Some projects based on ACRN don't want tap name to contain "acrn_"
prefix. This patch removes that prefix.
Tracked-On: #2509
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
GPIO set/get value can be operated by accessing PIO space and the PIO
register definition for GPIO is in gpio_dm.h, frontend driver or ACPI
control methods can operate GPIO based on it.
GPIO mediator also defines ACPI control methods to support GPIO
operations, GPIO consumers can invoke PIO_GPIO_SET_VALUE/PIO_GPIO_GET_VALUE
in their own DSDT to set/get one GPIO value via ACPI control method.
v2: 1) Fix code style.
2) Use virtio configuration space callbacks to implement GPIO PIO operations
that replace pci_gpio_read/pci_gpio_write with virtio_cfgread/virtio_cfgwrite.
3) Return 0xFFFFFFFF as invalid result of PIO reading instead 0.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Users of pthread_cond_wait() should take care of spurious wakeups and it
is usually used in conjunction with a predicate. Not doing so can result
in unintended behavior. For example:
virtio_net_tx_thread():
entry -> pthread_cond_wait() -> spurious wakeup ->
vq_clear_used_ring_flags() -> segfault (vq->used uninitialized)
tpm_crb_request_deliver():
entry -> pthread_cond_wait() -> spurious wakeup ->
swtpm_handle_request() called needlessly
virtio_rnd_get_entropy():
entry -> pthread_cond_wait() -> spurious wakeup ->
no avail ring processing ->
virtio_rnd_notify() skips pthread_cond_signal() due to
rnd->in_progress ->
vq_endchains() called needlessly ->
wait in pthread_cond_wait() indefinitely
Fix these uses of pthread_cond_wait() by using predicates.
The only use case without a clear predicate is the tx thread in
virtio-mei, because it works with two-dimensional linked lists.
v1 -> v2:
- fix bugs and comments
- reduce code redundancy
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
- explicitly initialize the connections list
- use a do-while loop for vmei_proc_tx() since the first call must
always succeed
- make sure active_clients is initialized before creating the tx thread
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Remove the uses of LIST_FIRST() and LIST_NEXT() plus an extra pointer.
Also, call LIST_INIT() in vmei_me_client_destroy_host_clients() before
releasing the mutex.
v1 -> v2:
- split the cleanup commit into two parts
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use pthread_cond_broadcast() while holding the mutex to guarantee the
signaling of its condition variable.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
virtio-blk never sets used_all_avail when calling vq_endchains(), which
may become problematic if VIRTIO_F_NOTIFY_ON_EMPTY is enabled.
Provide vq_endchains() with that info to ensure the delivery of an
interrupt when the avail ring is drained in the case of
VIRTIO_F_NOTIFY_ON_EMPTY.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Make sure VQ_ALLOC is visible only after vq is completely initialized.
This ensures vq_ring_ready() is reliable when it returns true.
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
print each IRQ descriptor interrupts number and all of IRQ descriptors
interrupts when UOS requests or releases a GPIO IRQ.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support reading GPIO value when the GPIO switches to IRQ mode.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
GPIO IRQ controller emulation is used to handle level trigger and
edge trigger interrupts. Use GPIO IRQ virtqueue to handle IRQ chip
operations and GPIO event virtqueue to indicate IRQ source to UOS.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add the GPIO IRQ definitions, and implement the GPIO IRQ
initialization and deinitialization.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are two virtqueues for irq, one for handling the operations of
front-end irq controller and the other for triggering the interrupt.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Without memory barrier, the change of used ring index could not
immediately detected by FE, this would bring some problems.
For virtio-blk FE driver, when it receives an interrupt, and confirms the
used ring index has changed, it will first set ring flags with
VRING_AVAIL_F_NO_INTERRUPT, then get buffer from virtqueue, after
process this request, it will mask VRING_AVAIL_F_NO_INTERRUPT, and get
used ring index again before return. If used ring changes, it will
process it. At the same time, BE will read this flags before each notify,
if VRING_AVAIL_F_NO_INTERRUPT was set, BE will not inject interrupt.
Without memory barrier, before FE mask VRING_AVAIL_F_NO_INTERRUPT, BE
has finished notify without interrupt, then FE mask
VRING_AVAIL_F_NO_INTERRUPT, and get used ring index but failed (index
has changed from BE side). FE will return from interrupt handler
function, and wait for next interrupt which was not injected by BE. Thus,
this will cause kernel hung.
Tracked-On: #2732
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang Yu <yu1.wang@intel.com>
Dynamic memory stored in 'net' allocated through function 'calloc'
should be freed correspondingly when return fail.
Tracked-On: #2704
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
1G PCI hole is added just after 4G address which is used as the
PCI high MMIO address space. Guest high memory is mapped from 5G
address for both EPT and device model user space address. Guest
e820 table and API vm_map_gpa are updated accordingly.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For virtio-based device, it needs to use virtio_base as the first member
otherwise, virtio_linkup will fail.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Retrieve the encrypted attestation Keybox from CSE
and provision it to RPMB storage.
Tracked-On: #2604
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Wei Xinghai <xinghaix.wei@intel.com>
Signed-off-by: Chen Gang <gang.g.chen@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
When the backend completes a GPIO request, it returns a valid length
to ensure that response correct.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
if the gpio debug is enabled, print gpio mapping information about
virtual gpio and native gpio, also print virtio-gpio data, which shows
the gpio operations flow.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Implement gpio set/get value, direction input/output and set config operations.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
virtio framework implementation for virtio-based gpio virtualization.
virtio-based gpio uses one virtqueue to implement gpio operaions and
frontend gpio chip base and number are provided by virtio config.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Socket is not currently supported as backend for virtio-console.
Kata containers require socket backend for virtio-console in order to
communicate between the agent running in the VM and the proxy running
in the host. In order to support Kata with ACRN, this feature is required.
v1-->v2:
Prevent new accepts on an already established socket connection. This
removes the need for accepted_fd and accept_evp varibles introduced in
previous patch.
v2-->v3:
Fixed coding style and removed debug prints.
Tracked-On: #2448
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
It is possible for multiple timeouts to occur in one mevent epoll
iteration. Providing the number of timer expirations to the timer
callback handlers can be useful. E.g., this could improve emulation of
timing-sensitive hardware components.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The issue leads that the IOC mediator's fd is turned off
incorrectly, causing the IOC mediator to fail.
The root cause is because after closing fd is not set
to an invalid fd.
The issue can be reproduced by the S3 stress test.
Tracked-On: #2301
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The possible memory leak was introduced by commit
7fce2462a0
If mevent add fails in virtio mei, the resource allocated doesn't
be released. This patch fix this memory leak issue.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
The patch fix some string operations issues and also improve readability
of several snippet.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Reuse linux common virtio header file and remove the repetitive
definition.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support DISCARD command is meaningful when eMMC usage is high or
there are lots of remove operations. For example, when Guest
Android is running, there will be lots of files being created and
removed. However, virtio-blk BE does not support DISCARD command,
data remove operation in UOS will not trigger erase in eMMC. After
period of time, the eMMC will be consumed out, and erase must be
done by eMMC firmware before writing any new data. This causes the
eMMC performance decrease in the whole system (SOS and UOS).
To solve the problem, DISCARD should be supported in virtio-blk BE.
Tracked-On: #2011
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Replace sscanf in device model hw directory
Tracked-On: #2079
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: <yonghua.huang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
irqfd only supports msix devices. In the current code a mevent is
added to poll the callfd from userspace to support intx devices.
This patch removes the support for non-msix devices since they are
not used in the current device model.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-net resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called. A ref_count
is added to virtio_console data structure. Teardown callback needs to
free the resources of the backend and when the ref_count of the
virtio_console is zero the whole virtio-console is freed.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-input resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Physical NIC mac address is used for generate UOS mac address.
This patch uses a new parameters to pass this information
instead of vm name.
Tracked-On: #1987
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
EV_MSC is configured as INPUT_PASS_TO_ALL in input driver. There is
a loop in the use case of virtio-input. They should not be forwarded
back to BE since they have already been sent to native driver before
sending to FE.
Tracked-On: #2006
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Pass teardown callback when add mevent in mei mediator code.
Which could avoid run_callback calling after the related data
structure is freed.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There is one race issue between mevent callback (which is called
in mevent_dispatch thread) and mevent_delete (which could be called
in dev thread). And the callback is called after mevent_delete.
libevent have the exactly same issue. The issue is decripted here:
https://github.com/libevent/libevent/blob/master/whatsnew-2.1.txt
The fixing is:
We introduce a teardown callback to mevent and make sure there is
no race issue between callback and teardown call.
This patch updates the mevent API and the caller as well.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Device trap has great impact on latency of real time (RT) tasks.
This patch provide a virtio poll mode to avoid trap.
According to the virtio spec, backend devices can declare the
notification is not needed so that frontend will never trap.
This means the backends make commitment to the frontends they have a
poll mechanism which don’t need any frontends notification.
This patch uses a periodic timer to give backends pseudo notifications
so that drive them processing data in their virtqueues. People should
choose a appropriate notification peroid interval to use this poll
mode. Too big interval may cause virtqueue processing latency while
too small interval may cause high SOS CPU usage. The suggested interval
is between 100us to 1ms.
The poll mode is not enabled by default and traditional trap
notification mode will be used. To use poll mode for RT with interval
1ms. You can add following acrn-dm parameter.
--virtio_poll 1000000
Tracked-On: #1956
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
It is preferred to state the absence of a return value explicitly in the
doxygen-stile comments. Currently there are different styles of doing this,
including:
@return None
@return NULL
@return void
@return N/A
This patch unifies the above with `@return None`.
Tracked-On: #1595
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
v4 -> v5
Replace strcpy with strncpy
Refine resource free if error happens
Remove meaningless *in_progress* label for pthread wait/signal
Rename the coreu thread routine name (virtio_coreu_thread)
v3 -> v4
Move setsocketopt to connect_to_daemon
Cleanup coreu file descriptor after close
Reconnect CoreU daemon if the socket descriptor is invalid
v2 -> v3
Move the daemon connection to vdev_init
Diagram the CoreU virtualization architecture
Create a seperate thread for sending and receving the CoreU message
Change the socket name
v1 -> v2
No change
v1
Initial CoreU back-end driver
Signed-off-by: Yu Shiqiang <shiqiang.yu@intel.com>
Simple atomic add/dec do no guarantee reference count full
synchronization without a lock. Compare and swap operations
are required for correct implementation.
Tracked-On: #1875
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Fix the prefix comparison, we need to compare on prefix length, not
on devpath len, otherwise we always fail.
Tracked-On: #1848
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Reset directory name to receive clean prints.
Tracked-On: #1847
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Edge triggered mevent on sysfs file is triggered
immediately after mevent_add(), hence this has to be ignored.
The issue that is resolved that the 'first' flag was
global and wasn't reset on each mevent_add().
Tracked-On: #1846
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
Prevent intercepting reset callback if reset state
transition is already in progress.
Tracked-On: #1846
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Acked-by: Yu Wang <yu1.wang@intel.com>
(EV_MSC, MSC_TIMESTAMP) is added to each frame just before the
SYN event since kernel 4.15. EV_MSC is configured as
INPUT_PASS_TO_ALL. In the use case of virtio-input, there is
a loop as follows:
- A mt frame with (EV_MSC, MSC_TIMESTAMP) is passed to FE.
- FE will call virtinput_status to pass (EV_MSC, MSC_TIMESTAMP)
back to BE.
- BE writes this event to evdev. Because (EV_MSC, MSC_TIMESTAMP)
is configured as INPUT_PASS_TO_ALL, it will be written into
the event buffer of evdev then be read out by BE without
SYN followed.
- Each mt frame will introduce one (EV_MSC, MSC_TIMESTAMP).
Later the frame becomes larger and larger...
This patch fixed above issue by ignoring MSC_TIMESTAMP from guest.
Besides that timestamp is added for every status event from guest
before writing to evdev.
Tracked-On: #1670
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The FW reset is currently detected from two points upon
a read failure from native read and from the reset
handler.
The fix removes the detection from the mevent rx callback,
leaving a single detection point.
To prevent reset hiccup, hw_ready is not set if a full rescan is
performed, it will be set only when virtio FW will request the FW reset.
Tracked-On: #1632
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
vmei_host_client_to_vmei() may return NULL we need to check
for the return value.
Tracked-On: #1630
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Simplify the flow by adding mutex_type variable
and call pthread_mutexattr_destroy() on the error path.
Tracked-On: #1630
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
MEI HBM the disconnect replay doesn't have the address set,
breaking the protocol, fix the issue.
Tracked-On: #1570
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Virtio-console device specific configuration is readonly, callback
for the cfgwrite is not required. This patch removed the unused
virtio_console_cfgwrite.
Tracked-On: #1364
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
sscanf and strcpy are banned according to the security requirements.
So replace them with their safe alternative.
Tracked-on: #1496
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
physical RPMB is accessed if "phisycal_rpmb" is specified
in launch.sh.
Also it reserves some RPMB area with a fixed size(32KB) for
AttKB and future usage, which is RO for UOS.
Tracked-On: #1544
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
In vmei_start() the HBM host client is created,
it handles HBM protocol.
The HBM client is a management object and
is not exposed by the mei native driver.
The communication between TX and RX threads
is handed via internal pipe(2).
Second, we connect all fixed address clients as the mei
protocol doesn't provide connection mechanism for them,
they appear always connected.
Last, the hw_ready is set.
Define virtio_mei_ops, ass all the handlers are now available.
Tracked-On: #1536
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Rx is triggered from epoll event (mevent), a host client
is retrieved from associated event data. P proper mei message header is
attached to the packet and sent to the virtio FE device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
TX from virtio driver is handled firt via
virio tx notify handler vmei_notify_tx(),
placed into host clinet tx circular buffer.
TX thread will then write the data to the device.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Implement the FW part of the HBM protocol.
Currently the support version is 2.0.
The HBM protocol handles client management, such
initialization handshake, connection, power management,
and the flow control.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ME client enumeration is received from sysfs attributes
of the native device.
V3: Use bounded functions.
Tracked-On: #1536
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei mediator perform reset handshake via
the cfgread/write handlers and provide access
to fw status registers.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
There are multiple types of resets that need to be handled
by the mei device.
The reset may be initiated from both sides host or fw.
The host requests reset on probe and remove,
power state transaction, and errors,
while ME FW may request reset upon error.
If the native device undergo reset the host application
has to be notified.
Tracked-On: #1536
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
1. virtio_mei structure represents an instance of mei device.
2. vmei_me_client represents an ME application in the MEI FW.
3. vmei_host_client represent a host application talking to the
ME application, ME application can support multiple connections.
4. Add debug helpers
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The virtio has two virtio queues, TX and RX.
TX have two segment buffers one for header and one for data.
The virtio_mei declares host buffer of size 128 slots, each
slot is a 4 bytes value.
For synchronization hw_ready and host_reset configuration flags
are used that emulates mei reset flow.
And last fw status registers must be also readable via virtio
mei device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei handles objects on the list, hence reference counting
infrastructure is required for easier multithreading.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
libuuid sports only uuid (big endian encoding),
though mei requires guids (little endian encoding).
The base types are based on <linux/uuid.h> header.
Tracked-On: #1536
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Remove virtio_heci to be replaced with virtio_mei
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
As RPMB mux kernel module is going to be created,
there are two corresponding changes required for DM:
1. The name has been changed to /dev/rpmbmux.
2. DM does NOT check MAC of RPMB result returned by kernel
module because DM doesn't own the real key.
Tracked-On: #1508
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
VirtIO v1.0 spec 04 5.2.5:
- Protocol unit size is always 512 bytes.
- blk_size (logical block size) and physical_block_exp (physical block
size) do not affect the units in the protocol, only performance.
VirtIO v1.0 spec 04 5.2.6.1:
- A driver MUST NOT submit a request which would cause a read or write
beyond capacity.
Reject the requests that violate these terms.
v1 -> v2:
- add more comments for clarity
Tracked-On: #1422
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
movb is used for registers STATUS and CFGGENERATION whose size is 1
byte. Previously hv cannot report the correct MMIO trap size for
movb and virtio hard coded their size to 4 as a workaround. hv fixed
movb instruction emulation and MMIO size can be reported correctly.
This patch removes those workaround.
commit 9df8790ffc ("hv: Fix two minor issues in instruction emulation code")
Tracked-On: #1449
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Use strnlen instead of strlen to avoid potential security issue.
Tracked-On: #1364
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
One additional command parameter is added for virtio-net to support
vhost net. The command line for vhost net is as follows:
-s n,virtio-net,tap_xxx,vhost
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost proxy interacts with vhost kernel thru vhost char dev. Internal
interfaces are implemented based on ioctls of vhost char dev in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are 2 eventfds for one virtqueue, one is for kick and the other
is for notify. eventfd used for kick is associated with a PIO/MMIO
region. eventfd used for notify is associated with a MSIx/INTx. The
eventfd pair is registered to VHM thru VHM char dev.
VHM irqfd currently only support MSIx. If INTx is used, vhost proxy
uses mevent to poll the call fd from vhost then inject interrupt to
guest.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost kernel driver needs the information of memory mapping between
GPA and the virtual addresses in device model process. This is
required for virtqueue related operations. This patch gets memory
mapping information from vmctx then conveys to vhost.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost_vq related interfaces are implemented in this patch. They are
vhost_vq_init/vhost_vq_deinit/vhost_vq_start/vhost_vq_stop.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds the vhost support to the device model virtio. A vhost
proxy is implemented based on the virtio framework and vhost char dev.
Key data structures and external interfaces are implemented in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some virtio ring structures and virtio feature bits are using the
same name/definition as those in kernel header files(linux/
virtio_ring.h, linux/virtio_config.h). Kernel header files must
be included to perform ioctls to support vhost. There are
compiling errors due to duplicated definitions. In this patch
the following renamings are done:
VRING_DESC_F_NEXT -> ACRN_VRING_DESC_F_NEXT
VRING_DESC_F_WRITE -> ACRN_VRING_DESC_F_WRITE
VRING_DESC_F_INDIRECT -> ACRN_VRING_DESC_F_INDIRECT
VRING_AVAIL_F_NO_INTERRUPT -> ACRN_VRING_AVAIL_F_NO_INTERRUPT
VRING_USED_F_NO_NOTIFY -> ACRN_VRING_USED_F_NO_NOTIFY
VIRTIO_F_NOTIFY_ON_EMPTY -> ACRN_VIRTIO_F_NOTIFY_ON_EMPTY
VIRTIO_RING_F_INDIRECT_DESC -> ACRN_VIRTIO_RING_F_INDIRECT_DESC
VIRTIO_RING_F_EVENT_IDX -> ACRN_VIRTIO_RING_F_EVENT_IDX
VIRTIO_F_VERSION_1 -> ACRN_VIRTIO_F_VERSION_1
vring_avail -> virtio_vring_avail
vring_used -> virtio_vring_used
vring_size -> virtio_vring_size
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Netmap/vale attempts to speed up network communication by bypassing the
TCP/IP network stack, which requires patching the physical NIC driver so
that applications developed based on netmap can interact directly with
the physical NIC driver. It may make sense for some specific scenarios
which requres very high bandwith (10Gb/s or 100Gb/s), we can even put up
with the complexity and compatibility introduced by this techology.
However for ACRN, a virtualization solution for IoT, there is no need to
support this backend. For 1Gb NICs or below, the VBS-U/tap solution
can already achieve near-native bandwidth. To keep simplicity and
improve compatibility, remove the netmap/vale support in dm.
Tracked-On: #1313
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When reset VBS-K status should be set to VIRTIO_DEV_INIT_SUCCESS
because at the time the char dev of VBS-K is still opened and
when set_status callback is called later, it depends on
VIRTIO_DEV_INIT_SUCCESS to resume.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
A new ioctl is introduced in VBS-K to issue reset command to kernel
VBS-K driver. This is used to support VBS-K S3. When FE enters S3
reset command is sent to device model. Backend driver in device model
should use this ioctl to inform the VBS-K drvier in kernel.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
RPMB frontend driver in UOS kernel has fixed unstable issue,
which requires BE for update as well. E.g. structure adjustment,
definition modification and so on.
Signed-off-by: Deng Wei <wei.a.deng@intel.com>
Signed-off-by: Huang Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
This device model is to configure the virtual IPU PCI device.
In order to execute this DM the lauch script needs to add
virtio-ipu as parameter to acrn-dm
For e.g. -s 21,virtio-ipu
Signed-off-by: Bandi,Kushal <kushal.bandi@intel.com>
Randomness sourced from /dev/random which does not block
once it has been seeded at bootup and you will always get
something when you read from that file. This is true on
Freebsd but unfortunately things are not the same on Linux.
Most cases, you can't read anything from /dev/random especially
on current acrn platform which lacking random events.
virtio_rnd inherted from freebsd doesn't work anymore.
This patch makes virtio_rnd working on Linux based SOS. It uses
blocking IO to sevice the front-end random driver and delays the
read operation into a new thread to avoid blocking the main
notify thread.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. support "writeback" and "writethru" mode toggling for virtio-blk
conditionally. When starting DM with "writethru" parameter in
virtio-blk, guest OS could not toggle cache mode. When starting DM
with "writeback" parameter in virtio-blk, guest OS could toggle
cache mode.
------------------------------
DM cmdline | toggle support
------------+-----------------
writeback | yes
writethru | no
------------------------------
2. To toggle cache mode, run below command in guest OS:
echo "write back" > /sys/devices/xxx/vdx/cache_type
OR
echo "write through" > /sys/devices/xxx/vdx/cache_type
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
currently, each virtio device has their own virtio_ops implementation.
Take virtio-blk for example:
static struct virtio_ops virtio_blk_ops = {
"virtio_blk",
1,
sizeof(struct virtio_blk_config),
virtio_blk_reset,
virtio_blk_notify,
virtio_blk_cfgread,
virtio_blk_cfgwrite,
NULL,
NULL,
VIRTIO_BLK_S_HOSTCAPS,
};
If start DM with two virtio-blk, this global variable will be
assigined to two virtio-blk instances. Changing hv_caps for one
instance will affect others. But different instances may need
different capabilities.
To support this requirement, we suggest to move hv_caps to
virtio_base structure, and each instance can return their own
capabilities.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
