doc: Stop using kconfig to make a customized efi.

Also fix some quick setup script issues.

Signed-off-by: lirui34 <ruix.li@intel.com>

doc/faq.rst

@@ -49,46 +49,32 @@ For example, if the NUC's physical memory size is 32G, you may follow these step
 to make the new uefi ACRN hypervisor, and then deploy it onto the NUC board to boot
 ACRN Service VM with the 32G memory size.
 
-#. Modify the ``hypervisor/arch/x86/Kconfig`` from the ACRN source on host machine.
+#. Use ``make menuconfig`` to change the ``RAM_SIZE``::
 
-   ::
+   $ cd acrn-hypervisor
+   $ make menuconfig -C hypervisor BOARD=nuc7i7dnb
 
-      config HV_RAM_SIZE
+#. Navigate to these items and then change the value as given below::
-              hex "Size of the RAM region used by the hypervisor"
-      -       default 0x0b800000
-      +       default 0x0f000000
-              help
-                A 64-bit integer indicating the size of RAM used by the hypervisor.
-                It is ensured at link time that the footprint of the hypervisor
 
-   ::
+   (0x0f000000) Size of the RAM region used by the hypervisor
+   (0x800000000) Size of the physical platform RAM
+   (0x800000000) Size of the Service OS (SOS) RAM
 
-      config PLATFORM_RAM_SIZE
+#. Press :kbd:`S` and then :kbd:`Enter` to save the ``.config`` to the default directory:
-              hex "Size of the physical platform RAM"
+   ``acrn-hypervisor/hypervisor/build/.config``
-      -       default 0x400000000
-      +       default 0x800000000
-              help
-                A 64-bit integer indicating the size of the physical platform RAM
-                (MMIO not included).
 
-   ::
+#. Press :kbd:`ESC` to leave the menu.
 
-      config SOS_RAM_SIZE
+#. Use these command lines to build the new efi image for KBL NUC::
-              hex "Size of the Service OS (SOS) RAM"
-      -       default 0x400000000
-      +       default 0x800000000
-              help
-                A 64-bit integer indicating the size of the Service OS RAM (MMIO not
-                included).
 
-#. Use ``make BOARD=nuc7i7dnb FIRMWARE=uefi hypervisor`` command to build the new
+   $ make -C hypervisor
-   efi image for KBL NUC.
+   $ make -C misc/efi-stub HV_OBJDIR=$PWD/hypervisor/build EFI_OBJDIR=$PWD/hypervisor/build
 
 #. Log in to your KBL NUC (assumes all the ACRN configurations are set up), then copy
    the new efi image into the EFI partition::
 
    # mount /dev/sda1 /mnt
-   # scp -r <host machine IP>:<ACRN source>/build/hypervisor/acrn.efi /mnt/EFI/acrn/
+   # scp -r <host name>@<host address>:<your workspace>/acrn-hypervisor/hypervisor/build/acrn.efi /mnt/EFI/acrn/
    # sync && umount /mnt
 
 #. Reboot KBL NUC to enjoy the ACRN with 32G memory.

doc/getting-started/acrn_quick_setup.sh

@@ -41,6 +41,8 @@ source /etc/os-release
 skip_download_uos=0
 # switcher for disabling the reboot device
 disable_reboot=0
+# set default scenario name
+scenario=sdc
 
 function upgrade_sos()
 {
@@ -51,12 +53,10 @@ function upgrade_sos()
     echo "Upgrading Service VM..."
 
     # get board name
-    BOARD_NAME=`cat /sys/devices/virtual/dmi/id/board_name`
+    BOARD_NAME=`cat /sys/devices/virtual/dmi/id/board_name | cut -d' ' -f1`
     BOARD_NAME=${BOARD_NAME,,}
     [[ -z $BOARD_NAME ]] && echo "Unknown board name." && exit 1
     echo "Board name is: $BOARD_NAME"
-    # set default scenario name
-    scenario=sdc
  
     # set up mirror and proxy url while specified with m and p options
     [[ -n $mirror ]] && echo "Setting swupd mirror to: $mirror" && swupd mirror -s $mirror
@@ -103,7 +103,7 @@ function upgrade_sos()
             umount /mnt && sync
             exit 1
         fi
-        cp -a $acrn_efi_path /mnt/EFI/acrn/acrn.efi
+        cp -r $acrn_efi_path /mnt/EFI/acrn/acrn.efi
         if [[ $? -ne 0 ]]; then echo "Failed to copy $acrn_efi_path" && exit 1; fi
 
         new_kernel=`ls /usr/lib/kernel/org*sos* -tl | head -n1 | awk -F'/' '{print $5}'`

doc/getting-started/rt_industry.rst

@@ -99,10 +99,8 @@ Hardware Setup
    +----------------------+-------------------+----------------------+-----------------------------------------------------------+
 
 .. [1] The maximum supported memory size for ACRN is 16GB. If you are using
-   32GB memory, follow the :ref:`config_32GB_memory` instruction to modify the 
+   32GB memory, follow the :ref:`config_32GB_memory` instruction to make the customized ACRN hypervisor
-   ``hypervisor/arch/x86/Kconfig`` and then use ``make FIRMWARE=uefi BOARD=nuc7i7dnb 
+   which is supported 32GB memory. For more detailed information about how to build ACRN
-   SCENARIO=industry hypervisor`` command to make the latest ACRN hypervisor
-   which is supported 32GB memory. For more detailed instruction about how to build ACRN 
    from the source code, refer to this :ref:`guide <getting-started-building>`.
 
 Set up the ACRN Hypervisor for industry scenario