This patch can fetch the thermal lvt irq and propagate
it to VM.
At this stage we support the case that there is only one VM
governing thermal. And we pass the hardware thermal irq to this VM.
First, we register the handler for thermal lvt interrupt, its irq
vector is THERMAL_VECTOR and the handler is thermal_irq_handler().
Then, when a thermal irq occurs, it flags the SOFTIRQ_THERMAL bit
of softirq_pending, This bit triggers the thermal_softirq() function.
And this function will inject the virtual thermal irq to VM.
Tracked-On: #8595
Signed-off-by: Zhangwei6 <wei6.zhang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
In this phase, we only use one VM to control thermal.
So we make thermal MSRs readable and writable by this VM.
This VM is flagged with GUEST_FLAG_VTM, and can
read/write thermal MSRs.
For the VMs not flagged with GUEST_FLAG_VTM,
can only read these thermal MSRs to get current status.
Tracked-On: #8595
Signed-off-by: Zhangwei6 <wei6.zhang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
When all vCPU threads on one pCPU are put to sleep (e.g., when all
guests execute HLT), hv would schedule to idle thread. Currently the
idle thread executes PAUSE which does not enter any c-state and consumes
a lot of power. This patch is to support HLT in the idle thread.
When we switch to HLT, we have to make sure events that would wake a
vCPU must also be able to wake the pCPU. Those events are either
generated by local interrupt or issued by other pCPUs followed by an
ipi kick.
Each of them have an interrupt involved, so they are also able to wake
the halted pCPU. Except when the pCPU has just scheduled to idle thread
but not yet halted, interrupts could be missed.
sleep-------schedule to idle------IRQ ON---HLT--(kick missed)
^
wake---kick|
This areas should be protected. This is done by a safe halt
mechanism leveraging STI instruction’s delay effect (same as Linux).
vCPUs with lapic_pt or hv with CONFIG_KEEP_IRQ_DISABLED=y does not allow
interrupts in root mode, so they could never wake from HLT (INIT kick
does not wake HLT in root mode either). They should continue using PAUSE
in idle.
Tracked-On: #8507
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
The movdqu instruction moves unaligned double quadword (128 bit)
contained in XMM registers.
This patch uses pointers as input parameters of the function
write_xmm_0_2() to get 128-bit value from 64-bit array for each XMM
register.
Tracked-On: #7380
Reviewed-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Jiang, Yanting <yanting.jiang@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The coding guideline rule C-FN-16 requires that 'Mixed-use of
C code and assembly code in a single function shall not be allowed',
this patch wraps inline assembly to inline functions.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
v1-->v2:
use inline functions for read/write XMM registers
This patch adds an option CONFIG_KEEP_IRQ_DISABLED to hv (default n) and
config-tool so that when this option is 'y', all interrupts in hv root
mode will be permanently disabled.
With this option to be 'y', all interrupts received in root mode will be
handled in external interrupt vmexit after next VM entry. The postpone
latency is negligible. This new configuration is a requirement from x86
TEE's secure/non-secure interrupt flow support. Many race conditions can be
avoided when keeping IRQ off.
v5:
Rename CONFIG_ACRN_KEEP_IRQ_DISABLED to CONFIG_KEEP_IRQ_DISABLED
v4:
Change CPU_IRQ_ENABLE/DISABLE to
CPU_IRQ_ENABLE_ON_CONFIG/DISABLE_ON_CONFIG and guard them using
CONFIG_ACRN_KEEP_IRQ_DISABLED
v3:
CONFIG_ACRN_DISABLE_INTERRUPT -> CONFIG_ACRN_KEEP_IRQ_DISABLED
Add more comment in commit message
Tracked-On: #6571
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Commit cbf3825 "hv: Pass-through IA32_TSC_AUX MSR to L1 guest"
lets guest own the physical MSR IA32_TSC_AUX and does not handle this MSR
in the hypervisor.
If multiple vCPUs share the same pCPU, when one vCPU reads MSR IA32_TSC_AUX,
it may get the value set by other vCPUs.
To fix this issue, this patch does:
- initialize the MSR content to 0 for the given vCPU, which is consistent with
the value specified in SDM Vol3 "Table 9-1. IA-32 and Intel 64 Processor
States Following Power-up, Reset, or INIT"
- save/restore the MSR content for the given vCPU during context switch
v1 -> v2:
* According to Table 9-1, the content of IA32_TSC_AUX MSR is unchanged
following INIT, v2 updates the initialization logic so that the content for
vCPU is consistent with SDM.
Tracked-On: #6799
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use an unused MSR on host to save ACRN pcpu ID and avoid saving and
restoring TSC AUX MSR on VMX transitions.
Tracked-On: #6289
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
According to VMXON Instruction Reference, do the following checks in the
virtual hardware environment: vCPU CPL, guest CR0, CR4, revision ID
in VMXON region, etc.
Currently ACRN doesn't support 32-bit L1 hypervisor, and injects an #UD
exception if L1 hypervisor is not running in 64-bit mode.
Tracked-On: #5923
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This patch emulates VMXON instruction. Basically checks some
prerequisites to enable VMX operation on L1 guest (next patch), and
prepares some virtual hardware environment in L0.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Move Cache/TLB arch specific parts into cpu.h
After this change, we should not expose arch specific parts out from mmu.h
Tracked-On: #5830
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
