it removes hypervisor.h and just includes needed header files.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit extend lapic pass-through for DM launched VM, generally for hard RT scenarios.
Similar to the partition mode, the vlapic is working under the xapic mode at first, only
when x2apic mode is enabled, lapic is passed through, because the physical LAPICs are
under x2apic mode.
Main changes includes:
- add is_lapic_pt() to check if a vm is created with lapic pt or not, to combine
codes of partition mode and DM launched vm with lapic passthrough, including:
- reuse the irq delievery function and rename it to dispatch_interrupt_lapic_pt();
- reuse switch_apicv_mode_x2apic();
- reuse ICR handling codes to avoid malicious IPI;
- intercept ICR/APICID/LDR msr access when lapic_pt;
- for vm with lapic passthrough, irq is always disabled under root mode.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we do not need pending_pre_work anymore, as we can make sure IO request
VCPU resume from where it paused.
Now only three fixed points will try to do schedule:
- vcpu_thread: before vm entry, will check reschedule flag and to it if needed
- default_idle: loop check reschedule flag to see if need switch out
- io request: if IO REQ need DM's handle, it will schedule out
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
this patch added full context switch support for scheduling, it make sure
each VCPU has its own stack, and added host_sp field in struct sched_object
to record host stack pointer for each switch out object.
Arch related function arch_switch_to is added for context switch.
To benefit debugging, a name[] field is also added into struct sched_object.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
When we use script to analyze the latency between vm_exit and vm_entry,
it does not include the duration of vm_exit handler.
The patch moves the vm_exit trace before vmexit_handler.
v2: move vm_exit trace right after run_vcpu.
Tracked-On: #2341
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
IO completion polling will access vcpu and vm structs. If doing it in
idle thread, there might be some race issues between vm destroying and
idle thread. They are running on different cores.
Got suggestion from Fengwei, decouple the polling action from idle
thread and just do it in vcpu thread, then we can guarantee idle thread
in really idle status.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Now, need_reschedule will test_and_clear the bit NEED_RESCHEDULE in
schedule context, then call schedule. It is not a exact match with the
name.
This patch move the flag clearing into scheudle, and need_reschedule
just check and return.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
use struct sched_object as the main interface of scheduling, then
make scheduler as an independent module to vcpu:
- add struct sched_object as one field in struct vcpu
- define sched_object.thread for switch_to thread
- define sched_object.prepare_switch_out/in for prepare_switch before
switch_to
- move context_switch_out/context_switch_in into vcpu.c as
vcpu.sched_obj.prepare_switch_out/in
- make default_idle as global idle.thread for idle_thread
- make vcpu_thread as vcpu.sched_obj.thread for each vcpu thread
- simplify switch_to based on sched_object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
This patch fixes incorrect vm_id captured when sampling PMU data. Currently,
the vm_id gets attributed to ACRN hypervisor, rather than actual guest vm_id.
The issue is identified that the existing code captures the guest vm info
after vmexit_hander function is completed, in which the profiling module
points its context to VMM. When the vmexit happens by PMI, the guest context
should be captured so that the attribution to proper guest vm can happen.
This change will also allow to capture more accurate TSC when vmexit happens.
Tracked-On: #2043
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently guest IA32_TSC_AUX MSR is loaded manually right before VM
entry, and saved right after VM exit.
This patch enables VM-Entry Control and VM-Exit Control to switch
MSR IA32_TSC_AUX between host and guest automatically. This helps to
keep vcpu_thread() function and struct acrn_vcpu cleaner.
Also it removes the dead code of intercepting IA32_TSC_AUX.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Remove the usage of HV_DEBUG in hv_main.c
The usage of HV_DEBUG in hv_main.c is for the shell command 'vmexit'.
Since vmexit info has been captured by acrntrace, there is no need to
keep this duplicated feature in shell command.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For data structure types "struct vcpu_arch", its name
shall follow Naming convention.
Naming convention rule:If the data structure type is
used by multi modules, its corresponding logic resource
is exposed to external components (such as SOS, UOS),
and its name meaning is simplistic (such as vcpu, vm),
its name needs prefix "acrn_". Variable name can be
shortened from its data structure type name.
The following udpates are made:
struct vcpu_arch arch_vcpu-->struct acrn_vcpu_arch arch
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For data structure types "struct vcpu", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vcpu *vcpu-->struct acrn_vcpu *vcpu
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
on KBL-NUC when input "vmexit" in hypervisor console,
the console or HV/SOS could be hung, the root cause is:
the log buffer is overflow for 8 CPU cores info.
to resolve the issue:
1. increase the shell log buffer size according to the
physical CPU max number
2. check the snprintf return value, if no buffer left,
just return.
Tracked-On: #1587
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds support to sep/socwatch profiling
Adds 2 new files include/arch/x86/profiling.h and arch/x86/profiling.c
which contains most of the implementation for profiling,most of the functions
in profiling.c have dummy implementation and will be implemented in next patches
a. cpu.c, Initial profiling setup is done as part of bsp_boot_post
and cpu_secondary_post flow
b. vmcall.c, New ioctl is added for performing profiling related
operations in vmcall_vmexit_handler
ioctl - HC_PROFILING_OPS
function - hcall_profiling_ops()
c. common/hypercall.c, hcall_profiling_ops() implementation.
d. hv_main.c, In vcpu_thread calling profiling related functions
to save vm context
e. acrn_hv_defs.h, list all the profiling command types
Tracked-On: projectacrn#1409
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Chinthapally, Manisha <manisha.chinthapally@intel.com>
The printf related functions have been called by other various
functions, e.g. get_ptdev_info(), get_ioapic_info, etc. The patch
is used to clear up the usage.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, the warning is promoted to error. The warning break ACRN
release build.
Tracked-On: #1343
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that each parameter in the MACRO shall be in brackets.
In some cases, adding brackets for all of the parameters may not be a
perfect solution.
For example, it may affect the code readability when there are many
parameters used in the MACRO.
And duplicated brackets will appear when one MACRO called another MACRO
which is using same parameters.
This patch convert some MACROs to inline functions to avoid such cases.
v1 -> v2:
* Remove the unnecessary changes in hypervisor/bsp/uefi/efi/boot.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Thare some debug specific code which don't run on release version, such as vmexit_time,
vmexit_cnt, sbuf related codes, etc...
This patch encloses the codes with #ifdef HV_DEBUG.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there will be 3 types of vcpu runtime contexts:
- runtime contexts always saved/restored during VM exit/entry, which
include general registers rax/rcx/rdx/rbx/rbp/rsi/rdi/r8~r15, cr2 and
msr for spectre control (ia32_spec_ctrl)
- runtime contexts on-demand cached/updated during VM exit/entry, which
include frequently used registers rsp, rip, efer, rflags, cr0 and cr4
- runtime contexts always read/write from/to VMCS, which include left
registers not in above
this patch add get/set register APIs for vcpu runtime contexts, and unified
the save/restore method for them according to above description.
v3:
- update vcpu_get/set_cr0/4 as unified interface to get/set guest cr0/cr4,
use on-demand cache for reading, but always write to VMCS for writing.
v2:
- use reg_cached/reg_updated for on-demand runtime contexts
- always read/write cr3 from/to VMCS
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'hv_main()' wraps several logic which has no dependencies
each other(enable VMX, prepare to create service os VM..),
in this case, split this function to make code logic clear.
remove 'is_vm0_bsp()' & 'hv_main()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add register_softirq to register a softirq handler
2. rename exec_softirq to do_softirq; raise_softirq to fire_softirq.
3. in do_softirq call registered softirq handler not call
the device softirq handle function directly
4. enable irq after vm exit and disable irq after the first
call do_softirq before vm enter.
5. call do_softirq again when irq disabled to handle the risk
unhandled softirq.
6. rename SOFTIRQ_DEV_ASSIGN to SOFTIRQ_PTDEV
7. remove SOFTIRQ_ATOMIC
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
V1:
In order to remove MISRA C violations for rule
219S, rename functions, macros whose name
starts with "_".
Also removed some __mmio functions because they are
duplicates and are not used anywhere.
Renamed functions like __assert, to asm_assert,
because they were only wrappers around asm calls.
V2:
Over and above the changes on V1, modified bitmap
functions names to lock (corresponding to unlock)
introduced in V1
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Parameter's type which is pointer should not be changed in the
scope of function,assign it's value to local variable to fixed
it out.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if defined CONFIG_VM0_DESC, HV will use predefined vm0_desc to config
VM0, otherwise, HV will run VM0 with all physical cpus.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix integer type violations,keep some violations which
related to hypcall and msix_entry_index.
V1->V2:1.modified API_MAJOR_VERSION from Makefile
2.sync acrn_common.h changed to device model
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed/unsigned conversion should add cast explicitily
or change the type of them to the same.
V1->V2:Fixed the 0U to 0UL because of the mistakes.
V2->V3:remove unsed macro
Signed-off-by: HuiHuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename vm_hw_logical_core_ids to vm_pcpu_ids
and changed the type to uint16_t.
V1->V2:rename the vm_hw_logical_core_ids
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are extra type conversion in the HV since cpu_id
type is uint32_t and the return value type of get_cpu_id
is uint16_t. BTW, the name of cpu_id is not clear enough
to express its usage.
So the following updates are made in this patch:
Update cpu_id type as unit_16 to reduce type casting;
Update related temporary variables type;
Update related print argument;
Change the input parameter name of interrupt_init as
cpu_id to keep align with function implement;
Rename cpu_id as pcpu_id as needed.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
V2->V3:
a.change the uint64_t type numeric constant's suffix from U to UL
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch represents TSC freqeuency in KHz using a 32-bit unsigned integer.
The conversion macros between ticks and us/ms are changed to inline functions to
enforce the types of the input parameters. Note that us_to_ticks accepts only
uint32_t (~4K us at most) and never overflows.
Results of some unit tests on the conversion functions:
calibrate_tsc, tsc_khz=1881600
64us -> ticks: 120422
64us -> ticks -> us: 63
511us -> ticks: 961497
511us -> ticks -> us: 510
1280000 ticks -> us: 680
1280000 ticks -> us -> ticks: 1279488
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are multiple helpers for collecting info to be printed on the ACRN uart
console. They are unreachable code in release builds in which the uart console
is removed.
To define a precise boundary for safety-related activities, this patch wraps the
declarations and definitions to these helpers with "#ifdef HV_DEBUG" so that
these unreachable APIs will be dropped in release builds.
v1 -> v2:
* Fix coding style: no empty lines between #ifdef and the wrapped code.
* Also drop get_rte_info() in ioapic.c, which is solely used by
get_ioapic_info().
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The local variable type should be transfer to non-basic type,
chaned it to length-prefix(uint32_t,int32_t ...) type.
Char *type or char array type which used to pointer a string
will be keeped.
V1->V2 add extra comments.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
phys_cpu_num is more popular than phy_cpu_num, update them
through command.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C explicit required expression should be boolean when
in branch statements (if,while...).
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA C required that return value should be used, missing for it should
add "(void)" prefix before the function call.
Some function can be declared without return value to avoid this problem.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current code is missing to handle the following race condition:
Before:
sti
|
V
handle softirq with
a while loop
| <----- if a new softirq generated at this point,
V it will be missed to be handled.
cli
|
V
return with unclear softirq bitmap
After:
again:
sti
|
V
handle softirq with
a while loop
|
V
cli
|
V
check if a new softirq generated, if yes,
jump back to above again lable point,
and do a while loop again.
|
V
return with clear softirq bitmap
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change need_scheduled fileds of schedule context to flags because
it's not only used for need_schedule check.
Add two functions to request/handle cpu offline.
The reason we only handle cpu offline request in idle thread is
that we should pause the vcpu running on target pcpu. Then it's
only possible that target pcpu get cpu offline request in idle
thread.
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
To handle cpu down/up dynamically, arcn needs to support vmx off/on
dynamically. Following changes is introduced:
vmx_off will be used when down AP. It does:
- vmclear the mapped vcpu
- off vmx.
exec_vmxon_instr is updated to handle start and up AP both. It does
- if vmx was on on AP, load the vmxon_region saved. Otherwise,
allocate vmxon_region.
- if there is mapped vcpu, vmptrld mapped vcpu.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yin Fegnwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
The current implementation of per_cpu relies on several non-c99 features,
and in additional involves arbitrary pointer arithmetic which is not MIS-
RA C friendly.
This patch introduces struct per_cpu_region which holds all the per_cpu
variables. Allocation of per_cpu data regions and access to per_cpu vari-
ables are greatly simplified, at the cost of making all per_cpu varaibl-
es accessible in files.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
