Initialize the VM's time_delta to provide a consistent time offset for
guests, and properly initialize vcpu timer-related CSRs (htimedelta and
vstimecmp) to enable guest timer virtualization.
Changes:
- Add time_delta field to vm_arch structure to track VM time offset
- Initialize time_delta to -cpu_ticks() at VM creation, making
guest time start from 0
- Save/restore htimedelta CSR in vcpu load/unload paths
- Initialize vcpu's htimedelta from VM's time_delta
- Reset vstimecmp to invalid value (0xffffffffffffffff) on vcpu reset
- Add SSTC (Sstc extension) capability check
Tracked-On: #8851
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Replace SBI passthrough with proper virtualization of base extension
queries. For the Service VM, forward actual machine vendor/arch/impl
IDs from the underlying SBI. For guest VMs, provide dummy ACRN-specific
IDs to maintain isolation.
Changes:
- Return vSBI spec version 2.0 for GET_SPEC_VERSION
- Return ACRN implementation ID (55) and version for GET_IMP_ID/GET_IMP_VERSION
- Forward real mvendorid/marchid/mimpid to Service VM
- Provide dummy vendor/arch/impl IDs (0/0/0) to guest VMs
- Store machine IDs in vm_arch structure during VM initialization
- Remove unnecessary SBI passthrough for base extension queries
This provides better isolation and control over the virtual SBI
interface exposed to guests.
Tracked-On: #8851
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Add wrapper functions to query machine vendor ID (mvendorid),
architecture ID (marchid), and implementation ID (mimpid) through
the SBI base extension.
These IDs identify the RISC-V processor vendor, microarchitecture,
and specific implementation respectively. The hypervisor needs to
retrieve these values from the underlying SBI firmware to forward
them to the Service VM via vSBI, allowing the Service VM to see
the actual hardware characteristics.
Tracked-On: #8851
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Add virtual interrupt injection infrastructure for RISC-V hypervisor.
Implement vcpu_set_intr() and vcpu_clear_intr() to manage virtual
interrupt pending state by updating irqs_pending bitmap.
Add vcpu_inject_pending_intr() to inject pending interrupts into
VS-mode by updating HVIP CSR with atomic operations.
Tracked-On: #8844
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Add virtual exception handling infrastructure for RISC-V hypervisor
and enables proper virtualization of RISC-V exceptions by allowing
the hypervisor to inject exceptions into guest VS-mode.
- Implement vcpu_set_trap() to inject traps to VS-mode
- Implement vcpu_queue_exception() to queue exceptions for vCPU injection
- Process pending exception requests in riscv_process_vcpu_requests()
v1->v2:
change vcpu_redirect_trap -> vcpu_set_trap
Tracked-On: #8844
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Currently dbcn outputs directly to console. Outputs to ACRN
shell vm_console when other dependencies are ready.
Tracked-On: #8841
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Initialize Service VM vFDT by reserving hypervisor and pre-launched VM
memory regions.
The vFDT is copied to Service VM to the place just before the kernel
load address, and this needs to be fixed later when MMU module is
implemented.
Tracked-On: #8841
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
This patch adds ACRN-side APIs that uses libfdt to manupulate
FDT. This patch implements two APIs: read physical memory range
(assuming it is one continous physical range), and read reserved
memory ranges (multiple reserved memory ranges may present).
Tracked-On: #8841
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Original interrupt context save/restore routine saves to/restore from
per-cpu stack. This commit modifies it to support saving to/restoring
from address pointed to by sscratch register.
When sscratch is 0, the assembly is functionally equivalent to the
old version (save to/restore from per-cpu stack)
When sscratch is not 0, the assembly saves to/restores from the place
that sscratch points to.
hstatus is also added to the trap frame as this affects the virtual
mode the trap returns to.
Tracked-On: #8841
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Unlike x86 which explicitly distinguishes guest traps and host traps (VM
exits vs. IDT trap gates), risc-v unifies them to a single trap gate
with bits in multiple CSRs representing the privilege mode before the
trap. This commit follows this design.
Due to this change the arch_vcpu_thread in risc-v was basically
abandoned, and used only as a first-time entry point to guest, with the
rest of the original x86 arch_vcpu_thread being re-implemented following
above single-entry design.
Save/restore routine is also being re-implemented to account for
both hs-mode traps and v-mode traps. sscratch is used to mark the place
where the context is being saved to/restored from. When sscratch is
zero at the time of the trap, the context is saved into host stack.
When sscratch is non-zero, the context is saved to vcpu->arch.regs
(similar for restore).
Tracked-On: #8841
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
This patch integrates RISC-V with the common IRQ framework:
- Register software and timer interrupt handlers via request_irq().
- Refine dispatch_interrupt() to handle interrupts via do_irq().
Tracked-On: #8845
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Move NR_IRQS from the common header to arch-specific headers since its
value differs between architectures.
- On x86, it is 256.
- On RISC-V, it includes both CPU interrupts and external interrupts
(from PLIC, APLIC, etc.).
Tracked-On: #8845
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Move the declarations of arch-specific IRQ functions from their
arch-specific headers into the common header file.
Also rename these functions from xxx_arch() to arch_xxx() for better
naming consistency across architectures.
This change follows the style defined for multi-arch development.
Tracked-On: #8845
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
This patch fixes two bugs. The reason for writing them
into one commit is that they are related and the fixes
change the same places.
The first bug:
The size of struct stack_frame is 0x78, not 0x80, but
the save/restore assembly routine allocates/deallocates
the size of stack frame by 0x80.
The vcpu thread stack is initialized by allocating
sizeof(struct stack_frame) from the top of the stack
and put initial values there (arch_build_stack_frame).
The vcpu thread stack will underflow at the first
time this thread gets scheduled. So the fix is to change
the 0x80 to 0x78 in save/restore routine.
The second bug:
Save/restore routine needs to capture sstatus, as different
threads might have different interrupt enabling settings.
For example, vcpu threads always get scheduled out when the
interrupts are disabled, but idle thread needs to have the
interrupts enabled. So sstatus needs to be saved/restored.
The fix is to add a new member sstatus in struct stack_frame.
Adding a new member in struct stack_frame boost the size
of struct stack_frame to 0x80, which in this case the fix
of the first bug is no longer needed.
Tracked-On: #8838
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
There are two reasons to use inline functions and numbered-CSR
instead of simply string concat.
1, With old style, CSR names have to be written in lower cases
and cannot prefix anything. This sometimes causes confusion with
variables. For example, csr_write(sstatus, sstatus). Changing to
inline function with MACROs can reduce confusion:
csr_write(CSR_SSTATUS, sstatus)
2, Using number macros allows us to manage CSRs in a more organized
way. We can now put CSR names in variables or arrays and access them
using variables instead of just string names.
Tracked-On: #8838
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Adds csr read/write/set/clear/read_set/read_clear/swap utilities.
Also adds definitions for CSRs.
Tracked-On: #8838
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Pre-launched VM needs to load pre-compiled FDT binary (which is the same
when it needs pre-compiled ACPI binary).
Tracked-On: #8838
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Just as we accept pre-compiled ACPI binary for pre-launched VM, this
commit adds support for pre-launched VM to accept pre-compiled FDT
binary with default tag FDT_VMx, where x is the VM id.
Tracked-On: #8838
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
We may not need this for every architecture. Conditionally
wraps it.
Tracked-On: #8830
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Move vm_config to common scope. This change also affects auto-generated
C/H files from configuration tools.
Tracked-On: #8830
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Move reset_vm to common scope and remove unused reset_mode.
The reset_mode in x86 reset_vm code is simply used as an if condition
on whether the prepare_os_image should be executed. The entire
if body will never be true as we don't support resetting Service VM
without resetting ACRN hypervisor. To reset Service VM, the only
way is through a platform reset. Therefore the prepare_os_image
action will never be called. Delete this action.
Once the if condition and prepare_os_image action is deleted,
the input parameter "mode" is useless. Delete that too. The reset_vm
API in ACRN is simply a "warm reset". It does not need to take
input.
Tracked-On: #8830
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
The shutdown_vm is renamed to destroy_vm,
and introduce arch_deinit_vm as mandatory arch public API.
The original shutdown_vm checks if all VMs are shutting down,
and shutdown platform if no other VMs are running.
This logic is moved to the caller of original shutdown_vm
except hypercall, as we post-launched VM shutdown should not
trigger platform shutdown.
Tracked-On: #8830
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
start_vm is moved to common scope calling
arch_vm_start_bsp, which is a mandatory API
for all archs.
Tracked-On: #8830
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
The logic in prepare_vm can be embedded to launch_vms
and create_vm with better readability.
The movement does not change original logic.
Tracked-On: #8830
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
launch_vms and create_vm need to be moved together as both of
them reference file-static structures. All related structures
and helpers accessing structures are also moved.
Tracked-On: #8830
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Adjust kick_vcpu logic and move to common scope.
Moves also vcpu_make_request to common scope and adds
vcpu_has_pending_request and vcpu_take_request helpers.
Tracked-On: #8830
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Move reset_vcpu to common. Original x86 reset_vcpu
takes an extra parameter to handle both reset and init reset.
Common API hides this detail and let arch specific code handle
this.
This patch also renames x86 specific vcpu_reset_internal to
x86_vcpu_reset_internal.
Tracked-On: #8830
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
