The commit of da81a0041d
"HV: add e820 ACPI entry for pre-launched VM" introduced a issue that the
base_hpa and remaining_hpa_size are also calculated on the entry of 32bit
PCI hole which from 0x80000000 to 0xffffffff, which is incorrect;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Change shared memory name prefix from sos to dm
Change shared memory size unit from byte to megabyte
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Ivshmem hv-land solution emulates the ivshmem device in hypervisor
and the shared memory is reserved in the hypervisor's memory space.
And it can provide inter-vm communication for both pre-launched and
post-launched VMs.
This patch introduces the ivshmem hv-land solution including what
ivshmem hv-land is and how to use it.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
increase the length of DSDT table to avoid memory overwrited by
subsequent ACPI tables.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add TSN device OTN1 config into offline ACPI table for TSN device
passthrough to pre-launched RTVM.
v2) update TSN device list from bdf list to vid:pid list.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Use vm_type to configure the load_type/uuid/severity,
Delete uuid lines in config scenario.
Tracked-On: #4641
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
add extern acrn_vm_pci_dev_config variables in vm_configuration.c
when ivshmem configured on scenarios with ivshmem configured.
Tracked-On: #5298
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Fix the folder name where the 'acrn-manager' source code is located.
Replace instances of 'UOS' by 'User VM'
Other minor text updates to improve readability
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
generate ASL code of ACPI tables for pre-launched VMs on nuc7i7dnb,
whl-ipc-i5, whl-ipc-i7, ehl-crb-b boards
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the UPRINTF to pr_* based log interface for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Refine the DPRINTF/WPRINTF to pr_* based log interface instead of printf directly.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Unifies the logs to pr_* interfaces instead of printf for better log management.
Tracked-On: #5267
Signed-off-by: Sun Peng <peng.p.sun@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
meta-acrn is a Yocto Project layer repo with recipes for building a
Service and User VM OS using Yocto Project. While the information there
is sparse, for the experienced YP developer is might be enough.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
On a PCI type HV uart, the bdf value is in a union together with
mmio_base_vaddr, then the value would be overridden by mmio_base_addr
in uart16550_init(), result in is_pci_dbg_uart() returns a wrong value
and then uart hang.
Tracked-On: #5288
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
enable TPM2 config on ehl-crb-b board and update TPM2 configs on
legacy boards.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
For EHL hybrid_rt scenario, the requirement needs a network device
passthough to pre-launched VM0.
Tracked-On: #5286
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add 2 MACROs: DEFAULT_PCI_MMCFG_START_BUS and DEFAULT_PCI_MMCFG_END_BUS
in platform_acpi_info.h.
Tracked-On: #5233
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add 2 MACROs: DEFAULT_PCI_MMCFG_START_BUS and DEFAULT_PCI_MMCFG_END_BUS
in platform_acpi_info.h.
Tracked-On: #5233
Signed-off-by: Shixiong Zhang <shixiongx.zhang@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Per PCI Firmware Specification Revision 3.0, 4.1.2. MCFG Table Description:
Memory Mapped Enhanced Configuration Space Base Address Allocation Structure
assign the Start Bus Number and the End Bus Number which could decoded by the
Host Bridge. We should not access the PCI device which bus number outside of
the range of [Start Bus Number, End Bus Number).
For ACRN, we should:
1. Don't detect PCI device which bus number outside the range of
[Start Bus Number, End Bus Number) of MCFG ACPI Table.
2. Only trap the ECAM MMIO size: [MMCFG_BASE_ADDRESS, MMCFG_BASE_ADDRESS +
(End Bus Number - Start Bus Number + 1) * 0x100000) for SOS.
Tracked-On: #5233
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
compile ACPI tables for pre-launched VMs to one binary when pre-build
hypervisor.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
use offline tool to generate one binary of ACPI tables for pre-launched
VMs, then load the ACPI binary into guest physical memory as grub module.
Users can configure the resources or devices like TPM2 for the
pre-launched VM from sceanrio XMLs or UI, and the offline tool will
generate ASL code of the ACPI tables with the configured resources or
devices, then compile the ASL code to one binary when building ACRN.
Tracked-On: #5266
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The old method of build pre-launched VM vacpi by HV source code is deprecated,
so remove related source code;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we use a pre-defined structure as vACPI table for pre-launched
VM, the structure is initialized by HV code. Now change the method to use a
pre-loaded multiboot module instead. The module file will be generated by
acrn-config tool and loaded to GPA 0x7ff00000, a hardcoded RSDP table at
GPA 0x000f2400 will point to the XSDT table which at GPA 0x7ff00080;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the ACPI table was stored in F segment which might not be big
enough for a customized ACPI table, hence reserve 1MB space in pre-launched
VM e820 table to store the ACPI related data:
0x7ff00000 ~ 0x7ffeffff : ACPI Reclaim memory
0x7fff0000 ~ 0x7fffffff : ACPI NVS memory
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
EHL PSE TSN GbE driver is default set to use 32bit of dma addressing.
net: stmmac: configure PSE Gbe to 32bit dma addressing
https://github.com/intel/linux-intel-lts/commit/011c8f
When VM has more than 4GB physical memory, Linux kernel uses the bounce
buffers (swiotlb) to translate kernel data in 64bit memory to 32bit
range for the sake of the DMA because iommu is not available. The
default swiotlb value 32768 is insufficient to support two PSE TSN GbEs
at the same time. Increase the value to 131072 otherwise two GbEs can't
link up.
Tracked-On: #5243
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
When creating a new launch setting, config app can't fine the
scenario config which caused the app failed to load the new
launch setting.
Tracked-On: #5282
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Build and install 'acrnctl' for regardless of the RELEASE value. Kata Containers
depends on 'acrnctl' in order to work correctly and we therefore need to make
sure that it is built and installed correctly regardless of whether this is a
debug or a release build.
Tracked-On: #4940
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add a new scenario xml file for EHL which is derived from hybrid_rt for
validation of certain passthru devices in prelaunched RTVM. Because the
configuration requires to disable GPIO support for SOS VM, it should
not be merged into the standard hybrid_rt scenario. According to this
change, remove the SCI passthru setting from existing hybrid_rt since
from now on hybrid_rt_fusa should be used for SCI passthru test.
Tracked-On: #5278
Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
hv: vpci: Add 0x45, which is the high-byte of device id of EHL,
to the enumeration array in vhostbridge.c. This is to fix the
problem that PCIe extended capabilities like SR-IOV cannot be
used on EHL.
Tracked-On: #5256
Signed-off-by: Qian Wang <qian1.wang@intel.com>
minor_ver should be le 2 when major_ver == 2.
Tracked-On: #5276
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previously the min load_addr for HV image is hard coded to 0x10000000 when
CONFIG_RELOC is enabled, now use CONFIG_HV_RAM_START as its prefer minimum
address like setting of CONFIG_PHYSICAL_START do in Linux kernel.
With this patch, we can offload the CONFIG_HV_RAM_START algorithm to
acrn-config or manually set it in scenario XML on some special boards.
Tracked-On: #5275
Signed-off-by: Victor Sun <victor.sun@intel.com>
update the size of ivshmem memory region to [2MB, 512MB].
Tracked-On: #4853
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Yuan Liu <yuan1.liu@intel.com>
