Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch adds a function elf_loader() to load elf image.
It checks the elf header, get its 32/64 bit type, then calls
the corresponding loading routines, which are empty, and
will be realized later.
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to make better sense, vm_elf_loader, vm_bzimage_loader and
vm_rawimage_loader are changed to elf_loaer, bzimage_loaer and
rawimage_loader.
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove the acpi loading function from elf_loader, rawimage_loaer and
bzimage_loader, and call it together in vm_sw_loader.
Now the vm_sw_loader's job is not just loading sw, so we rename it to
prepare_os_image.
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vboot_info.h declares vm loader function also, so rename the file name to
vboot.h;
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch splits the vm_load.c to three parts, the loader function of bzImage
kernel is moved to bzimage_loader.c, the loader function of raw image kernel
is moved to rawimage_loader.c, the stub is still stayed in vm_load.c to load
the corresponding kernel loader function. Each loader function could be
isolated by CONFIG_GUEST_KERNEL_XXX macro which generated by config tool.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Change if condition to switch in vm_sw_loader() so that the sw loader
could be compiled conditionally.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we only support loading raw format of zephyr image as prelaunched
Zephyr VM, this would cause guest F segment overridden issue because the zephyr
raw image covers memory space from 0x1000 to 0x100000 upper. To fix this issue,
we should support ELF format image loading so that parse and load the multiple
segments from ELF image directly.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When guest kernel has multiple loading segments like ELF format image, just
define one load address in sw_kernel_info struct is meaningless.
The patch removes kernel_load_addr member in struct sw_kernel_info, the load
address should be parsed in each specified format image processing.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The previous code did not load bzImage start from protected mode part, result
in the protected mode part un-align with kernel_alignment field and then cause
kernel decompression start from a later aligned address. In this case we had
to enlarge the needed size of bzImage kernel to kernel_init_size plus double
size of kernel_alignment.
With loading issue of bzImage protected mode part fixed, the kernel needed size
is corrected in this patch.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
When LaaG boots with bzImage module file, only protected mode code need
to be loaded to guest space since the VM will boot from protected mode
directly. Futhermore, per Linux boot protocol the protected mode code
better to be aligned with kernel_alignment field in zeropage, otherwise
kernel will take time to do "rep movs" to the aligned address.
In previous code, the bzImage is loaded to the address where aligned with
kernel_alignment, this would make the protected mode code unalign with
kernel_alignment. If the kernel is configured with CONFIG_RELOCATABLE=n,
the guest would not boot. This patch fixed this issue.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch moves get_bzimage_kernel_load_addr() from init_vm_sw_load() to
vm_sw_loader() stage so will set kernel load address of bzImage type kernel
in vm_bzimage_loader() in vm_load.c.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch moves get_initrd_load_addr() API from init_vm_sw_load() to
vm_sw_loader() stage. The patch assumes that the kernel image have been
loaded to guest space already.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
In load_sw_modules() implementation, we always assuming the guest kernel
module has one load address and then the whole kernel image would be loaded
to guest space from its load address. This is not true when guest kernel
has multiple load addresses like ELF format kernel image.
This patch removes load_sw_modules() API, and the loading method of each
format of kernel image could be specified in prepare_loading_xxximage() API.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
We should not hardcode the VM ramdisk load address right after kernel
load address because of two reasons:
1. Per Linux kernel boot protocol, the Kernel need a size of
contiguous memory(i.e. init_size field in zeropage) from
its load address to boot, then the address would overlap
with ramdisk;
2. The hardcoded address could not be ensured as a valid address
in guest e820 table, especially with a huge ramdisk;
Also we should not hardcode the VM kernel load address to its pref_address
which work for non-relocatable kernel only. For a relocatable kernel,
it could run from any valid address where bootloader load to.
The patch will set the VM kernel and ramdisk load address by scanning
guest e820 table with find_space_from_ve820() api:
1. For SOS VM, the ramdisk has been loaded by multiboot bootloader
already so set the load address as module source address,
the relocatable kernel would be relocated to a appropriate address
out space of hypervisor and boot modules to avoid guest memory
copy corruption;
2. For pre-launched VM, the kernel would be loaded to pref_address
first, then ramdisk will be put to a appropriate address out space
of kernel according to guest memory layout and maximum ramdisk
address limit under 4GB;
Tracked-On: #5879
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The SOS VM should not use host efi memmap directly, since there are some
memory ranges which reserved by hypersior and pre-launched VM should not
be exposed to SOS VM. These memory ranges should be filtered from SOS VM
efi memmap, otherwise it would caused unexpected issues. For example, The
SOS kernel kaslr will try to find the random address for extracted kernel
image in EFI table first. So it's possible that these reserved memory is
picked for extracted kernel image. This will make SOS kernel boot fail.
The patch would create efi memmory map for SOS VM and pass the memory map
info to zeropage for loading SOS VM kernel. The boot service related region
in host efi memmap is also kept for SOS VM so that SOS VM could have full
capability of EFI services as host.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously the load GPA of LaaG boot params like zeropage/cmdline and
initgdt are all hard-coded, this would bring potential LaaG boot issues.
The patch will try to fix this issue by finding a 32KB load_params memory
block for LaaG to store these guest boot params.
For other guest with raw image, in general only vgdt need to be cared of so
the load_params will be put at 0x800 since it is a common place that most
guests won't touch for entering protected mode.
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
This patch has below changes:
1. rename mi_efi_info to uefi_info in struct acrn_boot_info;
2. remove redundant "efi_" prefix for efi_info struct members;
3. The efi_info structure in acrn_boot_info struct is defined as
same as Linux kernel so the native efi info from boot loader
is passed to SOS zeropage with memcpy() api directly. Now replace
memcpy() with detailed struct member assignment;
4. add boot_from_uefi() api;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Given the structure in multiboot.h could be used for any boot protocol,
use a more generic name "boot.h" instead;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The acrn_multiboot_info structure stores acrn specific boot info and should
not be limited to support multiboot protocol related structure only.
This patch only do below changes:
1. change name of acrn_multiboot_info to acrn_boot_info;
2. change name of mbi to abi because of the change in 1, also the
naming might bring confusion with native multiboot info;
Tracked-On: #5661
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Hypervisor does not need to care about hugepage settings in SOS kernel, user
could enable these settings in the scenario config file or GRUB menu.
Tracked-On: #5815
Signed-off-by: Victor Sun <victor.sun@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently the VM bootargs load address is hard-coded at 8KB right before
kernel load address, this should work for Linux kernel only since Linux
kernel is guaranteed to be loadered high than GPA 8K so its load address
would never be overflowed, other OS like Zephyr has no such assumption.
Tracked-On: #5689
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The init_multiboot_info() and sanitize_multiboot_ifno() APIs now
require parameters instead of implicitly relying on global boot
variables.
Tracked-On: #5661
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now ACRN supports direct boot mode, which could be SBL/ABL, or GRUB boot.
Thus the vboot wrapper layer can be removed and the direct boot functions
don't need to be wrapped in direct_boot.c:
- remove call to init_vboot(), and call e820_alloc_memory() directly at the
time when the trampoline buffer is actually needed.
- Similarly, call CPU_IRQ_ENABLE() instead of the wrapper init_vboot_irq().
- remove get_ap_trampoline_buf(), since the existing function
get_trampoline_start16_paddr() returns the exact same value.
- merge init_general_vm_boot_info() into init_vm_boot_info().
- remove vm_sw_loader pointer, and call direct_boot_sw_loader() directly.
- move get_rsdp_ptr() from vboot_wrapper.c to multiboot.c, and remove the
wrapper over two boot modes.
Tracked-On: #5197
Signed-off-by: Zide Chen <zide.chen@intel.com>
Previously we use a pre-defined structure as vACPI table for pre-launched
VM, the structure is initialized by HV code. Now change the method to use a
pre-loaded multiboot module instead. The module file will be generated by
acrn-config tool and loaded to GPA 0x7ff00000, a hardcoded RSDP table at
GPA 0x000f2400 will point to the XSDT table which at GPA 0x7ff00080;
Tracked-On: #5266
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For return value of local_gpa2hpa, either INVALID_HPA or NULL
means the EPT walking failure. Current code only take care of
NULL return and leave INVALID_HPA as correct case.
In some cases (if guest page table is filled with invalid memory
address), it could crash ACRN from guest.
Add INVALID_HPA return check as well.
Also add @pre assumptions for some gpa2hpa usages.
Tracked-On: #4730
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Initialize efi info of acrn mbi when boot from multiboot2 protocol, with
this patch hypervisor could get host efi info and pass it to Linux zeropage,
then make guest Linux possible to boot with efi environment;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. Rename BOOT_CPU_ID to BSP_CPU_ID
2. Repace hardcoded value with BSP_CPU_ID when
ID of BSP is referenced.
Tracked-On: #4420
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
--remove unnecessary includes
--remove unnecssary forward-declaration for 'struct vhm_request'
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Now, we use native gdt saved in boot context for guest and assume
it could be put to same address of guest. But it may not be true
after the pre-launched VM is introduced. The gdt for guest could
be overwritten by guest images.
This patch make 32bit protect mode boot not use saved boot context.
Insteadly, we use predefined vcpu_regs value for protect guest to
initialize the guest bsp registers and copy pre-defined gdt table
to a safe place of guest memory to avoid gdt table overwritten by
guest images.
Tracked-On: #3532
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN Coding guidelines requires two different types pointer can't
convert to each other, except void *.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Zephyr kernel is stripped ram image, its entry and load address
are explicitly defined in vm configurations, hypervisor will load
Zephyr directly based on these configurations.
Currently we only support boot Zephyr from protected mode.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously multiboot mods[0] is designed for kernel module for all
pre-launched VMs including SOS VM, and mods[0].mm_string is used
to store kernel cmdline. This design could not satisfy the requirement
of hybrid mode scenarios that each VM might use their own kernel image
also ramdisk image. To resolve this problem, we will use a tag in
mods mm_string field to specify the module type. If the tag could
be matched with os_config of VM configurations, the corresponding
module would be loaded;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Different kernel has different load method, it should be configurable
in vm configurations;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Currently the algorithm of direct_boot_sw_loader() is Linux bzImage specific,
so separate the bzImage specific loader code from it to make the api more
generic for other OS;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The guest OS of ACRN will not be limited to Linux, so refine the struct
of sw_linux to more generic sw_module_info. Currently bootargs and ramdisk
are only supported modules but we can include more modules in future;
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
now only SOS need decide boot with de-privilege or direct boot mode, while
for other pre-launched VMs, they should use direct boot mode.
this patch merge boot/guest/direct_boot_info.c &
boot/guest/deprivilege_boot_info.c into boot/guest/vboot_info.c,
and change init_direct_vboot_info() function name to init_general_vm_boot_info().
in init_vm_boot_info(), depend on get_sos_boot_mode(), SOS may choose to init
vm boot info by setting the vm_sw_loader to deprivilege specific one; for SOS
using DIRECT_BOOT_MODE and all other VMS, they will use general_sw_loader as
vm_sw_loader and go through init_general_vm_boot_info() for virtual boot vm
info filling.
this patch also move spurious handler initilization for de-privilege mode from
boot/guest/deprivilege_boot.c to boot/guest/vboot_info.c, and just set it in
deprivilege sw_loader before irq enabling.
Changes to be committed:
modified: Makefile
modified: arch/x86/guest/vm.c
modified: boot/guest/deprivilege_boot.c
deleted: boot/guest/deprivilege_boot_info.c
modified: boot/guest/direct_boot.c
renamed: boot/guest/direct_boot_info.c -> boot/guest/vboot_info.c
modified: boot/guest/vboot_wrapper.c
modified: boot/include/guest/deprivilege_boot.h
modified: boot/include/guest/direct_boot.h
modified: boot/include/guest/vboot.h
new file: boot/include/guest/vboot_info.h
modified: common/vm_load.c
modified: include/arch/x86/guest/vm.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
The definition of CONFIG_REMAIN_1G_PAGES has been removed by patch (4627cd4d HV: build: drop useless files).
So, remove the whole CONFIG_REMAIN_1G_PAGES in repo.
---
v1 -> v2:
Address Fei's comment about changing reserving_1g_pages from int32_t to int64_t
Address Jason's comment about adding MACRO NUM_REMAIN_1G_PAGES
Tracked-On: #3128
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
There are 2 reasons why SOS ve820 has to be separated from host e820:
- in hybrid mode, SOS may not own all the host memory.
- when SOS is being re-launched, it needs an untainted version of host
e820 to create SOS ve820.
This patch creates sos_e820 table for SOS and keeps host e820 intact
during SOS creation.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- for all cases of referring guest bootargs size, replace MEM_2K with
CONFIG_MAX_BOOTARGS_SIZE for better readability.
- remove duplicated MAX_BOOTARGS_SIZE definition from vm_config.h.
Also fix one minor issue in general_sw_loader() which uses copy_to_gpa()
to copy a string. Since copy_to_gpa() makes use of memncpy_s() to do the
job, the size parameter should include the string null ternimator.
Tracked-On: #2806
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch simplifies `get_primary_vcpu` and `vcpu_from_vid`.
The target_vcpu could be get from the index directly.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vcpu returned by get_primary_vcpu API is BSP vcpu of the VM. So
checking is_vcpu_bsp on vcpu is redundant.
Tracked-On: #2668
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
it removes hypervisor.h and just includes needed header files.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add e820 info in struct acrn_vm;
- rename rebuild_sos_vm_e820() to create_sos_vm_e820();
- add create_prelaunched_vm_e820() for partition mode;
- rename create_e820_table() to create_zeropage_e820() and merge for
both sharing mode and partition mode;
- move create_xxx_vm_e820() to vm.c;
- move create_zeropage_e820() to vm_load.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move 'struct e820_entry' 'E820_TYPE_XXX' from mmu.h
to e820.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
