This patch is to support direct assignment of P2SB bridge to one pre-launched
VM for EHL. User can configure this per-VM attribute in scenario xml:
<mmio_resources desc="MMIO resources.">
<p2sb>y</p2sb>
</mmio_resources>
Set p2sb to y to passthru P2SB bridge to VM, and n otherwise.
Tracked-On: #5221
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
This patch is to support the Inter-VM communication by IVSHMEM
in config tool.
Users can configure IVSHMEM_ENABLE to enable or disable Inter-VM
communication by IVSHMEM; users can configure the name, size,
communication VM IDs of the IVSHMEM devices in the VM settings of
scenario xmls, then config tool will generate the related IVSHMEM
configurations for Inter-VM communication.
The config tool will do sanity check including when saving the xmls:
the format of shared memory region configuration is
[name],[size],[VM ID]:[VM ID](:[VM ID]...);
the max size of the name is 32 bytes;
the names should not be duplicated;
the mininum value of shared memory region size is 2M;
the value of shared memory region is a power of 2;
the size of share memory region should not extended the size of
available ram.
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Refine cpu affinity in hybrid rt xmls for whl-ipc-i5/7
2.Refine guest flag for hybrid rt xmls for whl-ipc-i5/7
Tracked-On: #5081
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch adds support to configure MBA delay values from
scenario xml files just as it is done for CAT mask. This will
improve user experience when configuring RDT resource mask
values.
Tracked-On: #4943
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1.Add parser and sanity check for RDT_ENABLED/CDP_ENABLED/CLOS_MASK.
2.Skip to generate RDT inforamtion when HW not support RDT or usr
select 'n' to disable RDT feature.
3.Add contiguous bit 1 check for CLOS_MASK.
Tracked-On: #4860
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As VUART is not supported PCI VUART, use native PCI ttySn's IRQ for
VUART1 would cause communication failed, allocate a free IRQ for it.
Tracked-On: #4798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add max VM count check when generating scenario XML file.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
To keep align hv source code changes, config tool doese below changes:
1. Remove UUID from scenario config files.
2. Remove severity from scenario config files.
3. Use vm type to instead load order type.
4. Use the mapped UUID data base for launch vm script configurations.
5. Unify the ui_entry_api for '--out'
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
As it doesn't depends on the scenario, there are sos/pre launched VMS
in config xmls, emulate vhostbridge for sos vm, specify the pass-thru
PCI device for pre launched vm.
Add support to parse pci_devs for pre launched vm.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
For purpose weaken 'scenario' from config tool, remove 'scenario' dependency
from config tool.
Tracked-On: #4641
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Board defconfig depends on hypervisor configurations and vm configurations,
add this to support to parse board defconfig from vm configuration.
Tracked-On: #4634
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Rounding HI_MMIO_START, HI_MMIO_END to the closest 1G. This avoids
round up logic in the hypervisor.
Tracked-On: #4586
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Scenario config should relay on library/common.py and scenario_cfg_lib,
then remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Board config should relay on library/common.py and board_cfg_lib, then
remove the duplicate parameters and functions.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
For purpose to refine the library/common and xx_cfg_lib, should have
to expands parameters and functions to common.py firstly.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
This patch does the following
1) Removes the limitation on BAR size for 1 GB
2) Align the BAR address to the BAR size
Tracked-On: #4586
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Added "vcpu_clos" to configuration XML, here is an example of VM2 with 2 vCPUs:
<clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">
<vcpu_clos>1</vcpu_clos>
<vcpu_clos>0</vcpu_clos>
</clos>
A macro will be generated in vm_configuration.h:
#define VM2_VCPU_CLOS {1U, 0U}
And the macro will be used in vm_configuration.c:
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
...
{
...
.clos = VM2_VCPU_CLOS,
...
}
}
Tracked-On: #4566
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Currently, config tool generate board files and scenario files in
acrn-hypervisor directory, the origin souce code would be corrupted by
the config tool. Config tool add '--out' option for user to give a path
to store the generated files, without this option, tool will generate
files in origin source code.
Tracked-On: #4517
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove '--enable_commit' argument since acrn-config will not use git tool any
more.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. If the device configure space is not fixed by ACPI and its pbar address
is above 4G or lower than 2G, then remap the vbar address to high memory.
2. Due to GPU might have huge MMIO space which would result in
HV_RAM_SIZE overflow, skip its vBAR remapping for now when the size high
than 1GB.
Tracked-On: #4458
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patches removes the unused CLOS_required flag from the
offline guest configuration tool.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
xml file
This patch adds support for parsing RDT resources and
its max clos, max supported mask values from the target xml file.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Modify the hpa start size value for logical_partition scenario to avoid
build issue, and make the memory size of pre-launched VM configurable.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to parse 'severity' item tag from webUI and set them into
scenario configurations.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. unify get_vuart_info_id/get_vuart_id api in board/scenario/launch
config tool.
2. if vm use 'vuart1(tty)' method to power off, make sure this vm have
select the vuart1 'SOS_COM2_BASE'.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-net mediator support to parse and get 'virtio-network' item value
from launch config files, these values are editable by user.
Tracked-On: #4185
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add virtio-block support to parse and get 'block' item value
from launch config files, these values are editable by user.
Tracked-On: #4172
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
config
Add support to parse and get 'virtio-input' item value from launch config
files, these values are editable by user.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some API calls have the same function in library config,
the patch refines the API calls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Minor changes on git commit message of config patch:
For board config patch, specify with "config patch for board xxx";
For scenario config patch, specify with "config patch for scenario yyy".
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Check git environment only when '--enable_commit' option was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Sometimes character '-' or space need to be converted to '_' to make string format uniformed.
Add this common api to satisfy such requirment and refine the code for board name generating.
Tracked-On: #3852
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Config tool will generate files for board/scenaro/launch, some files are
part of souce code for specify board. Git add/commit these files should
be one optional of user experience. Add "--enable_commit" parameter to
enable git add/commit.
usage:
--enable_commit: flag of whether to do git commit the config file changes
to current git branch. Do commit with this flag and not do without the flag.
Tracked-On: #3834
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. generate launch script file and apply to the source file
usage: launch_cfg_gen.py [h]--board <board_info_file> --scenario <scenario_info_file>
--launch <launch_info_file> --uosid <uosid id>
board_info_file : file name of the board info
scenario_info_file : file name of the scenario info
launch_info_file : file name of the launch info
uosid : the uos id which to launch:[0..max uos id]
sample:
$ python3 launch_cfg_gen.py --board ../xmls/board-xmls/apl-mrb.xml
--scenario ../xmls/config-xmls/apl-mrb/sdc.xml
--launch ../xmls/launch_config/mrb_launch.xml --uosid 0
v1-v2:
1). usage: '--vm' -> '--uosid'
2). add 'uuid' option for acrn-dm
3). support parse tag from 'rootfs' to 'rootfs_dev'
4). support parse tag from 'hard_rtos' to 'Preempt-Rt Linux'
5). support pasre tag from 'redirect_console' to 'console_type'
6). add 'nvme' passthrough option
7). modify uos_type to upper string in webUI
8). support to generate launch file by uosid, this map to scenario
id
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1. grap 'ext4' rootfs, and store it as "BLOCK_DEVICE_INFO" tag
2. remove 'Tab' from app tools
3. add support to parse ' ' from scenario xml
v1-v2:
1). modify the board info "ROOT_DEVICE_INFO" -> "BLOCK_DEVICE_INFO"
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
1.the script will parse the the board information which already
generated, $(scenario).xml modified by user, generate scenario
vm configuration and apply to the acrn-hypervisor source code base.
2.parse cpu/memory/ttys/rootfs information from native os and store it to
the source code
3.implemnt scenario_config and it's usage
usage: scenario_cfg_gen.py --board <board_info_file> -scenario <scenario_info_file>
board_info_file : file name of the board info
scenario_info_file : file name of the scenario info
sample:
$ python3 scenario_cfg_gen.py --board ../board-xmls/apl-mrb.xml
--scenario ../config-xmls/scenarios/sdc.xml
Also improvement board config generate usage:
sample:
$ python3 board_cfg_gen.py --board ../board-xmls/apl-mrb.xml
--scenario ../config-xmls/scenarios/sdc.xml
V1-V2:
1). parse board_setting.xml was removed as these configuration will be
stitch into scenario configuration
2). parse console for different formats
3). parse epc sections
4). add logical partition rootfs
5). support to parse clos, while webui set to None type
6). support to parse bootargs, while webui set to nul
7). convert '-' to '_' for pci sub class name while generating source file
Tracked-On: #3602
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
