The pt_dev.c in board folder is replaced by the one in scenarios folder,
so remove them.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
In this scenario, hypervisor will run two logical partition VMs.
Please note that the Kconfig of Hypervisor mode will be removed
gradually. In current Kconfig setting, the CONFIG_PARTITION_MODE
is still kept for now for back-compatibility.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the vm_configs[] is defined separately for sharing mode and
partition mode, but the concept of hypervisor mode will be removed. Instead
we will introduce scenario Kconfig for hypervisor to load different vm
configurations.
SDC(Software Defined Cockpit) is a typical scenario that ACRN supported
so we introduce this scenario for previously sharing mode and move its
configurations to scenarios/sdc folder. The configuration could be used
for all boards reference.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use MACROs in pt_dev.c to replace straight-forward BDF numbers. The
pt devices for each VM will be chosen from Board specific PCI devices
list which defined in pci_devices.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Preparing for hybrid mode:
- create vE820 for pre-launched VMs and do other init code when the
vm_config->type is PRE_LAUNCHED_VM.
- create ve820.c for each board because without wrapping by
CONFIG_PARTITION_MODE, ve820_entry[] needs to be visible even when
compiling target boards that haven't enabled pre-launched VMs.
- remove create_prelaunched_vm_e820() from vm.c and implement board
specific function for each $(CONFIG_BOARD)/ve820.c. The reasons being:
- don't need to define ve820_entry[32] for those boards that don't
support pre-launched VMs.
- more importantly, this makes it much easier to create different per-VM
vE820 when it's needed.
Tracked-On: #2291
Signed-off-by: Zide Chen <zide.chen@intel.com>
platform_acpi_info.h should be BOARD specific so move the header file
to configs/$(CONFIG_BOARD)/ folder.
So the target acpi info file detect process is:
Compiler search for $(CONFIG_BOARD)_acpi_info.h under
hypervisor/arch/x86/$(CONFIG_BOARD)/ first (the file is supposed to be
generated by offline tool so it is not included in original source), if
found, then the file is the target acpi info file. If not and at the
same time the ENFORCE_VALIDATED_ACPI_INFO Kconfig was set, the compiler
will stop and hint user to add target acpi info file by offline tool.
If ENFORCE_VALIDATED_ACPI_INFO was unset, then compiler will continue to
search for platform_acpi_info.h as target acpi info file under
hypervisor/arch/x86/$(CONFIG_BOARD) folder (with this file we could bypass
ENFORCE_VALIDATED_ACPI_INFO check and benifit for development). If this
file is not exist, then hypervisor/arch/x86/configs/platform_acpi_info.h
will be included as final target acpi info.
The process should work for UEFI path also, with a valid platform acpi
info file, S3/S5 should work on UEFI platform.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently for pre-launched VMs, HV intends to do EPT mapping for all GPA
space, which implies that it wastes HPA to back PCI hole and other vE820
entries that are not backed by physical memory.
This patch solves this issue and fixes ve820 entries whose length is not
aligned to 4K, and changes the lowmem entry's start GPA from 1MB to 2MB.
Tracked-On: #2587
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
IF CAT is supported, and we want setup initial values to
IA32_Type_MASK_n MSRs, We can define a global structure
platform_clos_array[PLATFORM_CLOS_NUM], it has 2 members:
1.msr_index, the MSR address of IA32_Type_MASK_n
2.clos_masky, the initial valuses
Global varible platform_clos_num is the number of IA32_Type_MASK_n,
from IA32_Type_MASK_0 to IA32_Type_MASK_<CLOS_MAX_NUM - 1>
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add sos_vm.h as a template in configs folder and is linked to
configs/$(CONFIG_BOARD)/sos_vm.h.
If customer need a board specific sos_vm.h, make a copy in
configs/$(CONFIG_BOARD)/ and replace the symbol link.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are still some misra-c violations when CONFIG_PARTITION_MODE is defined.
arch/x86/configs:
- remove the unused macro: PRE_LAUNCH_VM_NUM
- pt_dev.c: VMx_CONFIG_PCI_PTDEV_NUM has been defined in partition_config.h,
should not hard code them again in pt_dev.c.
- ve820.c: use "UL" suffix instead of "U" for 64 bits variables.
vmid is uint16_t in ACRN, so vuart_vmid should be uint16_t as well.
Fix another few other miscellaneous misra-c violations.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge E820_MAX_ENTRIES and NUM_E820_ENTRIES
to E820_MAX_ENTRIES.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Use acrn_vm_pci_ptdev_config struct for PCI PT devices configuration
in acrn_vm_config, the only needed configure item is PT devices's
vBDF and pBDF info. When init PT devices, the BDF info will be stored
in pci_vdevs[] of acrn_vm.
With this patch, the previous vpci_vdev_array struct is not needed.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add VM configure files for Intel apl-mrb and dnv-cb2 platforms.
The board specific config header is named as partition_config.h and
the PCI passthrough device list is named as pt_dev.c under
hypervisor/arch/x86/configs/$CONFIG_BOARD folder.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move e820_default_entries[] from vm_description.c to ve820.c and rename
to ve820_entry[] as a temparary solution for partiton mode e820 management;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The sos_vm config under arch/x86/configs/$(CONFIG_BOARD) folder should be
customer specific configuration, leave it back to customer.
When hypervisor start building, it will check whether BOARD specific sos_vm.h
exist in configs/$(CONFIG_BOARD) folder. If exist, then include this header;
if not, then include default sos_vm config header under configs/default folder.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add new struct member for acrn_vm_config;
- add sharing_config.c file with initialized vm_config array;
- add SOS VM config header for apl-mrb/apl-nuc/up2 and dnv-cb2 board;
- and partition_config.c file with dummy vm_config array;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
