Config tool UI will do mutually exclusive check the legacy vuart 0/1 and
PCI vuart 0/1 to make sure there is no legacy vuart and PCI vuart are
used at the same time for VMs.
Tracked-On: #5394
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Add PCI VUART config for post-launched VMs in launch config UI. Users
can configure the console_vuart, configure or dynamically add or remove
communication_vuart based on the communication vuarts which are configured
from the scenario xml.
Tracked-On: #5394
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Add PCI VUART dynamic config for VMs in scenario config UI, keep legacy
VUART config. PCI vuart base can be set to INVALID_PCI_BASE and PCI_VUART;
users will configure the target_vm_id and target_vuart_id when PCI vuart
base is set to PCI_VUART; users can dynamically add or delete PCI vuart
for VMs.
Tracked-On: #5394
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
When creating a new launch setting, config app can't fine the
scenario config which caused the app failed to load the new
launch setting.
Tracked-On: #5282
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Users can add one or more ivshmem shm regions for uos when the shm
regions are configured from scenario setting.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Shared memory regoins can be added or deleted or updated from
scenario settings in config app with sanity check.
v2: move IVSHMEM config to hv->FEATURES->IVSHMEM
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The folders for config xmls and scenario setting source code are moved
to misc/vm_configs/xmls and misc/vm_configs/board, misc/vm_configs/scenario,
so this patch is to update config path for these folders.
Tracked-On: #5077
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
MBA_DELAY/CLOS_MASK show be exposed only if "MBA"/"L2" or "L3" existed
in rdt resource supoorted in board xml;
The default value of MBA_DELAY is 0;
The numbers of MAB_DELAY/CLOS_MASK entries is determined by:
If CDP is not enabled, the number of entries for CLOS_MASK and MBA_DELAY
is the min of CLOS_MAX of all RDT resources;
If CDP is enabled, divide the CLOS_MAX values for L3 and L2 resources
by 2 and then find the min of all RDT resources to get common_clos_max,
the number of entries for CLOS_MASK is common_clos_max*2,
the number of entries for MBA_DELAY is comm_clos_max.
Tracked-On: #4943
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
RDT config item is located in the 5rd layer of scenario config;
the number of CLOS_MASK config is dynamically obtained by the rdt
resource clos max in the board config;
the vcpu_clos config is dynamically added or removed when the
pcpu_id config is added or removed;
the drop-down list of vcpu_clos config is reduced by half when
CDP_ENABLED=y.
Tracked-On: #4860
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
When dynamically creating or adding or deleting VMs, acrn config app
will assign VM IDs for the VMs with the orders of prelaunched VMs and SOS
VM and postlaunched VMs to be consistent with the VM order of vm_configs
in vm configuration. When dynamically creating launch scripts, acrn
config app will let users to specify the VM ID before launch setting.
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
config app implements interfaces to dynamically:
create new scenario settings based on tempaltes;
create new launch settings based on templates;
add or delete VMs for scenario settings;
add or delete VMs for launch settings;
load default scenario or launch settings
Tracked-On: #4641
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Currently we use separate button to generate board configuration files and
scenario configuration files for hypervisor, this is not friendly from UX
perspective. So remove redundant button on HV configuration generation.
Tracked-On: #3854
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Shuang Zheng <shuang.zheng@intel.com>
This is to make acrn config UI supports to edit more than one virtio
input devices in multi-lines.
Tracked-On: #4163
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
add UI to add or remove Kata VM for sdc scenario, the added Kata VM
is based on the generic config xml.
Tracked-On: 4145
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
add a confirmation interface to let user to commit changes into local tree
or not commit after generated source codes in config app.
Tracked-On: #3834
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
fix the issue: some select boxes disappear unexpectly after edited
Tracked-On: #3809
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
According to the new vcpu affinity configuration method, update vcpu
configuration in Web UI from multi-select box to seperated select box
which can dynamically add or delete vcpus with mapped pcpus.
Tracked-On: #3798
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The file format of 2 source files is dos format with line endings
as CRLF, change to unix format with line endings as LF.
Tracked-On: #3760
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
The web UI application for ACRN VM configuration tool based on Flask web framework:
1. import board info xml which is generated by acrn-config/target on target boards; or select one
board from the imported list of UI.
2. load scenario settings or import scenario settings from local.
3. edit scenario settings from web UI.
4. export and save the edited scenario setting, the application will prompt error messages from UI
if there are illegal configured items.
5. generate board source code, generate scenario source code.
6. load launch settings or import launch settings from local.
7. edit launch settings from web UI.
8. export and save the edited launch setting; the application will prompt error messages from UI
if there are illegal configurable items
9. generate launch scripts based on current launch setting.
Tracked-On: #3602
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
