Per debugging requirement, map the watchdog reset to warm reset.
So the ramconsole could be used to capture the kernel log of UOS
before watchdog is hit.
Tracked-On: #2471
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
/sys/class/gpio/gpio460 is a directory,
should use -d instead of -f to check its existence.
Tracked-On: #2328
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Collect the dm log to dmesg for profiing.
These mesage will be easy to profile when dm booting.
Tracked-On: #2336
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
The current xHCI mediator doesn't well support disable endpoint command.
This patch is one workaround for disable endpoint command to avoid
xHCI mediator to continue handle already dropped data.
Tracked-On: #2325
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is one xDCI passthrough workaround. To support DRD in Guest,
the xDCI does VT-d pass through, and DRD be emulated in xHCI mediator.
With Guest S3 stress test, ramdonly the xDCI can't be emuerated by USB
host even the DRD is already switch to device mode. When this issue
reproduce, does DRD switch to host then switch back can resuce this
issue.
Besides, the virtual drd regiters need to be set to reset value during
Guest warm reset flow.
Tracked-On: #2326
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>y
During UOS reboot, sometime the wifi firmware status is wrong and can't
handled by UOS driver, this patch add gpio reset for the wifi chip to avoid
such error.
Tracked-On: #2328
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
GPIO460 is used to reset wifi chip on apl-mab.
Export the GPIO pin to userspace so that it can be used in device model.
Tracked-On: #2328
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
1. reduce the time once offline cpu failed.
2. remove the passthru of sd card for GP2.0.
Tracked-On: #2331
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Adding this parameter so that it could provide more info when
kernel panic happens. And this has almost no overhead as it only
uses several existing kernel APIs.
The 0x1f is a bitmask for type of info to be dumped, and it means
it will print task/memory/timer/lock/ftrace info when panic happens.
Tracked-On: #2309
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
The issue will result in the loss of wakeup reason and signal
data, because the CBC header was not added when generating the
tx package.
Tracked-On: #2282
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The issue leads that the IOC mediator's fd is turned off
incorrectly, causing the IOC mediator to fail.
The root cause is because after closing fd is not set
to an invalid fd.
The issue can be reproduced by the S3 stress test.
Tracked-On: #2300
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently whether audio works in virtio mediator or pass-through mode can be determined
by checking the device file of vbs_k_audio
But before the completion of loading audio virtio-BE module, the device file of /dev/vbs_k_audio
doesn't exist. In such case in course of loading UOS, the incorrect work mode is selected
for audio device (passthru instead of mediator). This is incorrect
Tracked-On: projectacrn/acrn-hypervisor#2247
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
Expose a new ACPI table PSDS to UOS.
This PSDS table show the security capability of the VM.
Only enable this table in UOS when PSDS presented in SOS.
Tracked-On: #2241
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Array index of "vbdp_devs" may be out of bounds if
"i >= XHCI_MAX_VIRT_PORTS", so index checking is necessary.
Tracked-On: #1252
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
As VIRTIO_CONFIG_S_NEEDS_RESET is not defined in standard virtio header
file on ubuntu, there will be compile issue. so add
VIRTIO_CONFIG_S_NEEDS_RESET to fix it.
Tracked-On: #2219
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
We will mark ioreq as COMPLETE in VHM via IC_NOTIFY_REQUEST_FINISH
ioctl. vm_notify_request_done can do it. So remove this one.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
VHM will provide a ioctl to clear all IO requests' status. This is
useful to handle ioreqs in VM normal reboot and emergency reboot.
Tracked-On: #1821
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The possible memory leak was introduced by commit
7fce2462a0
If mevent add fails in virtio mei, the resource allocated doesn't
be released. This patch fix this memory leak issue.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
To avoid the race issue for mevent in uart, we introduce the
teardown callback to handle resource free case.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Make uart_init and uart_deinit internal functions. And make
uart_set_backend/uart_release_backend cover uart_init/uart_deinit
function.
This will make mevent teardown callback adding easier for uart_core.
Tracked-On: #1877
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The patch fix some string operations issues and also improve readability
of several snippet.
Tracked-On: #2133
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Discard the input/output data when open tty file. To avoid the
mevent callback is triggered immediately when the fd is added to
epoll.
Also update the uart_drain only read the data from tty file when
fifo has available space.
Tracked-On: #2159
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Reuse linux common virtio header file and remove the repetitive
definition.
Tracked-On: #2145
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Physical NIC mac address is used for generate UOS mac address.
This patch uses a new parameters to pass this information
instead of vm name.
Tracked-On: #1987
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Now one macro is added to define the alignment requirement.
>#define __aligned(x) __attribute__((aligned(x)))
Some code uses the __aligned(x) to define the alignment while the other
code uses the original alignment definition.
So they are unified.
Tracked-On: projectacrn/acrn-hypervisor#2131
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Release the resource reqeusted during msix table init if error occurs.
Change the type of the second arg of deinit_msix_table from pci_vdev to ptdev,
to align with init_msix_table.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
Currently, the emulation of pci msi/msix can be handled by hypervisor code.
The logic in dm passthru driver can be simplified.
This patch remaps msix table to usersapce in DM passthru driver.
1. The access to the msix table in passthru driver will be trapped, and emulated by hv code.
2. The access to the config space in passthru driver will be trapped, and emulated by hv code.
So dm passthru driver no longer needs to keep the whole logic of handling msi/msix.
No need to do msix table remapping in sos kernel.
After the patch, the msix table ioremap code in vhm_dev.c can be removed.
Tracked-On: #1782
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Shuo A Liu <shuo.a.liu@intel.com>
S3 emulation is complicated and greatly dependent on system timing,
hence this patch changes log level for some important logs to help
online debugging (could output log by modifing launch_uos.sh and
without re-compiling)
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This is an obvious bug, which releases memory but still access the
data on the released memory. It is risky operation, and may result
failing to do normal enumlation process. This patch is used to fix
it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The USB S3 virtualization logic is complicated and heavily affected by system
timing. To make the debugging work easily, change related log level to facilitate
quick bug fixing.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When issue happen, we could identify which thread is impacted.
This could help stability issue debugging.
Tracked-On: #2037
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
irqfd only supports msix devices. In the current code a mevent is
added to poll the callfd from userspace to support intx devices.
This patch removes the support for non-msix devices since they are
not used in the current device model.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-net resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called. A ref_count
is added to virtio_console data structure. Teardown callback needs to
free the resources of the backend and when the ref_count of the
virtio_console is zero the whole virtio-console is freed.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Teardown callback is provided when mevent_add is called and it is
used to free the virtio-input resources.
Tracked-On: #1877
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
On Intel Apllo Lake platform, the VBus will drop after the SOC suspended,
hence during the SOS resuming process, there will be a disconnecting event
and a connecting event sent to each native USB device in order.
This patch will use new strategy for S3 resuming emultion.
1. The DM set PORTSC register to 'no device attached' state when S3
suspending started,
2. SOS resuming starts and do nothing for device disconnecting event,
3. 'Cache' device connecting event and don't report it to UOS,
4. UOS believe no device attached due to PORTSC register state and
begin to clear the resource allocated for the device before S3
suspending,
5. DM receives the Disable Slot command from UOS and report the 'cached'
device connecting event to UOS, hence trigger the emulation behavior
for the device.
The purpose of this strategy is to let UOS resuming proceed as quickly as
possible, which means the UI will be turned on quickly to user.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
According to xHCI spec 5.4.1.1, this command hasn't ask to clear
PORTSC for R/S handling. So the PORTSC should always present the
physical usb bus status.
The old implementation changes the PORTSC according whether the
pci_xhci_dev_emu struct is allocated, it is not consistent with
spec and this patch is used to fix it.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Comparing two USB devices' path is frequently used operation, abstract
it as an seperated function for convenience.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This workaround will delay the UOS resuming for 5 seconds, this
behavior is not right and should be replaced by dynamic style.
Tracked-On: #1893
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
