Return the parsed scanout_num to guest_vm so that the guest_vm can configure multi-display.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
Sometimes the virtio_gpu in guest_vm doesn't pass the zero coord_x/y for the
displayed framebuffer. In such case the offset should be calibrated for pixman_image/dmabuf
so that it can display the image from the correct image.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
The virtio-gpu display will be handled by the below cmd sequence:
1. Virtio_GPU_CMD_CREATE_RESOURCE
2. VIRTIO_GPU_CMD_SET_SCANOUT/SET_SCANOUT_BLOB
3. VIRTIO_GPU_CMD_FLUSH
And the VIRTIO_GPU_CMD_FLUSH will notify the vdisplay module to display the
framebuffer related with the scanout_id. But the virtio_gpu_cmd_flush doesn't
pass the scanout info.Instead it only passes the flushed_region and the
resource_id. So it needs to check whether the scanout_region is covered by the
flushed_region and then decide whether the scanout_win needs to be displayed.
v1->v2: Use the bpp instead of hardcode 4 for offset_calculation
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
The virtio-gpu in guest_vm also passes the scanout_id for cursor operation.
So this scanout_id should be used in course of handling cursor operation.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
The scanout_id is included in the below virtio-gpu cmd request.
VIRTIO_GPU_GET_EDID
VIRTIO_GPU_SET_SCANOUT
VIRTIO_GPU_SET_SCANOUT_BLOB
VIRTIO_GPU_GET_DISPLAY_INFO
So the scanout_id and scanout_rect should be handled correctly. And it will
use the scanout_rect instead of resource width/height in course of handling
VIRTIO_GPU_SET_SCANOUT/SCANOUT_BLOB cmd.
v1->v2: change the position to zero when returning response for GET_DISPLAY_INFO
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
Now it only supports one scanout for virtio-gpu. So the scanout_id is ignored in
course of handling virtio-gpu cmd. In order to handle the virtio-gpu cmd correctly,
it adds the virtio_gpu_scanout structure so that it can record the scanout info.
v1->v2: Refine the field in virtio_gpu_scanout and error message for scanout_id
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
Vdisplay module will create the gui_window (vScreen) based on the virtio-gpu
parameter. When virtio-gpu device tries to establish the connection with
vdisplay module, it will return the supported number of vScreen.
Then the virtio-gpu device can initialize the correct info for the guest_vm.
BTW: The number is fixed to 1.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
Currenly it can support only one display_win. When virtio-gpu wants to display
the framebuffer from Guest_vm, it will render it into the default win. In order
to support multi-window, the scanout_id is added for display API.
After display API is refined, the vdisplay and virtio-gpu can support the multi-win
independently.
BTW: Now the scanout_id is not implemented in vdisplay module and the virtio-gpu always
passes the zero. It will be implemeneted in the later patches.
Tracked-On: #7988
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Peng Sun <peng.p.sun@linux.intel.com>
There was some secure coding style violations of virtio net and tmp,
this patch add some NULL check to fix these violations.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
disable NOTIFY during getting requests from virtqueue. This will improve
the IO performance.
Tracked-On: #7940
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add ioeventfd and iothread to virtio framework. When a virtio device
claim to support iothread, virtio framework will register a ioeventfd
and add it to iothread's epoll. After that, the new notify will come
through the iothread instead of the vcpu thread. The notify handler will
be called to process the request.
Tracked-On: #7940
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use the VHOST_NET_F_VIRTIO_NET_HDR in linux system header file,
and set the correct feature bit for Virtio net header.
Tracked-On: #7790
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Free the virtio_vsock struct resource in virtio vsock deinit function
in case memory leak.
Tracked-On: #7759
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Replace the exclamation mark with period mark in debug info and fix
the Guest CID max value macro.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
Fix the log format problem in devicemodel when using virtio-console with
'stdio' configuration.
In virtio-console, it will change the STDIO's attributes, and will case
the log message after that not align.
e.g:
for (i=0; i<3; i++)
printf('test\n');
The original output would be like this:
test
test
test
After add 'OPOST' to oflag of STDIO, the output would be like this:
test
test
test
(OPOST - Enable implementation-defined output processing)
Tracked-On: #7860
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Fix the memory leakage issue caused by incomplete deinit flow.
Tracked-On: #7759
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The vsock cid type is u64, redefine the cid type to u64, and use
dm_strtoul API replace dm_strtoi.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
The virtio feature bits is 64bits but the access will be split
as two times 32bits access. This patch fixes the bug which overwrites
another side 32bits, and causes feature bits are lost.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch supports the user space logic of vhost vsock which
is majorly for its initialization phase.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The patch expose the vhost kernel ioctrl API and remove the virtio_net
operation functions to the virtio_net code module.
Tracked-On: #7456
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Conghui <conghui.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use needed constants from libderm instead of directly using
kernel UAPI.
Tracked-On: #6688
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
Now vdpy_get_display_info/get_edid is called before vdpy_init.
This is incorrect. They should be called after setting up the
connection with vdisplay.
Tracked-On: #7376
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
The virtio_gpu in guest_vm will try to fetch the EDID to query
the supported resolution. Guest vm will send the cmd of
VIRTIO_GPU_CMD_GET_EDID and receive the response of VIRTIO_GPU_RESP_OK_EDID.
Now acrn-dm has some issues in course of handlding EDID request: Incorrect
resp type, the incorrect response. This will cause that the guest_vm fails
to fetch the EDID.
Tracked-On: #7376
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
In course of creating the udmabuf, udmabuf_create_list is allocated and
passed to kernel. After the dmabuf is returned, it is not used
any more. Need to free it otherwises it will cause the memory leak.
Tracked-On: #7337
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
It still tries to access the gpu->vdpy_handel after the gpu
is free. This is incorrect.
Tracked-On: #7337
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Otherwise the memory related with vga_context is leaked.
v1->v2: Use the pthread_join instead of usleep to wait for
the termination of vga_thread.
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
This is not needed as it is reconfigured in course of vga_thread_loop.
At the same time it is not thread-safe as the 3D api is involved
in vdpy_surface_set.
v2->v3: move the initialization of vga_surface width/height into
vga_thread.
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
In order to support the VGA op, one vga_thread is created. But
in course of virtio_gpu_reset, it will also create one vga_thread.
This is incorrect.
v1->v2: the thread_id of vga_thread is treated as read-only after
the thread is created.
One thread_status based on atomic type indicates the life_cycle
of vga_thread.
v2->v3: Add the vga_thread_mtx in course of changing life_cycle of vga_thread
Tracked-On: #7296
Acked-by: Wang Yu1 <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Add license information to virtio_gpu.c
Fix some grammar issues.
Tracked-On: #7241
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The DMABuf sharing is based on the BLOB feature. This will
check the attribute of system memory for guest_vm and udmabuf.list_limit
parameter. If it meets with the requirement, export the BLOB feature
so that the FE driver in guest_vm can send the blob cmd.
VIRTIO_GPU_CMD_CREATE_BLOB:
VIRTIO_GPU_CMD_SET_SCANOUT_BLOB:
VIRTIO_GPU_CMD_SET_FLUSH(BLOB)
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Now Virtio-gpu FE is using the below cmds to submit the framebuffer that
needs to be displayed.
VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D
VIRTIO_GPU_CMD_SET_SCANOUT
VIRTIO_GPU_CMD_FLUSH
This will introduce twice copy. In order to optimize the twice copy, the below
cmds are added and the virtio-gpu BE can use the dma-buf sharing.
VIRTIO_GPU_CMD_CREATE_BLOB
VIRTIO_GPU_CMD_SET_SCANOUT_BLOB
VIRTIO_GPU_CMD_FLUSH
V2->V3: Remove the inlined header file of devicemodel/include/public/udmabuf.h
to avoid the license issue
Tracked-On: #7210
Acked-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Legacy VGA & VBE interface as a common interface is supported by
many legacy and modern OS. Many installer of OS distribution use
this interface to display the GUI of installer when setup a refresh
new installation on bare-metal. Besides, Windows OS always use this
interface to display it's BSOD, recovery mode & safe mode GUI. It
is need because Windows don't include virtio-gpu driver as their
in-box driver, VGA interface will be used before the virtio-gpu
driver been installed.
To be compatiable with the PCI bar layout of legacy VGA, the layout
is refined to meet with the requirement of legacy VGA and modern
virtio-gpu.
BAR0: VGA Framebuffer memory, 16 MB in size.
BAR2: MMIO Space
[0x0000~0x03ff] EDID data blob
[0x0400~0x041f] VGA ioports registers
[0x0500~0x0516] bochs display interface registers
[0x1000~0x17ff] Virtio common configuration registers
[0x1800~0x1fff] Virtio ISR state registers
[0x2000~0x2fff] Virtio device configuration registers
[0x3000~0x3fff] Virtio notification registers
BAR4: MSI/MSI-X
BAR5: Virtio port io
Tracked-On: #7210
Signed-off-by: Sun Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Hardware cursor emulation of virtio-gpu video adapter. Guest vm can
show its own cursor in virtual display, not share the cursor with
service vm. It also accelerated by SDL(OpenGL ES 2.0 backend) API
with hardware acceleration based on the GPU hardware own by service
vm.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Implement 2D mode of virtio-gpu adapter which can transfer outputs
from guest vm framebuffer and store them to host 2D scanout buffers.
These 2D scanout buffer can be shown by calling vdpy_surface_set/update
API provided device/include/vdisplay.h.
Virtio-gpu 2D commands calling sequence:
1) VIRTIO_GPU_CMD_GET_EDID
2) VIRTIO_GPU_CMD_GET_DISPLAY_INFO
3) VIRTIO_GPU_CMD_RESOURCE_CREATE_2D
4) VIRTIO_GPU_CMD_RESOURCE_ATTACH_BACKING
5) VIRTIO_GPU_CMD_SET_SCANOUT
6) VIRTIO_GPU_CMD_TRANSFER_TO_HOST_2D
7) VIRTIO_GPU_CMD_RESOURCE_FLUSH
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extended display identification data(EDID) is a data to store
display timings which are supported by ACRN virtual monitor.
Virtio-gpu FE driver will request it to config crtc for display
resolutions.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
ACRN virtual monitor shown as a GUI system window of service vm.
It can display graphic outputs of guest vm which is stored in
service vm's buffers by virtio-gpu. Display operation is accelerated
by Intel GPU PF(SRIOV) device with SDL(OpenGL ES 2.0 backend) API.
This provides one generic display solution. When the virtio-gpu is
added, it will firstly try to setup the connection to graphics system
and then display the framebuffer from the guest vm in the created
window region.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Virtio-gpu is a virtio based graphic adapter. It supports 2D mode
which can transfer the guest vm's framebuffer into service vm's
buffers for displaying. It can co-work with Intel GPU VF(SRIOV)
device and provide thransport for the accelerated contents. With
this, guest vm can benefit Intel GPU hardware to accelerate media
coding, 3D rendering and compute.
Tracked-On: #7210
Signed-off-by: Sun, Peng <peng.p.sun@linux.intel.com>
Reviewed-by: Zhao, yakui <yakui.zhao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
i2c bus counter 'acpi_i2c_adapter_num' shall be updated
when virtio-i2c device is de-initialized, else in user VM
reboot case, this global counter will not be reset and
keep the value last user VM boot, which is not expected
and cause iasl(building ACPI data) program crash finally
because the i2c device name space overflow.
Tracked-On: #7208
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Now, the DM assumes the device name entered by user is dependent on
the type.
For example, the device of tap type is named tap_TAAG, this patch
remove the above assumption.
User could set any name, no matter the code of DM or actually created,
it is represented by user input.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei<chenli.wei@linux.intel.com>
HMAC_*, MD5_* and SHA256_* are deprecated since openssl3.0, replace them with the corresponding equivalents.
Tracked-On: #6743
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The current mac detection logic only check whether there are parameters
after tap opt. Don't care whether the parameter is MAC or not, then
mac_provided will be set to 1, which will disable the mac_seed setting
when using sub parameters
This patch will check opt and fix the above issue.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
As a parameter of acrn-dm,the mac_seed is only used for virtio-net.
So this patch change it to the sub-parameter of virtio-net.
Tracked-On: #6690
Acked-by: Yu1 Wang <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
Remove device name requirement for “tap” and "vmnet", change the
parameter format like:
"-s 4,virtio-net,tap/vmnet=dev_name".
Tracked-On: #6690
Acked-by: Yu1 Wang <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
The current code would cause infinite calls to vq_getchain()
because that:
- error check of vq_getchain() return value is missing.
- virtqueue misunderstand that there are avaliable descripters
even though the idx of avail ring is invalid.
This patch fixes it by checking validity of the return of
vq_getchain() and jump out of the loop for invalid return value.
This patch alse add validity check in judgment of avaliable
descriptor, and check if the diff between idx of avail ring and
the last idx is greater than size of this queue.
Tracked-On: #7038
Signed-off-by: Wen Qian <qian.wen@intel.com>
Signed-off-by: Li Fei <fei1.li@intel.com>
Acked-by: Wang Yu1 <yu1.wang@intel.com>
The following parameters have not used by new design:
1. --vsbl <vsbl_file_path>
2. --part_info <part_info_name>
3. -G, --gvtargs <GVT_args>
4. -s <slot>,pci-gvt
5. -Y, --mptgen
6. -s <slot>,virtio-hdcp
7. -s <slot>,npk
8. -s <slot>,virtio-coreu
9. -i, --ioc_node <ioc_mediator_parameters>
10. --pm_by_vuart [pty|tty],<node_path>
11. --pm_notify_channel <channel>
This patch remove these parameters from usage and comment in code to
explain they are all obsoleted now.
Tracked-On: #6690
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Chenli Wei <chenli.wei@linux.intel.com>
this patch validates input of virtio_console_control_tx()
function to avoid potential progream crash with malicious
input from guest.
Tracked-On: #6851
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
