this patch fix following violations:
- Use of single line comment(s).
- Logical conjunctions need brackets.
- More than one break or goto statement in loop.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
This patch does the following changes
According to VT-d spec Section 6.8 "Write Buffer Flushing" DRAM write buffers
are flushed implicitly upon Remapping Hardware Caches Invalidation even on
platforms that set RWBF to 1 in capability register. So removed write buffer
flushing as current ACRN issues cache invalidation commands in all cases.
Tracked-On: #1855
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on Procedure has more than one exit point.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on Pointer not checked for null before use.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on logical conjunctions need brackets.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fix MISRA-C violations in arch/x86/vtd.c
on pointer param should be declared pointer to const.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fix the MISRA-C violations in arch/x86/vtd.c
on scope of variable could be reduced.
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For security, this patch add one flag per vm and disable snoop control
for sos and enable snoop control for uos by default.
v2: add one flag in vm, not in iommu domain.
v3: add vm null check
Tracked-On: #2086
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Identifier reuse may arise confusion. So should minimize the case of it
as much as possible. This patch is try to do this except the PCI related
module.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
- replace CPU_PAGE_SHIFT with PAGE_SHIFT
These two MACROs are duplicated and PAGE_SHIFT is a more
reasonable name.
- remove unused MACROs related to page shift in cpu.h
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
replace CPU_PAGE_SIZE with PAGE_SIZE
These two MACROs are duplicated and PAGE_SIZE is a more reasonable name.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IEC 61508,ISO 26262 standards highly recommend single-exit rule.
Reduce the count of the "return entries".
Fix the violations which is comply with the cases list below:
1.Function has 2 return entries.
2.The first return entry is used to return the error code of
checking variable whether is valid.
Fix the violations in "if else" format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA-C requires that if the return value of a function call is
assigned to a local variable, this value shall be used in all paths.
This patch moves the variable assignment right before the moment that
the variable is used.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. use error code defined in errno.h instead of 1.
2. panic if error occured while adding devices to VM0 domain.
3. panic if failed to reqeust irq for iommu.
The two panic added would only occurs before any VM starts running.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In current code, DMA remapping is enabled at very early stage, when there is no
device added.
Devices are added to VT-d context table when creating VMs.
There is potential risk that there may be device DMA transactions when DMA remapping is
enabled, but the device is not added to the VT-d context table. (Eg. this could happen in UEFI
enviroment when USB keyboard use in efi intenal shell.)
This patch defers DMA remapping enabling until vm creation.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current code doesn't init interrupt config when resume from S3.
The related register contect will be lost during S3.
This patch re-init these regiters.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Add an internal API to do action according to action function provided,
which can simplify the code.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Move move public API to the bottom part of the file.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Becuase the number of character of a line is 120.
Merge lines for a statement if needed.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
dmar_uint -> dmar_unit
remove i in line 756 added by accident.
Tracked-On: #1855
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Due to the side-effect to cache of "wbinvd" instruction, just apply it
in case of noncoherent DMA.
Tracked-On: #1824
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
In current code, there is an out of range access to the array buses defined in struct struct context_table.
This patch defines CONFIG_IOMMU_BUS_NUM to replace CONFIG_IOMMU_INIT_BUS_LIMIT, which is clearer.
CONFIG_IOMMU_BUS_NUM equals to (CONFIG_IOMMU_INIT_BUS_LIMIT + 1).
Tracked-On: #1807
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Misra C reqires assembly code should comply with
the rules list below:
The assembly code's functionality should match the function's
name.If not,pls encapsulate the assembly code and give a suitable
name for describing the functionality.
V1->V2:
1.remove the dead code
2.update detail comment
V2->V3:
1.replace the macro name with upper case.
2.remove the typedef and rename the struct name
"_descriptor_table_" to "descriptor_table".
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use pre-defined inline function for pci bus/slot/function calculation.
Tracked-on: #1747
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Fix the integer violations related to the following rules:
1. The operands to shift operations (<<, >>) shall be unsigned
integers.
2. The operands to bit operations (&, |, ~) shall be unsigned
integers.
- Replace 12U with CPU_PAGE_SHIFT when it is address shift case.
v1 -> v2:
* use existed MACRO to get bus/slot/func values
* update PCI_SLOT MACRO to make it more straightforward
* remove the incorrect replacement of 12U with CPU_PAGE_SHIFT
dmar_fault_msi_write
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For data structure types "struct vm", its name is identical
with variable name in the same scope. This is a MISRA C violation.
Naming convention rule:If the data structure type is used by multi
modules, its corresponding logic resource is exposed to external
components (such as SOS, UOS), and its name meaning is simplistic
(such as vcpu, vm), its name needs prefix "acrn_".
The following udpates are made:
struct vm *vm-->struct acrn_vm *vm
Tracked-On: #861
Signed-off-by: Xiangyang Wu <xiangyang.wu@linux.intel.com>
For partition mode, there is no vm0_domain created for iommu.
In current code, it will return error when try to remove a device
from vm0_domain, which casue failure of device assignment in
partition mode.
Tracked-On: #1680
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The operands to shift operations (<<, >>) shall be unsigned integers.
v1 -> v2:
* replace 12U with CPU_PAGE_SHIFT when it is address shift case.
* replace 6UL with 0x6UL
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Replace list of iommu_domains with static array
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Predefine a dmar_drhd_rt table for all possible dmar unit
Tracked-On: #861
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When drdh_info_array[0].ignore = false with partition mode enabled,the following
assert error will be triggered when trying to boot vm:
Assertion failed in file arch/x86/vtd.c: fatal error
The root cause is that root_table_addr reading from CPU3(vm2's bsp) is NULL.
This patch move the init_iommu which initialize root_table_addr before starting
secondary cores and flush the cache at the end if the function to avoid getting
NULL pointer from secondary cores.
Tracked-On: #1160
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Binin Wu <binbin.wu@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
Return value should be checked,fix it by add
"void" when the function return value is not used.
V1->V2:
replace printf with pr_warn.
V2->V3:
change the commit to make read easily.
Tracked-On:#861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add missing brackets for 'if/else' statements based on MISRA-C
requirements
v1 -> v2:
* add brackets for each conditions in 'if' statements to improve
the readability
* modify 'ptdev_init' to make the logic clearer
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Currently, hypervisor doesn't have the information of pci devices
on the platform when init. In order to reduce boot time and memory
usage, hypervisor set a bus limitation for pci devices when init vtd.
However, maximum bus number varies on different platforms.
This patch add a config for the bus limitation.
Set 0xF as the default value for the maximum bus number on sbl platform.
Set 0xFF as the default value for the maximum bus number on uefi platfrom.
Tracked-On: #1339
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC checks whether a variable is assigned a value not used in
all branches of a program. Var value which is unused on all paths
can be removed with a consequent improvement in the readability
and efficiency of the code. This patch is used to fix these
violations.
Tracked-On: #861
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Current code enables IOMMU from init_iommu_vm0_domain which is called
from vm0/sos boot sequence. For partition mode VMs, this is not called as
VMs are numbered from 1.
This patch adds support to initialize root table pointer for each IOMMU
and enable all IOMMUs from init_iommu. Hence IOMMUs are enabled even
though ACRN does not boot vm0.
This patch also has changes to fix#1270.
Tracked-On: #1246#1270
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
MISRA-C states that redundant macros reduce the maintainability of code.
In some cases, we would like to keep the current unused macros for code
completeness, such as cpu registers. These macros might be used later.
This patch removes some unused macros that is not critical for code
completeness.
v1 -> v2:
* Keep TRUSTY_VERSION in trusty.c.
Yadong will cook another patch which will utilize TRUSTY_VERSION.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
