Remove the common interface for sbuf setup, as it is not accept by
kernel side. Instead, use dedicate setup function for asyncio to init
its sbuf.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
asyncio is a new mechanism in ACRN, which is special for these devices
which need high IO performance. ACRN hypervisor would process the IO
request from User VM in an async mode.
Just like the original IOReq shared page, the devicemodel also create a
page for fastio requests. As the asyncio use the ioeventfd, so the
reuqests are handled in kernel, devicemodel only need to provide the
page.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The guest memory is allocated through hugetlb. Huge page fault is
triggered by writing a byte to the starting address for each huge page.
In hugetlb_fault(), The physical pages are allocated and *clear*.
So no need to erasing the memory again after hugetlb setup. This will
bring about 130ms (changes with platform) latency for each 1G memory.
Notice: this means we depends on kernel to erase the memory in huge page
fault!
Tracked-On: #7298
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Legacy VGA & VBE interface as a common interface is supported by
many legacy and modern OS. Many installer of OS distribution use
this interface to display the GUI of installer when setup a refresh
new installation on bare-metal. Besides, Windows OS always use this
interface to display it's BSOD, recovery mode & safe mode GUI. It
is need because Windows don't include virtio-gpu driver as their
in-box driver, VGA interface will be used before the virtio-gpu
driver been installed.
To be compatiable with the PCI bar layout of legacy VGA, the layout
is refined to meet with the requirement of legacy VGA and modern
virtio-gpu.
BAR0: VGA Framebuffer memory, 16 MB in size.
BAR2: MMIO Space
[0x0000~0x03ff] EDID data blob
[0x0400~0x041f] VGA ioports registers
[0x0500~0x0516] bochs display interface registers
[0x1000~0x17ff] Virtio common configuration registers
[0x1800~0x1fff] Virtio ISR state registers
[0x2000~0x2fff] Virtio device configuration registers
[0x3000~0x3fff] Virtio notification registers
BAR4: MSI/MSI-X
BAR5: Virtio port io
Tracked-On: #7210
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This reverts commit 6750d5a277.
the bug is root caused and fixed, so recovery the original patch.
Tracked-On: #6966
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
This reverts commit 811992ee2b.
There could be some conflict with current configure tool. will fix it
later.
Tracked-On: #6966
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
for CPU core partition VM, like RTVM, set PMU passthrough
flag for vtune/perf to run in guest VM.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
The current code does not always check the return value of function
ioctl called in ACRN userspace, and lack of error message printing
to help debug.
This code fixes it by checking the return value of ioctl, and adding
function errormsg to return a string describing of the error code.
Tracked-On: #7029
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This API depends on GET_PLATFORM_INFO ioctl command,
which will not be supported from ACRN HSM anymore.
This patch removes the definition of it and
also cleans related data structure.
Tracked-On: #6690
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Cpu affinty was set by pcpu id which can't be obtained
explictly by user. Use lapic id instead which can be easily
read from `/proc/cpuinfo` as `apicid`.
Tracked-On: #6690
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
fix memory leakage issue in function 'acrn_parse_cpu_affinity()',
memory pointed by 'cp' is not released before function return.
Tracked-On: #6919
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The UUID has several usages before:
1, For HV to identify the static VM configuration of post-launched VM.
2, Seed virtualization.
3, Slightly prevent launching malicous VM from SOS as lack of secure
boot.
The UUID is confused to user, user don't understand what it is. And user
don't know where to get/apply the UUID. The worst experience is user
can't launch any VMs w/o re-compile the hv. Everything needs to be
static decided in building phase.
Now we decide to remove UUID and split each usage. For 1st usage, use
vmname as the identifier of static VM configuration. For 2nd one, we
will use --vseed as the new parameter. For 3rd one, will pretect by
SOS's dm-verity.
This patch will remove the UUID parameter and support 1st&3rd usages
from DM part. For 2nd usage, another patch will be submitted later.
Tracked-On: #6685
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
When a platform reboots or shuts down, the contents of RAM are not immediately
lost but begins to decay. During this period, there is a short timeframe during
which an attacker can turn the platform back on to boot into a program that
dumps the contents of memory (e.g., cold boot attacks). Encryption keys and
other secrets can be easily compromised through this method.
We already erasing the guest memory data when the guest is shut down normally.
However, if the guest is shut down abnormally, the contents of RAM may still
there. This patch mitigate this kind reset attack for a DM launched VM by
erasing the guest memory data by the guest has been created.
Tracked-On: #6061
Signed-off-by: Li Fei1 <fei1.li@intel.com>
vm_config size can be calced by platform_info.sw.max_vms *
platform_info.sw.vm_config_size.
Change vm_get_config() to call IOCTL ACRN_IOCTL_GET_PLATFORM_INFO
twice, first to get platform_info, second to get the vm_configs
content.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ADD_HV_VDEV -> ACRN_IOCTL_CREATE_VDEV
IC_REMOVE_HV_VDEV -> ACRN_IOCTL_DESTROY_VDEV
struct acrn_emul_dev -> struct acrn_vdev
Also, move struct acrn_vdev to acrn_common.h as this structure is used
by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_MMIODEV -> ACRN_IOCTL_ASSIGN_MMIODEV
IC_DEASSIGN_MMIODEV -> ACRN_IOCTL_DEASSIGN_MMIODEV
struct acrn_mmiodev has slight change. Move struct acrn_mmiodev into
acrn_common.h because it is used by both DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
IC_ASSIGN_PCIDEV -> ACRN_IOCTL_ASSIGN_PCIDEV
IC_DEASSIGN_PCIDEV -> ACRN_IOCTL_DEASSIGN_PCIDEV
QUIRK_PTDEV -> ACRN_PTDEV_QUIRK_ASSIGN
struct acrn_assign_pcidev -> struct acrn_pcidev
Move struct acrn_pcidev into acrn_common.h because it is used by both
DM and HV.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
The hypervisor creates vCPUs for a User VM in VM creation interface. The
vm_create_vcpu() interface is not needed anymore.
Remove vm_create_vcpu() from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Interface version is not recommended in Linux kernel community. Please
check Documentation/driver-api/ioctl.rst for reasons.
Remove the unused API version check from acrn-dm.
Tracked-On: #6282
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Two utility functions are copied and adapted from hyerpervisor:
ffs64
bitmap_clear_nolock
Two public functions are provided for future use (such as for RTCTv2)
pcpuid_from_vcpuid
lapicid_from_pcpuid
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This allows users to retrieve and use the requested platform_info information from hypervisor
Tracked-On: #6020
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
ACRN didn't support dynamic memory allocation. SO it would reserve
a big page pool and use the GPA as index to get a page to do EPT
mapping. In order to save memory, we put high MMIO windows to [4G, 5G].
AFter we support dynamic page allocation for EPT mapping, we move
high MMIO windows to where it used to ([256G, 512G]) for 39 bits physical
address), we could move high memory to where is used to too ([4G, 4G +
size]).
Tracked-On: #5913
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
resize vm_config buffer from 16KB to 32KB, as 16KB
is not enough on EHL platform, which will result in
crash when accessing this memory.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This patch prepares vRTCT for post-RTVM instead of
pass-thru native RTCT:
- Configurations are based on Service VM native RTCT.
- Remap vLAPIC IDs in vRTCT.
- Remap base address of SW SRAM memory regions
from HPA to GPA.
- HPA base of Software SRAM shall be parsed from PTCT
instead of hardcoding.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch add function 'vm_get_config()' to get
configuration information for current VM from hypervisor.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
We don't reserve PCI MMIO in e820 Table, it's included in DSDT ACPI Table.
About 0xA0000 - 0x100000 entry, we don't have any ACPI Table touch this region.
So we could remove it too.
After this change, we could only pass the reserved e820 table which we must
reserve to OVMF. In this case, the OVMF could trust ACRN-DM and pass the
reserved e820 table to guest instead of dropping it.
This patch needs the corresponding modify in OVMF. Otherwise, the guest could
not boot.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Add IC_CREATE_DEVICE and IC_DESTROY_DEVICE ioctls to create and
destroy an emulated device in hypervisor
v3: change IC_CREATE_DEVICE and IC_DESTROY_DEVICE to IC_CREATE_HV_VDEV
and IC_DESTROY_HV_VDEV
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add two hypercalls to support MMIO device pass through.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
- re-arange the code to make static code analysis tool happy.
- If no valid conversion could be performed, a zero value is returned
(0L) from strtol(), so add a sanity check "isdigit(cp[0])" to ensure
that it won't unexpectedly parse CPU 0 if the string starts or ends
with the valid delimiters ',' or '-', for example:
-- cpu_affinity 1,
-- cpu_affinity ,1
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
add logs for vm state transition to help
analyze some problems.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
User has a chance to specify VCPU affinity through acrn-dm command line
argument. Examples of the command line:
3 PCPUs: 1/2/3
--cpu_affinity 1-3
5 PCPUs: 2/3/6/7/8
--cpu_affinity 2,3,6-8
8 PCPUs: 2/3/6/7/9/10/11/12
--cpu_affinity 2,3,6-7,9,10-12
The specified pCPUs must be included in the guest VM's statically
defined vm_config[].cpu_affinity_bitmap.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
If the guest is RTVM, dm process exit doesn't mean RTVM is
shutdown. Only shutdown_vm in hypervisor guarantee RTVM is
shutodwn. So we should avoid touch guest memory content
from DM if the guest is RTVM.
Tracked-On: #4428
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add assign/deassign PCI device ioctl APIs assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current design has the following problem:
gvt uses some pci bar regions,
but ACRN-DM isn't aware of these regions.
So ACRN-DM may allocate these regions for other pci devices,
which will result in other pci devices bar regions
overlap with gvt bar regions.
The new design is the following:
(1) ACRN-DM reads gvt bar regions
which are provided by physical gpu;
(2) ACRN-DM reserves gvt bar regions
v6 -> v7:
* use array to store reserved bar regions
* rename some struct and func
v5 -> v6:
* rename enable_gvt to gvt_enabled
* add a interface to reserve bar regions
* reserve gvt bar regions
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Now, we pre-define VM configuration statically in HV. So HV can create
vcpus instead of DM when VM create.
This patch get the created vcpu_num from HV. vm_create_vcpu can be
removed later if kernel can get vcpu_num correctly without
IC_CREATE_VCPU ioctl.
v4: Keep vm_create_vcpu in DM for compatbility. We might remove it when
kernel is ready.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
