type     =  E820_TYPE_RESERVED
+		.baseaddr = 0xe0000000UL,
+		.length   = 0x20000000UL,
+		.type     = E820_TYPE_RESERVED
 	},
 };