Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The current code would cause infinite calls to vq_getchain()
because that:
- error check of vq_getchain() return value is missing.
- virtqueue misunderstand that there are avaliable descripters
even though the idx of avail ring is invalid.
This patch fixes it by checking validity of the return of
vq_getchain() and jump out of the loop for invalid return value.
This patch alse add validity check in judgment of avaliable
descriptor, and check if the diff between idx of avail ring and
the last idx is greater than size of this queue.
Tracked-On: #7038
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
With virtio polling mode enabled, a timer is running in the virtio
backend service. And the timer will also be triggered if its frondend
driver didn't do the device reset in shutdown. A freed virtio device
will be accessed in the polling timer handler.
Do the virtio reset() callback specifically to clear the polling timer
before the free.
Tracked-On: #6147
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface instead of printf directly.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch is to clean up assert from virtio-gpio
Tracked-On: #3252
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Replace strlen function with strnlen function in DM
Tracked-On: #3276
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
virtio_gpio_ops variable type is static,so use "+=" will let
the value keep increasing when acrn-dm reset.
Tracked-On: #3118
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When vm reset,the gpio line state is busy if we don't close the fd.
Tracked-On: #3028
Signed-off-by: fuyongjie <fuyongjie@vip.qq.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When UOS set failling irq type, gpio BE will only request GPIOEVENT_REQUEST_FAILLING_EDGE
event from native gpio driver which will cause the last_level value is always 0.
So last_level can't be used to check whether interrupt should be injected or not.
It is the same for rising irq type.
v2: refine commit message.
Tracked-On: #3010
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
Signed-off-by: fuyongjie <fuyongjie@neusoft.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
GPIO set/get value can be operated by accessing PIO space and the PIO
register definition for GPIO is in gpio_dm.h, frontend driver or ACPI
control methods can operate GPIO based on it.
GPIO mediator also defines ACPI control methods to support GPIO
operations, GPIO consumers can invoke PIO_GPIO_SET_VALUE/PIO_GPIO_GET_VALUE
in their own DSDT to set/get one GPIO value via ACPI control method.
v2: 1) Fix code style.
2) Use virtio configuration space callbacks to implement GPIO PIO operations
that replace pci_gpio_read/pci_gpio_write with virtio_cfgread/virtio_cfgwrite.
3) Return 0xFFFFFFFF as invalid result of PIO reading instead 0.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
print each IRQ descriptor interrupts number and all of IRQ descriptors
interrupts when UOS requests or releases a GPIO IRQ.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Support reading GPIO value when the GPIO switches to IRQ mode.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
GPIO IRQ controller emulation is used to handle level trigger and
edge trigger interrupts. Use GPIO IRQ virtqueue to handle IRQ chip
operations and GPIO event virtqueue to indicate IRQ source to UOS.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
add the GPIO IRQ definitions, and implement the GPIO IRQ
initialization and deinitialization.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are two virtqueues for irq, one for handling the operations of
front-end irq controller and the other for triggering the interrupt.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For virtio-based device, it needs to use virtio_base as the first member
otherwise, virtio_linkup will fail.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the backend completes a GPIO request, it returns a valid length
to ensure that response correct.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
if the gpio debug is enabled, print gpio mapping information about
virtual gpio and native gpio, also print virtio-gpio data, which shows
the gpio operations flow.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Implement gpio set/get value, direction input/output and set config operations.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
virtio framework implementation for virtio-based gpio virtualization.
virtio-based gpio uses one virtqueue to implement gpio operaions and
frontend gpio chip base and number are provided by virtio config.
Tracked-On: #2512
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
