smbios table is not required so remove it.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Guest OS (e.g. Linux) may rely on a gap in E820 map in the 32-bit memory
space to determine the MMIO space for its PCI devices. Leave this gap
when building E820 map to keep the guest's PCI subsystem working.
After commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e, Linux kernel no
longer requires the MMCONFIG region to be reserved in the E820 map.
Nonetheless, keep it in the reserved region to be on the safe side.
Tracked-On: #2843
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
OVMF requires a more descriptive mechanism than RTC CMOS to retrieve
ACRN's memory layout, so we now pass the E820 map to it, starting at
0xEF000 (ROM area).
ACRN currently uses [4GB, 5GB) as its 64-bit PCI host aperture. This is
inconsistent with OVMF's assumption of its platform's memory layout,
because it derives the size of high memory from RTC CMOS, which is
incapable of describing the 64-bit PCI hole.
By default, OVMF uses RTC CMOS 0x5b/0x5c/0x5d to determine the size of
high memory. This value only tells OVMF how much memory is above 4GB,
but not the platform's memory layout above 4GB.
Using RTC CMOS works for QEMU, because QEMU places its 64-bit PCI host
aperture above its highmem. Therefore, OVMF can always assume highmem is
located at [4GB, 4GB + highmem), which is not where ACRN's highmem is
located. For example, if we have 1GB of usable memory above 4GB, ACRN
will place it at [5GB, 6GB).
This change allows OVMF to correctly identify the guest's memory layout.
It will consider any reserved region above 4GB as 64-bit PCI host
aperture.
MP table, SMBIOS and ACPI tables are all located above 0xF0000 so it is
guaranteed that there is no overlap. There can only be a maximum of 128
E820 entries.
v1 -> v2:
- provide more explanation to this commit
- add signature before E820 map for OVMF backward compatibility
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
While building the E820 map for UOS, [lowmem, lowmem_limit) and [5GB,
highmem) can be empty. Remove the empty entries if they appear.
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
- fix comments
- update the first RAM region to [0, 0xA0000) because [0xA0000, 1MB) is
designated as video memory and ROM area
- use 2GB as lowmem_limit
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
- use strncmp() instead of comparing string pointers to make no
assumptions about the toolchain's literal pool
- re-shuffle the functions so they're consistent with mem.h
- make non-public functions static
- increase code re-use
Tracked-On: #2792
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Physcial bdf is needed in hypervisor to find the right pci dev.
Tracked-On: #2788
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
There was a workaround in DM that allocates PCI 64bit mem bar in 32bit mem space
if the bar size is within 32MB.
After the workaround being removed, there is an issue to enter fastboot
mode for inappropriate handling of 64bit mem bar in guest driver.
The patch bring the workaround back, and skip the workaround when the guest
is booted by OVMF.
Revert the patch after the guest fixs the issue of handling 64bit mem bar in
fastboot mode.
Tracked-On: #2677
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1G PCI hole is added just after 4G address which is used as the
PCI high MMIO address space. Guest high memory is mapped from 5G
address for both EPT and device model user space address. Guest
e820 table and API vm_map_gpa are updated accordingly.
Tracked-On: #2577
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
New option "--lapic_pt" added to create VM with local apic passthrough, for
realtime scenarios.
When the option is set, a VM is created with LAPIC_PASSTHROUGH.
The option is not set by default.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- don't generate io apic entry for vm with lapic pt.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
vHPET is used as a source of system timer by UEFI (e.g. OVMF).
This provides an alternative to using vPIT, which OVMF assumes is always
connected to vPIC.
This is ported from Bhyve, with a few changes:
- move to user space, using acrn_timer
- enable timers only when necessary
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 326257
Purpose: Adding vHPET support.
Maintained-by: External
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It is possible for multiple timeouts to occur in one mevent epoll
iteration. Providing the number of timer expirations to the timer
callback handlers can be useful. E.g., this could improve emulation of
timing-sensitive hardware components.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Allow specifying the initial expiration in absolute time.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
It was designed to be used in non-blocking mode to prevent the mevent
thread from blocking itself indefinitely, but it was created in
blocking mode.
Tracked-On: #2319
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently VHM driver is opened by using the device file of /dev/acrn_vhm.
But for the upstream purpose it is renamed to /dev/acrn_hsm.
So we need to check that the device file is acrn_vhm or acrn_hsm and then
open the VHM driver.
Tracked-On: projectacrn/acrn-hypervisor#2356
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
We will mark ioreq as COMPLETE in VHM via IC_NOTIFY_REQUEST_FINISH
ioctl. vm_notify_request_done can do it. So remove this one.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VHM will provide a ioctl to clear all IO requests' status. This is
useful to handle ioreqs in VM normal reboot and emergency reboot.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Also remove the '\n' from the hugetlb's file name.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
The patch fix some string operations issues and also improve readability
of several snippet.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Now one macro is added to define the alignment requirement.
>#define __aligned(x) __attribute__((aligned(x)))
Some code uses the __aligned(x) to define the alignment while the other
code uses the original alignment definition.
So they are unified.
Tracked-On: projectacrn/acrn-hypervisor#2131
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When issue happen, we could identify which thread is impacted.
This could help stability issue debugging.
Tracked-On: #2037
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This workaround will delay the UOS resuming for 5 seconds, this
behavior is not right and should be replaced by dynamic style.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Use '--ovmf <OVMF image location>' when launching acrn-dm.
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Generic infrastructure for loading BIOS/ROM and providing EPT pages at
High BIOS region.
The size of High BIOS is rounded up to a multiple of 2MB.
v2 -> v3:
- refine mmap_hugetlbfs* to reduce code replication
v1 -> v2:
- make this code generic instead of OVMF-specific
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This is preparation for the upcoming High BIOS work.
Tracked-On: #1832
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Physical NIC mac address is used for generate UOS mac address.
This patch uses a new parameters to pass this information
instead of vm name.
Tracked-On: #1987
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
To fix the issue that watchdog reset hang issue. At previous change,
we assume the reset comes from guest. But watchdog reset or dm killed
by signal is different. It's possible the vm_loop stick on ioreq
attaching.
The new fixing has two parts:
- fixing from kernel side to remove the race issue in ioreq attach,
req_complete_notify and client destory.
- Move the client destroy before waiting of vm_loop exit.
Tracked-On: #1986
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Pass teardown callback when add mevent in mei mediator code.
Which could avoid run_callback calling after the related data
structure is freed.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There is one race issue between mevent callback (which is called
in mevent_dispatch thread) and mevent_delete (which could be called
in dev thread). And the callback is called after mevent_delete.
libevent have the exactly same issue. The issue is decripted here:
https://github.com/libevent/libevent/blob/master/whatsnew-2.1.txt
The fixing is:
We introduce a teardown callback to mevent and make sure there is
no race issue between callback and teardown call.
This patch updates the mevent API and the caller as well.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Peter, Thomas and Shuo raised one race issue in mevent_del. It
happens like following:
Thread mevent_dispatch Thread
mevent_delete_event
epoll_ctl_del
free(evp)
mevent_handle with freed evp
The fixing is adding sync between mevent_delete_event and
mevent_handle in mevent_dispatch.
Thread mevent_dispatch Thread
mevent_delete_event
add evp to del_list
notify mevent_dispatch
return
mevent_handle
Remove evp from del_list
Remove evp from epoll_fd
closefd()
free(evp)
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The tpm patch delete the "break" for CMD_OPT_DEBUGEXIT branch.
Tracked-On: #1978
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
If the USB kernel drives and devices of SOS are not available and
functional ready after UOS is resumed from frozen state, the comming
USB command from UOS will cause a disaster because the DM has no
resourse to to emulation.
This patch add a dynamic time span (could change according to number
of native USB devices attached) to give USB drivers and devices of
SOS an opportunity to be ready.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Device trap has great impact on latency of real time (RT) tasks.
This patch provide a virtio poll mode to avoid trap.
According to the virtio spec, backend devices can declare the
notification is not needed so that frontend will never trap.
This means the backends make commitment to the frontends they have a
poll mechanism which don’t need any frontends notification.
This patch uses a periodic timer to give backends pseudo notifications
so that drive them processing data in their virtqueues. People should
choose a appropriate notification peroid interval to use this poll
mode. Too big interval may cause virtqueue processing latency while
too small interval may cause high SOS CPU usage. The suggested interval
is between 100us to 1ms.
The poll mode is not enabled by default and traditional trap
notification mode will be used. To use poll mode for RT with interval
1ms. You can add following acrn-dm parameter.
--virtio_poll 1000000
Tracked-On: #1956
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When thread_cancel() is called to exit pthread, we can't know
when the thread exit done unless pthread_join() is used to
wait for thread exit.
Tracked-On: #1868
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
vcpu thread need to exit when doing VM full reset and VM shutdown.
Change the code to align the logic. This also can fix race condition
between ioreq client destruction and accessing.
Tracked-On: #1857
Signed-off-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
this patch fixes such an information leaking issue:
in case that after a UOS is destroyed, its memroy
will be reclaimed and maybe re-allocated for a new UOS,
then the previous UOS sensitive data in memory may
be leaked to the new UOS.
Tracked-On: #1825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
modify and add interface to set interrupt monitor params;
it can be set by acrn-dm input arguments like following:
--intr_monitor 10000,10,1,100
the 4 params order is:
interrupt storm theshold per second,
probe period to get interrupt data,
pass-through devices' interrupt injection delay time,
delay duration, after it, stop injection & restore to normal
Tracked-On: #1724
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
paddr_guest2host has same function with dm_gpa2hva. And There is no
usage of dm_gpa2hva. Remove it.
Tracked-On: #1595
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Fengwei Yin <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For CS of UOS, we would like to pass all related info (cs attribute,
limit, base) from DM.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
The virtual rpmb key transfer path is ready now, so replace
previous temporary fixed key solution with random key
solution.
Tracked-On: #1636
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
- remove ASSERT & DEASSET IRQ line IOCTLs
- remove PULSE IRQ line IOCTLs, use set/clear
IRQ line instead.
- Use IC_SET_IRQLINE to set or clear IRQ line
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Will attempt to access element 2048..2049 of
array "ptr32" if below conditions are both true:
1) ptr32[i] == MULTIBOOT_HEAD_MAGIC
2) (i == (ELF_BUF_LEN/4) - 1)
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Fengwei Yin <fengwei.yin@intel.com>
The () was missed during the patch refine. This patch add it.
Tracked-On: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
That string was changed by accident and introduced the removed
items.
Tracked-On: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
compare the two unsigned numbers to avoid delta calculation overflow.
It could happen during UOS warm root, which can trigger a "fake"
interrupt storm.
Tracked-On: #1476
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
run 'acrn-dm --dump <index>' to show build-in parameters
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Enable --vmcfg options for acrn-dm, if --vmcfg <index> is specified,
build-in VM configuration will be used, and override any other
optional parameters.
run 'acrn-dm --vmcfg list' to show all build-in VM configurations.
run 'acrnpdm --vmcfg <index>' to launch UOS with selected config.
Tracked-On: #1528
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
This patch addes the debugexit function to DM. If it's enabled
by DM cmdline (by add --debugexit), the guest could write a
32bit value to port 0xF4 to trigger guest shutdown.
Tracked-on: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds a simple 32bit static elf binary loader to acrn DM.
And if the elf binary follow multiboot protocol, only memory info
will be included in multiboot info.
Tracked-On: #1465
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
We will use timerfd and epoll mechanism to emulate kinds of timers like
PIT/RTC/WDT/PMTIMER/... in device model under Linux. The api is unified
in this patch.
Compare with sigevent mechanism, timerfd has a advantage that it could
avoid race condition on resource accessing in the async sigev thread.
change log:
v1 -> v2: add NULL pointer check for function parameter;
v2 -> v3: rename file name of vtimer.* to timer.*;
rename structure name of vtimer to acrn_timer;
add read() in timer handler to consume I/O event;
v3 -> v4: replace bool clock_realtime with int clockid;
close acrn_timer->fd properly;
Tracked-On: #1489
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
For acrn-dm cmd options, there are some mismatch usage from acrn-dm help
message.
This patch will cleanup them.
Tracked-On: #1469
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For UOS, we need to call hypercall to set BSP init state now.
So we can't combint the vm start and vm reset (vm reset will
reset the vcpu context). Remove vm start from reset_vm. DM
needs to start vm after every vm reset.
Update DM to set UOS BSP init state after vm reset and before
vm start.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to use new interface to set the state of guest BSP (entries, general
registers etc) when DM load bzimage.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to use new interface to set the state of guest BSP (entries, general
registers etc) when DM load vsbl.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add ioctl parameter and API to set vcpu regs. The guest software
loader will call this API to set guest vcpu registers.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Added edge triggered read and write events.
For mei mediator we need to detect changes in
sysfs files, it's not possible to do it via
level based triggers as the files are always
readable.
Tracked-On: #1417
Change-Id: Ib360ad31f30afa576b2b7b833f9bb139c269a030
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current mevent mevent_del/add() implementations are incomplete and buggy.
It's easier to implement mevent_enable/disable() required for mei
virtualization. Other user of these functions, which were previously
empty stubs is the uart mediator, so far it looks working well.
Add few style issues fix on the way.
Tracked-On: #1416
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
@set_wakeup_timer(), "ack" is not initialized before
passing it to "mngr_send_msg() as input.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
atkbdc_init will call pci_irq_reserve to reserve irq 1 & 12, which need
pci_irq_init be called first.
Tracked-On: #1402
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
vPIT is used as a source of system timer by UEFI (e.g. OVMF).
This is ported from Bhyve, with a few changes:
- move to user space, using POSIX timer
- support timer mode 3
- improve the emulation of OUT and STATUS byte
- improve the emulation of counter behavior
- improve the emulation of CE update in periodic mode
- treat CR == 0 as 0x10000
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 283291
Purpose: Adding vPIT support.
Maintained-by: External
Tracked-On: #1392
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
According to PCI spec 3.0 section 6.2.2 "Device Control", guest
could write the command register to control device response to
io/mem access.
The origial code register/unregister the memory range which is
not suitable because it can't handle the sequence:
1. disble the device response to specific memory range
2. reboot guest (DM will try to free the memory range which
was freed in step 1 already)
Tracked-On: #1277
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch depends on a vhm patch merged, "vhm: setup ioreq shared buf
in IC_CREATE_VM ioctl". We intend to combine VM creating and ioreq
shared page setup into one step. For compatibility issue, we need follow
the patch dependency to merge accordingly.
This patch also drops vm_open/vm_close which will be intergrated into
vm_create/vm_destroy.
Tracked-On: #1330
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ioeventfd and irqfd support for vhm was introduced in kernel vhm module.
We provide the interfaces of them for DM users.
Tracked-On: #1329
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is for "interrupt storm mitigation", used to reduce
the effect on SOS if an "interrupt storm" happens in UOS.
Add a monitor thread to get UOS pass-through devices interrupt
freqency data; currently, if "interrupt storm" happens, it'll
send a command to delay interrupt injection to UOS for some time.
The parameters: interrupt storm threshold and delay time can be
adjusted according differt HW configure and use case.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Unmap ptdev BAR when deinit to comply with native system, who zap out
all pre-allocated BARs.
Tracked-On: #1146
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
CMOS offset from 0x20 to 0x9F is used to store rpmb key information.
vsbl loader will init vrpmb key in CMOS when boot/reboot.
vsbl loader will not init vrpmb key during S3 resume.
vsbl will read vrpmb key via CMOS interface.
After reading, the key value is cleared in CMOS. So the key can only be
read once until next boot.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
In handle_resume(), wakeup_reason is updated before call
ops->ops->resume(). Because ops->ops->resume() needs to know the
latest wakeup reason.
Acked-by: Yan Like <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
It is necessary to notify the VHM and hypervisor on the completion of a VHM
request even when the UOS is in suspend or system reset mode because the VHM and
hypervisor rely on the notification to reset their own states on the
request.
Currently the VHM request state is checked against REQ_STATE_PROCESSING instead
of REQ_STATE_COMPLETE when handling system reset or suspend/resume, leading to a
completed request unnotified, and causing the HV to complain on an occupied VHM
request when it raises a new one.
This patch fixes this issue by properly notifying completed requests to the VHM
& hypervisor. Some concerns are raised during a discussion on the potential
races which does not hurt for now but may in the future. These considerations
and potential solutions are documented as comments for future reference.
Tracked-On: #895
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This is the counterpart in DM to the VHM request state update in the
hypervisor. Major changes include:
* Remove accesses to the obsolete 'valid' member.
* Access the 'processed' member using atomic operations.
* Sync the documentation on vhm_request.
In addition, the new state transition also requires a VHM request to be always
handled properly, as there is no 'FAILED' state any more. Instead of crashing
the device model (and thus the UOS as well), the device model should return all
1s or ignore the request when it is to load from or store to an invalid address,
respectively.
Note: there is an issue in vm_system_reset() and vm_suspend_resume() where
completed VHM requests are not properly notified, causing the hypervisor to
complain as it sees uncompleted requests while trying to create a new one. This
issue will be resolved in a separate patch.
v1 -> v2:
* Use macro-defined constants for the default values for invalid PIO/MMIO
reads.
* Change the return type of vmexit_handler_t in DM to void as the return
values are no longer necessary.
* Remove VM_EXITCODE that are no longer used.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
According to ACPI spec, when system back to working mode from
S3, WAK_STS bit (15) should be set.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We do:
- pause target vm
- suspend all virtual devices
- wait for resume notification
- resume all virtual devices
- reset target vm
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Then, acrnctl could send command to monitor module of DM and call
functions defined in pm ops. One example is: acrnctl resume UOS
after UOS enter S3.
Also add general pm.c and move pm related function to this file.
Signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
this patch fixes such an information leaking issue:
in case that after a UOS is destroyed, its memroy
will be reclaimed and maybe re-allocated for a new UOS,
then the previous UOS sensitive data in memory may
be leaked to the new UOS.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrn-manager message structure has a flexible member
payload[0], that risks to out-of-boundary memory access,
and usage of uninitialized variable.
And the req/ack message pairs has various types, which
extend mngr_msg. mngr_send_msg() requires programmer cast
the type of input messages to struct mngr_msg, that is
inconvenient.
We replace payload[0] with an union, which contains all
payload data. So that type cast for mngr_send_msg() is no
longer needed. And we can avoid potential out-of-boundary
memory accessing and using of uninitialized variable
Acked-by: Yan Like <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
This function add high level reset_vdev function. Which is
implemented to call deinit/init pairing to emulate the virtual
device reset operation.
This patch also add the system reset which keep the UOS RAM
content functionality to DM.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Guest has erquirement to support system/full reboot and S3. Which could
trigger different reset path in guest
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
GUEST_CFG_OFFSET is used to pass the memory top info from DM
to HV. The address should be in E820 reserved range to prevent
guest use it for other purpose.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
6300esb has bit in its register to show whether the watchdog
timeout is hit.
This patch adds this bit support. So the guest could query
whether last reset is triggered by watchdog reset.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Cao Minggui <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Tested-by: Binbin Wu <binbin.wu@intel.com>
* introduce EXTRA_VERSION to replace RC_VERSION
* add daily tag into the version information
* unify the hypervisor and device model version
Signed-off-by: Jack Ren <jack.ren@intel.com>
- UOS will boot fail if 'strictio' is enabled ('-e' option), in this
case (with '-e'), device model will block all PIO accesses whose
handlers were not registered, after that, device model program will
exit, hence UOS boot fail.
actually, such kind of accesses exist, e.g. UOS would program
PIT registers (port address: 0x43) if hpet is disabled.
- For debug, we can trap unexpected PIO access in 'default_inout()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Current option of removing vGSI capability is global, which exposes
vIOAPIC link for all ptdev even only one need this. This patch makes
it as ptdev local option to lower the system level impact. To keep
vGSI for MSI capable ptdev, just explicitly append ",keep_gsi" in
option list, like "-s 14,passthru,0/e/0,keep_gsi"
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Update the vcpu id type as uint16_t for vm_create_vcpu, this
keeps alignment with the updates for the structure acrn_create_vcpu
used by hcall_create_vcpu in the hypervisor.
In the device model, the caller is responsible for vcpu id type
conversion; vcpu id type is uint16_t for external interface in the
current implement.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
check if there are enough free huge pages(1GB & 2MB now) for UOS,
if no, it will try to reserve more pages for UOS.
here are two examples
1. if system has free huge pages: 1 page of 1GB size, 0 page of 2MB.
one UOS need 2GB + 500MB memory, it will try to reserve one more 1GB
page and 250 2MB pages from system. If enough free system memory, it
can succeed.
2. if system has free huge pages: 4 pages of 1GB size, 0 page of 2MB.
one UOS need 2GB + 500MB, 1GB huge pages 4 > 2, it's enough, and 2 pages
left. It will try to reserve 250 2MB pages from system free memory,
if failed, it will try to release 1 of the 2 left 1GB pages. And then
try to reserve 250 2MB pages.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
when add/create vcpu failed, before it just exits,
and the resource will not released; now if failed,
let DM release the resource.
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pincpu and vmexit_pause both aligned to lower p, it is a bug, vmexit_pause should align with P(upper).
Missing enable_bvmcons usage so add -b in help prints.
remove redundant tab blank to keep same indentation.
Signed-off-by: Chris Ye <chris.ye@intel.com>
vsbl layout has been changed.
Previously, vsbl start from 64bit mode.
This patch changes the vsbl load code according to the
layout change of vSBL.
The new vsbl binary added reset vector support.
It will start from reset vector in real mode.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
For the platform without virtual bootloader, dm will load uos kernel
directly, and hv will set rip according to uos kernel entry.
In current code, uos bsp starts from 64bit mode, so 64bit kernel entry
is used.
This patch series sets uos bsp to protected mode on such platform, so
32bit kernel entry is choosed.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
monitor_vm_ops and its helpers is added to allow DM to register operations
, so thant vm manager could trigger the power state changes of VM.
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Wang, Yu <yu1.wang@intel.com>
signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Adapt dm-monitor and acrnctl to use the helper functions and new message
definitions in acrn_mngr.h.
These jobs must be done in one commit to avoid build problems:
1. message transmission and callback registration code are moved
to libacrn-mngr.a, so old functions in dm-monitor could be removed to
make code clean;
2. remove unnecessary monior_msg.h;
3. minor changes to acrnctl accordingly.
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Wang, Yu <yu1.wang@intel.com>
signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
With '--ptdev_no_reset', DM doen not abort but warn when assign PCIe
dev without reset capability.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
-memory was dereferenced after being freed:
MACRO 'LIST_FOREACH()' dereference
'client' for next list node after 'client'
was freed.
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Current only 8 vioapic pins for pci irq (total 24 with 16 reserved),
which easily leads virtual GSI sharing with more and more passthrough
devices. This patch doulbes vioapic pin count and adds reboot hooks to
allocate from same pin after each reboot.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
With curren code, DM will ignore the SIGHUP signal generated from
SOS reboot that causes DM will not release resource when SOS reboot
occurs.
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Move all virtual devices init/deinit to function to simplify the
failure path of main loop. In the future, new virtual device will
not touch main loop.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- make ioc_init/ioc_deinit take struct vmctx as argument
- ioc_init return int instead of pointer to struct ioc_dev
- add ioc_dev in vmctx to track ioc_dev
- remove the atkbdc.h included in vmmapi.h
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Liu, Yuan1 <yuan1.liu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- Move the variable local_time from main.c to rtc.c
- Change vrtc_init to return int instead of pointer to vrtc. We do
track vrtc in struct vmctx.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Print an error message and exit rather than using assert, so it is
more obvious what the problem is and no core files are produced.
Fixes#61
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Following functions have never been used anywhere.
Let's remove them.
fbsdrun_muxed()
fbsdrun_vmexit_on_hlt()
fbsdrun_vmexit_on_pause()
fbsdrun_disable_x2apic()
Remove weird prefix "fbsdrun" from following functions' name.
fbsdrun_virtio_msix() --> virtio_uses_msix()
fbsdrun_start_thread() --> start_thread()
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Hao Li <hao.l.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove weird prefix "fbsdrun" from the function name.
Since "fbsdrun_addcpu" has never been called by external
functions, Let's remove its declaration from "dm.h" and
make it as a static function to keep consistency with
"fbsdrun_deletecpu".
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
adding API vm_map_memseg_vma() which using ioctl IC_SET_MEMSEG call
into VHM for futher mem(ept) mapping, based on user vma information.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Type '-T' in DM cmdline to enable hugetlb memory allocation.
It enabled 2 level of huge page:
Level 1: size 2M, path: /run/hugepage/acrn/huge_lv1/guid
Level 2: size 1G, path: /run/hugepage/acrn/huge_lv2/guid
NOTE:
before running, please make sure system already have enough hugepages
reserved under:
/sys/kernel/mm/hugepages/hugepages-xxxxkB/nr_hugepages
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
Two memory ranges are allocated:
- PCI ECFG
- PCI hole
They should be released when deinit_pci. Old code mark
this two ranges not unregistered. Which is wrong for
warm reboot case. Make them could be unregistered.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Move the bvmcons enable flag from main.c to consport.c.
So we don't need the flag in main.c for bvmcons.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add "-i" in the DM boot command line for booting IOC mediator.
NOTE: currently only ioc_init will be called in the main entry, ioc_deinit
hasn't be called so far. The DM plans to add one virtual devices list inside
of struct vmctx in the near furture, and virtual devices data structure will
add one common deinit callbacks which will be called during VM exits.
Will support ioc_deinit once that patch merged.
Signed-off-by: Liu Yuan <yuan1.liu@intel.com>
Reviewed-by: Wang Yu <yu1.wang@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Unlike kqueue/kevent of BSD, the epoll of Linux could be
add/del by using different API on the fly.
This patch drops the notify used by mevent_add/del and
call epoll_ctl to add/delete target fd. Only keeps
global_head to track mevent added and makes the code
logic in mevent_dispatch() a littel bit simpler.
Another thing is related with epoll_ctl. If the target
fd is regular fd which doesn't support epoll, epoll_ctl
will return -1. When DM is start by systemd, the STDIO
is not mapped to terminal, epoll_ctl on STDIO could
return -1. Which block UOS boot. We only call mevent_add
after confirm STDIO is mapped to terminal.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current, mevent cleanup path has issue. There are possible
following calling sequence happen when reboot/poweroff UOS:
1. mevent_dispatch() calls mevent_destroy
2. do_close_post calls some virtual device deinit to delete
mevent.
This patch introduce mevent init/deinit to make sure:
1. mevent init
2. mevent_add is called when init virtual device
3. mevent_del is called when deinit virtual device
4. mevent deinit
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For vSBL boot path, we need to mark the memory vSBL is using
as reserved in e820 table. The add_e820_entry is added to
update the e820 table dynamically.
To simplify the code logic, we assume:
- vSBL is put the middle of one entry of default e820 table
- That entry has orignal RAM type in e820 table
- The e820 table has enough space to hold two more new entries.
If there is more complicated case in the future, we could extend
add_e820_entry to handle it.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The region of MPtable/ACPI table/SMBios resides in
0xF0000 ~ 0x100000. They should be marked as RESERVED instead of
RAM type in e820 table.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Devices' de-init process might access some mapped memory space, such as
virtio virtqueues. Access after unmap will cause a fault.
Release the memory map after de-init processes can avoid it. Reading
more code, there are many error handling lost to unmap the memory.
Refined the code to do it.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
sync acrn_common.h to device model
set secure world enabled flag
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
malloc: allocate a block of memory, the contents of the block are undefined.
calloc: allocate a block of memory for an array of num elements and initializes all its bits to zero.
Signed-off-by: yechunliang <yechunliangcn@163.com>
The interface will be used to interact with VHM service via IOCTL.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
A monitor component will be added to acrn-dm, which crteats socket,
bind and listening at /run/acrn/vmname. Acrnctl & acrnd could conn
-ect to the socket for communication, using defined message, in
include/monitor_msg.h
For each defined message, a message handler callback could be
registered via monitor_add_msg_handler(). On received of a defined
message, a certain call back will be called. Each callback can only
see the message sender's socket-fd.
When acrn-dm want report something, not triggered by incoming message
it can send broadcast message, use monitor_broadcast().
Acked-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin, Fengwei <fengwei.yin@intel.com>
Signed-off-by: Tao, Yuhong <yuhong.tao@intel.com>
The patch includes:
1. vrtc_cleanup -> vrtc_deinit to align with other devices
2. delete timer created in vrtc_init
3. make call to vrtc_deinit in cleanup path
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
old code has no deinit functionality for virtual keyboard device.
Which will trigger resource leak when system is reboot.
deinit function is added to:
1. deinit low ps2 based keyboard and mouse
2. release memory/io resource of virtual keyboard device
NOTE: IRQ resource will be handed in pci irq module
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Add deinit function for ps2kbd and ps2mouse.
To support deinit function for ps2kbd and ps2mouse which
has struct atkbdc_base as parameter, we make struct
atkbdc_base exported as public.
We also add console unregister function for keyboard
and mouse. Which are called in ps2mouse/ps2kbd deinit
function.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
The trusty enabled or not will be passed to HV
with create vm hypercall. It's passed to vSBL within
config page also.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Some guests needs guest partition info passed to support
A/B boot. DM needs to load guest partition info from file
and pass to vsbl.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There are two things here:
1. Enable basic vsbl boot functionality.
2. add long option to DM to specific vsbl file. So DM could
choice to boot guest with vsbl.
It's hard to find a suitable short option. So only long option
is supported for vsbl file name option.
If long option "--vsbl='vsbl_file_name'" is given in DM
commandline, the "vsbl_file_name" will be loaded by DM
first and running. vsbl will be response to lead guest to
next boot stage.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
To align with file name, acrn_sw_load_direct() is changed
to acrn_sw_load_bzimage().
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The common loader code is put to sw_load_common.c
The loader code for directly kernel loading is put to sw_load_bzimage.c
The further change for SBL will be put to sw_load_sbl.c
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
