1. virtio_mei structure represents an instance of mei device.
2. vmei_me_client represents an ME application in the MEI FW.
3. vmei_host_client represent a host application talking to the
ME application, ME application can support multiple connections.
4. Add debug helpers
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The virtio has two virtio queues, TX and RX.
TX have two segment buffers one for header and one for data.
The virtio_mei declares host buffer of size 128 slots, each
slot is a 4 bytes value.
For synchronization hw_ready and host_reset configuration flags
are used that emulates mei reset flow.
And last fw status registers must be also readable via virtio
mei device.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
mei handles objects on the list, hence reference counting
infrastructure is required for easier multithreading.
Tracked-On: #1536
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
libuuid sports only uuid (big endian encoding),
though mei requires guids (little endian encoding).
The base types are based on <linux/uuid.h> header.
Tracked-On: #1536
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch is one workaround to resolve a crash issue for certain brand
touch screen (eGalaxTouch EXC7200-7368v1.01). The formal fix should
follow the xHCI spec to stop xfer and generate transfer completed event
trb prior to Stop Endpoint Command complete event trb. It should be a
big change and for short term, do nothing for the stop endpoint command
which is no other side effect be observed so far.
Tracked-On: #1413
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The function pci_xhci_get_native_port_index_by_path didn't
compare the bus number during the process of native USB
device searching. This patch is used to fix it.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
To support the multiple hubs and multiple layers of hub, the
port_map_tbl should be replaced by native_ports to record all
native devices' state, including assignment state, emulation
state etc.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are many places in USB emulation implementation to get
native USB device infomation, and the related codes are long
and repeated many times. This patch introduces function
usb_get_native_devinfo to remove redundent codes for the
purpose mentioned above.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch introduce struct usb_devpath to indentify uniquely an USB
device, which is basic element for multiple hub support.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Previous design use bus and port(root hub port) for the identification
to the native USB device. It cannot work properly under the multi-hub
situation due to external USB hub is introduced.
This patch removes old hub implementation code, and subsequent patches
will be add support for mutiple hubs.
Tracked-On: #1434
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
As RPMB mux kernel module is going to be created,
there are two corresponding changes required for DM:
1. The name has been changed to /dev/rpmbmux.
2. DM does NOT check MAC of RPMB result returned by kernel
module because DM doesn't own the real key.
Tracked-On: #1508
Signed-off-by: Huang, Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Per i6300esb spec, when WDT_INT_TYPE(bit 0 and 1 of WDT config register)
are set to 00, IRQ feature should be supported.
The WDT_INT_ACTIVE bit is set when the first stage of the 35-bit
down-counter reaches zero. An interrupt will be generated if WDT_INT_TYPE
is configured to do so (See WDT Configuration Register). This is a sticky
bit and is only cleared by writing a 1.
SMI feature(WDT_INT_TYPE are set to 0x10) is not supported.
Tracked-On: #1498
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch addes the debugexit function to DM. If it's enabled
by DM cmdline (by add --debugexit), the guest could write a
32bit value to port 0xF4 to trigger guest shutdown.
Tracked-on: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current RTC emulation is based on sigevent mechanism, replace with
acrn_timer API which based on timerfd/epoll mechanism to avoid
potential resource accessing conflict in the async thread.
Tracked-On: #1489
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
In the current implementation sigev_notify is configured as
SIGEV_THREAD. When wdt expires an async thread is created and
the registered timer callback is called in the context of this
thread, then the watchdog interrupt emulation would require the
thread to assert intr on this pci dev.
There would be a race condition that when the wdt pci device is
freed in pci device deinit and then a timer expires. In this case
the wdt expired thread will access a freed buffer which would cause
problem such as heap corruption and segment fault.
In this patch we replace timer API with acrn_timer which is based
on timerfd/epoll mechanism to avoid the race condition.
Tracked-On: #1489
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This patch resolves acrn-dm crash issue when acrnd boots up the acrn-dm.
The rootcause is mevent_enable and mevent_disable have NULL pointer as
its parameter if uart backend is not tty capable, so add check code for
the uart backend before invoking mevent_enable and mevent_disable.
The issue can be reproduced when acrnd boots up the acrn-dm.
Tracked-On: #1466
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
VirtIO v1.0 spec 04 5.2.5:
- Protocol unit size is always 512 bytes.
- blk_size (logical block size) and physical_block_exp (physical block
size) do not affect the units in the protocol, only performance.
VirtIO v1.0 spec 04 5.2.6.1:
- A driver MUST NOT submit a request which would cause a read or write
beyond capacity.
Reject the requests that violate these terms.
v1 -> v2:
- add more comments for clarity
Tracked-On: #1422
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There is no GEOM framework in Linux. Remove dead code.
v1 -> v2:
- complete removal of the entire GEOM logic
Tracked-On: #1422
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
NHLT table contains the settings some audio drivers need.
An ACPI method is used to get NHLT table address & length.
In current DM code, the NHLT talbe length in the ACPI method
is hardcoded, which will cause troubles when the length of the
table changed.
This patch replaces the hardcoded NHLT table length according to
the table length read from SOS.
Tracked-On: #1461
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
The write_dsdt_xhci function is use for describe the xdci dsdt table.
Correct its name.
Tracked-On: #1444
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
movb is used for registers STATUS and CFGGENERATION whose size is 1
byte. Previously hv cannot report the correct MMIO trap size for
movb and virtio hard coded their size to 4 as a workaround. hv fixed
movb instruction emulation and MMIO size can be reported correctly.
This patch removes those workaround.
commit 9df8790ffc ("hv: Fix two minor issues in instruction emulation code")
Tracked-On: #1449
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Add a function to do msix table deinit.
1. call api to reset msix entry in hypervisor
2. free virtual msix table memory
3. unmap pba page if any
4. unmap the pages passhtru to uos in MSIX BAR if any
Tracked-On: #1222
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Normally, for devices support MSI-X, PBA is passed-through to guest.
However, PBA and MSI-X table share the same bar, and part of PBA and
MSI-X table may share a same page for some devices.
If that is the case, the part of PBA within the page should be emulated
rather than passed-through.
This patch adds PBA emulation support for MSI-X.
Tracked-On: #1222
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This is an issue result from incomplete process logic of commit:
"ba68bd4 DM USB: xHCI: fix enumeration error after rebooting".
This patch is used to fix it.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1425
The patch resolves a bug that signal SteeringWheelSpeechCtrlBtn can not be
received in UOS. the rootcause is signal SteeringWheelSpeechCtrlBtn and
signal SteeringWheelPauseBtn are combined into one multi-signal message and
signal SteeringWheelPauseBtn is not defined.
To fix this, add SteeringWheelPauseBtn definition.
Tracked-On: #1410
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vPIT is used as a source of system timer by UEFI (e.g. OVMF).
This is ported from Bhyve, with a few changes:
- move to user space, using POSIX timer
- support timer mode 3
- improve the emulation of OUT and STATUS byte
- improve the emulation of counter behavior
- improve the emulation of CE update in periodic mode
- treat CR == 0 as 0x10000
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 283291
Purpose: Adding vPIT support.
Maintained-by: External
Tracked-On: #1392
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
According to PCI spec 3.0 section 6.2.2 "Device Control", guest
could write the command register to control device response to
io/mem access.
The origial code register/unregister the memory range which is
not suitable because it can't handle the sequence:
1. disble the device response to specific memory range
2. reboot guest (DM will try to free the memory range which
was freed in step 1 already)
Tracked-On: #1277
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some firmware (e.g. UEFI) uses RTC CMOS to fetch the system's memory
configuration. Put lowmem / highmem info in the designated area.
This is a port of Bhyve vRTC's user-space logic.
v1 -> v2:
* move KB/MB/GB to macros.h
* move nvram offset definitions to rtc.h
Tracked-On: #1390
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When the physical USB device is disconnected before DM's emulation
is ready, the virtual connection state is not cleared properly. This
will cause the DM refuse to do emulation for future physical connection.
This patch clears those states mentioned above and hence fix the issue.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1367
When USB hub is disconnected, its connection status is not cleared
in the DM, this defect will cause the related assigned port could
not be used any more.
This patch is used fix this issue.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1365
Previous implementation binds libusb (in other words: usbfs) with
native device when DM receives the Enable Slot command. But according
to xHCI spec 4.6.5, the binding relationship is decided when the
Address Device command is received, so this implementation is not
consistent with hardware behaviors.
And this incompatible could induce following issue. When two or more
USB devices are connected at the same time, eg, connecting two devices
before Guest OS is booted, the virtual slot id may bind to wrong root
hub port.
This patch will do the binding when Address Device command is received
and related issues will be fixed.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1366
According to xHCI spec, the Stop Endpoint command should execute
no matter the endpoint is in halted state or not, but current
implementation just refuse do the command and return error to
Guest OS. It is wrong and this patch is used to fix it.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1366
One additional command parameter is added for virtio-net to support
vhost net. The command line for vhost net is as follows:
-s n,virtio-net,tap_xxx,vhost
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost proxy interacts with vhost kernel thru vhost char dev. Internal
interfaces are implemented based on ioctls of vhost char dev in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are 2 eventfds for one virtqueue, one is for kick and the other
is for notify. eventfd used for kick is associated with a PIO/MMIO
region. eventfd used for notify is associated with a MSIx/INTx. The
eventfd pair is registered to VHM thru VHM char dev.
VHM irqfd currently only support MSIx. If INTx is used, vhost proxy
uses mevent to poll the call fd from vhost then inject interrupt to
guest.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost kernel driver needs the information of memory mapping between
GPA and the virtual addresses in device model process. This is
required for virtqueue related operations. This patch gets memory
mapping information from vmctx then conveys to vhost.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost_vq related interfaces are implemented in this patch. They are
vhost_vq_init/vhost_vq_deinit/vhost_vq_start/vhost_vq_stop.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds the vhost support to the device model virtio. A vhost
proxy is implemented based on the virtio framework and vhost char dev.
Key data structures and external interfaces are implemented in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
