Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Requires explicit arch path name in the include directive.
The config scripts was also updated to reflect this change.
Tracked-On: #5825
Signed-off-by: Peter Fang <peter.fang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Each .c file includes the arch specific irq header file (with full
path) by itself if required.
Tracked-On: #5825
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Below boolean function are defined in this patch:
- is_software_sram_enabled() to check if SW SRAM
feature is enabled or not.
- set global variable 'is_sw_sram_initialized'
to file static.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For FuSa's case, we remove all dynamic memory allocation use in ACRN HV. Instead,
we use static memory allocation or embedded data structure. For pagetable page,
we prefer to use an index (hva for MMU, gpa for EPT) to get a page from a special
page pool. The special page pool should be big enougn for each possible index.
This is not a big problem when we don't support 64 bits MMIO. Without 64 bits MMIO
support, we could use the index to search addrss not larger than DRAM_SIZE + 4G.
However, if ACRN plan to support 64 bits MMIO in SOS, we could not use the static
memory alocation any more. This is because there's a very huge hole between the
top DRAM address and the bottom 64 bits MMIO address. We could not reserve such
many pages for pagetable mapping as the CPU physical address bits may very large.
This patch will use dynamic page allocation for pagetable mapping. We also need
reserve a big enough page pool at first. For HV MMU, we don't use 4K granularity
page table mapping, we need reserve PML4, PDPT and PD pages according the maximum
physical address space (PPT va and pa are identical mapping); For each VM EPT,
we reserve PML4, PDPT and PD pages according to the maximum physical address space
too, (the EPT address sapce can't beyond the physical address space), and we reserve
PT pages by real use cases of DRAM, low MMIO and high MMIO.
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Tracked-On: #5788
Current implementation, SOS may allocate the memory region belonging to
hypervisor/pre-launched VM to a post-launched VM. Because it only verifies
the start address rather than the entire memory region.
This patch verifies the validity of the entire memory region before
allocating to a post-launched VM so that the specified memory can only
be allocated to a post-launched VM if the entire memory region is mapped
in SOS’s EPT.
Tracked-On: #5555
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Physical address to SW SRAM region maybe different
on different platforms, this hardcoded address may
result in address mismatch for SW SRAM operations.
This patch removes above hardcoded address and uses
the physical address parsed from native RTCT.
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'ptcm' and 'ptct' are legacy name according
to the latest TCC spec, hence rename below files
to avoid confusing:
ptcm.c -> rtcm.c
ptcm.h -> rtcm.h
ptct.h -> rtct.h
Tracked-On: #5649
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
- The current code to virtualize CR0/CR4 is not
well designed, and hard to read.
This patch reshuffle the logic to make it clear
and classify those bits into PASSTHRU,
TRAP_AND_PASSTHRU, TRAP_AND_EMULATE & reserved bits.
Tracked-On: #5586
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
While following two styles are both correct, the 2nd one is simpler.
bool is_level_triggered;
1. if (is_level_triggered == true) {...}
2. if (is_level_triggered) {...}
This patch cleans up the style in hypervisor.
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
- fix bug in 'hcall_destroy_vdev()', the availability of
vpci device shall be checked on 'target_vm".
- refine 'vpci_update_one_vbar()' to avoid potential NULL
pointer access.
Tracked-On: #5490
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Hypercall handlers for post-launched VMs automatically grab the vm_lock
in dispatch_sos_hypercall(). Remove the use of vm_lock inside the
handler.
Tracked-On: #5411
Signed-off-by: Peter Fang <peter.fang@intel.com>
More than one VM may request shutdown on the same pCPU before
shutdown_vm_from_idle() is called in the idle thread when pCPUs are
shared among VMs.
Use a per-pCPU bitmap to store all the VMIDs requesting shutdown.
v1 -> v2:
- use vm_lock to avoid a race on shutdown
Tracked-On: #5411
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
pSRAM memory should be cachable. However, it's not a RAM or a normal MMIO,
so we can't use the an exist API to do the EPT mapping and set the EPT cache
attribute to WB for it. Now we assume that SOS must assign the PSRAM area as
a whole and as a separate memory region whose base address is PSRAM_BASE_HPA.
If the hpa of the EPT mapping region is equal to PSRAM_BASE_HPA, we think this
EPT mapping is for pSRAM, we change the EPT mapping cache attribute to WB.
And fix a minor bug when SOS trap out to emulate wbinvd when pSRAM is enabled.
Tracked-On: #5330
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add cteate method for vmcs9900 vdev in hypercalls.
The destroy method of ivshmem is also suitable for other emulated vdev,
move it into hcall_destroy_vdev() for all emulated vdevs
Tracked-On: #5394
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
This function can be used by other modules instead of hypercall
handling only, hence move it to vlapic.c
Tracked-On: #5407
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Some hypercalls to a target VM are only acceptable in some certain
states, else it impacts target VM. Add some restrictive status checks to
avoid that.
Tracked-On: #5208
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Virtual interrupts injection and memory mapping operations can impact
target VM. By design, these type of operations from lower severity VM
to higher severity VM should be blocked by the hypervisor.
While the hypercalls are the interface between SOS VM and the
hypervisor, severity checks can be implemented at the beginning of
hypercalls needed.
Added severity checks in below hypercalls:
* hcall_set_vm_memory_regions()
* hcall_notify_ioreq_finish()
* hcall_set_irqline()
* hcall_inject_msi()
* hcall_write_protect_page()
Tracked-On: #5208
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For ivshmem vdev creation, the vdev vBDF, vBARs, shared memory region
name and size are set by device model. The shared memory name and size
must be same as the corresponding device configuration which is configured
by offline tool.
v3: add a comment to the vbar_base member of the acrn_vm_pci_dev_config
structure that vbar_base is power-on default value
Tracked-On: #4853
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add HC_CREATE_VDEV and HC_DESTROY_VDEV two hypercalls that are used to
create and destroy an emulated device(PCI device or legacy device) in hypervisor
v3: 1) change HC_CREATE_DEVICE and HC_DESTROY_DEVICE to HC_CREATE_VDEV
and HC_DESTROY_VDEV
2) refine code style
v4: 1) remove unnecessary parameter
2) add VM state check for HC_CREATE_VDEV and HC_DESTROY hypercalls
Tracked-On: #4853
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- use an array to fast locate the hypercall handler
to replace switch case.
-- uniform hypercall handler as below:
int32_t (*handler)(sos_vm, target_vm, param1, param2)
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Add two hypercalls to support MMIO device pass through for post-launched VM.
And when we support MMIO pass through for pre-launched VM, we could re-use
the code in mmio_dev.c
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
-- replace global hypercall lock with per-vm lock
-- add spinlock protection for vm & vcpu state change
v1-->v2:
change get_vm_lock/put_vm_lock parameter from vm_id to vm
move lock obtain before vm state check
move all lock from vmcall.c to hypercall.c
Tracked-On: #4958
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hv: hypercall: restrict the condition to assign/deassign a pci device to
a post-launched VM for safety
For the safety of post-launched VMs, pci devices assignments should
occur only when VM is being created (at VM_CREATED STATUS), and pci
devices de-assignment should occur only when VM is being created or
shutdown/reset (at VM_CREATED or VM_PAUSED status)
Tracked-On: #4995
Acked-by: Eddie Done <eddie.dong@intel.com>
Reviewed-by: Li Fei <Fei1.Li@intel.com>
Signed-off-by: Wang Qian <qian1.wang@intel.com>
For post-launched VMs, the configured CPU affinity could be different
from the actual running CPU affinity. This new field acrn_vm->cpu_affinity
recognizes this difference so that it's possible that CREATE_VM
hypercall won't overwrite the configured CPU afifnity.
Change name cpu_affinity_bitmap in acrn_vm_config to cpu_affinity.
This is read-only in run time, never overwritten by acrn-dm.
Remove vm_config->vcpu_num, which means the number of vCPUs of the
configured CPU affinity. This is not to be confused with the actual
running vCPU number: vm->hw.created_vcpus.
Changed get_vm_bsp_pcpu_id() to get_configured_bsp_pcpu_id() for less
confusion.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add a new member cpu_affinity to struct acrn_create_vm, so that acrn-dm
is able to assign CPU affinity through HC_CREATE_VM hypercall.
- if vm_create.cpu_affinity is zero, hypervisor launches the VM with the
statically configured CPU affinity.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
check the vm state in hypercall api,
add pre-condition for vm api.
Tracked-On: #4320
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Hypervisor reports VM configuration information to SOS which can be used to
dynamically allocate VCPU affinity.
Servise OS can get the vm_configs in this order:
1. call platform_info HC (set vm_configs_addr with 0) to get max_vms and
vm_config_entry_size.
2. allocate memory for acrn_vm_config array based on the number of VMs
and entry size that just got in step 1.
3. call platform_info HC again to collect VM configurations.
Tracked-On: #4616
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- since now we don't need to print error messages if copy_to/from_gpa()
fails, then in many cases we can simplify the function return handling.
In the following example, my fix could change the 'ret' value from
the original '-1' to the actual errno returned from copy_to_gpa(). But
this is valid. Ideally we may replace all '-1' with the actual errno.
- if (copy_to_gpa() < 0) {
- pr_err("error messages");
- ret = -1;
- } else {
- ret = 0;
- }
+ ret = copy_to_gpa();
- in most cases, 'ret' is declared with a default value 0 or -1, then the
redundant assignment statements can be removed.
- replace white spaces with tabs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
For SOS VM, when the target platform has multiple IO-APICs, there
should be equal number of virtual IO-APICs.
This patch adds support for emulating multiple vIOAPICs per VM.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
MADT is used to specify the GSI base for each IO-APIC and the number of
interrupt pins per IO-APIC is programmed into Max. Redir. Entry register of
that IO-APIC.
On platforms with multiple IO-APICs, there can be holes in the GSI space.
For example, on a platform with 2 IO-APICs, the following configuration has
a hole (from 24 to 31) in the GSI space.
IO-APIC 1: GSI base - 0, number of pins - 24
IO-APIC 2: GSI base - 32, number of pins - 8
This patch also adjusts the size for variables used to represent the total
number of IO-APICs on the system from uint16_t to uint8_t as the ACPI MADT
uses only 8-bits to indicate the unique IO-APIC IDs.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
1. Rename BOOT_CPU_ID to BSP_CPU_ID
2. Repace hardcoded value with BSP_CPU_ID when
ID of BSP is referenced.
Tracked-On: #4420
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Now we split passthrough PCI device from DM to HV, we could remove all the passthrough
PCI device unused code.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add assign/deassign PCI device hypercall APIs to assign a PCI device from SOS to
post-launched VM or deassign a PCI device from post-launched VM to SOS. This patch
is prepared for spliting passthrough PCI device from DM to HV.
The old assign/deassign ptdev APIs will be discarded.
Tracked-On: #4371
Signed-off-by: Li Fei1 <fei1.li@intel.com>
is_polling_ioreq is more straightforward. Rename it.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
'param' is BDF value instead of GPA when VHM driver
issues below 2 hypercalls:
- HC_ASSIGN_PTEDEV
- HC_DEASSIGN_PTDEV
This patch is to remove related code in hc_assign/deassign()
functions.
Tracked-On: #4334
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Introduce two kinds of events for each vcpu,
VCPU_EVENT_IOREQ: for vcpu waiting for IO request completion
VCPU_EVENT_VIRTUAL_INTERRUPT: for vcpu waiting for virtual interrupts events
vcpu can wait for such events, and resume to run when the
event get signalled.
This patch also change IO request waiting/notifying to this way.
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Before we assign a PT device to post-launched VM, we should reset the PCI device
first. However, ACRN hypervisor doesn't plan to support PCIe hot-plug and doesn't
support PCIe bridge Secondary Bus Reset. So the PT device must support FLR or PM
reset. This patch do this check when assigning a PT device to post-launched VM.
Tracked-On: #3465
Signed-off-by: Li Fei1 <fei1.li@intel.com>
