For now, BOARD should use the qemu-riscv for risc-v.
For RISC-V:
make hypervisor BOARD=qemu-riscv SCENARIO=shared ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu-
For x86:
make hypervisor BOARD=qemu SCENARIO=shared [ARCH=x86]
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Only x86 has local APIC pass-thru. For release mode, the console_vmexit_callback
is empty, complier should optimize this unuseful check.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Now doesn't want introduce the PCI module since PCI CFG access should be arch
special.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
get_vm_from_vmid,is_paused_vm and is_poweroff_vm should be common APIs.
But now doesn't implement them as common for not introduce more VM related
data structure and APIs.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
send_single_ipi/send_dest_ipi_mask are calling sbi_send_ipi. According
to SBI spec:
- uint64_t hart_mask is a scalar bit-vector containing hartids
- uint64_t hart_mask_base is the starting hartid from which the
bit-vector must be computed
Logical pCPU ID and pCPU ID mask need to be converted to physical hart
ID mask and physical hart ID base.
Tracked-On: #8811
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
MMIO read/write without memory order should be common ARCH, without
PIO support shouldn't use PIO APIs, so implement them as empty.
Tracked-On: #8807
Signed-off-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
init sched and call run_idle_thred in init_pcpu_comm_post to switch to idle
thread after AP initialization finish.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
implement arch_cpu_dead and arch_cpu_do_idle for riscv, arch_cpu_dead and
arch_cpu_do_idle will be called by common module.
Tracked-On: #8812
Signed-off-by: Haicheng Li <haicheng.li@outlook.com>
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
cpu_dead calls arch_cpu_dead, cpu_do_idle calls arch_cpu_do_idle,
arch_cpu_dead and arch_cpu_do_idle are required to be implemented by
each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
stack_frame is not only for vcpu thread, host thread needs
it, so move stack_frame out of vcpu file.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
delivery mode and idle mode are x86 specific percpu, so move it from common to
x86 arch, also change the name of mode_to_idle to be idle_mode, change the name
of mode_to_kick_pcpu to be kick_pcpu_mode.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add arch_send_reschedule_request, which is called by make_reschedule_request, for X86
arch_send_reschedule_request will call kick_pcpu, arch_send_reschedule_request is arch
public API, which is needed to be implemented by each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch calls timer_init() to initialize timer for
pcpu on risc-v platform.
Tracked-On: #8816
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Convert IRQ-related macros to static inline functions and introduce
wrappers for arch-specific implementations. This follows the style we
defined for multi-arch development.
This is a follow-up update for commit
a7239d126 ("[FIXME] hv: risc-v add denpended implementation in cpu.h").
CPU_IRQ_ENABLE_ON_CONFIG -> local_irq_enable
CPU_IRQ_DISABLE_ON_CONFIG -> local_irq_disable
CPU_INT_ALL_DISABLE -> local_irq_save
CPU_INT_ALL_RESTORE -> local_irq_restore
Tracked-On: #8813
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
This patch implements interrupt initialization and the basic
exception/interrupt handling flow on RISC-V.
init_interrupt() needs to be invoked during CPU initialization to
set up the trap vector and enable the interrupt.
RISC-V exception and interrupt handling includes:
- Saving and restoring CPU registers around traps
- Implementing handlers for:
- Supervisor software interrupt
- Supervisor timer interrupt
- Halting the CPU for all other interrupts and exceptions
------
TODOs:
1. add support for registering interrupt handlers via request_irq() and
further adoption of the common IRQ framework.
2. add support for external interrupt.
Tracked-On: #8813
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Co-developed-by: Shiqing Gao <shiqing.gao@intel.com>
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Enable acrnlog (memory logging) in release builds, default log level
is still controlled by DEBUG_OPTIONS/MEM_LOGLEVEL in scenario file.
Tracked-On: #8805
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Without -fpie or -fno-pie specified in the CFLAGS and ASFLAGS, different
versions of riscv64-linux-gnu-gcc have different behavior, for example,
Ubuntu 13.3.0-6ubuntu2~24.04 will compile as if -fpie, but 15.1.0 will
compile as if -fno-pie. To make the build consistent specify -fpie when
CONFIG_RELOC=y and -fno-pie otherwize explicitly.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch adds the basic logics to bring up all APs in the C
entry of BSP boot. The mapping between logcial CPU IDs and physical
hart IDs is setup based on the pre-generated data from config tool
by parsing the device tree. Logical CPU ID BSP_CPU_ID will always
map to the BSP hart ID. The per pCPU logic ID is saved in tp register.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extension Zihintpause (Pause hint) is mandatory for RVA23. asm_pause
is implemented based on "pause" instruction.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use tp register to hold the current logical CPU ID. This follows the
same design as x86 which uses MSR_IA32_SYSENTER_CS for the same purpose.
riscv uses SBI HSM to start the APs.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This is just for temporary build and should be reverted when
common debug module is integrated.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The following pcpu related interfaces are moved into common:
- common/cpu.c::start_pcpus
- include/common/cpu.h::get_pcpu_id
- include/common/cpu.h::set_current_pcpu_id
Their arch specific implementations are moved into arch/$(ARCH):
- arch/$(ARCH)/cpu.c::arch_start_pcpu
- include/arch/$(ARCH)/asm/cpu.h::arch_get_pcpu_id
- include/arch/$(ARCH)/asm/cpu.h::arch_set_current_pcpu_id
The following interface is moved into common:
- pcpu_set_current_state (from arch/x86/cpu.c -> common/cpu.c)
The following MACROs are moved into include/common/cpu.h:
- CPU_UP_TIMEOUT
- CPU_DOWN_TIMEOUT
- BSP_CPU_ID
- INVALID_CPU_ID
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extract common interface to include/lib/bits.h, and invoke the variant
implementation of arch.
Re-implement unlocked functions as C in common library.
Rename bitmap*lock() to bitmap*(), bitmap*nolock() to bitmap*non_atomic().
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extract common interface to include/lib/spinlock.h, and invoke the
variant implementation of arch.
Refine assemble macro code in case that ASSEMBLER defined.
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Move phys_cpu_num and pcpu_active_bitmap to common, which could be
only accessed by interfaces provided by smp.h.
v2->v3:
1. move ALL_CPUS_MASK/AP_MASK to common cpu.h
v1->v2:
1. preserve phys_cpu_num in x86 but implement arch_get_num_available_cpus()
to provide interface for common code to access.
2. change function name test_xx to check_xx
Tracked-On: #8801
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Move x86 architecture dependent per cpu data into a
seperate structure and embeded it in per_cpu_region.
caller could access architecture dependent member by
using prefix 'arch.'.
v2->v3:
move whose_iwkey, profiling_info and tsc_suspend to x86
v1->v2:
rebased on latest repo
Tracked-On: #8801
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Reviewed-by: Chen, Jian Jun<jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Since there is no common IPI abstraction, the arch_ prefix is redundant.
This patch renames the functions as follows:
- arch_send_dest_ipi_mask -> send_dest_ipi_mask
- arch_send_single_ipi -> send_single_ipi
Tracked-On: #8799
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
This patch implements risc-v specific timer codes. Basically,
risc-v adapts to acrn timer framework with some specific
behaviors. So far, it enables sstc support in h-mode.
Tracked-On: #8792
Signed-off-by: Haicheng Li <haicheng.li@outlook.com>
Co-developed-by: Yong Li <yong.li@intel.com>
Signed-off-by: Yong Li <yong.li@intel.com>
Co-developed-by: Yi Y Sun <yi.y.sun@intel.com>
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For arch specific codes, we use arch_xxx() to name the function.
So, rename cpu_ticks/cpu_tickrate/set_hw_timeout/init_hw_timer
to follow this convention. Then, use arch interface to set timeout
value in update_physical_timer().
Furthermore, remove hw_timer.h and move its contents into common/
timer.h.
Tracked-On: #8792
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The following tasks are done for both BSP and APs:
- Mask all interrupts
- Disable FPU
- Setup stack
- Jump to the C entry of BSP/AP initialization
Additionally, clear BSS sections during BSP boot before
jumping to the C entry point.
Tracked-On: #8788
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Co-developed-by: Haicheng Li <haicheng.li@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch:
- abstracts the common logic from existing x86 implementation
- moves x86-specific logic to arch/x86/notify.c
A new common/notify.{c,h} is introduced to provide a common SMP call framework for
multi-arch support in ACRN.
arch-specific files such as arch/{x86,riscv}/notify.c is aim to provide the
corresponding implementations respectively.
The framework provides the following common APIs:
- init_smp_call(): initialize the SMP call support during pCPU initialization
- handle_smp_call(): execute the SMP call notification handler
- smp_call_function(): trigger the SMP call request to target pCPUs
Other SW modules should invoke these common APIs to perform arch-independent
SMP operations.
Two arch-specific hooks are abstracted:
- arch_smp_call_kick_pcpu():
- On x86, special handling is required when LAPIC is passthrough.
- On RISC-V, a plain IPI is sufficient to kick the target pCPU.
- arch_init_smp_call():
- On x86, CPU initialization reserves dedicated vectors and
registers callback handlers for purposes such as notifications
or posted interrupts.
- On RISC-V, no special handling is required at present; this
can be extended in the future if needed.
----------
Changelog:
* Merged the following two patches into one:
[RFC PATCH v2 4/7] hv: introduce common/smp.{c,h}
[RFC PATCH v2 5/7] hv: smpcall: x86: adapt to common SMP call
Tracked-On: #8786
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Rename send_single_ipi() and send_dest_ipi_mask() to
arch_send_single_ipi() and arch_send_dest_ipi_mask() in x86, to make the
naming consistent with the RISC-V implementation and reflect that these
functions are arch-specific.
Tracked-On: #8786
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
