Improve the logging readibility for the Board Inspector tool by adding
a space after "Error:" and "Warning:" instead of have the text directly
attached to it.
Tracked-On: #6736
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Commit 4a04fcc ("config_tools: skip remapping HW units with no devices under
scope") skips hardware remapping units without any device under its scope in the
config tools, which turns out to only work if the HV is not parsing the DMAR at
runtime.
This patch reverts the previous workaround and fixes the previous issue by
always initializing `dmar_hw_list.hw_ignore` when parsing DMAR. This ensures
that the DRHDx_IGNORE macro will always be emitted while DRHD_COUNT is not
impacted.
Fixes: 4a04fcc ("config_tools: skip remapping HW units with no devices under scope")
Tracked-On: #6709
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Fix a crash in the 'board_inspector.py' tool in case 'cpuid' is not
installed on the system.
The tools crashes because 'cpuid' is used before the check for
dependencies is done in the code. That check for dependencies is
done in the 'legacy/board_parser.py' file. But the native_check()
function that is called before it also expects the cpuid tool to
be installed.
The fix is to move the check for dependencies in the main
'board_inspector.py' file, before any other operation is done.
Tracked-On: #6719
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
We should generate new board xmls for cfl,whl and nuc11 because of the
board inspector changes. For the details refer to these RPs:#6699 #6710
Tracked-On:#6709
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
For vCAT, it may need to store more than MAX_VCPUS_PER_VM of closids,
change clos in vm_config.h to a pointer to accommodate this situation
Rename clos to pclosids
pclosids now is a pointer to an array of physical CLOSIDs that is defined
in vm_configurations.c by vmconfig. The number of elements in the array
must be equal to the value given by num_pclosids
Add max_type_pcbm (type: l2 or l3) to struct acrn_vm_config, which stores a bitmask
that selects/covers all the physical cache ways assigned to the VM
Change vmsr.c to accommodate this amended data structure
Change the config-tools to generate vm_configurations.c, and fill in the num_closids
and clos pointers based on the information from the scenario file.
Now vm_configurations.c.xsl generates all the clos related code so remove the same
code from misc_cfg.h.xsl.
Examples:
Scenario file:
<RDT>
<RDT_ENABLED>y</RDT_ENABLED>
<CDP_ENABLED>n</CDP_ENABLED>
<VCAT_ENABLED>y</VCAT_ENABLED>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
/RDT>
<vm id="0">
<guest_flags>
<guest_flag>GUEST_FLAG_VCAT_ENABLED</guest_flag>
</guest_flags>
<clos>
<vcpu_clos>3</vcpu_clos>
<vcpu_clos>4</vcpu_clos>
<vcpu_clos>5</vcpu_clos>
<vcpu_clos>6</vcpu_clos>
<vcpu_clos>7</vcpu_clos>
</clos>
</vm>
<vm id="1">
<clos>
<vcpu_clos>1</vcpu_clos>
<vcpu_clos>2</vcpu_clos>
</clos>
</vm>
vm_configurations.c (generated by config-tools) with the above vCAT config:
static uint16_t vm0_vcpu_clos[5U] = {3U, 4U, 5U, 6U, 7U};
static uint16_t vm1_vcpu_clos[2U] = {1U, 2U};
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags = (GUEST_FLAG_VCAT_ENABLED),
.pclosids = vm0_vcpu_clos,
.num_pclosids = 5U,
.max_l3_pcbm = 0xff800U,
},
{
.pclosids = vm1_vcpu_clos,
.num_pclosids = 2U,
},
};
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the VCAT_ENABLED element to RDTType so that user can enable/disable vCAT globally
Add the GUEST_FLAG_VCAT_ENABLED guest flag to enable/disable vCAT per-VM.
Currently we have the following per-VM clos element in scenario file for RDT use:
<clos>
<vcpu_clos>0</vcpu_clos>
<vcpu_clos>0</vcpu_clos>
</clos>
When the GUEST_FLAG_VCAT_ENABLED guest flag is not specified, clos is for RDT use,
vcpu_clos is per-CPU and it configures each CPU in VMs to a desired CLOS ID.
When the GUEST_FLAG_VCAT_ENABLED guest flag is specified, vCAT is enabled for this VM,
clos is for vCAT use, vcpu_clos is not per-CPU anymore in this case, just a list of
physical CLOSIDs (minimum 2) that are assigned to VMs for vCAT use. Each vcpu_clos
will be mapped to a virtual CLOSID, the first vcpu_clos is mapped to virtual CLOSID
0 and the second is mapped to virtual CLOSID 1, etc
Add xs:assert to prevent any problems with invalid configuration data for vCAT:
If any GUEST_FLAG_VCAT_ENABLED guest flag is specified, both RDT_ENABLED and VCAT_ENABLED
must be 'y'
If VCAT_ENABLED is 'y', RDT_ENABLED must be 'y' and CDP_ENABLED must be 'n'
For a vCAT VM, vcpu_clos cannot be set to CLOSID 0, CLOSID 0 is reserved to be used by hypervisor
For a vCAT VM, number of clos/vcpu_clos elements must be greater than 1
For a vCAT VM, each clos/vcpu_clos must be less than L2/L3 COS_MAX
For a vCAT VM, its clos/vcpu_clos elements cannot contain duplicate values
There should not be any CLOS IDs overlap between a vCAT VM and any other VMs
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. remove HV_RAM_SIZE and CONFIG_HV_RAM_SIZE in the related python
code, schema and all existing scenario XMLs because PR 6664 has
changed it in HV side.
2. set HV_RAM_START default value to 2M.
Tracked-On: #6663
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
It is seen on some platforms that the ACPI DMAR tables will report
remapping hardware units that does not have any device under its scope,
which is not expected by the board inspector previously and thus causes the
tool to generate inconsistent configuration data.
This patch makes the board inspector skip such remapping hardware units. It
does not impact the functionality of the hypervisor as no device is managed
by those skipped remapping units.
Tracked-On: #6709
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
In commit of 7cc9c8fe06
the pre-launched VM was set to ACPI HW Reduced platform, then the IRQ
would be allocated from 0 for PCI MSI devices. The Intel igb/igc driver
might get IRQ 8 when do request irq which would conflict with the irq
of RTC device:
[ 14.264954] genirq: Flags mismatch irq 8. 00000000 (enp0s8-TxRx-3) vs.
00000000 (rtc0)
[ 14.265411] ------------[ cut here ]------------
[ 14.265508] kernel BUG at drivers/pci/msi.c:376!
[ 14.265610] invalid opcode: 0000 [#1] PREEMPT SMP
[ 14.265710] CPU: 0 PID: 296 Comm: connmand Not tainted 5.10.52-acrn-sos
-dirty #72
[ 14.265863] RIP: 0010:free_msi_irqs+0x182/0x1b0
This patch will specify some legacy PnP device like UART and RTC in ACPI
DSDT table of pre-launched VM, so that IRQs from IOAPIC pin 4/3/8 could be
preserved before MSI device requesting IRQs.
Tracked-On: #6704
Signed-off-by: Victor Sun <victor.sun@intel.com>
Remove the restriction that SERIAL_CONSOLE needs to be ttys0, ttys1,
ttys2 or ttys3.
1. Lossen the restriction in xsd.
2. Rewrite the document.
3. Refine the intx.py. Refine the logic which take effect if the <irq>
is specified in "SOS_COM#_IRQ" for SOS VM's legacy vuart 0.
Tracked-On: #6610
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
add hybrid_rt.xml file under the generic_board folder so that
UI can call pre_rt_vm type when the user clicks 'Add a VM below'
button to add a new pre_rt_vm.
Tracked-On: #6292
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
call default_populator.py to expand the default value in the
scenario XML file to fix the issue that don't export xml successfully
in UI when user to click the 'Export XML' button to export scenario xml
file because that the unexpanded xml does not conform to schema check.
Tracked-On: #6292
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
According to TCG ACPI specification (version 1.2), the current revision of
TPM2 table, which has the optional log area fields, is 4. This patch
updates the revision of vTPM2 accordingly.
Tracked-On: #6288
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
ACPI device drivers use both _HID and _CID to identify devices they
match. This patch copies _CID objects to vACPI devices so that guest
drivers can recognize the passthrough devices properly.
Tracked-On: #6288
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
If a legacy vuart base is configured as "CONFIG_COM_BASE", allocate a
base with unused io-port address with length 0x10.
The post-launched VM's unused io-port address range is [0xD00, 0xFFFF].
The pre-launched VM's unused io-port address range is [0xD00, 0xFFFF]
but the passthrough devices' io-port address are reserved.
The SOS VM's unused io-port address range is [0xD00, 0xFFFF] but any
native devices' io-port address are reserved. However, the io-port
address which is passed through to any pre-launched is reusable.
Tracked-On: #6652
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Expand the capacity of legacy vuarts per VM. This change is applied to
manual scenario xml editing only.
A SOS VM can choose io port 0x3F8, 0x2F8, 0x3E8, 0x2E8 by selecting
SOS_COM1_BASE, SOS_COM2_BASE, SOS_COM3_BASE, SOS_COM4_BASE respectively.
Non SOS VM can choose io port 0x3F8, 0x2F8, 0x3E8, 0x2E8 by selecting
COM1_BASE, COM2_BASE, COM3_BASE, COM4_BASE respectively.
For any type of VM, selecting "CONFIG_COM_BASE" allows configuration tool
to pick an available io port from hardcoded list:
['0xA000', '0xA010', '0xA020', '0xA030', '0xA040', '0xA050', '0xA060', '0xA070']
A SOS VM can choose irq 4 by selecting SOS_COM1_IRQ and SOS_COM3_IRQ, and choose irq 3 by selecting SOS_COM2_IRQ and SOS_COM4_IRQ.
Non SOS VM can choose irq 4 by selecting COM1_IRQ and COM3_IRQ, and choose irq 3 by selecting COM2_IRQ and COM4_IRQ.
For SOS VM, selecting "CONFIG_COM_IRQ" allows configuration tool
to pick an available irq based on AVAILABLE_IRQ_INFO. For non SOS VM, it
will allocate an available irq from [1, 15].
Tracked-On: #6652
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
1. move tgl-rvp and ehl-crb-b folders under data directory to 1source.
2. delete nuc7i7dnb and whl-ipc-i7 folders under data directory.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Pass through the io-ports for the passthrough pci devices of
pre-launched VM.
Three parts to support this feature:
1. Identical map the pci devices io-port address for pre-launched VM
2. Set the io-ports address range to DSDT
3. Avoid to allocate the bar index for VMSIX
Tracked-On: #6620
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Without this ``iomem=relaxed`` kernel parameter, the generated board XML
is essentially the same as having ``--basic`` when executing the board
inspector, i.e. the ACPI namespace will not be parsed. The generated
board XML may still work, but some functionality (e.g. passthru of TPM
and other PCI devices that need INTx) will no longer work due to lack of
hardware information.
Replacing PR #6618
Tracked-On: #5692
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Simplify the statement by TPM2 enablement detection and present TPM2 device.
Remove the function and move the statement to misc_cfg.h.xsl
Tracked-On: #6562
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
The default value population algorithm introduced by commit
2bfaa34 ("config_tools: populate default values in scenario XML") only
populates default values to the first occurrence of a tag when the tag is
specified to allow multiple occurrences under an xs:all node. This may lead
to incomplete scenario XML as some of the default values are missed.
This patch fixes this issue by checking **all** nodes having the same tag
under a node specified by an xs:all schema.
Fixes: 2bfaa34 ("config_tools: populate default values in scenario XML")
Tracked-On: #6292
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Now ACRN support platform which CPU numbers are large than 10. So the old value
for DEV_PATH_LEN is not enough (18 is not enough for /dev/acrn_trace_xx).
Tracked-On: #6572
Signed-off-by: Fei Li <fei1.li@intel.com>
The execution order of the "modprobe pci_stub" command is erroneous
in the launch script generation logic. The "modprobe pci_stub" command
should be executed before unbinding passthru devices, so we adjust the
command excution order.
Tracked-On: #6565
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
While we have default values of configuration entries stated in the schema
of scenario XMLs, today we still require user-given scenario XMLs to
contain literally ALL XML nodes. Missing of a single node will cause schema
validation errors even though we can use its default value defined in the
schema.
This patch allows user-given scenario XMLs to ignore nodes with default
values. It is done by adding the missing nodes, all containing the defined
default values, to the input scenario XML when copying it to the build
directory. This approach imposes no changes to either the schema or
subsequent scripts in the build system.
Tracked-On: #6292
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
In e2fsprogs v1.46.2, s_volume_name is defined with attribute
nonstring. According to gcc doc, nostring defined string may
not contain a terminating NULL. So array safed function should
be used.
We use strncmp instead of strcmp to do comparing here.
Tracked-On: #6494
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
1. For initial UI, rename "ACRN Config" to "ACRN Configurator",
rename "Scenario Setting" to "Scenario Settings", rename "Launch Setting"
to "Launch Settings", and rename "Import Board info" to "Import Board XML";
2. For UI scenario selection, change title "Load Scenario Setting" to
"Load Default Scenario Settings", Change title "Save as" to "Save Scenario XML",
and rename "XML Name" to "Scenario XML Name";
7. For UI launch selection, rename "Load Launch setting" to
"Load Default Launch Settings", change title "Save as" to "Save Launch XML",
change "XML Name" to "Launch XML Name" and Change "Source Path" to "Launch XML Path".
Tracked-On: #6417
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The pattern matching logic (used by 'tr') is erroneous in the launch
script generation logic. While its purpose is to return the CPU number
from the 'cpuX' string (where 'X' is the CPU number),
it does it incorrectly for any multiple of 10. Examples:
- Processing 'cpu10' returns 1 (instead of 10)
- Processing 'cpu20' returns 2 (instead of 20)
This patch changes the [1-99] pattern matching to [0-9] which fixes it.
This error led to the incorrect CPU cores being used (and offlined)
for some VMs which could lead to confusing problems especially when
an exclusive use of that CPU core was assumed and expected (e.g. RTVM).
when CONFIG_BOOTPARAM_HOTPLUG_CPU0 is turned on in the kernel,
there is a risk that we try to offline cpu0. So we also add extra check
for cpu0 to aviod the risk.
Tracked-On: #6482
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The whitespaces between delimiter saperated elemnts of a list causes
acrn:get-common-clos-max and acrn:find-list-min returns unexpected
numbers.
Translate the whitespaces to nothing and rewrite acrn:find-list-min and
acrn:get-common-clos-max.
Tracked-On: #6515
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
rename the industry folder to shared folder ,and also rename the
logical_partition folder to partitioned under the generic_code directory.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. Rename industry.xml to shared.xml
2. Rename logical_partition.xml to partitioned.xml.
3. Update the name in view.py correspondingly.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
