When LINK type TRB are received among multiple BULK TRBs, the copying
logic in DM will miss one or more TRBs. This patch is used to fix it.
Tracked-On: #2926
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The current xHCI mediator doesn't well support disable endpoint command.
This patch is one workaround for disable endpoint command to avoid
xHCI mediator to continue handle already dropped data.
Tracked-On: #2927
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. free memory during pci_xhci_dev_destroy.
2. add libusb_free_device_list to free the list of devices previously
discovered using libusb_get_device_list().
3. fix possible memory corruption.
Tracked-On: #2892
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To keep consistency between HV and DM about PM1A_CNT_ADDR,
it is better to replace the PM1A_CNT related MACROs used in DM
with VIRTUAL_PM1A_CNT related MACROs in acrn_common.h.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Users of pthread_cond_wait() should take care of spurious wakeups and it
is usually used in conjunction with a predicate. Not doing so can result
in unintended behavior. For example:
virtio_net_tx_thread():
entry -> pthread_cond_wait() -> spurious wakeup ->
vq_clear_used_ring_flags() -> segfault (vq->used uninitialized)
tpm_crb_request_deliver():
entry -> pthread_cond_wait() -> spurious wakeup ->
swtpm_handle_request() called needlessly
virtio_rnd_get_entropy():
entry -> pthread_cond_wait() -> spurious wakeup ->
no avail ring processing ->
virtio_rnd_notify() skips pthread_cond_signal() due to
rnd->in_progress ->
vq_endchains() called needlessly ->
wait in pthread_cond_wait() indefinitely
Fix these uses of pthread_cond_wait() by using predicates.
The only use case without a clear predicate is the tx thread in
virtio-mei, because it works with two-dimensional linked lists.
v1 -> v2:
- fix bugs and comments
- reduce code redundancy
Tracked-On: #2763
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Length of vmname is restricted to MAX_VM_OS_NAME_LEN. Keep it
coincide with VM name array size in vm_config.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Guest OS (e.g. Linux) may rely on a gap in E820 map in the 32-bit memory
space to determine the MMIO space for its PCI devices. Leave this gap
when building E820 map to keep the guest's PCI subsystem working.
After commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e, Linux kernel no
longer requires the MMCONFIG region to be reserved in the E820 map.
Nonetheless, keep it in the reserved region to be on the safe side.
Tracked-On: #2843
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
patch is from Alex Du for IASL tool updated to support
ACPI 6.3 version.
Tracked-On: #2568
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
The dummy channels can emulate cbc lifecycle, cbc signal and cbc raw
channel instead canbox, and the feature can be enabled by ioc command
line within wakeup reason bit 24.
Tracked-On: #2481
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The ASL_COMPILER macro is hard coded as /usr/sbin/iasl, it is
complained by some developers. This patch changes it to a
flexible way, by which the following make command lines are
supported:
make
make devicemodel
make ASL_COMPILER=/path/to/iasl
make ASL_COMPILER=/path/to/iasl devicemodel
Tracked-On: #2298
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
vHPET is used as a source of system timer by UEFI (e.g. OVMF).
This provides an alternative to using vPIT, which OVMF assumes is always
connected to vPIC.
This is ported from Bhyve, with a few changes:
- move to user space, using acrn_timer
- enable timers only when necessary
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 326257
Purpose: Adding vHPET support.
Maintained-by: External
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It is possible for multiple timeouts to occur in one mevent epoll
iteration. Providing the number of timer expirations to the timer
callback handlers can be useful. E.g., this could improve emulation of
timing-sensitive hardware components.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The issue will result in the loss of wakeup reason and signal
data, because the CBC header was not added when generating the
tx package.
Tracked-On: #2283
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Clear Linux complains about not finding RTC as a PNP device:
platform rtc_cmos: registered platform RTC device (no PNP device found)
This is a port of Bhyve vRTC's user-space logic.
Tracked-On: #2176
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Expose a new ACPI table PSDS to UOS.
This PSDS table show the security capability of the VM.
Only enable this table in UOS when PSDS presented in SOS.
Tracked-On: #888
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When issue happen, we could identify which thread is impacted.
This could help stability issue debugging.
Tracked-On: #2037
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are several KW issues which uninitialized variables
are used. This patch will fix those KW issues.
Signed-off-by: weideng <wei.a.deng@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
The thread function usb_dev_sys_thread is the source of libusb events,
which is also the basis of USB/xHCI emulation. During S3 process,
function libusb_handle_events_timeout may fail and return -1, which
could result of exit of the thread (BTW, this failure is resulted from
USB native reseting behavior during S3). Under this situation, the emulation
of USB/xHCI could never continue.
This patch fix this issue by continuing to call libusb_handle_events_timeout
even it reture -1. The return value will be finally ok after S3 process is
completed.
This patch will continue poll after failure and hence fix this issue.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Full virtualized TPM CRB device.
The TPM CRB module will handle TPM2 MMIO access. It will forward
the command/data to TPM emulator for command processing if there
is a valid TPM command.
Tracked-On: #1924
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Reviewed-by: Zhu Bing <bing.zhu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
IOC mediator should keep sending acnrd boot reason until received
UOS heartbeat init message, then turn to send SOS wakeup reason
through read native cbc lifecycle cdev.
Tracked-On: #1727
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Accoring to xHCI spec, there are some TRBs with zero data length
which used to pass command to xHCI. In the DM, those TRBs should
not be sent to native device through libusb. The logic in the
current implentation fails to process some corner cases, this
patch is used to fix it.
Tracked-On: #1639
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
- remove ASSERT & DEASSET IRQ line IOCTLs
- remove PULSE IRQ line IOCTLs, use set/clear
IRQ line instead.
- Use IC_SET_IRQLINE to set or clear IRQ line
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When the LINK type TRB are received, it should not be counted as
valid date block to give libusb. This patch is used to fix it.
Tracked-On: #1567
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
physical RPMB is accessed if "phisycal_rpmb" is specified
in launch.sh.
Also it reserves some RPMB area with a fixed size(32KB) for
AttKB and future usage, which is RO for UOS.
Tracked-On: #1544
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
This patch is one workaround to resolve a crash issue for certain brand
touch screen (eGalaxTouch EXC7200-7368v1.01). The formal fix should
follow the xHCI spec to stop xfer and generate transfer completed event
trb prior to Stop Endpoint Command complete event trb. It should be a
big change and for short term, do nothing for the stop endpoint command
which is no other side effect be observed so far.
Tracked-On: #1413
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are many places in USB emulation implementation to get
native USB device infomation, and the related codes are long
and repeated many times. This patch introduces function
usb_get_native_devinfo to remove redundent codes for the
purpose mentioned above.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch introduce struct usb_devpath to indentify uniquely an USB
device, which is basic element for multiple hub support.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Previous design use bus and port(root hub port) for the identification
to the native USB device. It cannot work properly under the multi-hub
situation due to external USB hub is introduced.
This patch removes old hub implementation code, and subsequent patches
will be add support for mutiple hubs.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch addes the debugexit function to DM. If it's enabled
by DM cmdline (by add --debugexit), the guest could write a
32bit value to port 0xF4 to trigger guest shutdown.
Tracked-on: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current RTC emulation is based on sigevent mechanism, replace with
acrn_timer API which based on timerfd/epoll mechanism to avoid
potential resource accessing conflict in the async thread.
Tracked-On: #1489
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
NHLT table contains the settings some audio drivers need.
An ACPI method is used to get NHLT table address & length.
In current DM code, the NHLT talbe length in the ACPI method
is hardcoded, which will cause troubles when the length of the
table changed.
This patch replaces the hardcoded NHLT table length according to
the table length read from SOS.
Tracked-On: #1461
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The patch resolves a bug that signal SteeringWheelSpeechCtrlBtn can not be
received in UOS. the rootcause is signal SteeringWheelSpeechCtrlBtn and
signal SteeringWheelPauseBtn are combined into one multi-signal message and
signal SteeringWheelPauseBtn is not defined.
To fix this, add SteeringWheelPauseBtn definition.
Tracked-On: #1410
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vPIT is used as a source of system timer by UEFI (e.g. OVMF).
This is ported from Bhyve, with a few changes:
- move to user space, using POSIX timer
- support timer mode 3
- improve the emulation of OUT and STATUS byte
- improve the emulation of counter behavior
- improve the emulation of CE update in periodic mode
- treat CR == 0 as 0x10000
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 283291
Purpose: Adding vPIT support.
Maintained-by: External
Tracked-On: #1392
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Some firmware (e.g. UEFI) uses RTC CMOS to fetch the system's memory
configuration. Put lowmem / highmem info in the designated area.
This is a port of Bhyve vRTC's user-space logic.
v1 -> v2:
* move KB/MB/GB to macros.h
* move nvram offset definitions to rtc.h
Tracked-On: #1390
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
