This patch fixes an issue with generation of guest ve820 when the size
of the memory is >512MB. The issue is primarily with respect to converting
between hex and int.
Tracked-On: #4219
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
VT-d code and DMAR/board.c related acrn-config tool changed
in upstream. This fix adds as a bridge for backporting VT-d
related changes from upstream to v1.4
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
There seems to be a corner case where target xml file
fails to get generated if there was no P-state scaling driver
or C-state idle driver present. This patch addresses it by
handling the file not present exception and setting a warning
as well a "not available" string to successfully generate
target xml file.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4199
Acked-by: Victor Sun <victor.sun@intel.com>
Current board parse logic would be broken if acpi_idle/acpi-cpufreq
driver is not loaded by native kernel.
This patch would just leave a warning to user and continue to parse
other information in this case.
Tracked-On: #4082
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch modifies the python scripts in scenario,
board and vm-configuration to support,
1. Generation of seperate ve820 for each VM.
2. Ability to configure each VM's HPA from
acrn-config UI tool.
3. Non-contiguous HPAs for pre-launched VMs.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4195
Acked-by: Anthony Xu <anthony.xu@intel.com>
Some API calls have the same function in library config,
the patch refines the API calls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Current ve820 generation script assumes the size of pre-launched
VM memory is less than or equal to 512 MB (Must be the assumption
of logical partition scenario as such).
This patch extends the script to handle pre-launched VM memory
sizes greater than 512 MB.
Tracked-On: #4182
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Pre-launched or SOS VMs could use ramdisks to boot. This
patch adds acrn-config tool support to parse such use-case
scenario xmls.
Tracked-On: #4197
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds ramdisk_mod tag to all supported boards and
logical partition, hybrid, industry and sdc xmls
Tracked-On: #4197
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For vuart1, if it's mapped to a real native serial port, we must
re-use the native serial port io base and irq number. If no native
serial port is mapped to vuart1, non-exist io base and irq should
be used.
Please note: UOS launch script may need be updated according to
which serial port index is used by vuart1.
Now, we are using ttyS1 of SOS for vuart1 in our release. User may
need to remap vuart to different ttySx by following above rule if
ttyS1 in user platform is used by other devices like Bluetooth/Wifi.
Tracked-On: #4016
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-On: Victor Sun <victor.sun@intel.com>
Enable xhci usb mediator for whl-ipc-i5/whl-ipc-7 and KBL NUC for LaaG
and WaaG.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Enhance the $(board).config for new board.
Serial config should be set in $(board).config for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
mem_size should be set from xml, it should not be overrided dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
interrupt_storm should be enabled while passthrough device was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to generate launch script for whl-ipc-i5/whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. run_cotainer is linux type uos, remove related runC script from
unnercessary luanch script.
Tracked-On: #3930
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i5.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
ttys_n has already been parsed, no need to parse again. otherwise the
value will be overrided.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The 'keep_gsi' flag is needed only when UOS enabled msi driver,
so keep the flag for Android only.
Tracked-On: #3948
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
'virtio-blk' not needed for PREEMPT-RT LINUX vm.
Tracked-On: #3949
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As vm3 for industry scenario was removed from scenario config, so
modify the uos id to proper id.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We should use launch_$(uos type) for launch function name instead of using
launch_$(board name).
Tracked-On: #3931
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add mem_size parameter for acrn-dm while generating launch script.
Traked-On: #3932
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Add the character of quotation marks for launch vm script.
2. Audio codec should put together with audio devcie and pass to
vm , otherwise report an error message to webUI.
Tracked-On: #3937
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The VM2 of INDUSTRY scenario need 2 vCPUs for performance, so there would
be no available pCPU for VM3, need to remove VM3 for this scenario.
Tracked-On: #3925
Signed-off-by: Victor Sun <victor.sun@intel.com>
The previous method to handle ttyS info has an assumption that PCI
serial devices are all mmio type, this caused incorrect BDF info in
board XML file.
This patch fix this issue by dropping serial device BDF info and
replace it with IO type.
Tracked-On: #3900
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Filter out the wifi/ethernet device from webUI with below PCI device class coding rule:
ethernet: 0200/0280;
wifi: 0280/0d20/0d21/0d80;
Tracked-On: #3917
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
fix the issue that there is no error message displayed in launch setting of WebUI.
Tracked-On: #3913
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Fix the wrong 'key' type of error list returned to webUI for parsing.
Tracked-On: #3913
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some BIOS does not support s3/s5, so there might be no _S3 or _S5
package in host ACPI table, previous code did not handle this, so
the build would be failed with the generated board file.
Set default s3/s5 package value to 0 for such case.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Check git environment only when '--enable_commit' option was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine the vbootloader type of vm,
The vbootloader type should be select from vsbl/ovmf/none in webUI item.
Tracked-On: #3879
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add the '--windows' option to launch WaaG vm.
Tracked-On: #3880
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As the blkid info contains 'UUID' information, which easy to lead to
confuse with the vm 'UUID'. So refine the format for block device.
v1-v2:
1). align the style in BLOCK_DEVICE_INFO tag
2). add 'mmcblk1p3' in BLOCK_DEVICE_INFO tag
v2-v3:
1). correct the commit message.
2). refine the api of handle_block_dev
Tracked-On: #3754
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Correct the default settings of ipu/ipu_i2c device for apl-up2.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The audio and Wifi device info in apl-mrb config xmls is wrong, fix it.
Tracked-On: #3863
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The vm name for Preempt-RT Linux is not defined in launch script,
causing Preempt RT linux launch failed.
This patch refine the vm name and define the vm name for Preempt-RT
Linux to fix such kinds of issues.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Sometimes character '-' or space need to be converted to '_' to make string format uniformed.
Add this common api to satisfy such requirment and refine the code for board name generating.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some acrn-dm arguments are not needed when launch some vm, but the
item check fucntion still has strict check on the arguments, which
result in the script generating failure.
This patch add whilte list to skip the check.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Fixed the issue that parameter of 'boot_audio_option' is lost when
audio/auido codec device is configured.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There are 2 scenarios to pass through audio/audio_codec:
1. Only pass through audio device to vm.
2. Pass through audio and audio codec device to vm.
The improvement is to generate proper boot audio option for each
scenario.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
some parameters for media_pt function are not needed any more,
remove these redundant parameters.
Tracked-On: #3853
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
'run_container' starts to run the container which contains the
clearlinux rootfs. store it in the same launch script with clearlinux.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove '-V' option of launch type while generating launch script.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. enable item check for acrn-dm args which set from webUI input.
2. remove 'cpu_num' tag from launch config xml.
v1-v2:
1). add method to check 'cpu_num'/'mem_size' in config xml.
v2-v3:
1). as 'vcpu_num' configured in scenario, the parameter for acrn-dm is no
longer needed, remove 'cpu_num' tag and its handler from launch config.
2). add 'poweroff_channel' tag for generic config.
Tracked-On: #3811
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Change i915.domain_plane_owners and i915.avail_planes_per_pipe for
hybrid scenario;because kvm based User vm will use PipeA.
Tracked-On: #3840
Signed-off-by: Victor Sun <victor.sun@intel.com>
add a confirmation interface to let user to commit changes into local tree
or not commit after generated source codes in config app.
Tracked-On: #3834
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
