Enable vMCE feature to boot windows guest.
vMCE is set in EDX from Microsoft TLFS spec, to support windows guest
vMCA and vMCE should be supported by guest CPUID.
Support MSR_IA32_MCG_CAP and MSR_IA32_MCG_STATUS reading when vMCE is enabled,
but they are not emulated yet, so return 0 directly.
Tracked-On: #1867
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In the presence of SOS, ACRN uses fallback_iommu_domain which is the same
used by SOS, to assign domain to devices during ACRN init. Also it uses
fallback_iommu_domain when DM requests ACRN to remove device from UOS domain.
This patch changes the design of assign/remove_iommu_device to avoid the
concept of fallback_iommu_domain and its setup. This way ACRN can commonly
treat pre-launched VMs bringup w.r.t. IOMMU domain creation.
Tracked-On: #2965
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
add new hypercall get platform information,
such as physical CPU number.
Tracked-On: #2538
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN builds mptable for pre-launched VMs. It uses CONFIG_PARTITION_MODE
to compile mptable source code and related support. This patch removes
the macro and checks if the type of VM is pre-launched to build mptable.
Tracked-On: #2941
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently VM id of NORMAL_VM is allocated dymatically, we need to make
VM id statically for FuSa compliance.
This patch will pre-configure UUID for all VMs, then NORMAL_VM could
get its VM id/configuration from vm_configs array by indexing the UUID.
If UUID collisions is found in vm configs array, HV will refuse to
load the VM;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Return true if vm configs is sanitized successfully, otherwise return false;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The code mixed the usage on term of UUID and GUID, now use UUID to make
code more consistent, also will use lowercase (i.e. uuid) in variable name
definition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We could call vlapic API directly, remove vlapic_rdmsr/wrmsr to make things easier.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
renamed: include/dm/pci.h -> include/hw/pci.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now the io_emul.c is relates with arch,io_req.c is common,
move some APIs from io_emul.c to io_req.c as common like these APIs:
register_pio/mmio_emulation_handler
dm_emulate_pio/mmio_complete
pio_default_read/write
mmio_default_access_handler
hv_emulate_pio/mmio etc
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move ‘emul_pio[]/default_io_read/default_io_write’
from struct vm_arch to struct acrn_vm
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- this api is related with arch_x86, then move to x86 folder
-- rename 'set_vhm_vector' to 'set_vhm_notification_vector'
-- rename 'acrn_vhm_vector' to 'acrn_vhm_notification_vector'
-- add an API 'get_vhm_notification_vector'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN uses CONFIG_PARTITION_MODE macro to compile out CPU_IRQ_ENABLE/DISABLE
APIs. With vector remapping enabled for pre-launched VMs, this is of no use.
And for VMs with LAPIC pass-thru, interrupts stay disabled in vmexit loop
with the help of is_lapic_pt() API.
Tracked-On: #2903
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now the MAX supported VM number is defined explicitly for each scenario,
so move this config from Kconfig to VM configuration.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we use unified vm_config.c for all scenarios and use MACROs
for each configuration items, then the initialization of vm_configs[]
becomes more complicated when definition of MACROs increase, so change
the coding style that all configurable items could be explicitly shown in
vm_configuration.c to make code more readable.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add, update '@return' and '@retval' statements to the API descriptions related
to vCPU operations.
Tracked-On: #1844
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
As vector re-mapping is enabled for pre-launched/partition mode VMs,
there is no more need for separate interrupt routine i.e.
partition_mode_dispatch_interrupt.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For pre-launched VMs MSI/MSI-x configuration writes are not intercepted by ACRN.
It is pass-thru and interrupts land in ACRN and the guest vector is injected into
the VM's vLAPIC. With this patch, ACRN intercepts MSI/MSI-x config writes and take
the code path to remap interrupt vector/APIC ID as it does for SOS/UOS.
Tracked-On: #2879
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
To keep consistency between HV and DM about PM1A_CNT_ADDR,
it is better to replace the PM1A_CNT related MACROs used in DM
with VIRTUAL_PM1A_CNT related MACROs in acrn_common.h.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
This patch mainly does the following:
- Replace prefix RT_VM_ with VIRTUAL_.
- Remove the check of "addr != RT_VM_PM1A_CNT_ADDR" as the handler is specific for this addr.
- Add comments about the meaning of return value.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Intel SDM Vol3 23.8 says:
The INIT signal is blocked whenever a logical processor is in VMX root operation.
It is not blocked in VMX nonroot operation. Instead, INITs cause VM exits
So, there is no side-effect to send INIT signal regardless of pcpu active status.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
After using get_vm_from_vmid(), vm pointer is always not NULL. But there are still many NULL pointer checks.
This commit replaced the NULL vm pointer check with a validation check which checks the vm status.
In addition, NULL check for pointer returned by get_sos_vm() and get_vm_config() is removed.
Tracked-On: #2520
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the vm_configs[] is defined separately for sharing mode and
partition mode, but the concept of hypervisor mode will be removed. Instead
we will introduce scenario Kconfig for hypervisor to load different vm
configurations.
SDC(Software Defined Cockpit) is a typical scenario that ACRN supported
so we introduce this scenario for previously sharing mode and move its
configurations to scenarios/sdc folder. The configuration could be used
for all boards reference.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the default handlers for PIO and MMIO access which returns all
FFs on read and discards write. These default handlers are registered
when SOS VM or pre-launched VM is created.
v3 -> v4:
- use single layer if in hv_emulate_pio
- change the implementation of pio_default_read
v2 -> v3:
- use runtime vm type instead of CONFIG_PARTITION_MODE
- revise the pio/mmio emulation functions
- revise the pio/mmio default read functions according to MISRA C
- revise the commit message
v1 -> v2:
- add default handlers members in struct acrn_vm and add interfaces
to register default handlers for PIO and MMIO.
Tracked-On: #2860
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch makes make_reschedule_request support for kicking
off vCPU using INIT.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This API is only for kick vcpu out of non-root mode when
RTVM poweroff by itself. And the first caller will soon come
along with the next patch.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We set the vm state as VM_POWERING_OFF when RTVM is trying to poweroff by itself.
We will check it when trying to pause vCPUs of RTVM. Only if vm state equal to
VM_POWERING_OFF, we take action to pause the vCPUs of RTVM. Otherwise, we will
reject the pause request.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The virtual pm port of RTVM is intercepted by HV. But the HV needs to inform the DM as well.
So we will forward the virtual S5 request to DM too
The handler in HV just set the pm state flag (VM_POWERING_OFF) which indicate that the RTVM is powering
off by itself. Meanwhile, there are data resources in VHM and DM should be released once we handle the PM
of RTVM in HV. So, return to DM to go through the entire VM destroy cycles to release the resources.
During the cycles, the DM will try to pause vm through hypercall. In the hypercall handler in HV, we will
check the pm state flag. If it is set, pause all the vCPUs of the vm. Otherwise, reject the request.
In this way, we can make sure that RTVM can only trigger its s5 by itself. All
other S5 request from external will be rejected.
Here is sequence chart of RTVM s5.
poweroff
+-----------+ +----------+ +-----------+ +----------+
| vBSP | | vAPs | | HV | | DM |
+-----+-----+ +----------+ +-----+-----+ +-----+----+
| | | |
| Stop all other cpus | | |
+----------------------------+ | |
| | |Disable LAPIC | |
| +<-+ | |
| | | |
| +--+ | |
| | |HLT in | |
| All other cpus stopped | |non-root mode | |
+----------------------------+ | |
| Call ACPI method to enter s5 | |
+-------------------------+---------------------> | |
| | Set s5 flag | |
| | <---------------------+ |
| | APs paused | Re-inject IOREQ TO DM
| | +-------------------> +-------------------> +
| | | Pause VM |
| | Check S5 flag: | <-------------------+
| | - If set, pause vm | VM paused |
| | - If no, reject | +-----------------> +--+
| | | Destroy VM | |Deinit works
| | | <--------------------<-+
| | | VM destroyed |
| | | +-----------------> |
+ + + +
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_read_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch makes io_write_fn_t return true or false instead of void.
Returning true means that the handler in HV process the request completely.
Returning false means that we need to re-inject the request to DM after
processing it in HV.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch checks if the GUEST_FLAG_RT is set when GUEST_FLAG_LAPIC_PASSTHROUGH is set.
If GUEST_FLAG_RT is not set while GUEST_FLAG_LAPIC_PASSTHROUGH is set, we will refuse
to boot the VM.
Meanwhile, this patch introduces a new API is_rt_vm.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This flag indicates that if the vm is RTVM.
And if a vm has GUEST_FLAG_LAPIC_PASSTHROUGH flag set,
we must set the GUEST_FLAG_RT at the same time.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
In hypervisor fuzzing test, hypervisor will hang
if issuing HV_VM_SET_MEMORY_REGIONS hypercall after
target VM is destroyed.
this patch is to fix above vulnerability.
Tracked-On: #2849
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The vm_config in hypervisor restricted VM name size to
MAX_CONFIG_NAME_SIZE (32 bytes). When UOS is launched by DM, the vmname
is passed in as the last optional args, we hope to to copy it to vm_config
in the future. So the size of vmname in DM args should be restricted to
MAX_CONFIG_NAME_SIZE, too. Because MAX_CONFIG_NAME_SIZE will be used by DM,
we move it from vm_config.h to acrn_common.h
We also rename MAX_CONFIG_NAME_SIZE to MAX_VM_OS_NAME_LEN, because it will
be used by another components, should has a clear name.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
devicemodel/include/public/acrn_common.h should be identical with
hypervisor/include/public/acrn_common.h, so we can use a soft link
to hypervisor's acrn_common.h for devicemodel.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Since we always enable "Use TPR shadow", so operate on TPR will not
trigger VM exit. So remove these APIs.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Delete the 2 files and merge their code into vpci.c:
hypervisor/dm/vpci/partition_mode.c
hypervisor/dm/vpci/sharing_mode.c
And change the Makefile accordingly
Change PCI_PRIV_H_ to VPCI_PRIV_H_ in vpci_priv.h
Some misra c fix:
Add @pre for functions
Add const to function parameters
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Instead of using CONFIG_PARTITION_MODE at compile time to compile in and call
the partition mode/sharing mode specific functions, always compile in all sharing
mode and partition code, then calling the corresponding functions dynamically based
on vm type (PRE_LAUNCHED_VM and SOS_VM) at runtime.
Some misra c fix:
Add @pre for functions
Add const to function parameters
Add ASSERT in pci_cfgdata_io_read and pci_cfgdata_io_write
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Re-organize the code to remove usage of hypervisor.h from
bsp folder, without changing any functionality.
Tracked-On: #2694
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Currently MSR IA32_MISC_ENABLE is passthrough to guest.
However, guest may change the value of this MSR, which will cause issue in hypervisor.
This patch uses VMX MSR store area to isolate the MSR IA32_MISC_ENABLE between guest and host.
TODO:
Some bits of the MSR IA32_MISC_ENABLE is not just per core, but per package.
So need to check if need to prevent guest from setting or clearing these bits that may affect other cores.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Rename the field msr_num to msr_index, which is more accurate,
in struct msr_store_entry.
Tracked-On: #2834
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
-- move this api from misc.c to timer.c to avoid
reverse dependency, and remove misc.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
- for all cases of referring guest bootargs size, replace MEM_2K with
CONFIG_MAX_BOOTARGS_SIZE for better readability.
- remove duplicated MAX_BOOTARGS_SIZE definition from vm_config.h.
Also fix one minor issue in general_sw_loader() which uses copy_to_gpa()
to copy a string. Since copy_to_gpa() makes use of memncpy_s() to do the
job, the size parameter should include the string null ternimator.
Tracked-On: #2806
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the unused seed parsing source files under
hypervisor/boot/sbl and related header files.
Tracked-On: #2724
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
This patch hide Memory Protection Extention (MPX) capability from guest.
- vCPUID change:
Clear cpuid.07H.0.ebx[14]
Clear cpuid.0DH.0.eax[4:3]
- vMSR change:
Add MSR_IA32_BNDCFGS to un-supported MSR array.
- XCR0[4:3] is not allowed to set by guest.
Tracked-On: #2821
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In preparation for vpci ops function removal, so that these functions can be
called directly instead by vpci code
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vdev ops for partition mode, change related code to directly call the corresponding
functions instead
Remove struct pci_vdev_ops from vpci.h
Add @pre for pci_find_vdev_by_pbdf and pci_find_vdev_by_vbdf/partition_mode_vpci_init
Change the return value from int32_t to void to comply with misra c and
add ASSERT/panic in the functions (if necessary):
vdev_hostbridge_init
vdev_hostbridge_deinit
vdev_pt_init
vdev_pt_deinit
Still use pr_err in partition_mode_cfgread and partition_mode_cfgwrite to check if vdev cfgread/cfgwrite
access is aligned on 1/2/4 bytes, which is the only case that vdev cfgread/cfgwrite will return
nonzero, pr_err will be removed in subsequent patch titled "unify the sharing
mode and partition mode coding style for similar functions"
Remove @pre for local variables
Add ASSERT in partition_mode_pdev_init to check if pdev is NULL (user config
error)
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN uses global invalidation for all DMAR translation caches. Whenever
a UOS is shutdown or rebooted, it ends up clearing entries in translation
caches belonging to other VMs/domains. This patch adds support for
domain/device level invalidation for DMA translation caches and index
based invalidation for Interrupt Remapping Cache.
Tracked-On: #2738
Signed-off-by: Sainath Grandhi sainath.grandhi@intel.com
Acked-by: Eddie Dong eddie.dong@intel.com
Preparing for hybrid mode:
- create vE820 for pre-launched VMs and do other init code when the
vm_config->type is PRE_LAUNCHED_VM.
- create ve820.c for each board because without wrapping by
CONFIG_PARTITION_MODE, ve820_entry[] needs to be visible even when
compiling target boards that haven't enabled pre-launched VMs.
- remove create_prelaunched_vm_e820() from vm.c and implement board
specific function for each $(CONFIG_BOARD)/ve820.c. The reasons being:
- don't need to define ve820_entry[32] for those boards that don't
support pre-launched VMs.
- more importantly, this makes it much easier to create different per-VM
vE820 when it's needed.
Tracked-On: #2291
Signed-off-by: Zide Chen <zide.chen@intel.com>
Previously vrtc is for partition mode only, now enable it for sharing mode;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vdev ops for sharing mode, directly call the corresponding functions
instead of calling the ops callbacks (indirectly)
Remove alloc_pci_vdev() and merge its code into init_vdev_for_pdev() to simplify code
Remove @pre for local variables
Change the return value from int32_t to void to comply with misra c and
add ASSERT in the functions (if necessary) to verify the assumptions for debug build:
vmsi_init
vmsix_init
vmsi_deinit
vmsix_deinit
Add @pre for vmsix_init_helper and make it a void function, use ASSERT to verify
the assumption for debug build.
Add ASSERT in get_sos_vm
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is to fix the following misra c violation:
Pointer param should be declared pointer to const. : vdev
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
No need to use these 2 variables as global (per pci_misx), can simply use local
variables in code instead.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now we only configure "hide MTRR" explicitly to false for SOS. For other VMs,
we don't configure it which means hide_mtrr is false by default.
And remove global config MTRR_ENABLED
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
VM use CLOS when set CLOS_REQUIRED in guest flags of vm_config. The
wrong comment is 'if guest_flags has CAT_ENABLED', and should be fixed
as 'if guest_flags has CLOS_REQUIRED'
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
1. move seed_info structure from trusty.h to seed.h
2. replace "#include <hypervisor.h>" with necessary including headers
in seed.c/seed_abl.c/seed_sbl.c
Tracked-On: #2777
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove vmx_cr0/vmx_cr4 from ext_context structure, they are duplicated
with cr0/cr4 fields in run_context.
Switch cr0/cr4 of run_context structure on demand when do world switch.
Remove vmx_cr0_read_shadow/vmx_cr4_read_shadow from ext_context structure.
These fields should be same for both normal world and secure world.
Tracked-On: #2773
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the populate_msi_struct() function, put msi initialization specific
functionality into msi.x, and put msix initialization specific functionality
into msix.c
Rename mmio_hva to mmio_hpa and change related code to fix misra c violation:
Cast from pointer to integral type. : (void* to unsigned long): ( uint64_t ) hpa2hva ( bar -> base )
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to remove the usage of hypervisor.h,
modularize the boot folder.
Current changes include modifications to remove
usage of acrn_vm structure pointer, from some of
the call, and remove calls to hypervisor.h,
as and when deemed fit.
Removed hva2gpa, as this was not used anywhere else
after the changes.
Tracked-On: #2694
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move instr_emul_ctxt instance from struct per_cpu_region
to struct vcpu, and rename it from g_inst_ctxt to inst_ctxt
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now the 'cpu_mode' is unused in struct vm_guest_paging,
and there is the same variable in struct acrn_vcpu_arch
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch mainly unifies init_vm_boot_info's implementation between SBL and
UEFI.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch unifies the bsp interface between UEFI and SBL.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add two functions to combine constraint for APICv:
is_apicv_basic_feature_supported: check the physical platform whether support
"Use TPR shadow", "Virtualize APIC accesses" and "Virtualize x2APIC mode"
is_apicv_advanced_feature_supported: check the physical platform whether support
"APIC-register virtualization", "Virtual-interrupt delivery" and
"Process posted interrupts".
If the physical platform only support APICv basic feature, enable "Use TPR shadow"
and "Virtualize APIC accesses" for xAPIC mode; enable "Use TPR shadow" and
"Virtualize x2APIC mode" for x2APIC. Otherwise, if the physical platform support
APICv advanced feature, enable APICv feature for xAPIC mode and x2APIC mode.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Except for few translation structures in x86 IOMMU, all translation
structures are 128-bit. All the translation structures used by ACRN
are 128 bit. So removed multiple definitions and defined a struct
that accomodates 128 bit entries.
Tracked-On: #2668
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
platform_acpi_info.h should be BOARD specific so move the header file
to configs/$(CONFIG_BOARD)/ folder.
So the target acpi info file detect process is:
Compiler search for $(CONFIG_BOARD)_acpi_info.h under
hypervisor/arch/x86/$(CONFIG_BOARD)/ first (the file is supposed to be
generated by offline tool so it is not included in original source), if
found, then the file is the target acpi info file. If not and at the
same time the ENFORCE_VALIDATED_ACPI_INFO Kconfig was set, the compiler
will stop and hint user to add target acpi info file by offline tool.
If ENFORCE_VALIDATED_ACPI_INFO was unset, then compiler will continue to
search for platform_acpi_info.h as target acpi info file under
hypervisor/arch/x86/$(CONFIG_BOARD) folder (with this file we could bypass
ENFORCE_VALIDATED_ACPI_INFO check and benifit for development). If this
file is not exist, then hypervisor/arch/x86/configs/platform_acpi_info.h
will be included as final target acpi info.
The process should work for UEFI path also, with a valid platform acpi
info file, S3/S5 should work on UEFI platform.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- change 'tsc_khz' to static
-- move these APIs from rtl.h to timer.c
us_to_ticks()
ticks_to_us()
ticks_to_ms()
rdtsc()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch simplifies `get_primary_vcpu` and `vcpu_from_vid`.
The target_vcpu could be get from the index directly.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Correct wrong use of vector where lvt_index should be used.
Tracked-On: #1842
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
ECS.bit31 is not used and always return 0 in SDM Vol.2A 3-195. It's a
standard way to indicate whether there is a hypervisor.
Tracked-On: #2490
Ref: https://lwn.net/Articles/301888/
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
pci_vdevs is vpci stuff so it would be better to make it managed by vpci rather than by vm.h,
both sharing mode and partition mode can use pci_vdevs[] to maintain its own
per vm vdev list.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- merge sharing_config.c and partition_config.c to vm_config.c;
- make vm_configs[] static;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Do not refer vm_configs[] directly in vm module;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move sanitize_vm_config() from vm.c to vm_config.c;
- move get_vm_config() from vm.h to vm_config.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enlarge hypervisor BSS section to support EPT mapping of additional
1G address space. This is used to support 64bit PCI bar whose address
is strictly above 4G.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When CAT is supported, UOS can setup acrn_vm_config.clos, to use CAT
feature. Eg.,
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags |= CLOS_REQUIRED,
.clos = 1,
},
};
sanitize_vm_config() will check if CAT is supported and
vm_configs.clos is valid.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Enumarate capability of Cache Allocation Technology(CAT) on X86 platform,
when HV init the primary cpu. If CAT is supported, store its info
to global struct cat_hw_info.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IF CAT is supported, and we want setup initial values to
IA32_Type_MASK_n MSRs, We can define a global structure
platform_clos_array[PLATFORM_CLOS_NUM], it has 2 members:
1.msr_index, the MSR address of IA32_Type_MASK_n
2.clos_masky, the initial valuses
Global varible platform_clos_num is the number of IA32_Type_MASK_n,
from IA32_Type_MASK_0 to IA32_Type_MASK_<CLOS_MAX_NUM - 1>
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) The previous implementaion will recalculate the whole EOI-exit bitmap for
each RTE once the destination, trigger mode, delivery mode or vector of a RTE
has changed and update the EOI-exit bitmap for each vcpu of the VM.
In this patch, only set the corresponding bit of EOI-exit bitmap for
a vcpu when a level triggered interrupt has accepted in IRR or clear the
corresponding bit of EOI-exit bitmap for a vcpu when a dege triggered interrupt
has accepted in IRR which means only update a bit of EOI-exit bitmap in a vcpu
when updating TMR.
2) Rename set eoi_exit related API to set eoi_exit_bitmap.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
--move several uart API declarations from console.h to uart16550.h
--move several shell API declarations from console.h to shell.h
--add dbg_cmd.h, move 'handle_dbg_cmd' declaration from console.h
to dbg_cmd.h
--move debug/uart16550.h to include/debug/uart16550.h since some
uart APIs will be called by external files
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: bsp/uefi/cmdline.c
modified: debug/console.c
modified: debug/dbg_cmd.c
modified: debug/uart16550.c
modified: debug/vuart.c
modified: hw/pci.c
modified: include/arch/x86/multiboot.h
modified: include/debug/console.h
new file: include/debug/dbg_cmd.h
new file: include/debug/shell.h
renamed: debug/uart16550.h -> include/debug/uart16550.h
remove vpci_vdev_array in vm_config struct as it is not used any more;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are still some misra-c violations when CONFIG_PARTITION_MODE is defined.
arch/x86/configs:
- remove the unused macro: PRE_LAUNCH_VM_NUM
- pt_dev.c: VMx_CONFIG_PCI_PTDEV_NUM has been defined in partition_config.h,
should not hard code them again in pt_dev.c.
- ve820.c: use "UL" suffix instead of "U" for 64 bits variables.
vmid is uint16_t in ACRN, so vuart_vmid should be uint16_t as well.
Fix another few other miscellaneous misra-c violations.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_post_intr to apicv_post_intr and move it to internal function
since it's only used in vlaic.c.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since it's only used in vlaic.c
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vm_active_cpus from vlapic.c to vm.h since it's vm related
not vlapic related.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pci_vdev contains a pointer to pdev, which stores pbdf, so there is no need
to store a separate pbdf in vdev.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use a function to compare bdf instead and some related code cleanup
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge E820_MAX_ENTRIES and NUM_E820_ENTRIES
to E820_MAX_ENTRIES.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
There are two bugs related to PDPT address calculation for PAE mode.
1. Current code doesn't ignore the "Ignored" fileds when load pdpt registers.
Mask the "Ignored" fileds according to SDM Figure 4-7 Vol3.
2. Current code only ignores 4bits instead of 5bits in low "Ignored" filed when
calculate PDPT address in PAE mode for guest memory address translation.
Tracked-On: #2561
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove hypervisor.h from per_cpu.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
merge include/arch/x86/irq.h and include/common/irq.h
--> include/arch/x86/irq.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move gva2hva() & hva2gpa() to guest_memory.c,
we will remove hypervisor.h in the future.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
According to SDM 17.3.1.1, for any fault-class exception except a
debug exception generated in response to an instruction breakpoint,
the value pushed for RF is 1.
This patch set Resume Flag for fault class exceptions.
Tracked-On: #2405
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Removed the remaining reference of acrn vm from
inside of vtd.c.
Removed usage of snoopy_mem, and added code to achieve
the same using iommu_snoop.
Initialize iommu_snoop to true in create deault iommu.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
This patch is a modified one. It removes the usage
of acrn_vm struct from inside vtd.c.
It also puts struct iommu_domain inside vtd.h,
from vtd.c.
It modifies the signature of init_iommu_domain
in order to remove dependency on acrn_vm from
inside vtd.c.
Incorporated comments from Jason and Eddie.
Changed the name of sos_vm_domain to
fallback_iommu_domain
Removed any reference of sos_vm from vtd.[c|h]
files, including comments.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
For vcpu.c and vcpu.h,only include some necessary
header files, doesn't include hypervisor.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- now hypervisor.h is the universal set of header file,
this patch doesn't include hypervisor.h, only include
some necessary header files for vm.c and vm.h
-- move 'struct vcpuid_entry' from vm.h to vcpuid.h
-- remove dead code 'enum vm_privilege_level'
-- move 'enum vpic_wire_mode' from vm.h to vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move functions related vmexit from `guest.h` to `vmexit.h`
- move functions related msr from `guest.h` to `msr.h`
- move functions related vm_sw_loader from `guest.h` to `vm.h`
- move function `vmx_vmrun` from `guest.h` to `vcpu.h`
- move MACROs related to vcpu from `guest.h` to `vcpu.h`
- move MACRO `E820_MAX_ENTRIES` from `guest.h` to `e820.h`
- move MACROs related to irq from `guest.h` to `irq.h`
- rename `guest.h` to `guest_memory.h`
Tracked-On: #2503
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use acrn_vm_pci_ptdev_config struct for PCI PT devices configuration
in acrn_vm_config, the only needed configure item is PT devices's
vBDF and pBDF info. When init PT devices, the BDF info will be stored
in pci_vdevs[] of acrn_vm.
With this patch, the previous vpci_vdev_array struct is not needed.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove redundancy code since they are not used now.
-- remove 'max_ram_blk_base' & 'max_ram_blk_size' in
struct e820_mem_params
-- remove 'gpa_lowtop' in struct vm_hw_info
-- remove MACRO 'UOS_DEFAULT_START_ADDR'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The partition mode vm config in vm_description.c is abandoned,
so delete the file. Its related struct in vm.h is also removed;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The previous VM configs array for partition mode is inside struct of
vm_config_partition and named as vm_config_array[], now switch to
global vm_configs[];
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we store the physical pci device info in a global pdev array, the vdev struct can
store a pointer to pdev instead.
Tracked-On: #2431
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Current pt devices bar info for partion mode is hardcoded in
vm_description.c, now we remove the hardcoded info and parse the bar
info during pt devices init.
Tracked-On: #2431
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Tracked-On: #2431
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
- add e820 info in struct acrn_vm;
- rename rebuild_sos_vm_e820() to create_sos_vm_e820();
- add create_prelaunched_vm_e820() for partition mode;
- rename create_e820_table() to create_zeropage_e820() and merge for
both sharing mode and partition mode;
- move create_xxx_vm_e820() to vm.c;
- move create_zeropage_e820() to vm_load.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move e820_default_entries[] from vm_description.c to ve820.c and rename
to ve820_entry[] as a temparary solution for partiton mode e820 management;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_deliver_intr to vlapic_receive_intr: ioapic/msi device
deliver an interrupt to lapic.
Rename vlapic_pending_intr to vlapic_find_deliverable_intr: find a
deliverable interrupt which pending in irr and its priority large than ppr.
Rename vlapic_intr_accepted to vlapic_get_deliverable_intr: get the deliverable
interrupt from irr and set it in isr (which also raise ppr update)
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
CRx 'guest/host mask' is widely used when talking
about CR0/CR4 virtualization in SDM spec,
rename them to 'VMX_CRx_GUEST_HOST_MASK'.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move `vcpumask2pcpumask` from `guest.c` to `vcpu.c`
- move `prepare_sos_vm_memmap` from `guest.c` to `vm.c`
- rename `guest.c` to `guest_memory.c`
Tracked-On: #2484
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When a corresponding IOMMU is found for the device, this patch adds
support to program Interrupt Remapping hardware RTEs and the original
interrupt sources (MSI or IOAPIC) with IR format.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
IOAPIC info from DMAR table is needed to match the IOAPIC info from
MADT. This patch adds support to get id and bus, devfn for IOAPIC
from DMAR. IOAPIC info for SBL platform is hardcoded in the header
file.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
IOAPIC info, specifically ID, is needed to map the IOAPIC to
corresponding DMAR. DMAR table in ACPI has a field that has IOAPIC
ID, that matches the info provided in MADT. Both (IOAPIC info from
MADT and from DMAR) is needed for remapping IOAPIC interrupts.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
As we enable Interrupt Remapping Hardware in ACRN, Queued Invalidation
(QI) needs to be used clear DMAR hardware caches. This patch introduces
Queued Invalidation APIs. Code related to Register based Invalidation
is removed from ACRN and platforms that do not support QI cannot boot
with ACRN after this patch.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
The msr load/restore during vmexit/vmentry is enabled in HV by
default. The profiling has assumption that it's only user for this
feature, which could overwrite of HV default setting.
This fix combine the msr load list for vmexit when profiling.
Tracked-On: #2422
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Since the profiling utilizes the limited size of buffer to capture
sample data, dropping samples could happen while collecting data
if data is generated faster than flushing by consumer. Capturing
the dropped sample info is critical to understand how much the data
is reliable to use.
To capture the information, the new hypercall "PROFILING_GET_STATUS"
is introduced.
Tracked-On: #2474
Signed-off-by: Manisha Chinthapally <manisha.chinthapally@intel.com>
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use smp_call_function() to read/write MSR register on target PCPU
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- add ept.h, and move ept related api declaration
from mmu.h to ept.h
-- move lookup_address()declaration from mmu.h to pgtable.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move 'struct e820_entry' 'E820_TYPE_XXX' from mmu.h
to e820.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move the following files to dm folder
renamed: include/arch/x86/guest/vioapic.h -> include/dm/vioapic.h
renamed: include/arch/x86/guest/vpic.h -> include/dm/vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
1. in UEFI bsp code, not need UEFI macro; it is controlled in makefile.
2. in vm/acpi/interrupt code, unify the API name for SBL & UEFI.
3. remove unnecessary header including and unused code.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- move vm_pic() from vm.h to vpic.c since it is
only used in vpic.c
-- move vm_ioapic() from vm.h to vioapic.c
change vioapic_reset(struct acrn_vioapic *vioapic) -->
vioapic_reset(struct acrn_vm *vm)
then vm_vioapic() is only used in vioapic.c
-- move vm_vuart() from vm.h to vuart.c,
now this api is used in vuart.c and shell.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For VM with local apic pt for realtime scenatios, we support virtio device with PMD backend.
But we still need to inject MSI to notify the front-end, to avoid changing the front-end drivers.
Since the lapic is passed through, irq injection to vlapic won't work.
This commit fix it by sending IPI with vector need to inject.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit extend lapic pass-through for DM launched VM, generally for hard RT scenarios.
Similar to the partition mode, the vlapic is working under the xapic mode at first, only
when x2apic mode is enabled, lapic is passed through, because the physical LAPICs are
under x2apic mode.
Main changes includes:
- add is_lapic_pt() to check if a vm is created with lapic pt or not, to combine
codes of partition mode and DM launched vm with lapic passthrough, including:
- reuse the irq delievery function and rename it to dispatch_interrupt_lapic_pt();
- reuse switch_apicv_mode_x2apic();
- reuse ICR handling codes to avoid malicious IPI;
- intercept ICR/APICID/LDR msr access when lapic_pt;
- for vm with lapic passthrough, irq is always disabled under root mode.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
As we enable Interrupt Remapping, bit positions in IOAPIC RTEs
have a different syntax for programming. ACRN should handle original
format for vIOAPIC as well IR representation for physical IOAPIC.
This patch adds bit granularity IOAPIC RTE.
Tracked-On: #2407
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
As we enable Interrupt Remapping, bit positions in MSI address and
data registers have a different syntax for programming. This patch adds
bit granularity for MSI address and data structs.
Tracked-On: #2407
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- add header file ld_sym.h in include/arch/x86/boot/
-- move 'ld_bss_start/end' from cpu.h to ld_sym.h,
avoid reverse dependency
-- move 'ld_text_end' from mmu.h to ld_sym.h
-- move 'ld_trampoline_load/start/end' to ld_sym.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The sos_vm config under arch/x86/configs/$(CONFIG_BOARD) folder should be
customer specific configuration, leave it back to customer.
When hypervisor start building, it will check whether BOARD specific sos_vm.h
exist in configs/$(CONFIG_BOARD) folder. If exist, then include this header;
if not, then include default sos_vm config header under configs/default folder.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a API to sanitize vm_configs[] array, in this API, we will do sanity
check for VM configurations and refill some fields in vm_configs[]. If
sanity check is failed, the HV would reject to boot.
About pcpu_bitmap of SOS_VM:
We should not hard code pcpu_bitmap for SOS_VM, this is not convenient for
unconfigured boards. The pcpu_bitmap follows a very simple rule:
All physical CPUs except ocuppied by Pre-launched VMs are all belong to
SOS_VM. In this way, the pcpu_bitmap of a SOS_VM is decided by pcpu_bitmap
status in PRE_LAUNCHED_VMs.
To get the correct pcpu_bitmap of SOS_VM, We need to setup another rule, that
the vm_configs[] array should follow the order of PRE_LAUNCHED_VM - SOS_VM
strictly.
With this patch enabled, the pcpu_bitmap field of sos vm config is not needed
to configure;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
after compile, the compiled code could change rsp, so use pure asm code
to avoid such problem which will cause schedule switch failure.
Tracked-On: #2410
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
below fields are defined but not used.
- sync, pause_cnt & dbg_req_state.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The array indexx of "vm_list" may be out of bound.
Updated the size of "vm_list"
Bug: ACRN-2544
Tracked-On: #2385
Signed-off-by: Manisha Chinthapally <manisha.chinthapally@intel.com>
-- fix "Macro parameter not in brackets" for PLUG_CPU(n)
-- fix "Array has no bounds specified" for vm_configs[]
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
This is the following patch after removing pending_pre_work, it make sure
all io emulation is done on its own cpu.
For hv emulated request, it follows the steps:
hv_emulate_pio->emulate_pio_complete
hv_emulate_mmio->emulate_mmio_complete
For dm emulated request, it follows the steps:
acrn_insert_request->dm_emulate_io_complete
while in acrn_insert_request, it could trigger scheduling out then resume by
hcall_notify_ioreq_finish, or busy wait for ioreq completion if polling mode
is enabled.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Now we do not need pending_pre_work anymore, as we can make sure IO request
VCPU resume from where it paused.
Now only three fixed points will try to do schedule:
- vcpu_thread: before vm entry, will check reschedule flag and to it if needed
- default_idle: loop check reschedule flag to see if need switch out
- io request: if IO REQ need DM's handle, it will schedule out
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
this patch added full context switch support for scheduling, it make sure
each VCPU has its own stack, and added host_sp field in struct sched_object
to record host stack pointer for each switch out object.
Arch related function arch_switch_to is added for context switch.
To benefit debugging, a name[] field is also added into struct sched_object.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
To support full context switch scheduling, each physical
CPU must have its own idle sched_obj.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
For binutils <= 2.26:
'U' suffix for unsigned constant is not accepted by binutils assembler.
This patch separates the MACRO definition for ASSEMBLER
and non-ASSEMBLER code in idt.h
Tracked-On: #2200
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
separate the private macro/structure/functions, which are just used
in instr_emul.c;
and move instr_emul.h to public include path.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The member of lapic_pt in acrn_vm_config will be replaced by
guest_flag of LAPIC_PASSTHROUGH;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of bootargs in acrn_vm_config will be replaced by
acrn_vm_os_config struct.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of mem_size and start_hpa in acrn_vm_config struct will
be replaced with the acrn_vm_mem_config struct;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For each vm_array[] item, its config is located in corresponding
index of vm_configs[], so vm_config pointer is not needed any more.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All the legacy cpu configration in vm_description.c are all cleaned up;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will use guest_flags of SECURE_WORLD_ENABLED to check wthether
sworld is supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch creates a new get_sos_vm() api to replace get_vm_from_vmid(0U)
because VM 0 might not be SOS VM now;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pcpu enter guest mode, it will call launch_vms() function to launch
VMs in global vm_configs array.
In launch_vms() function, current pcpu will go through vm_config array list
and check whether it is a bsp of configured VM, if yes then it will prepare
corresponding VM and start it. The index of vm_config array will be specified
to VM id.
The first least significant bit in pcpu_bitmap means the bsp of the VM.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Under sharing mode, VM0 is identical with SOS VM. But the coupling of
SOS VM and VM 0 is not friendly for partition mode.
This patch is a pure term change of vm0 to sos VM, it does not change
any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move this api from ept.c to io_emul.c to avoid
reverse dependency.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
move this api from io_emul.c to vm.c to avoid reverse
dependency
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
to edge interrupt, like eth device, it can triger the interrupt again
when its IRQ in softirq entry queue or in timer list.
in current design, for sofrirq entry, it calls "list_del" before
"list_add_tail", to avoid the entry added twice.
so for interrupt delay timer, add to check if it is started
then just drop the next one; to avoid it enqueue twice.
Tracked-On: #2365
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
mptable pointer in acrn_vm_config struct and also extern struct mptable_vm1/2
declared in mptable.h are not used any more, remove them.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add new struct member for acrn_vm_config;
- add sharing_config.c file with initialized vm_config array;
- add SOS VM config header for apl-mrb/apl-nuc/up2 and dnv-cb2 board;
- and partition_config.c file with dummy vm_config array;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch is a pure term change of vm_description to vm_config,
the struct name of vm_description is changed to acrn_vm_config.
The patch does not change any code logic or senmantic.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. move the CR related code from vmcs/vcpu to vCR source files.
2. also add virtual_cr.h to acrn.doxyfile to avoid doc failure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- Change acrn_vhm_vector to static, only used in io_request.c
-- Add set_vhm_vector() api, it will call this api instead of
acrn_vhm_vector except io_request.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add definitions of all architectural MSRs
- add definitions of majority of non architectural MSRs
The non-architectural MSR definitions are specific to particular CPU model
or family.
e.g. MSR 0xE01 could refer to different MSRs in difference processors, and
in this patch, MSR_R0_PMON_BOX_STATUS is chosen without any particular reasons.
MSR_R0_PMON_BOX_STATUS in Xeon Processor 7500 Series
MSR_C0_PMON_EVNTSEL0 in Xeon E5 V3 family
MSR_UNC_PERF_GLOBAL_CTRL in 6th plus generations Core Processors
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Because ACRN_REQUEST_TMR_UPDATE is not needed anymore, this commit remove
the MACRO definition and its related logic, including following functions:
- apicv_batch_set_tmr()
- vlapic_apicv_batch_set_tmr()
- vlapic_set_tmr_one_vec()
- vioapic_update_tmr()
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit changes the EOI_EXIT_BITMAP as follows:
- add a eoi_exit_bitmap to vlapic structure;
- go through all the RTEs and set eoi_exit_bitmap in the vlapic structure when related RTE fields are modified;
- add ACRN_REQUEST_EOI_EXIT_UPDATE, if eoi_exit_bitmap changed, request the corresponding vcpu to write the bitmap
to VMCS.
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current ACRN implementation update TMR bits one time only when related RTE fields changed,
which is not acting like actual hardware.
From SDM vol3 10.8.4:
"Upon acceptance of an interrupt into the IRR, the corresponding TMR bit is cleared for
edge-triggered interrupts and set for leveltriggered interrupts."
This commit change the ACRN implementation to set/clear corresponding TMR bit when inject
intr to vlapic.
Tracked-On: #2343
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The struct vm_lu_mem_map is not used by code. Remove it.
Also, add bracks () for the variables in macro foreach_vcpu.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
An external object or function shall be declared once in one and only one file.
Since it already declared in include/arch/x86/security.h, we shall remove it.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
The MISRA C stardand do not allow change parameter passed by value
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
120D: Pointer param should be declared pointer to const.
add 'const' qualifier to function signatures when it's possible.
- vioapic_set_irqline_nolock()
- vioapic_set_irqline_lock()
- master_pic()
- vpic_ocw2()
- vpic_ocw3()
- vpic_set_irqline()
- vpic_get_irqline_trigger_mode()
- vm_pic()
- vm_ioapic
93S: Value is not of appropriate type.
change '0' to '0U' in function vpic_icw1().
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Header file shall not be included multiple times.
The following prototype shall be used.
#ifndef INIT_H
#define INIT_H
/* body */
#endif /* INIT_H*/
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
fix
1."Value is not of appropriate type."
2."Function prototype/defn param type mismatch"
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
120D: Pointer param should be declared pointer to const.
Add 'const' qualifier to function parameters whenever it's possible:
alloc_pci_vdev()
enumerate_pci_dev()
pci_scan_bus()
pci_enumeration_cb()
partition_mode_vpci_init()
partition_mode_vpci_deinit()
sharing_mode_vpci_init()
sharing_mode_vpci_deinit()
vpci_cleanup()
45D: Pointer not checked for null before use.
Check pointer vm in vpci_reset_ptdev_intr_info() before using it.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Merge separated mptable.c of BOARDs to unified vmptable.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This is the profiling code cleanup to avoid type conversion
and align tab/space in data structure definition
Tracked-On: #2257
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are the following definitions in hypervisor,
define IOAPIC_INVALID_PIN 0xffU
define VPIC_INVALID_PIN 0xffU
define PTDEV_INVALID_PIN 0xffU
this patch unify them to:
define INVALID_INTERRUPT_PIN 0xffffffffU
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Change the type from uint8_t to uint32_t for shell and vuart
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change the type from uint8_t to uint32_t
-- Remove some typecast
-- Change union source_id
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change the type from uint8_t to uint32_t
-- Remove some typecast
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- Change the type from uint8_t to uint32_t
-- Remove some typecast
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change the type from uint8_t to uint32_t for interrupt pin
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All features controlled by IA32_FEATURE_CONTROL are disabled from guests,
so set the Lock bit to prevent it from writing by guests.
Also hide the MSR_IA32_FEATURE_CONTROL_VMX_NO_SMX bit from guest.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Silicon Debug Feature: CPUID.01H.ECX[11]
- We can't allow guests to have direct access to silicon wide resources.
Machine Check Exception: CPUID.01H.EDX[5]
- Need HV support before exposing it to the guests.
Perfmon and Debug: CPUID.01H.ECX[15]
Debug Store: CPUID.01H.EDX[21], CPUID.01H.ECX[2], CPUID.01H.ECX[4]
- HV emulation is needed to separate host and guest monitoring data.
- guest CPUID.0AH is forced to all-zero in ACRN so it makes sense to clear
these bits as well.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Typedefs that indicate size and signedness should be used in place of
the basic numerical types
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
1. add static for local functions and variables.
2. move vm_sw_loader from vcpu to vm
3. refine uefi.c to follow the code rules.
4. separate uefi.c for vm0 boot and bsp two parts. bsp layer just
access native HW related, can't access vm/vcpu, vm0 boot part can
access vm / vcpu data structure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- Change boot_cpu_data to static, only used in cpu_caps.c,
-- Add get_cpu_info() api, it will call this api instead of
boot_cpu_data except cpu_caps.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- move structure 'cpu_state_info' from cpu_caps.h to host_pm.h
-- add get_cpu_pm_state_info() api
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
SMRR (System-Management Range Register) is disabled from vMTRR,
so treat IA32_SMRR_PHYSBASE and IA32_SMRR_PHYSMASK as unsupported.
IA32_SMBASE is available only when IA32_VMX_MISC[15] is set.
IA32_FIXED_CTR0/1/2 are available only when CPUID.0AH:EDX[4:0] is non-zero.
Intel Processor Trace feature has been disabled and the associated MSRs
need to be in unsupported_msr[] as well.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If a argment is not changed in function, MISRA recommends to add const
qualifier for that argement.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move the debug related command handle into debug/dbg_cmd.c;
so release build will not include that.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add an API to support vuart COM base and irq configured;
2. add the HV cmd to be parsed for vuart COM base & irq.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move CONFIG_COM_IRQ code into vuart, because it is just
used for vuart.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vuart it used for SOS to output log to HV console,
so if dbg uart is disabled, it need be disabled too:
just unregister its PIO.
Tracked-On: 2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) Use __attribute__((packed)) instead of #pragma pack(1)
2) Use the defined data type __packed instead of __attribute__((packed))
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Replace PAGE_SHIFT with MSI_ADDR_DEST_SHIFT in ptirq_build_physical_msi(), since it's not correct in semantics.
Tracked-On: #2209
Signed-off-by: Yan, Like <like.yan@intel.com>
-- Change pcpu_active_bitmap to static, only used in
cpu.c
-- add get_pcpu_active_bitmap()
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Profiling tools are broken, which cause page faults during collection.
The issue happens by enabling SMAP recently. Therefore,
we use stac() and clac() to allow access to buffers allocated by guest.
Tacked-On: #2157
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IO completion polling will access vcpu and vm structs. If doing it in
idle thread, there might be some race issues between vm destroying and
idle thread. They are running on different cores.
Got suggestion from Fengwei, decouple the polling action from idle
thread and just do it in vcpu thread, then we can guarantee idle thread
in really idle status.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Now, need_reschedule will test_and_clear the bit NEED_RESCHEDULE in
schedule context, then call schedule. It is not a exact match with the
name.
This patch move the flag clearing into scheudle, and need_reschedule
just check and return.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Two changes:
1. cpuid leaf 07h has subleaf:
According to SDM 3-194 Vol.2A, Table 3-8, cpuid leaf 07h has sub-leaves.
cpuid.07.eax reports the maximum input for sub-leaves.
Since there is no definition for subleaf > 0 in SDM, hv only supports subleaf 0.
2. In currently hv code, cpuid leaf function 14h is disabled,
CPUID.07H:EBX.INTEL_PROCESSOR_TRACE should be disabled as well.
Tracked-On: #2198
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
this function is not from libc but has the same name,
atoi() in libc is unbounded and not safe.
replace this function with 'strtol_deci()' in this case.
Tracked-On: #2187
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the MISRA-C violations related to mmio_read**
* add `const` qualifier in implementation of mmio_read**
`const` qualifier shall be added
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
- bugfix:the actual 'size' of memory region that
to be updated is incorrect.
- replace CONFIG_UEFI_STUB with DMAR_PARSE_ENABLED
when update memory pages for ACPI_RECLAIM region,
as DMAR_PARSE_ENABLED may be enabled on non-EFI
platform.
V2 update:
wrap roundup to 2M and rounddown to 2M inline
functions.
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- add API get trampoline_start16_paddr() instead
of exporting this global variable.
- other minor update.
Tracked-On: #2095
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch does the following changes
According to VT-d spec Section 6.8 "Write Buffer Flushing" DRAM write buffers
are flushed implicitly upon Remapping Hardware Caches Invalidation even on
platforms that set RWBF to 1 in capability register. So removed write buffer
flushing as current ACRN issues cache invalidation commands in all cases.
Tracked-On: #1855
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Table contents weren't rendered correctly in
developer-guides/hld/hv-io-emulation.html, so
fix the doxygen comments.
Tracked-on: #1684
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Try to minimize the C code in inline assembly function. Now only
construct data structure and return a value is permitted.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
use struct sched_object as the main interface of scheduling, then
make scheduler as an independent module to vcpu:
- add struct sched_object as one field in struct vcpu
- define sched_object.thread for switch_to thread
- define sched_object.prepare_switch_out/in for prepare_switch before
switch_to
- move context_switch_out/context_switch_in into vcpu.c as
vcpu.sched_obj.prepare_switch_out/in
- make default_idle as global idle.thread for idle_thread
- make vcpu_thread as vcpu.sched_obj.thread for each vcpu thread
- simplify switch_to based on sched_object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
just use pcpu_id for make_reschedule_request is enough
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
add struct sched_object, and use it as input param instead of vcpu for
below functions:
- add_to_cpu_runqueue renamed from add_vcpu_to_runqueue
- remove_from_cpu_runqueue renamed from remove_vcpu_from_runqueue
- get_next_sched_obj added to get next sched object
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <edide.dong@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on pointer param should be declared pointer to const.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This adds few functions to access the daata structures
defined inside ioapic.c. Removes the same data structures
from ioapic.h
Also this modifies some of the names of existing APIs to
conform to the ioapic module name.
Modified gsi_table identifier to gs_table_data, to avoid
a MISRA C Violation.
Tracked-On: #1842
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
acrntrace/log kernel modules will use this hypercall to fetch
pcpu num of hardware platform. Then, initialize driver accordingly.
Tracked-On: #1775;#1776
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
-- fix "more than one exit point" and "goto detected" violations
-- change prepare_vm0_memmap to void type
-- Add free_vm_id when create vm failed
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1) Fix procedure has more than one exit point.
2) Add some brackets to make logical conjunctions more readable.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now one macro is added to define the alignment requirement.
>#define __aligned(x) __attribute__((aligned(x)))
Some code uses the __aligned(x) to define the alignment while the other
code uses the original alignment definition.
So they are unified.
Tracked-On: projectacrn/acrn-hypervisor#2131
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the MISRA-C violations on implicit type conversion.
For ptirq vpin source type, there is no need to define a enum.
Remove enum ptirq_vpin_source.
Define two macro:
- PTDEV_VPIN_IOAPIC
- PTDEV_VPIN_PIC
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch moves `atoi` and `strtol_dec` to debug directory
since they are only used by code under debug directory.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the MISRA-C violations in lib/string.c
* add the required brackets for logical conjunctions
* replace the basic type `long` with defined type `int64_t`
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit fixed following violations:
- Procedure has more than one exit point: free_irq_vector/request_irq/dispatch_interrupt
- goto detected: dispatch_interrupt
- Pointer param should be declared pointer to const: fixup_idt
- basic type declaration used: fixup_idt
Tracked-On: #861
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixs MISRAC violations in common/ptdev.c and include/common/ptdev.h
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Gloabal variable should be declared constant wherever possible to avoid unintentional
modification.
Tracked-On: #861
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MIRSA-C requires the const qualifier should be applied to pointer parameters
that address data not subject to change in rule 120D.
Tracked-On #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. move out vm related code from arch/pm.
2. remove unnecssary global variables.
3. keep the global variables as static, not used
by other modules directlly.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
78D: Global variable should be declared const.
Global variables should be declared constant wherever possible to
avoid unintentional modification.
27D: Variable should be declared static
pci_ops_vdev_msi is not accessed by other files. Remove the declaration
from the header and define it with the static qualifier; Because it's
referenced by populate_msi_struct(), so move the define statements forward.
33D: No real declaration for external variable
certain variables are available in sharing mode or partition mode only,
so that the declarations in header files must be enclosed with
CONFIG_PARTITION_MODE
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- fix MISRA-C violation "procedure has more than one exit point"
for this api
-- change start_vm to void type since it is always return 0
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
No one uses it and it's some duplicated with strchr.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
add get_ibrs_type API to get ibrs type.
this patch fix Misra C violation:
filename:/hypervisor/arch/x86/security.c function:None offset:19:
reason:Variable should be declared static. : ibrs_type
Tracked-On: #861
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
there are still some security related funcs in cpu_caps.c & cpu.c,
move them out into security.c.
Changes to be committed:
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: arch/x86/guest/vcpu.c
new file: arch/x86/security.c
modified: arch/x86/trusty.c
modified: arch/x86/vmx_asm.S
modified: include/arch/x86/cpu.h
modified: include/arch/x86/cpu_caps.h
modified: include/arch/x86/per_cpu.h
new file: include/arch/x86/security.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
- we should not use print function before tsc setup
- is_ept_supported is internal API
- add is_apicv_supported to check apicv feature
- rename some functions to verb+obj format or better name
Changes to be committed:
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: include/arch/x86/cpu_caps.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
has_monitor_cap is more suitable name
v2:
- rename to has_monitor_cap
Changes to be committed:
modified: arch/x86/cpu.c
modified: arch/x86/cpu_caps.c
modified: include/arch/x86/cpu_caps.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move cpu caps related functions like capability init/detect/check
in cpu.c & mmu.c into a new file cpu_caps.c
Changes to be committed:
modified: developer-guides/hld/hv-memmgt.rst
modified: ../hypervisor/Makefile
modified: ../hypervisor/arch/x86/cpu.c
new file: ../hypervisor/arch/x86/cpu_caps.c
modified: ../hypervisor/arch/x86/mmu.c
modified: ../hypervisor/arch/x86/vmx_asm.S
modified: ../hypervisor/include/arch/x86/cpu.h
new file: ../hypervisor/include/arch/x86/cpu_caps.h
modified: ../hypervisor/include/arch/x86/guest/vm.h
modified: ../hypervisor/include/arch/x86/mmu.h
modified: ../hypervisor/include/arch/x86/vmcs.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use enhanced rep fast-string operation to refine memcpy_s.
And assume that the destination and the source would not overlap.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For security, this patch add one flag per vm and disable snoop control
for sos and enable snoop control for uos by default.
v2: add one flag in vm, not in iommu domain.
v3: add vm null check
Tracked-On: #2086
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
13X: Identifier reuse: tag vs component.
A tag name shall be a unique identifier
Change the following names:
struct msi --> struct pci_msi
struct msix --> struct pci_msix
struct vpci --> struct acrn_vpci
union cfgdata -> union pci_cfgdata
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vmx.c should only take care host vmx operations, which should not
contain vcpu reference, so refine vmx on/off APIs, move out use
of vcpu by adding one per cpu vmcs_run pointer.
as now each pcpu only run on one vcpu, so just keep running vmcs
in per cpu vmcs_run pointer is enough.
Changes to be committed:
modified: arch/x86/cpu.c
modified: arch/x86/init.c
modified: arch/x86/pm.c
modified: arch/x86/vmcs.c
modified: arch/x86/vmx.c
modified: include/arch/x86/per_cpu.h
modified: include/arch/x86/vmx.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove no need included header files and macro definitions
Changes to be committed:
modified: arch/x86/vmcs.c
modified: include/arch/x86/vmcs.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
one part is pure vmx operations which keeps in vmx.c
the other part is vmcs operations which is vcpu related, move them
into vmcs.c
Changes to be committed:
modified: Makefile
copied: arch/x86/vmx.c -> arch/x86/vmcs.c
modified: arch/x86/vmx.c
modified: arch/x86/vmx_asm.S
modified: include/arch/x86/hv_arch.h
new file: include/arch/x86/vmcs.h
modified: include/arch/x86/vmx.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
By switching AP wakeup from broadcast to one by one, we could
set correct stack for each AP and drop the temp stack used during
AP boot.
Tracked-On: #2034
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
there is no need to clear CR4.TSD as there is no user mode
in ACRN hypervisor.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
36D Prototype and definition name mismatch
pci_scan_bus() and sharing_mode_find_vdev() wrong parameter in prototype.
14D Attempt to change parameter passed by value.
vmsix_table_rw() uses function parameter as local viarable.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
106D No prototype for non-static function.
2 functions missing prototyle declarations in header file.
120S Use of bit operator on signed type.
123S Use of underlying enum representation value.
enum values are treated like unsigned integer in vmsr.c
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
With SMAP enabled, hypervisor can't access pages that
owned by guest(either SOS or UOS), and an override is
is provided: stac()/clac() to enable/disable access to
guest's memory pages.
Pre-conditon:
Mark hypervisor owned pages as supervisor mode (U/S = 0),
and set all othter memory pages as user mode (U/S = 1).
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MTRR emulation belongs to virtual CPU component.
- rename mtrr.c to vmtrr.c and move it to arch/x86/guest
- rename mtrr.h to vmtrr.h and move it to include/arch/x86/guest
Tracked-On: #1842
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Intercept IA32_TSC_ADJUST MSR so that writing IA32_TSC_ADJUST from the
guests won't impact the TSC in root mode or potentially other vCPUs in
the same pCPU.
- MSR TSC_ADJUST needs to be isolated between normal and secure world,
so it's included in NUM_WORLD_MSRS.
- Upon writing to either IA32_TSC_ADJUST or IA32_TSC from the guests,
don't write to physical MSRS so it won't impact the host side, but
update the TSC offset VM-execution control.
- don't need to intercept rdmsr for IA32_TIME_STAMP_COUNTER.
- add the missing statement in save_world_ctx() to save the tsc_offset
during world switch.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
hypervisor initilization component triggered by boot component,
and it calls different components initilization functions from
the highest layer.
this patch added init.c and move reorged cpu init functions into
it, keep hardware management functions in cpu.c but move other
components' init function into init.c.
the hypervisor initilization components will call:
- init_cpu_pre
- init_cpu_post
- init_bsp
- init_debug_pre
- init_debug_post
- init_guest
- init_passthru
- enter_guest_mode
the hypervisor initilization component include files:
arch/x86/init.c
include/arch/x86/init.h
this component is higest layer, so there is no reverse dependencies for it.
v2:
- separate into 2 patches, 1 for reorg, 1 for pure move.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
This patch fixes incorrect vm_id captured when sampling PMU data. Currently,
the vm_id gets attributed to ACRN hypervisor, rather than actual guest vm_id.
The issue is identified that the existing code captures the guest vm info
after vmexit_hander function is completed, in which the profiling module
points its context to VMM. When the vmexit happens by PMI, the guest context
should be captured so that the attribution to proper guest vm can happen.
This change will also allow to capture more accurate TSC when vmexit happens.
Tracked-On: #2043
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
functions like set_vcpuid_entries & guest_cpuid should only
server for virtual cpuid, so move such kind of functions
to guest/vcpuid.c.
and all native cpuid APIs will keep in cpuid.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- enable NX feature in hypervisor:
1. Set 'XD' bit for all pages, including pages for guests
when initialize MMU tables in hypervisor.
2. remove 'XD' bit for pages that contain hypervisor instructions.
3. enable MSR EFER.NXE,which will enable page access restriction by
preventing instruction fetches form pages with XD bit set.
- remove "-Wl -z noexecstack" GCC flag option in hypervisor
Makefile as it would not affect stack attribute in hyervisor,
which setup stack itself, instead of by loader.
Tracked-On: #1122
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. change its APIs as more indepentent, and modify the callers' code
2. limit its global variables as static, and return const to the callers
3. remove unused code in "CONFIG_CMA"
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1. e820 is modulized as separated files.
2. move boot_regs into multiboot.h as it's related with
multiboot info header
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
based on previous patch, we can move idt.S and idt.h out of boot component
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently there are two fields in ext_context to emulate IA32_PAT MSR:
- ia32_pat: hold the value of the emulated IA32_PAT MSR
- vmx_ia32_pat: used for load/store IA32_PAT MSR during world switch
This patch moves ext_context->ia32_pat to the common placeholder for
emulated MSRs acrn_vcpu_arch->guest_msrs[].
Also it renames ext_context->vmx_ia32_pat to ext_context->ia32_pat to
retain same naming convention in struct ext_context.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- implement unified APIs to access guest_msrs[] under struct acrn_vcpu.
- use these new APIs to read/write emulated TSC_DEADLINE MSR
- switch world_msrs[] and guest_msrs[] during world switch for MSRs that
need world isolation
- remove the old guest_msrs[] array and it's index macros.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Create two arrays for emulated MSRs:
- guest_msrs[] in struct acrn_vcpu_arch: emulation for all MSRs that are
included in emulated_guest_msrs[].
- world_msrs[] in struct cpu_context: it has separate copies for secure and
normal world for those MSRs that are in the first NUM_WORLD_MSRS entries
in emulated_guest_msrs[].
Split vmsr.c/emulated_msrs[] into 3 smaller arrays:
- emulated_guest_msrs[]: corresponding MSRs are emulated in guest_msrs[]
- mtrr_msrs[]: emulated MTRRs are saved in vMTRR module
- unsupported_msrs[]: GP for any guest accesses
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Identifier reuse may arise confusion. So should minimize the case of it
as much as possible. This patch is try to do this except the PCI related
module.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
On platforms, that do not support APICv register virtualization, all the
x2APIC MSRs need to intercepted by ACRN for emulation.
Tracked-On: #1973
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch does:
- remove the unused API declaration
- fix use of uninitialized variable in instr_emul.c
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds more comment to describe functions that are
interfaces to the other modules in the hypervisor. The comments
are in doxygen-style for document generation.
Tracked-On: #1595
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
This patch adds the necessary space before or after binary operator.
v1 -> v2:
* minor fix related to integer
[i - 1] ====> [i - 1U]
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Input parameter of mmio_write64/mmio_write32/mmio_write16/mmio_write8
should be 'void *addr' rather than 'const void *addr' since the object
pointed by 'addr' is modified in these operations.
This patch change the param type of mmio_write** and update its usage
accordingly.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
replace CPU_PAGE_MASK with PAGE_MASK
These two MACROs are duplicated and PAGE_MASK is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- replace CPU_PAGE_SHIFT with PAGE_SHIFT
These two MACROs are duplicated and PAGE_SHIFT is a more
reasonable name.
- remove unused MACROs related to page shift in cpu.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
separate the function definitions into debug/release directories
to better distinguish debug/release libraries
v1 -> v2:
- sbuf_get is defined in 'debug/sbuf.c' but not used anywhere.
remove the declaration in 'include/debug/sbuf.h' and keep the
definition in 'debug/sbuf.c' in case it will used later.
- sbuf_put and sbuf_share_setup is not used under RELEASE version.
remove the file 'release/sbuf.c'.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
serial PCI device is just used for HV/SOS output debug information;
because it is used in hypervisor layer, SOS should not touch it.
so need to check and hide it from SOS.
Tracked-On: #1923
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
