resize vm_config buffer from 16KB to 32KB, as 16KB
is not enough on EHL platform, which will result in
crash when accessing this memory.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
This patch prepares vRTCT for post-RTVM instead of
pass-thru native RTCT:
- Configurations are based on Service VM native RTCT.
- Remap vLAPIC IDs in vRTCT.
- Remap base address of SW SRAM memory regions
from HPA to GPA.
- HPA base of Software SRAM shall be parsed from PTCT
instead of hardcoding.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch add function 'vm_get_config()' to get
configuration information for current VM from hypervisor.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
We don't reserve PCI MMIO in e820 Table, it's included in DSDT ACPI Table.
About 0xA0000 - 0x100000 entry, we don't have any ACPI Table touch this region.
So we could remove it too.
After this change, we could only pass the reserved e820 table which we must
reserve to OVMF. In this case, the OVMF could trust ACRN-DM and pass the
reserved e820 table to guest instead of dropping it.
This patch needs the corresponding modify in OVMF. Otherwise, the guest could
not boot.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add Null pointer check in init vq ring and add vq ring descriptor
check in case cause Nullpointer exception.
Tracked-On: #5355
Signed-off-by: Liu Long <long.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Add IC_CREATE_DEVICE and IC_DESTROY_DEVICE ioctls to create and
destroy an emulated device in hypervisor
v3: change IC_CREATE_DEVICE and IC_DESTROY_DEVICE to IC_CREATE_HV_VDEV
and IC_DESTROY_HV_VDEV
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add two hypercalls to support MMIO device pass through.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
- re-arange the code to make static code analysis tool happy.
- If no valid conversion could be performed, a zero value is returned
(0L) from strtol(), so add a sanity check "isdigit(cp[0])" to ensure
that it won't unexpectedly parse CPU 0 if the string starts or ends
with the valid delimiters ',' or '-', for example:
-- cpu_affinity 1,
-- cpu_affinity ,1
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
add logs for vm state transition to help
analyze some problems.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
User has a chance to specify VCPU affinity through acrn-dm command line
argument. Examples of the command line:
3 PCPUs: 1/2/3
--cpu_affinity 1-3
5 PCPUs: 2/3/6/7/8
--cpu_affinity 2,3,6-8
8 PCPUs: 2/3/6/7/9/10/11/12
--cpu_affinity 2,3,6-7,9,10-12
The specified pCPUs must be included in the guest VM's statically
defined vm_config[].cpu_affinity_bitmap.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
If the guest is RTVM, dm process exit doesn't mean RTVM is
shutdown. Only shutdown_vm in hypervisor guarantee RTVM is
shutodwn. So we should avoid touch guest memory content
from DM if the guest is RTVM.
Tracked-On: #4428
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add assign/deassign PCI device ioctl APIs assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current design has the following problem:
gvt uses some pci bar regions,
but ACRN-DM isn't aware of these regions.
So ACRN-DM may allocate these regions for other pci devices,
which will result in other pci devices bar regions
overlap with gvt bar regions.
The new design is the following:
(1) ACRN-DM reads gvt bar regions
which are provided by physical gpu;
(2) ACRN-DM reserves gvt bar regions
v6 -> v7:
* use array to store reserved bar regions
* rename some struct and func
v5 -> v6:
* rename enable_gvt to gvt_enabled
* add a interface to reserve bar regions
* reserve gvt bar regions
Tracked-On: projectacrn#4005
Signed-off-by: Junming Liu <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Liu XinYun <xinyun.liu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Now, we pre-define VM configuration statically in HV. So HV can create
vcpus instead of DM when VM create.
This patch get the created vcpu_num from HV. vm_create_vcpu can be
removed later if kernel can get vcpu_num correctly without
IC_CREATE_VCPU ioctl.
v4: Keep vm_create_vcpu in DM for compatbility. We might remove it when
kernel is ready.
Tracked-On: #3663
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
cleanup 'assert' to avoid possible software vulnerabilities
Tracked-On: #3252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
also add "\n" in the end of each log.
Tracked-On: #3012
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
ACRN interepts vm_set/reset_ptdev_intx_info hypercalls to set
the SOS vdev properties to indicate it is assigned to UOS. Today,
upon vm_reset_ptdev_intx_info hypercall ACRN does not revert the SOS
vdev properties back to that of SOS, as vbdf and pbdf were not
part of the API. This would leave ACRN data structures in an incorrect
state
Tracked-On: #2700
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The code mixed the usage on term of UUID and GUID, now use UUID to make
code more consistent, also will use lowercase (i.e. uuid) in variable name
definition.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch add one new parameter --rtvm to indicate if the guest is a RTVM or not.
For RTVM, it may be not interference by SOS.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This flag indicates that if the vm is RTVM.
And if a vm has GUEST_FLAG_LAPIC_PASSTHROUGH flag set,
we must set the GUEST_FLAG_RT at the same time.
Tracked-On: #2865
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
devicemodel/include/public/acrn_common.h should be identical with
hypervisor/include/public/acrn_common.h, so we can use a soft link
to hypervisor's acrn_common.h for devicemodel.
Tracked-On: #2851
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Physcial bdf is needed in hypervisor to find the right pci dev.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
1G PCI hole is added just after 4G address which is used as the
PCI high MMIO address space. Guest high memory is mapped from 5G
address for both EPT and device model user space address. Guest
e820 table and API vm_map_gpa are updated accordingly.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
New option "--lapic_pt" added to create VM with local apic passthrough, for
realtime scenarios.
When the option is set, a VM is created with LAPIC_PASSTHROUGH.
The option is not set by default.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently VHM driver is opened by using the device file of /dev/acrn_vhm.
But for the upstream purpose it is renamed to /dev/acrn_hsm.
So we need to check that the device file is acrn_vhm or acrn_hsm and then
open the VHM driver.
Tracked-On: projectacrn/acrn-hypervisor#2356
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
VHM will provide a ioctl to clear all IO requests' status. This is
useful to handle ioreqs in VM normal reboot and emergency reboot.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Generic infrastructure for loading BIOS/ROM and providing EPT pages at
High BIOS region.
The size of High BIOS is rounded up to a multiple of 2MB.
v2 -> v3:
- refine mmap_hugetlbfs* to reduce code replication
v1 -> v2:
- make this code generic instead of OVMF-specific
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
this patch fixes such an information leaking issue:
in case that after a UOS is destroyed, its memroy
will be reclaimed and maybe re-allocated for a new UOS,
then the previous UOS sensitive data in memory may
be leaked to the new UOS.
Tracked-On: #1825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remove ASSERT & DEASSET IRQ line IOCTLs
- remove PULSE IRQ line IOCTLs, use set/clear
IRQ line instead.
- Use IC_SET_IRQLINE to set or clear IRQ line
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add ioctl parameter and API to set vcpu regs. The guest software
loader will call this API to set guest vcpu registers.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch depends on a vhm patch merged, "vhm: setup ioreq shared buf
in IC_CREATE_VM ioctl". We intend to combine VM creating and ioreq
shared page setup into one step. For compatibility issue, we need follow
the patch dependency to merge accordingly.
This patch also drops vm_open/vm_close which will be intergrated into
vm_create/vm_destroy.
Tracked-On: #1330
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ioeventfd and irqfd support for vhm was introduced in kernel vhm module.
We provide the interfaces of them for DM users.
Tracked-On: #1329
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is for "interrupt storm mitigation", used to reduce
the effect on SOS if an "interrupt storm" happens in UOS.
Add a monitor thread to get UOS pass-through devices interrupt
freqency data; currently, if "interrupt storm" happens, it'll
send a command to delay interrupt injection to UOS for some time.
The parameters: interrupt storm threshold and delay time can be
adjusted according differt HW configure and use case.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Unmap ptdev BAR when deinit to comply with native system, who zap out
all pre-allocated BARs.
Tracked-On: #1146
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
this patch fixes such an information leaking issue:
in case that after a UOS is destroyed, its memroy
will be reclaimed and maybe re-allocated for a new UOS,
then the previous UOS sensitive data in memory may
be leaked to the new UOS.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
