Add two Kconfig pSRAM config:
one for whether to enable the pSRAM on the platfrom or not;
another for if the pSRAM is enabled on the platform whether to enable
the pSRAM in the pre-launched RTVM.
If we enable the pSRAM on the platform, we should remove the pSRAM EPT
mapping from the SOS to prevent it could flush the pSRAM cache.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
update the help message of config SCENARIO to set 2 standard
post-launched VMs for default hybrid_rt scenario in Kconfig.
Tracked-On: #5390
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previously the min load_addr for HV image is hard coded to 0x10000000 when
CONFIG_RELOC is enabled, now use CONFIG_HV_RAM_START as its prefer minimum
address like setting of CONFIG_PHYSICAL_START do in Linux kernel.
With this patch, we can offload the CONFIG_HV_RAM_START algorithm to
acrn-config or manually set it in scenario XML on some special boards.
Tracked-On: #5275
Signed-off-by: Victor Sun <victor.sun@intel.com>
BDF string can be parsed by the configuration tool. A 16bit WORD value with
format (B:8, D:5, F:3) can be passed from configuration to the
hypervisor directly to save some BDF string parse code.
Tracked-On: #4937
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
New board, EHL CRB, does not have legacy port IO UART. Even the PCI UART
are not work due to BIOS's bug workaround(the BARs on LPSS PCI are reset
after BIOS hand over control to OS). For ACRN console usage, expose the
debug UART via ACPI PnP device (access by MMIO) and add support in
hypervisor debug code.
Another special thing is that register width of UART of EHL CRB is
1byte. Introduce reg_width for each struct console_uart.
Tracked-On: #4937
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Enhance the help text that accompanies the CONFIG_SCENARIO symbol in Kconfig
Tracked-On: #5203
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The ivshmem memory regions use the memory of the hypervisor and
they are continuous and page aligned.
this patch is used to initialize each memory region hpa.
v2: 1) if CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED is not defined, the
entire code of ivshmem will not be compiled.
2) change ivshmem shared memory unit from byte to page to avoid
misconfiguration.
3) add ivshmem configuration and vm configuration references
v3: 1) change CONFIG_IVSHMEM_SHARED_MEMORY_ENABLED to CONFIG_IVSHMEM_ENABLED
2) remove the ivshmem configuration sample, offline tool provides default
ivshmem configuration.
3) refine code style.
v4: 1) make ivshmem_base 2M aligned.
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we have complicated check mechanism on platform_acpi_info.h which
is supposed to be generated by acrn-config tool, but given the reality that
all configurations should be generated by acrn-config before build acrn
hypervisor, this check is not needed anymore.
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The SDC scenario configurations will not be validated so remove it from
build makefile;
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The make command is same as old configs layout:
under acrn-hypervisor folder:
make hypervisor BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
under hypervisor folder:
make BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
if BOARD/SCENARIO parameter is not specified, the default will be:
BOARD=nuc7i7dnb SCENARIO=industry
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are some devices (like Samsung NVMe SSD SM981/PM981 which has 33 MSIX tables)
which have more than 16 MSIX tables. Extend the default value to 64 to handle them.
Tracked-On: #4994
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Script only append 'U' for the config of int with a range.
Add a range to MAX_IR_ENTRIES.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Update efi bootloader image file path for Yocto rootfs in Kconfig.
Tracked-On: #4868
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Snoop control will not be turned on by hypervisor, delete snoop control
related code.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
CDP is an extension of CAT. It enables isolation and separate prioritization of
code and data fetches to the L2 or L3 cache in a software configurable manner,
depending on hardware support.
This commit adds a Kconfig switch "CDP_ENABLED" which depends on "RDT_ENABLED".
CDP will be enabled if the capability available and "CDP_ENABLED" is selected.
Tracked-On: #4604
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
#AC should be normally enabled for slpitlock detection, however,
community developers may want to run ACRN on buggy system.
In this case, CONFIG_ENFORCE_TURNOFF_AC can be used to turn off the
#AC, to let the guest run without #AC.
Tracked-On: #4765
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove sdc2 scenario since the VM launch requirement under this scenario
could be satisfied by industry scenario now;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
In industry scenario, hypervisor will support 1 post-launched RT VM
and 1 post-launched kata VM and up to 5 post-launched standard VMs;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
The patch enables CPU sharing feature by default, the default scheduler is
set to SCHED_BVT;
Tracked-On: #4661
Signed-off-by: Victor Sun <victor.sun@intel.com>
On most board the MCFG base is set to 0xe0000000, so modify this value in
platform_acpi_info.h for generic boards;
The description of ACPI_PARSE_ENABLED is modified also to match its usage.
Tracked-On: #4157
Signed-off-by: Victor Sun <victor.sun@intel.com>
CONFIG_MAX_KATA_VM_NUM is a scenario specific configuration, so it is better
to put the MACRO in scenario folder directly, to instead the Kconfig item in
Kconfig file which should work for all scenarios;
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
Basicly ACRN scenario is a configuration name for specific usage. By giving
scenario name ACRN will load corresponding VM configurations to build the
hypervisor. But customer might have their own scenario name, change the
scenario type from choice to string is friendly to them since Kconfig source
file change will not be needed.
With this change, CONFIG_$(SCENARIO) will not exist in kconfig file and will
be instead of CONFIG_SCENARIO, so the Makefile need to be changed accordingly;
Tracked-On: #4616
Signed-off-by: Victor Sun <victor.sun@intel.com>
To support server platforms with more than 8 IO-APICs
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
- need to specify the load_addr in the multiboot2 address tag. GRUB needs
it to correctly calculate the ACRN binary's load size if load_end_addr is
a non-zero value.
- multiboot2 can be enabled if hypervisor relocation is disabled.
- print the name of the boot loader. This might be helpful if the boot
loader, e.g. GRUB, inludes its version in the name string.
Tracked-On: #4441
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
GRUB multiboot2 doesn't support relocation for ELF, which means it can't
load acrn.32.out to other address other than the one specified in ELF
header. Thus we need to use the raw binary file acrn.bin, and add
address/entry address/relocatable tags to instruct multiboot2 loader
how to load the raw binary.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
cache configuration.
This patch creates a generic infrastructure for
RDT resources instead of just L2 or L3 cache. This
patch also fixes L3 CAT config overwrite by L2 in
cases where both L2 and L3 CAT are supported.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add multiboot2 header info in HV image so that bootloader could
recognize it.
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
BVT (Borrowed virtual time) scheduler is used to schedule vCPUs on pCPU.
It has the concept of virtual time, vCPU with earliset virtual time is
dispatched first.
Main concepts:
tick timer:
a period tick is used to measure the physcial time in units of MCU
(minimum charing unit).
runqueue:
thread in the runqueue is ordered by virtual time.
weight:
each thread receives a share of the pCPU in proportion to its
weight.
context switch allowance:
the physcial time by which the current thread is allowed to advance
beyond the next runnable thread.
warp:
a thread with warp enabled will have a change to minus a value (Wi)
from virtual time to achieve higher priority.
virtual time:
AVT: actual virtual time, advance in proportional to weight.
EVT: effective virtual time.
EVT <- AVT - ( warp ? Wi : 0 )
SVT: scheduler virtual time, the minimum AVT in the runqueue.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If one of the enabled VT-d DMAR units
doesn’t support snoop control,
then bit 11 of leaf PET of EPT is not set,
since the field is treated as reserved(0)
by VT-d hardware implementations
not supporting snoop control.
GUP IOMMU doesn’t support snoop control,
this patch add an option to disable
iommu snoop control for gvt-d.
v2 -> v3:
* refine the MICRO name and description.
Tracked-On: #4405
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Wu Binbin <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In platforms that support CAT, when it is enabled by ACRN, i.e.
IA32_resourceType_MASK_n registers are programmed with customized values,
it has impacts to the whole system.
The per guest flag GUEST_FLAG_CLOS_REQUIRED suggests that CAT may be
enabled in some guests, but not in others who don't have this flag,
which is conceptually incorrect.
This patch removes GUEST_FLAG_CLOS_REQUIRED, and adds a new Kconfig
entry CAT_ENABLED for CAT enabling. When it's enabled, platform_clos_array[]
defines a set of system-wide Class of Service (COS, or CLOS), and the
per guest vm_configs[].clos associates the guest with particular CLOS.
Tracked-On: #2462
Signed-off-by: Zide Chen <zide.chen@intel.com>
When user use make menuconfig to configure memory related kconfig items,
we need add range check to avoid compile error or other potential issues:
CONFIG_LOW_RAM_SIZE:(0 ~ 0x10000)
the value should be less than 64KB;
CONFIG_HV_RAM_SIZE: (0x1000000 ~ 0x10000000)
the hypervisor RAM size should be supposed between
16MB to 256MB;
CONFIG_PLATFORM_RAM_SIZE: (0x100000000 ~ 0x4000000000)
the platform RAM size should be larger than 4GB
and less than 256GB;
CONFIG_SOS_RAM_SIZE: (0x100000000 ~ 0x4000000000)
the SOS RAM size should be larger than 4GB
and less than 256GB;
CONFIG_UOS_RAM_SIZE: (0 ~ 0x2000000000)
the UOS RAM size should be less than 128GB;
Tracked-On: #4229
Signed-off-by: Victor Sun <victor.sun@intel.com>
Set default CONFIG_KATA_VM_NUM to 1 in SDC scenario so that user could
have a try on Kata container without rebuilding hypervisor.
Please be aware that vcpu affinity of VM1 in CPU partition mode
would be impacted by this patch.
Tracked-On: #4232
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current architecutre, the maximum vCPUs number per VM could not
exceed the pCPUs number. Given the MAX_PCPU_NUM macro is provided
in board configurations, so remove the MAX_VCPUS_PER_VM from Kconfig
and add a macro of MAX_VCPUS_PER_VM to reference MAX_PCPU_NUM directly.
Tracked-On: #4230
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For now, we set NOOP scheduler as default. User can choose IORR scheduler as needed.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch updates kconfig to support server platforms
for increased number of VCPUs per VM and PT IRQ number.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4196
Add a option MCE_ON_PSC_WORKAROUND_DISABLED to disable the software
workaround for the issue Machine Check Error on Page Size Change.
Tracked-On: #4101
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a Kconfig parameter called UEFI_OS_LOADER_NAME to hold the Service VM EFI
bootloader to be run by the ACRN hypervisor. A new string manipulation function
to convert from (char *) to (CHAR16 *) has been added to facilitate the
implementation.
The default value is set to systemd-boot (bootloaderx64.efi)
Tracked-On: #2793
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The value of CONFIG_MAX_IOMMU and MAX_DRHDS are identical to DRHD_COUNT
which defined in platform ACPI table, so remove CONFIG_MAX_IOMMU_NUM
from Kconfig and link these three MACROs together.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the minimum set of TLFS functionality. It
includes 6 vCPUID leaves and 3 vMSRs.
- 0x40000001 Hypervisor Vendor-Neutral Interface Identification
- 0x40000002 Hypervisor System Identity
- 0x40000003 Hypervisor Feature Identification
- 0x40000004 Implementation Recommendations
- 0x40000005 Hypervisor Implementation Limits
- 0x40000006 Implementation Hardware Features
- HV_X64_MSR_GUEST_OS_ID Reporting the guest OS identity
- HV_X64_MSR_HYPERCALL Establishing the hypercall interface
- HV_X64_MSR_VP_INDEX Retrieve the vCPU ID from hypervisor
Tracked-On: #3832
Signed-off-by: wenwumax <wenwux.ma@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MAX_PCPU_NUM is different on various BOARDs. So we move the generic
definition from Kconfig to each board's config header file.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
The settings of SOS VM COM1 which is used for console is board specific,
and this result in SOS VM COM2 which used for VM communication is also
board specific, so move the configure method from Kconfig to board configs
folder. The MACRO definition will be handled by acrn-config tool in future.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Per community requirement;up to three post-launched VM might be
needed for some automotive SDC system, so add SDC2 scenario to
satisfy this requirement.
Tracked-On: #3429
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
In current design, devicemodel passes VM UUID to create VMs and hypervisor
would check the UUID whether it is matched with the one in VM configurations.
Kata container would maintain few UUIDs to let ACRN launch the VM, so
hypervisor need to add these UUIDs in VM configurations for Kata running.
In the hypercall of hcall_get_platform_info(), hypervisor will report the
maximum Kata container number it will support. The patch will add a Kconfig
to indicate the maximum Kata container number that SOS could support.
In current stage, only one Kata container is supported by SOS on SDC scenario
so add one UUID for Kata container in SDC VM configuration. If we want to
support Kata on other scenarios in the future, we could follow the example
of this patch;
Tracked-On: #3402
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove couple of run-time ASSERTs in ioapic module by checking for the
number of interrupt pins per IO-APICs against the configured MAX_IOAPIC_LINES
in the initialization flow.
Also remove the need for two MACROs specifying the max. number of
interrupt lines per IO-APIC and add a config item MAX_IOAPIC_LINES for the
same.
Tracked-On: #3299
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Hybrid scenario will run 3 VMs: one pre-launched VM, one pre-launched SOS VM
and one post-launched Standard VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously we use Kconfig of DMAR_PARSE_ENABLED to choose pre-defined DMAR info
or parse it at runtime, at the same time we use MACRO of CONFIG_CONSTANT_ACPI
to decide whether parse PM related ACPI info at runtime. This looks redundant
so use a unified ACPI_PARSE_ENABLED Kconfig to replace them.
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The MACRO of CONFIG_CONSTANT_ACPI will be defined per scenario usage,
so move it from Kconfig to vm_configurations.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commmit added one more guest VM to the industry scenario, to
be aligned with the HLD for the industry usage.
With this commit, 4 VMs could be launched at maximum: 1 SOS VM and 3 post-launced VM.
Tracked-On: #3039
Signed-off-by: Yan, Like <like.yan@intel.com>
