Cleanup "cpu_secondary_xx" in the symbols/section/functions/variables
name in trampline code.
There is item left: the default C entry is Ap start c entry. Before
ACRN enter S3, the c entry will be updated to high level S3 C entry.
So s3 resume will go s3 resume path instead of AP startup path.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- unmask MTRR from guest CPUID to enable MTRR
- MTRR virtualization can be disabled by commenting out CONFIG_MTRR_ENABLED
Signed-off-by: bliu11 <baohong.liu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-rdmsr: emulate all MTRR registers besides variable range MTRRs
-wrmsr: emulate all MTRR registers besides variable range MTRRs and MTRRCAP
Signed-off-by: bliu11 <baohong.liu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per performance consideration, we don't flush vcpu context when doing
vcpu swithing (because it's only swithing between vcpu and idle).
But when enter S3, we need to call vmclear against all vcpus attached
to APs. We need to know which vcpu is attached with which pcpu.
This patch introduced API to get vcpu mapped to specific pcpu.
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
keep the global variables access exclusive in vcpu pause & resume.
Signed-]off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current implementation of per_cpu relies on several non-c99 features,
and in additional involves arbitrary pointer arithmetic which is not MIS-
RA C friendly.
This patch introduces struct per_cpu_region which holds all the per_cpu
variables. Allocation of per_cpu data regions and access to per_cpu vari-
ables are greatly simplified, at the cost of making all per_cpu varaibl-
es accessible in files.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Enable VMX vpid ctrl and assign an unique vpid to each vcpu
so that VMX transitions are not required to invalidate any
linear mappings or combined mappings.
SDM Vol 3 - 28.3.3.3
If EPT is in use, the logical processor associates all mappings
it creates with the value of bits 51:12 of current EPTP.
If a VMM uses different EPTP values for different guests, it may
use the same VPID for those guests. Doing so cannot result in one
guest using translations that pertain to the other.
In our UOS, the trusty world and normal world are using different
EPTP. So we can use the same VPID for it.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current code, sos/uos bsp can only start from 64bit mode.
For sbl platform:
This patch start sos bsp from protected mode by default.
CONFIG_START_VM0_BSP_64BIT is defined to allow start sos bsp
from 64bit mode. If a config CONFIG_START_VM0_BSP_64BIT
defined in config file, then sos bsp will start from 64bit mode.
This patch start uos bsp from real mode, which needs the integration
of virtual bootloader (vsbl).
For uefi platform:
This patch sets sos bsp vcpu mode according to the uefi context.
This patch starts uos bsp from protected mode, because vsbl is not ready
to publish for uefi platform yet. After vsbl is ready, can change to
start uos bsp from real mode.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
In current implementation, on sbl platform, vm0 bsp
starts from 64bit mode. And hv need to prepare init
page table for it.
In this patch series, on sbl platform, vm0 bsp starts
from non-paging protected mode.
This patch prepares an init gdt for vm0 bsp on sbl
platform.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Translate gva2gpa in different paging modes.
Change the definition of gva2gpa.
- return value for error status
- Add a parameter for error code when paging fault.
Change the definition of vm_gva2gpa.
- return value for error status
- Add a parameter for error code when paing fault.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Use # of paging level to identify paging mode
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
In current implemenation, cr0/cr4 host mask value are set
according to the value from fixed0/fixed1 values of cr0/cr4.
In fact, host mask can be set to the bits, which need to be trapped.
This patch, add code to support exiting long mode in CR0 write handling.
Add some check when modify CR0/CR4.
- CR0_PG, CR0_PE, CR0_WP, CR0_NE are trapped for CR0.
PG, PE are trapped to track vcpu mode switch.
WP is trapped for info of protection when paing walk.
NE is always on bit.
- CR4_PSE, CR4_PAE, CR4_VMXE are trapped for CR4.
PSE, PAE are trapped to track paging mode.
VMXE is always on bit.
- Reserved bits and always off bits are not allow to be set by guest.
If guest try to set these bits when vmexit, a #GP will be injected.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
_Static_assert is supported in C11 standard.
Please see N1570(C11 mannual) 6.4.1.
replace _Static_assert with ASSERT.
Signed-off-by: huihuang shi <huihuang.shi@intel.com>
The following massages is not fatal error but should be print to serial and
sbuf at the same time. pr_fatal is not a good choice. pr_acrnlog is designed
to deal with the situation. So replace the following misused pr_fatal with
pr_acrnlog.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Hypervisor shouldn't deal with errno return by hypercall.
The SOS should do this. Here just return the errno to SOS.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
vm_state_info in struct vm_arch is not used, remove it
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When we create an UOS, we didn't indicate the vmid.
Thus we can't get the vm description for the vm
description array.
Instead we use a temporary vm description to save data to
fill the vm structure when crate an UOS. It's uselesss once
UOS has created. So we don't need to maintain vm description
array here for UOS.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Pointer arithmetic is currently used to calculate the address of a specific
Local Vector Table (LVT) register (except LVT_CMCI) in lapic, since the
registers are continuously placed with fixed padding in between. However each of
these registers are declared as a single uint32_t in struct lapic, resulting
pointer arithmetic on a non-array pointer which violates MISRA C requirements.
This patch refactors struct lapic by converting the LVT registers fields (again
except LVT_CMCI) to an array named lvt. The LVT indices are reordered to reflect
the order of the LVT registers on hardware, and reused to index this lvt array.
The code before and after the changes is semantically equivalent.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
use func vcpu_queue_exception for vcpu_inject_gp and exception_vmexit_handler.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
It is an extension of GCC CPP to:
* allow omitting a variable macro argument entirely, and
* use ## __VA_ARGS__ to remove the the comma before ## __VA_ARGS__ when
__VA_ARGS__ is empty.
The only use of ## _VA_ARGS__ is to define the pr_xxx() macros, with the first
argument being the format string and the rest the to-be-formatted arguments. The
format string is explicitly spelled out because another macro pr_fmt() is used
to add to the format string a prefix which is customizable by defining what
pr_fmt() expands to.
For C99 compliance, this patch changes the pr_xxx() macros in the following
pattern.
- #define pr_fatal(fmt, ...) \
- do_logmsg(LOG_FATAL, pr_fmt(fmt), ## __VA_ARGS__); \
+ #define pr_fatal(...) \
+ do_logmsg(LOG_FATAL, pr_prefix __VA_ARGS__); \
Reference:
* https://gcc.gnu.org/onlinedocs/gcc/Variadic-Macros.html#Variadic-Macros
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The macro GET_DATA_SIZE's code style is not correct,
it is merged by accident,the Pull Request
<fix "obsolete use of designated initializer without '='">
have two commid id,the second commit changed the ucode.c
by mistake.
Now fixed.
Signed-off-by: huihuang.shi <huihuang.shi@intel.com>
According to the comments in hypervisor:
" This file includes config header file "bsp_cfg.h" and other
hypervisor used header files.
It should be included in all the source files."
this patch includes all common header files in hypervisor.h
then removes other redundant inclusions
Signed-off-by: Zide Chen <zide.chen@intel.com>
According to the C99 manual 6.5.15
syntax conditional-expression
logical-OR-expression
logical-OR-expression ? expression :conditional-expression
above bnf rules requires expression not be none
Signed-off-by: huihuang.shi <huihuang.shi@intel.com>
there are data transfer between guest(GPA) & hv(HPA), especially for
hypercall from guest.
guest should make sure these GPAs are address continous, but hv cannot
assure HPAs which mapped to these GPAs are address continous, for example,
after enable hugetlb, a contious GPA range could come from two different
2M pages.
this patch is handling such case by doing gpa page walking during
copy_from_vm & copy_to_vm.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
only trusty related hypercall will come from UOS, others should come from VM0
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- MMIO access size is not initialized before
instruction emulation.
- rename 'analyze_instruction()' to 'decode_instruction()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
rename atomic_cmpxchg_int to atomic_cmpxchg
replace atomic_cmpset_long with atomic_cmpxchg64
rename atomic_readandclear_long to atomic_readandclear64
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
1. vpic_wire_mode no need to atomically set its value.
2. uart open conut want to atomically set its value not atomically set
its bits.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Lock should be on target vcpu in function pause_vcpu(), not current vcpu.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add set_memmaps hypercall to support multi regions memmap.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
allocated all pcpus to vm0 to handle possible AP wakeup flow for all cpus,
as we pass org ACPI table to VM0 - that means VM0 can see all CPUs.
SOS(VM0) start expected CPUs through "maxcpus=" kernel cmdline option.
During first hypercall from SOS, calling vm_fixup to free un-expect-enabled
vcpus from VM0.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove sipi_from_efi_boot_service_exit & efi_deferred_wakeup_pcpu workaround
for uefi boot flow
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
wakeup AP need INIT-SIPI-SIPI sequence in old time, now we only need
INIT-SIPI.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the optimization option is enabled, it is possible that one variable is
not initialized before using in the get_vioapic_info. (In fact the warning is
bogus)
This is only to reduce the compiling warning.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Add vlapic_create_timer/vlapic_reset_timer to setup/reset a timer.
Add vlapic_update_lvtt to disarm timer when mode changes.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Using __func__ instead of function string name.
Using tab instead of more whitespace.
Using macro instead of numeric constants.
Remove unnecessary function declaration.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
These code is useless since it just pseudocode. Current it doesn't
support vlapic one-shot/periodic timer.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V2->V3: Updated variable name: trampoline_code_paddr
V1->V2: changed variable name: init_ap_code_addr
These page tablea are sitting right after the trampoline code, so adjust it according to
the actual loaded address for trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
V2->V3: Fixed the booting issue on MRB board and removed the restriction
of allocate memory from address 0
1) Fix the booting from MRB issue
-#define CONFIG_LOW_RAM_SIZE 0x000CF000
+#define CONFIG_LOW_RAM_SIZE 0x00010000
2) changed e820_alloc_low_memory() to handle corner case of unaligned e820 entries
and enable it to allocate memory at address 0
+ a length = end > start ? (end - start) : 0;
- /* We don't want the first page */
- if ((length == size) && (start == 0))
- continue;
3) changed emalloc_for_low_mem() to enable to allocate memory at address 0
- /* We don't want the first page */
- if (start == 0)
- start = EFI_PAGE_SIZE;
V1->V2: moved e820_alloc_low_memory() to guest.c and added the logic to
handle unaligned E820 entries
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
- rename it to 'io_shared_page' to keep consistent
with ACRN HDL foils.
- update related code that reference this data structure.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Make assert on max px cnt of boot cpu data, since it shouldn't happen if
px data is properly initialized in boot process.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
with this patch guest could access idle io port and enter idle normally.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Each VM would have its own Cx data, for now we copy it from boot_cpu_info.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
add initialize_timer to initialize or reset a timer;
add_timer add timer to corresponding physical cpu timer list.
del_timer delete timer from corresponding physical cpu timer list.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Split pm.c from cpu_state_tbl.c to put guest power management related
functions, keep cpu_state_tbl.c to store host cpu state table and
related functions.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
adding "hugepagesz=1G" and "hugepages=X" into SOS cmdline, for X, current
strategy is making it equal
e820_mem.total_mem_size -CONFIG_REMAIN_1G_PAGES
if CONFIG_REMAIN_1G_PAGES is not set, it will use 3 by default.
CONFIG_CMA is added to indicate using cma cmdline option for SOS kernel,
by default system will use hugetlb cmdline option if no CONFIG_CMA defined.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
SDM 24.9.1 Volume3:
- 'Exit reason' field in VMCS is 32 bits.
SDM 24.9.4 in Volume3
- 'VM-exit instruction length' field
in VMCS is 32 bits.
This patch is to redefine the data types of above fields
in 'struct vcpu_arch' and udpate the code using these
two fields.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
remove data defination of mmio_addr_t, vaddr_t, paddr_t,
and ioport_t.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
This address maybe invalid if a hostile address was set
in hypercall 'HC_SET_IOREQ_BUFFER'.it should be validated
before using.
Update:
-- save HVA to guest OS's request buffer in hyperviosr
-- change type of 'req_buf' from 'uint64_t' to 'void *'
-- remove HPA to HVA translation code when using this addr.
-- use error number instead of -1 when return error cases.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Switch all the referenced virtual address to physical address
include ept mapping, vmcs field, vmxon, vmclear, and vmptrld.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Chen, Jason Cl <jason.cj.chen@intel.com>
Reviewed-by: Yakui, Zhao <yakui.zhao@intel.com>
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
APIC-access page which write into VMCS should be hpa
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
virtual-ACPI page which write into VMCS should be hpa
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest write tsc: cache the offset into run_context.tsc_offset;
Guest read tsc : use run_context.tsc_offset to calculate guest_tsc.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before this patch, guest temporary page tables were generated by hardcode
at compile time, HV will copy this page tables to guest before guest
launch.
This patch creates temporary page tables at runtime for the range of 0~4G,
and create page tables to cover new range(511G~511G+16M) with trusty
requirement.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently acrn partitions cpus between SOS and UOS, so the default
policy is to allow guest managing CPU px state. However we would
not blindly passthrough perf_ctrl MSR to guest. Instead guest access
is always trapped and validated by acrn hypervisor before forwarding
to pcpu. Doing so leaves room for future power budget control in
hypervisor, e.g. limiting turbo percentage that a cpu can enter.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
We can use this interface for VHM to pass per-cpu power state data
to guest per its request.
For now the vcpu power state is per-vm, this could be changed if
per-cpu power state support is required in the future.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The vm px info would be used for guest Pstate control.
Currently it is copied from host boot cpu.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
This patch added API destroy_secure_world, which will do:
-- clear trusty memory space
-- restore memory to SOS ept mapping
It will be called when VM is destroyed, furthermore, ept of
Secure world will be destroyed as well.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1.it doesn't support VMX for guest OS
2.for MSR out of control, inject GP to guest OS.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable TSC offset in VMX, so if TSC MSR is changed by guest OS,
write a caculated value into TSC-offset, then host TSC will not be changed.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
UOS_Loader will trigger boot of Trusty-OS by HC_INITIALIZE_TRUSTY.
UOS_Loader will load trusty image and alloc runtime memory for
trusty. UOS_Loader will transfer these information include
trusty runtime memory base address, entry address and memory
size to hypervisor by trusty_boot_param structure.
In hypervisor, once HC_INITIALIZE_TRUSTY received, it will create
EPT for Secure World, save Normal World vCPU context, init
Secure World vCPU context and switch World state to Secure World.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
For ARM, The SMC instruction is used to generate a synchronous
exception that is handled by Secure Monitor code running in EL3.
In the ARM architecture, synchronous control is transferred between
the normal Non-secure state and the Secure state through Secure
Monitor Call exceptions. SMC exceptions are generated by the SMC
instruction, and handled by the Secure Monitor.The operation of
the Secure Monitor is determined by the parameters that are passed
in through registers.
For ACRN, Hypervisor will simulate SMC by hypercall to switch vCPU
State between Normal World and Secure World.
There are 4 registers(RDI, RSI, RDX, RBX) reserved for paramters
passing between Normal World and Secure World.
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
this patch is a preparation for changing ptdev remapping entry from
virtual to physical based, it changes the ptdev_lock from per-vm to
global, as entries based on physical mode are global resource.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Generate all common virtual cpuid entries for flexible support of
guest VCPUID emulation, by decoupling from PCPUID.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Chen, Jason CJ <jason.cj.chen@intel.com>
microcode update from UOS is disabled.
microcode version checking is available for both SOS and UOS.
There are two TODOs of this patch:
1. This patch only update the uCode on pCPUs SOS owned. For the
pCPUs not owned by SOS, the uCode is not updated. To handle
this gap, we will have SOS own all pCPUs at boot time. So
all pCPUs could have uCode updated. This will be handled
in the patch to enable SOS own all pCPUs at boot time.
2. gva2gpa now doesn't check possible page table walk failure.
Will add the failure check in gva2gpa in different patch.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Anthony Xu (anthony.xu@intel.com)
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Tian, Kevin <kevin.tian@intel.com>
this patch is to detect and enable only APICv features which
are actually supported by the processor, instead fo tuning on
all features by default.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
-If "virtual-interrupt delivery" VM-execution control is 0,
Processor will causes an APIC-write VM exit if page offset
is 0xB0 (EOI), SDM Vol3, Chapter 29.4.3
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
this patch save native lapic configuration and restore it to vm0's vlapic
before its running, then doing hpet timer interrupt injection through vlapic
interface -- this will not mess up vlapic and we can see hpet
timer interrupt coming continuously.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to the explaination for pref_address
in Documentation/x86/boot.txt, a relocating bootloader
should attempt to load kernel at pref_address if possible.
But due to a non-relocatable kernel will unconditionally
move itself and to run at perf address, no need to copy
kernel to perf_address by bootloader.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
1. refine multiboot related code, move to /boot.
2. firmware files and ramdisk can be stitched in iasImage;
and they will be loaded as multiboot modules.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
add key info structure
add sworld_eptp in vm structure, and rename ept->nworld_eptp
add secure world control structure
Change-Id:
Tracked-On:220921
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
