As RPMB mux kernel module is going to be created,
there are two corresponding changes required for DM:
1. The name has been changed to /dev/rpmbmux.
2. DM does NOT check MAC of RPMB result returned by kernel
module because DM doesn't own the real key.
Tracked-On: #1508
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
VirtIO v1.0 spec 04 5.2.5:
- Protocol unit size is always 512 bytes.
- blk_size (logical block size) and physical_block_exp (physical block
size) do not affect the units in the protocol, only performance.
VirtIO v1.0 spec 04 5.2.6.1:
- A driver MUST NOT submit a request which would cause a read or write
beyond capacity.
Reject the requests that violate these terms.
v1 -> v2:
- add more comments for clarity
Tracked-On: #1422
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
movb is used for registers STATUS and CFGGENERATION whose size is 1
byte. Previously hv cannot report the correct MMIO trap size for
movb and virtio hard coded their size to 4 as a workaround. hv fixed
movb instruction emulation and MMIO size can be reported correctly.
This patch removes those workaround.
commit 9df8790ffc ("hv: Fix two minor issues in instruction emulation code")
Tracked-On: #1449
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
One additional command parameter is added for virtio-net to support
vhost net. The command line for vhost net is as follows:
-s n,virtio-net,tap_xxx,vhost
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost proxy interacts with vhost kernel thru vhost char dev. Internal
interfaces are implemented based on ioctls of vhost char dev in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are 2 eventfds for one virtqueue, one is for kick and the other
is for notify. eventfd used for kick is associated with a PIO/MMIO
region. eventfd used for notify is associated with a MSIx/INTx. The
eventfd pair is registered to VHM thru VHM char dev.
VHM irqfd currently only support MSIx. If INTx is used, vhost proxy
uses mevent to poll the call fd from vhost then inject interrupt to
guest.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost kernel driver needs the information of memory mapping between
GPA and the virtual addresses in device model process. This is
required for virtqueue related operations. This patch gets memory
mapping information from vmctx then conveys to vhost.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost_vq related interfaces are implemented in this patch. They are
vhost_vq_init/vhost_vq_deinit/vhost_vq_start/vhost_vq_stop.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds the vhost support to the device model virtio. A vhost
proxy is implemented based on the virtio framework and vhost char dev.
Key data structures and external interfaces are implemented in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some virtio ring structures and virtio feature bits are using the
same name/definition as those in kernel header files(linux/
virtio_ring.h, linux/virtio_config.h). Kernel header files must
be included to perform ioctls to support vhost. There are
compiling errors due to duplicated definitions. In this patch
the following renamings are done:
VRING_DESC_F_NEXT -> ACRN_VRING_DESC_F_NEXT
VRING_DESC_F_WRITE -> ACRN_VRING_DESC_F_WRITE
VRING_DESC_F_INDIRECT -> ACRN_VRING_DESC_F_INDIRECT
VRING_AVAIL_F_NO_INTERRUPT -> ACRN_VRING_AVAIL_F_NO_INTERRUPT
VRING_USED_F_NO_NOTIFY -> ACRN_VRING_USED_F_NO_NOTIFY
VIRTIO_F_NOTIFY_ON_EMPTY -> ACRN_VIRTIO_F_NOTIFY_ON_EMPTY
VIRTIO_RING_F_INDIRECT_DESC -> ACRN_VIRTIO_RING_F_INDIRECT_DESC
VIRTIO_RING_F_EVENT_IDX -> ACRN_VIRTIO_RING_F_EVENT_IDX
VIRTIO_F_VERSION_1 -> ACRN_VIRTIO_F_VERSION_1
vring_avail -> virtio_vring_avail
vring_used -> virtio_vring_used
vring_size -> virtio_vring_size
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Netmap/vale attempts to speed up network communication by bypassing the
TCP/IP network stack, which requires patching the physical NIC driver so
that applications developed based on netmap can interact directly with
the physical NIC driver. It may make sense for some specific scenarios
which requres very high bandwith (10Gb/s or 100Gb/s), we can even put up
with the complexity and compatibility introduced by this techology.
However for ACRN, a virtualization solution for IoT, there is no need to
support this backend. For 1Gb NICs or below, the VBS-U/tap solution
can already achieve near-native bandwidth. To keep simplicity and
improve compatibility, remove the netmap/vale support in dm.
Tracked-On: #1313
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When reset VBS-K status should be set to VIRTIO_DEV_INIT_SUCCESS
because at the time the char dev of VBS-K is still opened and
when set_status callback is called later, it depends on
VIRTIO_DEV_INIT_SUCCESS to resume.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
A new ioctl is introduced in VBS-K to issue reset command to kernel
VBS-K driver. This is used to support VBS-K S3. When FE enters S3
reset command is sent to device model. Backend driver in device model
should use this ioctl to inform the VBS-K drvier in kernel.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
RPMB frontend driver in UOS kernel has fixed unstable issue,
which requires BE for update as well. E.g. structure adjustment,
definition modification and so on.
Signed-off-by: Deng Wei <wei.a.deng@intel.com>
Signed-off-by: Huang Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
This device model is to configure the virtual IPU PCI device.
In order to execute this DM the lauch script needs to add
virtio-ipu as parameter to acrn-dm
For e.g. -s 21,virtio-ipu
Signed-off-by: Bandi,Kushal <kushal.bandi@intel.com>
Randomness sourced from /dev/random which does not block
once it has been seeded at bootup and you will always get
something when you read from that file. This is true on
Freebsd but unfortunately things are not the same on Linux.
Most cases, you can't read anything from /dev/random especially
on current acrn platform which lacking random events.
virtio_rnd inherted from freebsd doesn't work anymore.
This patch makes virtio_rnd working on Linux based SOS. It uses
blocking IO to sevice the front-end random driver and delays the
read operation into a new thread to avoid blocking the main
notify thread.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. support "writeback" and "writethru" mode toggling for virtio-blk
conditionally. When starting DM with "writethru" parameter in
virtio-blk, guest OS could not toggle cache mode. When starting DM
with "writeback" parameter in virtio-blk, guest OS could toggle
cache mode.
------------------------------
DM cmdline | toggle support
------------+-----------------
writeback | yes
writethru | no
------------------------------
2. To toggle cache mode, run below command in guest OS:
echo "write back" > /sys/devices/xxx/vdx/cache_type
OR
echo "write through" > /sys/devices/xxx/vdx/cache_type
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
currently, each virtio device has their own virtio_ops implementation.
Take virtio-blk for example:
static struct virtio_ops virtio_blk_ops = {
"virtio_blk",
1,
sizeof(struct virtio_blk_config),
virtio_blk_reset,
virtio_blk_notify,
virtio_blk_cfgread,
virtio_blk_cfgwrite,
NULL,
NULL,
VIRTIO_BLK_S_HOSTCAPS,
};
If start DM with two virtio-blk, this global variable will be
assigined to two virtio-blk instances. Changing hv_caps for one
instance will affect others. But different instances may need
different capabilities.
To support this requirement, we suggest to move hv_caps to
virtio_base structure, and each instance can return their own
capabilities.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
We should keep variable name in function declaration. It makes
things clearer and easier to be understood.
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Previously, either rnd->fd or vbs_k->fd isn't be closed in some cases.
this patch will close them in time.
V2: fix vbs_k->fd leak as well
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
The device model is a userspace application on SOS to config the
PCI devices for the UOS. Audio mediator device model is to config
the virtual audio PCI device.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
In virtio_heci struct there have deiniting/pending_reset/resetting
variables. All these variables represent the status of virtio heci devices.
Change them into one enum type variable for vheci status.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The VIRTIO_PCI_CAP_PCI_CFG capability creates an alternative access
method to the common configuration, notification, ISR and device-
specific configuration regions.
To access a device region, the driver writes into the capability
structure (ie. within the PCI configuration space) as follows:
- The driver sets the BAR to access by writing to cap.bar
- The driver sets the size of the access by writing 1, 2 or 4 to
cap.length
- The driver sets the offset within the BAR by writing to cap.offset
At that point, pci_cfg_data will provide a window of size cap.length
into the given cap.bar at offset cap.offset.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
A simulated rpmbfile requires to enable 4MB access by writing
the last byte.
Otherwise, the read operation should be failed if no write
was operated on the address greater than the read address.
Writing the last byte during file creating ensures the whole
4MB address is readable.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Full logic to supprot vRPMB:
1. Automatic switch between physical or simulated RPMB.
But hardcode to use simulated one.
2. Parse RPMB cmd to basic APIs to:
2.1 check request frame HMAC with uos vkey
2.2 replace RPMB frame with real values.
3. RPMB partitioning for multiple UOS.
It's hardcoded for coming config file support.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Du Min <minx.du@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Create file as simulated RPMB storage for pre-production usage.
Add RPMB APIs to emulate behavior of physical RPMB controllor.
Signed-off-by: Huang Yang <yang.huang@intel.com>
Signed-off-by: Du Min <minx.du@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
This patch implements virtio rpmb backend VBS-U component,
it includes the basic module interface with DM. This
component will work with vRPMB FE driver together to
provide one communication channel between UOS and SOS.
Signed-off-by: weideng <wei.a.deng@intel.com>
Signed-off-by: yingbinx <yingbinx.zeng@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Right now, the virtio_heci_proc_rx only process the first
available client at a time, then clear rx_need_sched flag to make
rx_thread sleep. It cause the remain data available clients lost the
current change to be processed. This patch resolves this issue, to
process all data available clients in a round prior to push rx_thread
enter sleep.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With rare probability, the two threads may try to get&put client
together. For client getting, the subsequent thread will get one
destroyed client. For client putting, it will cause acrn-dm get crashed
due to assert be triggered in virtio_heci_client_put.
Signed-off-by: Long Liu <long.liu@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The implementation of virtio_input_get_config is based on ioctl of
evdev fd. The following properties of input device are got by ioctl
to service configuation request from FE driver:
- name and devids
- propbit
- evbit: keybit/relbit/absbit/mscbit/swbit
- absbit
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Input events are read from host evdev fd and cached into a local queue.
When SYN_REPORT is read, the cached input events are sent to guest via
EVENT virtqueue. Guest input events are read from STATUS virtqueue then
written to host evdev fd.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The following are done in virtio_input_init:
- parse the command line to get the path of host evdev
- parse the command line to get the optional serial string
- calloc struct virtio_input and initialize it
- call virtio framework APIs to initialize virtio PCI
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Following functions have never been used anywhere.
Let's remove them.
fbsdrun_muxed()
fbsdrun_vmexit_on_hlt()
fbsdrun_vmexit_on_pause()
fbsdrun_disable_x2apic()
Remove weird prefix "fbsdrun" from following functions' name.
fbsdrun_virtio_msix() --> virtio_uses_msix()
fbsdrun_start_thread() --> start_thread()
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If guest doesn't initialize the net device, the tx thread will
block at the first tx_cond wait. When virtio_net_tx_stop is
invoked, the tx_thread will block on second tx_cond then.
Check whether we should exit tx_thread after first tx_cond
waiting
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If multiple ports are defined in the command line, is_console is
not set to a correct value for non-console ports when the definition
of this non-console port is following the definition of a console port.
For example in below definition, the second port is configured as
console port which is not correct:
-s 5,virtio-console,@pty:pty_port,file:file_port=/home/root/test1
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When doing warm reboot, the mevent module will not be deinitialized.
We need to delete all mevent registered while deinit virutal device.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
