Ivshmem hv-land solution emulates the ivshmem device in hypervisor
and the shared memory is reserved in the hypervisor's memory space.
And it can provide inter-vm communication for both pre-launched and
post-launched VMs.
This patch introduces the ivshmem hv-land solution including what
ivshmem hv-land is and how to use it.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
meta-acrn is a Yocto Project layer repo with recipes for building a
Service and User VM OS using Yocto Project. While the information there
is sparse, for the experienced YP developer is might be enough.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
minor_ver should be le 2 when major_ver == 2.
Tracked-On: #5276
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
A previous update changed "slave" to "secondary", but the code comments
were changed to use "client", so update the documentation to match.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
ACRN 2.1 supports two virtual boot modes, deprivilege boot mode and
direct boot mode. The deprivilege boot mode’s main purpose is to support
booting Clear Linux Service VM with UEFI service support, but this
brings scalability problems when porting ACRN to new Intel platforms.
For the 2.2 release, deprivilege mode is removed, and only direct boot
is supported, and with this we've removed support for Clear Linux as the
service VM, which impacts over 50 ACRN documents. This PR removes
documents we don't intend to update, and fixes broken links that would
occur from references to these deleted docs.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Replace white/black master/slave terms with alternatives. We're not
changing "master" when used in the context of GitHub branches. GitHub
advises they have a plan to help this transition. In the text body we
rever to the "master" branch as the "main" branch, but leave any urls or
code-block commands still using "master".
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Also clear Linux is no longer supported either as SOS or post-launched VM kernel.
- When it mentions clear Linux, mostly replaced by Ubuntu.
- remove all contents re/lated to "UEFI boot".
- remove the term de-privilege mode, and direct mode as well.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Add description of the new Hybrid RT (hybrid_rt) scenario to the "What is ACRN"
documentation.
Tracked-On: #5203
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add more explanations about the various ACRN modes of operation and how they are
used to construct more complex scenarios.
Tracked-On: #5196
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
- add a rule for pointer arithmetic operation
- add a rule about ABI conformance
- update GCC reference
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Some months were spelled out, others were abbreviated, making the list
of all release notes look a bit off.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add fixed security vulnerabilities for v2.1 release.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
build with XML file, "TARGET_DIR=xxx" does not work
Signed-off-by: guoqingxz <guoqingx.q.zhang@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
After change to IDV display solution for gvt-g, the kernel parameters:
i915.domain_plane_owners, i915.domain_plane_owners and i915.enable_pvmmio
related instruction is invalid and should be removed.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
As noticed in PR #5134 scenario configurations were moved out of the
hypervisor folder over to the misc folder (within the acrn-hypervisor
repo). Fix references and make them all consistent (referencing
misc/vm_configs)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Doc was merged but not included in the TOC (CI indicated a pass on that
PR even though doc build failed). This fixes that undetected error.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Besides PCI passthru, ACRN can support passthru of a set of page-aligned
MMIO resources. One example is to passthru a TPM device which includes
a set of page aligned MMIO resources.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Given the recent changes in the way ACRN configures RDT features,
this patch updates the documentation as well to provide clear
guidelines to the user.
Tracked-On: #5063
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Instead of linking to a specific doc on projectacrn.org, update to just
link to the area on projectacrn.org/#resources where the roadmap doc can
be found. Also remove mention of 2020 to keep it generic so it won't
need updating in 2021.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Propagated fix from other doxygen/breathe project to keep the
description found in the doxygen comments for the group being displayed
(in case there actually is a nice description given).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
ACRN 2.0 introduced Inter-VM communication feature by enabling the ivshmem v1.0 protocol/channel to communication
between VMs. To support the community's application Security Development Lifecycle (SDL), we provide a security hardening
guideline with some pointers to consider when using this channel by userspace application in case of additional security
requirments for Confidentiality, Integrity, or Authenticity.
Signed-off-by: Mostafa Naeem <mostafa.elsaid@intel.com>
While changes to documentation can be submitted directly as PRs, changes
to code must be first submitted for approval to the developer mailing
list. Update the contribution guidelines to talk about this.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add fixed issues and known issues in release note.
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Lists inside of a note are displayed properly now, thanks to #4966 so
let's put some back in.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix CSS style for lists inside a note. Previously the first list item
would overlap in the note heading box.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Attempt to replace all the variations of "pass-thru", "pass thru", "pass
through", and "pass-through" to be "passthrough" (except for doc labels
and in code or API uses)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The hv parameter could be configured in GRUB menu, currently we support
"uart=" parameter to override uart settings.
The patch also has modifications on tutorial of using_grub.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As a UX improvement, use a separate tab when opening links to external
sites (use the same tab for internal links). Also, use rel=noopener
attribute to improve security when linking to external sites.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the "Run Kata Containers on a Service VM" tutorial to use ACRN v2.0. It
also uses Ubuntu 20.04 as the baseline instead of Ubuntu 18.04. The Kata
Containers installation method is different as there are no pre-built binaries
for Ubuntu 20.04 yet, so using the 'kata-deploy' approach instead which is more
generic.
Changed link to slideshare.net for the referenced TCM presentation.
Tracked-On: #4944
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the table summarizing all ACRN scenario that are defined. The SDC
also offers the opportunity to run a Kata Containers VM and that was missing
from the description.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Improve usability of search results to promote tutorials and developer
guides, and demote API and KConfig material, with release notes at the
end.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the "Getting Started Guide for ACRN Industry Scenario with Ubuntu Service
VM" document. Specifically:
* Fix some code sequences that were incorrect (wrong file names/paths, etc.)
* Broke down some long lines to improve readibility
* Add some text/notes at places to better explain the process
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Refresh and update the "What is ACRN" document to reflect the latest changes.
Most notably, the scenario definitions have changed.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the 'ivshmem' document to clarify the existence of two similar
mechanisms to expose this device to User VMs. One is implemented in the ACRN
Device Model and another (future) is implemented in the hypervisor.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Fix broken download links to the Service VM and RTVM images that are provided
for ACRN release 1.6.1.
Tracked-On: #4918
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This commit adds the required dependencies for building the acrn-libvirt
from source. The missing packages were installed for building the ACRN
source code, it's no harm to `apt install` the packages if they are
already installed, but this commit make the build of acrn-libvirt
independently.
Tracked-On: #4910
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
A previous error (now fixed) in how the rst-columns CSS was written,
caused the default rst-columns to use 3 columns, when before (because of
the error) it being ignored.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Move the rt_industry GST into a tutorial for using Clear Linux as the
Service VM. Also drop a redirect to avoid 404 errors reference the
moved doc (redirect list maintained in conf.py)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update tutorial for running Kata containers on Ubuntu
Tracked-On: #4879
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
There are some subtle syntax errors in some documents that, while they
render OK (most of the time), are being caught by rstcheck (a
restructuredText linter). This PR fixes most of the issues encountered.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the note in the document to indicate the minimum version of gcc and
binutils required to succesfully compile ACRN.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Remove the zlib package from the list of build dependencies for Ubuntu.
Tracked-On: #4838
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Using ``.. rst-class:: rst-columns`` wasn't processed correctly because
of an error in the acrn-custom.css file. Fix that, update the
documentation guidelines, and make use of the multi-column display in
documents where the toctree created a long list. Now it will
appear in columns.
Also tweaked the toctree listing to use bold for the first-level items
(making a multi-column display look better, particularly when it has
subsections).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the OpenStack/libvirt tutorial with detailed instructions with
screen shots. Add patch file mention in the instructions to the docs
area so it's accessible.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Previous tutorial "Enable GPU Passthrough on the Skylake NUC"
is out of date, so delete it here.
v2 -> v1:
add attached file
Signed-off-by: Junming Liu <junming.liu@intel.com>
Add instruction to launch multiple post launched VMs.
Signed-off-by: lirui34 <ruix.li@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update mitigations for security vulnerabilities
for ACRN 1.6.1 release
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the "Run Zephyr as the User VM" document to add a note indicating a
serial port connection to the platform may be needed to see the Zephyr output
depending on the scenario used (SDC vs. industrial).
Tracked-On: #4553
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add a note to the "Run Celadon as the User VM" tutorial to indicate a serial
port connection to the platform (or change of the default config) may be needed
if the user uses a scenario other than SDC (the default one in the doc).
Tracked-On: #4554
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the documentation listing and describing all `acrn-dm` parameters as it
has gone out of sync with the actual implementation. Some parameters are missing
and others are now obsolete.
Tracked-On: #4732
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Convert UTF-8 characters (typically pasted from Word for smart quotes
and such) into equivalent ASCII characters.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As acrn-hypervisor Makefile rule changed, the doc need to be changed
accordingly.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The hypervisor configuration is integrated into scenario XML now,
update the elements description for hv section.
Some elements in launch XML are updated also.
Signed-off-by: Victor Sun <victor.sun@intel.com>
The VM configuration struct initialization method is slightly changed
recently, so reference code for cpu shaing need to be changed
accordingly.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Remove SDC2 scenario since usages under SDC2 could be supported by
INDUSTRY scenario which would support up to 7 post-launched VMs.
Signed-off-by: Victor Sun <victor.sun@intel.com>
The UP2 EFI firmware is a bit capricious and does not consistantly keep the
boot order after adding one using `efibootmgr`. There is no magic recipe (or
known reliable sequence) and hence we add a note warning the user that this
can happen, and when it does the only solution is to try modifying some more
the list of boot entries (inc. re-ordering them).
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add document to dynamically create scenario config and launch config,
dynamically add or delete VM settings in scenario and launch config
in web app of acrn configuration tool
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Fixed windows line endings, improved tip formatting, additional grammar
and content simplification edits.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The sphinx-tabs extension let's us create a document that can
dynamically display alternate material based on clicking a tab, as used
in the Zephyr getting started guide:
https://docs.zephyrproject.org/latest/getting_started/index.html
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the doc writing guidelines to include some new capabilities
(multi-column display, numbered instruction steps) and add more
information about writing tables.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
ACRN assumes certain state for the PCI devices w.r.t. resources assigned to them
before the platform BIOS hands control over to itself.
When the same BIOS is used with native OS boot, there should not be a need for
native kernel to re-program device BARs or bridge windows for bridge devices.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Stray non-ASCII characters can creep in when pasting from Word or Google
Docs, particularly for "smart" single and double quotes and non-breaking
spaces. Change these to their ASCII equivalents. Also fixed some very
long lines of text to wrap at 80-ish characters.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Using a root-level /404.html as a redirect to the /latest/404.html
causes the URL shown in the browser to change so you can't see what the
error-causing URL was. Instead of a redirect, copy the /latest/404.html
generated by Sphinx to /404.html and edited with a <base> tag that
specifies a base URL for all relative URLs on a page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Developers using google search can accidentally find older versions of
documents and lead to confusion. While we do maintain previous release
documentation on the site, we should have a preference for the latest
documentation when using external search engines. (Note the on-site
search always returns version-specific results.)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix display of 404 errors on mobile phones. Also added some additional
wording for reporting errors. (Last change, I hope :)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add styles for multi-column display, and for auto-numbered instruction
steps used in some other projects.
Also updating the used page width to 1100px following experience
improvements noted on other sites. Pages are hard to read when
displayed full-screen on really wide monitors.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Some additional tweaks to the publish script, image, and root-level
redirect to fix a redirect recursion problem.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a site-wide custom error page for broken references within the site.
Besides giving a better user experience, it's also easier to track
broken links to the site using google analytics (looking for hits to the
404.html page and noticing the referrer.
Note we only "publish" the custom 404.html when publishing the latest
documents (not for released versions) so we always get the latest
left-navigation menu when a 404 error occurs.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adding a big box for the glossary disturbed the home page layout and is
overkill for this one document. Adding the glossary to the left
navigation menu is sufficient.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
- Update quick setup script to support whl board.
- Change board to WHL NUC.
- Change the Service VM disk to NVMe.
- Update CL version to 32680 and ACRN tags info.
- Update CL and acrn tag versions for waag user vm tutorial.
Signed-off-by: lirui34 <ruix.li@intel.com>
One known issue :acrn-issue:`4560` during build ACRN HV.
Please refer to next section to get Docker Image from Docker Hub.
Signed-off-by: fangfang.shen <fangfang.shen@intel.com>
This patch updates CAT documentation as well as adds
documentation support for newly added MBA feature.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Introduce Split Device Model feature for ACRN. Now we only implement pass through
PCI(e) device of it.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
This is a workaround for the issue in efi-stub: If the EFI option is loaded to a memory range which is not all zero filled,
it's possible the garbage string appended to bootloader name string.
Which could make system can't boot.
Add an extra space to the EFI option to make sure space could be used to detect the end of bootloader name string.
Once the fixing patch is merged, we don't need this extra space.
But to make old ACRN work, we'd like to keep the space here.
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Delete Redhad virtio drive, only keep Oracle as reference.
Delete "inject driver into ISO" part, and update to the latest workable
method.
In a word, QA just need maintain one latest workable method in GSG for creating WaaG image.
Signed-off-by: ffshen <fangfang.shen@intel.com>
Fix links in documentation that have moved (e.g.,
clearlinux.org/documentation moved to docs.01.org/clearlinux/latest).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add ACRN Open Source Roadmap 2020 link to Intro/What is ACRN page
Add ACRN blog link to ACRN Intro page (under Roadmap)
Move ACRN Shell Commands to 'Tools' under Advanced Guides page
Signed-off-by: Deb Taylor <deb.taylor@intel.com>
One argument is missing for the function ptirq_alloc_entry.
This patch fixes the doc generation error.
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Fixed misspellings and rst formatting issues.
Added ptdev.h to the list of include file for doxygen
Tracked-On: #3882
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the "Using Ubuntu as the Service OS" tutorial to tweak the instructions
pertaining to the Grub bootloader configuration. Specifically, update to reflect
the content of '/etc/default/grub' in Ubuntu 18.04 and also make loading the
Service OS kernel the default.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the Kata and ACRN tutorial based on the latest SW components. Many
previous steps are no longer required and have been removed.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Project ACRN is targetting to keep the hypervisor's total number of lines of
code (LOC) below 40K. Update the "Build ACRN from Source" document to accurately
reflect that.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the "Using SDC Mode on the NUC" tutorial to use ACRN v1.5. The Clear
Linux used in this update is 32080 which is also the first release that includes
a Service VM (linux-iot-lts2018-sos) kernel that supports MACVLAN and MACVTAP,
both of which are need to run Kata Containers on ACRN.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Fix the name of the Docker Container image that is used to build the kernel
for an RTVM (Preempt-RT kernel) when that image was built by the user
him/herself.
Tracked-On: #4322
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
* Add more details about Kata Containers and ACRN in the introduction
* Adjust and correct some of the instructions
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
- commit 69152647 ("hv: Use virtual APIC IDs for Pre-launched VMs")
enables virtual APIC IDs for pre-launched VMs thus xapic_phys is no
longer needed to force guest xAPIC to work in physical destination mode.
- HVC is not available in logical partition mode and "console=hvc0" should
be removed from guest Linux bootargs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add a little information (at least pointers) as to how one can change the VM
(Pre-launched, Service or User) boot options.
Tracked-On: #3758
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update guidance to build ACRN from source,
as debug feature is disabled by default in Makefile.
'RELEASE' shall be 0 if debug feature is required.
Tracked-On: #4222
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Since commit 9e9e1f61, a new build dependency on the NUMA library has been
introduced. We therefore need to add the `devpkg-numactl` bundle to our
Dockerfile used to build the Clear Linux "ACRN builder" container image.
Tracked-On: #4175
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
"9e9e1f61 acrntrace: Add opt to specify the cpus where we should capture the data"
uses APIs of libnuma. So this patch adds dependency of libnuma in building-from-source.rst.
libnuma functions have been included in os-core-dev bundle of clearlinux.
Tracked-On: #4175
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
ptirq_msix_remap doesn't do the real remap, that's the vmsi_remap and vmsix_remap_entry
does. ptirq_msix_remap only did the preparation.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
ACRN does not support multiple PCI segments in its current form.
This patch adds support for mutliple PCI segments as a limitation
for ACRN in reference docs.
Tracked-On: #4134
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
1. Update acrn.efi name in acrn ootb scripts
2. Add licenses to acrn ootb scripts
3. Add format U disk step
4. Add execute permission to ootb script
5. Fix wrong img name
6. update clearlinux version to 31600
Signed-off-by: Lei, Lu <leix.lu@intel.com>
We've been keeping the doc version choice list trimmed as new doc
version releases are made, but the v1.0 version should remain. (Note
that the documents for all previously published versions are still
available on the server, but they were included in the menu choice).
This PR puts the 1.0 choice back in.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Mitigation for this vulnerability is applied in 1.4 release, update
related notes in adviosry.
Tracked-On: #4101
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
The default binary will not support 2 core/2 thread hardware from V1.3;
KBL NUC7i5DNH has serial port;
Add cores and threads for CPU of hardware listed;
Signed-off-by: Xie Zhengtian <zhengtian.xie@intel.com>
Cleaned up the presentation and formatting problems from the conversion
to ReST, along with English grammar and spelling edits.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
1. add guest secure boot with OVMF.
2. delete obsolete content.
3. SOS -> Service VM and UOS -> User VM.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
1. Some security features are added into ACRN HV memory management.
2. Dynamic memory allocation is removed. Instead, static memory page allocation is added.
3. The guest to host mapping is not static any more for Service OS after it begins running
since the Service OS support PCI BAR re-pregramming now.
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Change APL getting started guide to KBL getting started guide;
Merge some of the contents into preempt-rt getting started guide;
Move the modified kbl getting started guide to the behind of the configuration tutorials;
Fix issues for acrn_quick_setup.sh script.
Signed-off-by: lirui34 <ruix.li@intel.com>
Remove redundant copy of ovmf.fd firmware as the lunach script now
instructs the DM to user the OVMF.fd firmware directly from the rootfs.
Tracked-On: #3972
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
This commit updates the DM parameters reference document to reflect
the removal of the guest cpu number option '-c' implementation.
Tracked-On: #3989
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
updated this chapter based on latest master
some part still need update:
- vSBL need be replaced by OVMF after removed all vSBL stuff
Tracked-On: #3882
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
PR #3665 moved all the doc build artifacts into the _build folder and
updated scripts and Makefile to account for this, except missed a fix in
the script that checks for known issues. This patch fixes that but shows
we've got a bunch of issues that have not been being reported so we'll
need to fix those problems to resolve failing doc builds.
Also fixed process of the VERSION file in conf.py since the path to that
file was changed by PR #3665 as well and was raising an exeception that
was being masked.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
As reported in PR #3959, doc build errors were being masked by a script
error. This PR fixes a chunk of them.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
PR #3665 moved the doc build folder, so files referenced via directives
had an incorrect path (need to add an additional ../../ to the front of
relative paths that were referencing files outside of the doc folder).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix "duplicate label" error (name of a figure collided with the name of
a document). Also fixed very long lines, cleaned up some stray extra
spaces that were breaking up words, and some grammar issues.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Adds a new section in reference documentation that lists the
requirements from ACRN upon a processor to boot and function
successfully.
This patch is a starting point and can expect to add a lot
more requirements that would be a translation of
hypervisor/arch/x86/cpu_caps.c
Tracked-On: #3899
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move virtio-i2c doc from tutorials to developer-guilders/hld and add
entry for virtio-i2c in hld-virtio-devices
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
add VM state transition, and make this chapter into
part of hypervisor hld, the user level vm management
should be introduced in ACRN tools.
Tracked-On: #3882
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
1) removed the earlylog section as we have remove
the earlylog support from acrn hypervisor.
2) updated SOS ACRN Log Module section as the size
and base address of acrn log buffer are configured
by kernel option now instead of hardcoding.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
'rsync' is missing from the ACRN Builder Container (in 'doc/getting-started/Dockerfile').
Add it and also add the 'devpkg-graphviz' bundle specifically although it is
automatically included via the 'desktop-apps' (it does not use any additional
space and makes clearer that it is needed).
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
* Optimize the size of the Clear Linux container that can be used to build ACRN.
This patch reduces the size of the container from approx. 10.8GB down to about
3.8GB.
* Add tools required to build the ACRN documentation
* Add paragraph on how to build the ACRN documentation using Docker
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Move the "Building ACRN in Docker" guide to the "Try using ACRN" section to be
more prominently visible. Reference it from the main "Build ACRN from Source"
user guide.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Modify the documentation Makefile (doc/Makefile) and scripts to only modify and
create content inside the $BUILDDIR folder.
The folders that were created inside 'doc/' previously are now all created
inside '$BUILDDIR/rst'. The '.gitignore' file has also been updated accordingly.
Tracked-On: #3686
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. Update build the hypervisor with XML file command.
2. Add "cd hypervisor" before "make defconfig BOARD=nuc6cayh"
Signed-off-by: Lei, Lu <leix.lu@intel.com>
This tutorial is introducing how to build service vm, preempt_rt kernel and
industry scenario hypervisor; Update built kernel and launch the preempt_rt vm.
Signed-off-by: lirui34 <ruix.li@intel.com>
1. Update the Service OS VM default install disk to SATA, and Preempt-RT User
VM default install disk to NVMe.
2. Update the Launch Preempt-RT User VM setup.
Signed-off-by: Lei, Lu <leix.lu@intel.com>
This tutorial describes how to generate, deploy OOTB Service VM
RTVM image so that all of the users are able to use ACRN, boot
RTVM immediately after installation without any configuration or
modification.
Signed-off-by: lirui34 <ruix.li@intel.com>
Editorial tweaks to the "Real-Time (RT) Performance Analysis on ACRN" document,
mostly to improve readibility, no technical content change.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. Fix the broken link to dwonload UP2 Board BIOS
2. In Clear Linux 31030 the acrn.apl-up2.sbl name is changed to
acrn.apl-up2.sbl.sdc.32.out, so we need to update the creaet-up2-imgages.sh
3. Command "swupd verify --install -m" has been superseded, use "swupd
os-install -V" instead.
Signed-off-by: Lei, Lu <leix.lu@intel.com>
So far the patches are only suite for Celadon Android 9.
Need to specify the Android 9 repo branch to apply patches and
build Celadon image.
Signed-off-by: lirui34 <ruix.li@intel.com>
1. From Clear Linux 31030, we could use kernel-iot-lts2018-sos kernel
command line as Service OS kernel command line directly, so update
the setps and codes to set the Service OS kernel command line.
2. Command "swupd verfiy" and the flag "-m" is superseded, use "swupd
repair" and the flag "-V" instead
3. As UOS is launched by OVMF, the old steps and code to set up UOS does
not work on Clear Linux 31030, update its related steps and code.
4. Update install Clear Linux steps.
5. Fix some small issues.
Signed-off-by: Lei, Lu <leix.lu@intel.com>
Tweak the "vUART configuration" tutorial to fix a few typos and change some
formatting to improve its readability.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
* Update the launch scripts provided as examples on how to launch a Zephyr,
VxWorks or Windows User VM to directly use the 'OVMF.fd' bios file installed
by default in '/usr/share/acrn/bios/'
* Remove the OVMF.fd that was kept under 'doc/tutorials' (no longer needed)
* Adapt the tutorials to reflect this change
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Now the structures(run_context & ext_context) are defined
in vcpu.h,and they are used in the lower-layer modules(wakeup.S),
this patch move down the structures from vcpu.h to cpu.h
to avoid reversed dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN tag is ONLY specific to one Clear Linux version.
For the tutorials, we just need to make sure the validated version is functional.
Signed-off-by: lirui34 <ruix.li@intel.com>
new params: --pm_by_vuart is used to set power mananger by vuart
on ACRN; so add it to user guide.
Tracked-On: #3564
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Add the '--logger_setting' parameter information to the 'acrn-dm' parameter
document.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
An offline configure tool is designed to configure the BOARD and VM configurations.
Here is the tutorial to tell people how to use it.
Signed-off-by: lirui34 <ruix.li@intel.com>
Add 'zlib1g-dev' to the list of build tools and dependencies to be installed
in Debian in order to build the ACRN project.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
modify partition desc table of up2 board to make it consistent with
launch uos script.
Signed-off-by: Lei Lu <leix.lu@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
modernizr.min.js is no longer used by Sphinx's rtd theme and is causing
some browsers to have a noticable flash when pages are loaded. While we
can't easily remove it from the RTD theme, we can replace the script
with an empty file instead.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
While we internally call the "new" ACRN architecture 2.0, it could be
confusing to users since we also are calling the upcoming release v1.2
and there is no 2.0 release yet. Remove references to 2.0 in the
introduction.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Changing from just describing the supported hardware to a new hardware
support matrix based on the usage scenarios.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
1. The origin clearlinux version 29070 in this doucment example is not
workable with acrn latest code, update the clearlinux version.
2. Replace the sos_console_login.png with vm_console_login.png
Signed-off-by: Lei Lu <leix.lu@intel.com>
pci_dev_config in VM configure stores all the PCI devices for a VM. Besides PT
devices, there're other type devices, like virtual host bridge. So rename ptdev
to pci_dev for these configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
PR #3516 was submitted during a documentation reorganization and
resulted in merge conflicts with files that no longer exist. We closed
that PR and opened this one with those changes applied to the right
files.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update merged PR #3463 with format and wording improvements.
(Not linked yet into the document navigation)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix some wording, table formatting, and links to issues and commits from
the original PR #3515
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the ACRN logo size to remove specifics in the CSS. (Grid images
should be ~100px high for the grid.)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The ACRN icon on the new graphical home page looked fine with firefox,
edge, and chrome browsers, but not on IE. This PR fixes that
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Home page "button" links needed to be manually updated (because of the
raw html usage) after content around.
Move partition mode docs from try to develop persona pages.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A few more tweaks to the site navigation since we moved the content back
to its original folder structure.
Remove the temporary "doc reorg in progress" banner.
Add reference to hardware in the "try" section.
Add link to the documentation home page in left nav pane.
Add additional redirects to handle external links to moved content.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Changing the folder structure will cause too many broken links for
external references (from other sites). So, let's put the content back
where it was before the reorg, and instead use the new persona-based
navigation to point to documents in the original locations.
Also, introduce redirects for some documents that no longer exits.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Take the existing ACRN technical documentation and reorganize its
presentation to be persona and use-case based, in preparation for adding
new scenario/use-case based architecture introduction and getting
started documents.
Introduce a more graphical home page and theme color tweaks.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Change WaaG launch script to the default ``launch_win.sh``,
and also provide one OVMF.fd binary in order to launch WaaG.
Change SOS / UOS to Service VM / Guest VM.
Signed-off-by: lirui34 <ruix.li@intel.com>
PR #3483 cleaned up the project root folder and moved stuff that was in
/tools into a new /misc folder. There were a few references to
the old /tools folder missed in that update, addressed in this PR.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SOS bootargs is specified in vm_configurations.h in different scenarios.
The files in devicemodel/samples/<board>/sos_bootargs_*.txt are removed.
remove deprecated sos_bootargs in create-up2-images.sh
Tracked-On: #3443
Signed-off-by: Lei Lu <leix.lu@intel.com>
Neither ACRN tag nor Clear Linux version is specified in some tutorials.
Declare those information for those tutorials.
Signed-off-by: lirui34 <ruix.li@intel.com>
This tutorial will describe steps to sign binaries of
a Clear Linux image that allows user to launch VM
throught the secure boot enabled OVMF.
Signed-off-by: lirui34 <ruix.li@intel.com>
Update batch script documentation and add reference to source of
material. Also some grammar cleanup in a few places.
Include an updated install_by_vga_gsg.tar.gz with an updated script with
copyright/licensing added.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In the current design guidlines, it is not clear about
how to check application constraints and how to record
them.
Add description about it is optional to do error checking
for application constraints during hypversisor boot time;
Add reference about how to record design assumptions.
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
Update the /latest/ (master) version of the docs to provide the menu
choice for the v1.1 release.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Modify 'launch_UOS.sh' to 'launch_uos.sh' and provide an example for
the script which is support '-C' option.
Signed-off-by: ruix.li <ruix.li@intel.com>
Clear Linux changed from systemd-networkd to NetworkManager as default
"network manager", We need to install "systemd-networkd-autostart"
bundle to enable systemd-networkd to create ACRN network bridges and Tap
devices.
Signed-off-by: Lei Lu <leix.lu@intel.com>
The doxygen-collected API information about function preconditions has a
uninspired title of "pre". This change tweaks that to be
"preconditions" in the generated HTML output by editing the generated
xml output before it is processed by Sphinx/Breathe.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The ACRN primer has be replaced by an updated set of ACRN High-Level Design
documents. Remove the primer (and images), and replace a link to the
graphics mediation section (from API documentation) to the corresponding
section in the APL GVT-g document.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Rather than have the developer make edits, it was easier to merge
PR #3246 and submit a new PR with improvements.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
- add an introduction part for building ACRN hypervisor
- clarify why ACRN hypervisor does not support one binary
for all platforms
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
The multiboot module string will be used to identify the usage of current
module, it must exactly match with "kernel_mod_tag" which configured in
VM configurations files;
Signed-off-by: Victor Sun <victor.sun@intel.com>
The 'reboot' command from the ACRN shell has been removed. Remove the
corresponding documentation from the ACRN Shell user guide.
Tracked-On: #3210
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Clean vmcfg from doc/developer-guides/hld/hld-devicemodel.rst
Tracked-On: #3192
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Sphinx 2.0 reports some "expected errors" differently, so add the new
message patterns to our known-errors scanning.
Also, the kerneldoc tool has a problem with sphinx 2.0, but a fix was
available.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch removes hard-coded interfaces in .rst files and
refers to the definition via doxygen style comments.
This patch mainly focus on Hypervisor part.
Other parts will be covered in seperate patches.
Tracked-On: #1595
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Using vSBL is only supported on Apollo Lake (APL) platforms at the
present. It cannot be used on other platforms supported by ACRN such as
KBL. Make this explicit with an additional note in the documentation.
Tracked-On: #2798
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add the <vm_id> parameter to the documentation for the ACRN shell
"vm_console" command.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add the description of option 'b' to indicate the boot device including
the bootable image.
Tracked-On: #1917
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
APL NUC Getting started guide has some obsolete information (such as
saying the user had to build ACRN as part of the installation process
and changed instructions because the Clear Linux installer changed),
along with some spelling and grammar issues.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch adds the steps required to use the newly
introduced blkrescan feature for Virtio-blk device.
Tracked-On: #3051
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
An instruction is needed from gsg so that user could know where
to get the script and also how to use it to setup SOS, UOS automatically.
Signed-off-by: ruix.li <ruix.li@intel.com>
Update the architectural diagram in the "Using PREEMPT_RT-Linux for
real-time UOS" tutorial to reflect the new name given to that type of
VM, i.e. from "Privileged VM" to "RTVM".
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the instructions on how to build ACRN on Ubuntu 16.04,
specifically:
* Add 'pkg-config' package
* Upgrade 'binutils' to 2.27
Note: there is still an issue with regards to the GPIO header
(linux/gpio.h) which needs to be resolved.
Tracked-On: #2737
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Change shell command 'sos_console' to 'vm_console' as it is not only
used to switch console to SOS.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
This patch renames rules ID to reflect the language, in order
to support multiple programming languages.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
The name NORMAL_VM does not clearly reflect the attribute that these VMs
are launched "later". POST_LAUNCHED_VM is closer to the fact
that these VMs are launched "later" by one of the VMs launched by ACRN.
Tracked-On: #3034
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When in fully APICv mode, we enable VID. All pending delivery interrupts
will inject to VM before VM entry. So there is no pending delivery interrupt.
However, if VID is not enabled, we can only inject pending delivery interrupt
one by one. So we always need to do this check.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
apicv_advanced_inject_intr is used if APICv fully features are supported,
it uses PIR to inject interrupt. otherwise, apicv_basic_inject_intr is used.
it will use VMCS INTR INFO field to inject irq.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Currently vpid is not released in reset_vcpu() hence the vpid resource
could be exhausted easily if guests are re-launched.
This patch assigns vpid according to the fixed mapping of runtime vm_id
and vcpu_id to guarantee the uniqueness of vpid.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In the presence of SOS, ACRN uses fallback_iommu_domain which is the same
used by SOS, to assign domain to devices during ACRN init. Also it uses
fallback_iommu_domain when DM requests ACRN to remove device from UOS domain.
This patch changes the design of assign/remove_iommu_device to avoid the
concept of fallback_iommu_domain and its setup. This way ACRN can commonly
treat pre-launched VMs bringup w.r.t. IOMMU domain creation.
Tracked-On: #2965
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Enhance "vm_list" command in shell to Show VM UUID;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Add text to the script usages and inform people to run script with root access.
2. Add logic to determine the right ESP.
3. remove unset proxy line.
4. Add reboot operation after upgrade SOS.
5. Handle multiple efi partition while it's detected.
Co-Authored-By: lirui34 <48583653+lirui34@users.noreply.github.com>
When 0.8 documents are published, we create a link to them from the
master branch where the /latest version of documentation is found.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the documentation, and associated scripts to reflect the fact
that the TAP device used by 'acrn-dm' no longer use the "acrn_" prefix.
Tracked-On: #2509
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the "ACRN Debugging Tools" tutorial:
* Remove sections on how to build and install the hypervisor, refer to the
corresponding user guides instead
* Simplify the flow for checking loglevel (console and mem)
* Add a little text to improve readability
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add a new debugging tutorial and update the acrn_shell documentation
with additional details.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch updates the rules category in coding guidelines.
Move some rules in 'Statements' part to 'Expressions' part and
'Functions' part, which is more reasonable.
No functional change is involved.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Few tweaks to the "User Guides" and "ACRN Device Model parameters" docs:
- Enhance the help text for the '--rtvm' option description
- Correct the flag name to IO_COMPLETION_POLLING
- Use double-backticks instead of quotes in various places
- Explicitly list all docs in 'index.rst' to enforce special ordering
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Move the doc version selector menu higher on the left nav to make it
more visible (from its prior bottom of the nav menu)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A few changes to the documents that describe kernel command-line parameters
relevant to ACRN (SOS and UOS):
- Merge two documents into one (with sections)
- Move to the "User Guides" (from the "Developer Guides")
- Update order in the list to make it consistent across sections
- Add missing parameters to the overview list
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
- Remove QemuFwCfg/QemuFwCfgS3Lib
- Use ACRN E820 map to query system memory size
- Support 64-bit PCI host aperture via ACRN E820
- Remove debug code in release build
- Take out unnecessary OVMF drivers
- Revert "Enable MP support"
- Use CPUID 0x40000010 to determine tsc frequency
Tracked-On: #2868
Signed-off-by: Peter Fang <peter.fang@intel.com>
Update the instructions on how to increase the size of a UOS disk image so that
the entire operation can be performed on the development host. This has the
advantage that it can be done completely offline (the UOS must be powered off
in fact) and no extra tools need to be installed in the UOS to do this.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
For open source, just need to refer FuSa standard instead
of listing concrete fulfillment matrix.
Add related FuSa standard reference and remove related
fulfillment matrix.
V1-->V2:
Make reference more clear according to David'comments
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
This patch add tutorial about using zephyr as guest.
Tracked-On: #2713
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
---
v3 -> v4:
- Addressed two minor comments from David
v2 -> v3:
- Detail section `Build Zephyr`
- Add missing sudo
- Automatically boot zephyr
- Other grammar, phrasing fix
v1 -> v2:
- NUC7i5DNH -> NUC7i5DNHE.
- Add note about doc to build acrn supported zephyr image.
- Refine section `Boot Zephyr as User OS`.
- Some minor fix.
Add a tutorial on how to increase the disk size of a User OS (UOS)
based on Clear Linux. The tutorial is largely inspired from Clear Linux
tutorial and refers to it. It mostly explains how to resize the .img
file using the 'qemu-img' tool since ACRN does not have any dedicated
tool for manipulating virtual disk image files.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Co-Authored-By: David B. Kinder <david.b.kinder@intel.com>
Add 'rdmsr' and 'wrmsr' to the "ACRN Shell Commands" documentation. Both are
already described via the interactive help command but not (yet) included in our
on-line documentation.
Tracked-On: #2684
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Fix some stray UTF-8 punctuation and symbol characters, unnecessary
trademark symbols, and some misspellings missed during regular reviews.
Tracked-On: #2712
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Original design is to map trusty's memory to 512G~513G, but GR-MRB platform
does not support memory mapping bigger than 512G. So final implementation
is mapping trusty's memory to 511G~512G.
This patch update the documentation with latest implementation.
Tracked-On: #2742
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Update the "ACRN Shell Commands" user guide in the following aspects:
* Improve the text (help) for some commands to improve readability
* Remove commands that are no longer available
* Add the 'vioapic' command that was missing
Note: this patch does not add a description for both the "[rd|wr]msr"
commands.
Tracked-On: #2684
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Co-Authored-By: David B. Kinder <david.b.kinder@intel.com>
The board name for building images for UP2 has been changed from 'up2' to 'apl-up2' by the commit #f9b5e21.
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
-- change 'tsc_khz' to static
-- move these APIs from rtl.h to timer.c
us_to_ticks()
ticks_to_us()
ticks_to_ms()
rdtsc()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Convert and edit IOC virtualization doc to add to ACRN documentation.
Add a note that IOC virtualization is not supported on the NUC or UP2
platforms.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Rename vlapic_post_intr to apicv_post_intr and move it to internal function
since it's only used in vlaic.c.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Update doc to remove trailing spaces on lines, wrap long lines, add
formatting missed during regular review.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the using_partition_mode_on_up2.rst to accormodate the latest
configuration method for up2 partition mode.
Signed-off-by: Victor Sun <victor.sun@intel.com>
merge include/arch/x86/irq.h and include/common/irq.h
--> include/arch/x86/irq.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
- Remove some i915 options that are obsolete and irrelevant for the
Service OS kernel
- Update the various tutorials that also used these obsolete parameters
Tracked-On: #2518
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
* Update kernel versions to the latest (to reflect the new 'release'
number used in the 'iot-lts2018' kernel
* Add a one-line command to insert the PARTUUID into the acrn.conf
file (without copying it all manually)
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch is a modified one. It removes the usage
of acrn_vm struct from inside vtd.c.
It also puts struct iommu_domain inside vtd.h,
from vtd.c.
It modifies the signature of init_iommu_domain
in order to remove dependency on acrn_vm from
inside vtd.c.
Incorporated comments from Jason and Eddie.
Changed the name of sos_vm_domain to
fallback_iommu_domain
Removed any reference of sos_vm from vtd.[c|h]
files, including comments.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
- move functions related vmexit from `guest.h` to `vmexit.h`
- move functions related msr from `guest.h` to `msr.h`
- move functions related vm_sw_loader from `guest.h` to `vm.h`
- move function `vmx_vmrun` from `guest.h` to `vcpu.h`
- move MACROs related to vcpu from `guest.h` to `vcpu.h`
- move MACRO `E820_MAX_ENTRIES` from `guest.h` to `e820.h`
- move MACROs related to irq from `guest.h` to `irq.h`
- rename `guest.h` to `guest_memory.h`
Tracked-On: #2503
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_deliver_intr to vlapic_receive_intr: ioapic/msi device
deliver an interrupt to lapic.
Rename vlapic_pending_intr to vlapic_find_deliverable_intr: find a
deliverable interrupt which pending in irr and its priority large than ppr.
Rename vlapic_intr_accepted to vlapic_get_deliverable_intr: get the deliverable
interrupt from irr and set it in isr (which also raise ppr update)
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add a caption to the figure describing the Real-Time Linux VM running
on ACRN. Without this text, the HTML output does not add the Figure
number below it. That figure number is still used in the paragraph
making it hard for the reader to understand which figure is really
referenced (except by clicking on the hyperlink)
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Using term of VM0 would mislead to a VM with VM id 0 easily, whereas
VM id 0 could be used for any PRE_LAUNCHED_VM. So replace VM0 with
SOS_VM.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Proper use of the Clear Linux name is with a noun, specifically "OS".
Also fixed some grammar edits along the way.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
- added description of lapic pt feature based on vlapic in HLD virt-interrupt part;
- updated the doc to include description of new acrn-dm option "--lapic_pt".
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- add ept.h, and move ept related api declaration
from mmu.h to ept.h
-- move lookup_address()declaration from mmu.h to pgtable.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move the following files to dm folder
renamed: include/arch/x86/guest/vioapic.h -> include/dm/vioapic.h
renamed: include/arch/x86/guest/vpic.h -> include/dm/vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Versions of kconfiglib lower than 10.2 cannot build the documentation
correctly. The minimum version required is >=10.2. This patch updates
the 'requirements.txt' accordingly.
Tracked-On: #2429
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Start a new FAQ document with questions we're often being asked on
support channels. We'll expand this list over time, and as the number
of questions grow, we'll organize them as appropriate.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add a tutorial explaining how to set up a demo using AGL as UOSes as
used in a CES automotive demo.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This is the following patch after removing pending_pre_work, it make sure
all io emulation is done on its own cpu.
For hv emulated request, it follows the steps:
hv_emulate_pio->emulate_pio_complete
hv_emulate_mmio->emulate_mmio_complete
For dm emulated request, it follows the steps:
acrn_insert_request->dm_emulate_io_complete
while in acrn_insert_request, it could trigger scheduling out then resume by
hcall_notify_ioreq_finish, or busy wait for ioreq completion if polling mode
is enabled.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move this api from ept.c to io_emul.c to avoid
reverse dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
move this api from io_emul.c to vm.c to avoid reverse
dependency
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
1. move the CR related code from vmcs/vcpu to vCR source files.
2. also add virtual_cr.h to acrn.doxyfile to avoid doc failure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Update developer docs with a new GVT-g kernel options document. Update
existing docs with referenced labels.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The couple of lines highlighted in the launch_uos.sh script are off
since the latest modifications made to that script. Fix them both
to highlight the correct script lines that require attention.
Tracked-On: #2270
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Document a community reference release for the Skylake NUC with GPU
passthrough as a one-time snapshot release, not supported or
maintained. Includes a tar patch file.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix misspellings missed during regular reviews, and remove trailing
white space and Windows \r at end of lines.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
different serial devices could be used on different boards.
"vuart=ttySn@irqN" is used to avoid vuart's irq conflict
with SOS passthrough devices.
on UEFI platform, if ttyS1 used for debug uart, and its IRQ
on native OS is 5, you'd better set "vuart=ttyS1@irq5"; also
for its SOS bootargs in acrn.conf, you need set "console=ttyS1"
to match its vuart setting.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
This patch introduces an initial draft of ACRN coding guidelines.
We will update this document gradually to support ACRN achieve
MISRA-C compliance.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Coding guidelines have examples for compliant and non-compliant code,
but they look the same when rendered as HTML. Add a CSS style for
non-compliant-code examples with a red-tinted background.
Usage is:
```
.. rst-class:: non-compliant-code
.. code-block:: c
a=b=c=0;
```
or, for example:
```
.. rst-class:: non-compliant-code
Here's an example of non-compliant code::
a=b=c=0;
```
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Split the build instructions, and the hypervisor configuration instructions
into its own separate document.
Tracked-On: #2154
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
