Different from other nodes which have static default values, the virtual
BDF nodes of virtual UART endpoints or IVSHMEM interfaces have a set of
default values and should be used with uniqueness guaranteed. The existing
default value mechanism in XSD does not include support for this.
This patch adds two more ACRN-specific annotations, namely `acrn:defaults`
and `acrn:unique-among`, that have the following semantics.
- `acrn:defaults` is a Python expression that evaluates to an iterable.
- `acrn:unique-among` is an xpath that specifies the nodes. Each node
within the select ones shall have a value unique among them. The xpath
is evaluated with the variable `parent` defined as the parent node
under which the vBDF node is to be appended.
Tracked-On: #7330
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Add documentation for enumerated types and value restrictions so it
shows up in the option documention. Also add additional acrn:title
annotations.
Tracked-On: #5692
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Documentation continuation lines must not be indented unless required by
rst syntax.
Added some type explations for enumerations, but would be better to
generate the enumeration values by scanning the tree. Figure that out in
another PR. (This would prevent the documented list of values from
being out of sync with the actual list of values in the enumeration.)
Tracked-On: #5692
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Because Board Inspector modifies the SR-IOV function,
VF information is correctly captured when Board Inspector
collects Board information. So update the board xmls
Tracked-On: #7031
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
Bugfix:bootargs is optional parameter, which may be not
present in xml as a node, asl_gen.py needs to process
that case.
Tracked-On: #7307
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
The GPA SSRAM area size in pre-launched VMs was hard-coded to 8MB.
Since this area is mapped from host SSRAM area, it will cause compile
problem when host's SSRAM area is larger than 8MB.
To solve this issue, we have to calculate SSRAM area's size in
gpa.py, and generate a macro PRE_RTVM_SW_SRAM_MAX_SIZE for HV
to use.
PRE_RTVM_SW_SRAM_START_GPA/END_GPA can be calculated by end/size
in HV, so they are removed.
When SSRAM is not configured in the system, PRE_RTVM_SW_SRAM_MAX_SIZE
is set to 0.
Crl_bin is not needed in guest. So it's size is removed in bin_gen.py.
Tracked-On: #7212
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
This patch adds logic to the extractors to fetch the following information.
1. All the details of an SR-IOV capability, which are reported in the
SR-IOV extended capability structure.
2. Correctly report the vendor ID, device ID and BAR addresses of VFs.
3. Refer each VF back to the corresponding PF. Use XPATH to search for
all the VFs enabled by a PF.
Tracked-On: #7301
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
This patch adds the logic needed to fully parse an SR-IOV extended
capability structure. Such information will later be used to extract all
information about physical and virtual functions.
Tracked-On: #7301
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
In order to ease the access of certain capability structure of a PCI config
space, this patch changes the class PCIConfigSpace to maintain a
_caps_as_dict dictionary that maps capability names (as specified in the
caps.py and extcaps.py) to the actual capability structures.
Tracked-On: #7301
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
We have redesigned Virtio devices, so this patch updates
the upgrader.py script for them.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
1. for virtio console, reference to the document
https://projectacrn.github.io/latest/developer-guides/hld/virtio-console.html,
the generated launch script will look like this:
`virtio-console,[@]stdio|tty|pty|file:portname[=portpath]\
[,[@]stdio|tty|pty|file:portname[=portpath][:socket_type]]`
*receding with @ marks the port as a console port,
otherwise it is a normal virtio-serial port
*The portpath can be omitted when backend is stdio or pty.
2. for virtio input, the generated launch script as below.
`<name>:<phys>,id=<anyString>`
The launch script will automatically find the specific /dev/input/eventX
according to the event name and phys got from board.xml.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
We have redesigned Virtio and UI for user, so this patch updates the schema
for the new design.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
default value of minOccurs is "1", which will trigger problem
when user leave pcpu_id blank while preserve cpu_affinity in
service VM.
Tracked-On: #7267
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
Service vm could have the combination of big and
little core cpu_affinity setting, fix the assert.
Tracked-On: #7270
Signed-off-by: hangliu1 <hang1.liu@linux.intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
remove board and scenario attributes dependency for new configuration.
To do:
will remove board and scenario attributes in all scenario XML files
and update the upgrader.py after the new configuration works.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The device-model land ivshmem regions are not properly generated into the launch
scripts today because:
1. Those regions are provided by "Device Model", not "Device model".
2. VM names are not properly encoded in the XPATH that search for the
ivshmem regions accessible to a VM.
This patch fixes both issues.
Fixes: 0d84ecc4a ("config_tools: merge data in launch XMLs into scenario XMLs")
Tracked-On: #6690
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Because the board inspector update uses XPATH
to extract available PCI devices or serial ports,
So the board xmls need to be updated for all boards.
Tracked-On: #6690
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
1. check if VMX feature is enabled in the BIOS setting.
If disabled, board inspector will show error message.
2. check if Hyper-Threading is enabled in the BIOS setting.
If enabled, board inspector will show warning message.
3. check if VT-d is enabled in the BIOS setting.
If disabled, board inspector will show error message.
v2-->v3:
Use the class names instead of addresses, and invoke the rdmsr method
of each class.
v1-->v2:
1. For the Hyper-Threading BIOS check, update the log level to the warning.
2. For VMX invalid BIOS check, the XDS does the actual check,
the board inspector only collects information.
Tracked-On: #6689
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add CPU capability checks.
If a feature is not supported on this processor, the board inspector
will show error message because it would impact ACRN’s ability
to function properly.
v3-->v4:
Update the error messages.
v2-->v3:
1. For VMX features, split each feature as a separate property, capability
checks in XML schema will then check all those features.
2. Use the class names instead of addresses, and invoke the rdmsr method
of each class.
v1-->v2:
1. Define each register as a class inheriting the `MSR` class defined
in platformbase.py, and define each bit as fields of that class.
2. The board inspector simply collects the CPU capability and attribute,
and the XSD does the actual check
Tracked-On: #6689
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
This patch adds schema-based board checks mechanism.
This provides integrators with a mechanism that XSD does
the actual board data check.
Tracked-On: #6689
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
For post-launched RTVM, the acrn-dm can own PMU_PASSTHROUGH flag; for
pre-launched RTVM, need set it in configuration file by default.
Tracked-On: #6966
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
This patch extracts all serial ttys in the native environment and updates
the XML schema to specify the XPATH that evaluates to the available ttys
for users to choose as the hypervisor console port.
Tracked-On: #6690
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Add a new extractor 70-device-classes.py which extracts virtio device
input basic information such as: name and phys.
An example:
<device_classes>
<inputs>
<input>
<name>Power Button</name>
<phys>LNXPWRBN/button/input0</phys>
</input>
<inputs>
</device_classes>
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
This patch adds the BDF (in the format BBBB:DD.F) of each PCI device into
its description, which helps the configurator to fetch all available PCI
devices via XPATH rather than text manipulating functions.
Tracked-On: #6690
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
In the old days SERVICE_VM was also an acceptible VM type. It is now converted
to the load_order, with the vm_type field replaced by STANDARD_VM. This patch
adds this conversion logic into the upgrader.
Tracked-On: #6690
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Since PR #6943 has landed, the `CONFIG_IOMMU_BUS_NUM` has been renamed
to `ACFG_MAX_PCI_BUS_NUM`, this patch removes the obsolete code about
`CONFIG_IOMMU_BUS_NUM`.
v1-->v2:
Update the upgrader.py to add a description of this obsoleted item.
Tracked-On: #6942
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
If user add the specific mac address (eg: mac=00:16:3E:77:A9:41)
in launch script, we will get the device name with the specified mac address.
This is unexpected. This patch updates the parser to fix the issue.
v1-->v2:
Update the parser with regex.
Tracked-On: #7197
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Since PR #7185 has removed the assume of virtio-net device name,
we also remove it in the launch script generation logic.
Tracked-On: #6690
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Because there is no SDC scenario in the generic template,
We remove the SDC specific scenario
Tracked-On: #6701
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
The next-generation ACRN configurator will embed a Python interpreter built
in WebAssembly (WASM) for executing Python scripts for manipulating
scenario schemas and validating user data. It is quite tedious to
separately import multiple modules there due to the restriction of that
Python environment. The recommended approach is to package those
modules (e.g. as a *.wic file) so that all modules can be imported in one
shot.
This patch adds the files needed to package the scripts. The package is
solely used for the configurator to import and not intended to be used by
end users for any purpose.
v1 -> v2:
* Fix the license header of __init__.py
* Move patterns of ignored files to the top-level .gitignore
Tracked-On: #6691
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The Service VM needs a 'serial.conf' file to recognize and use
non-standard vUART with the 'setserial' package.
The logic of create serial.conf should update after we move vUART
connection to global and use endpoint to replace the target VM id.
This patch select the new vUART connection and check whether one of the
endpoint is Service VM, if yes, then check the io_port and record it
when the vUART is non-standard.
All these non-standard vUART will be written to the serial.conf.
Tracked-On: #6690
Reviewed-by: Junjie Mao junjie.mao@intel.com
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
