Some virtio ring structures and virtio feature bits are using the
same name/definition as those in kernel header files(linux/
virtio_ring.h, linux/virtio_config.h). Kernel header files must
be included to perform ioctls to support vhost. There are
compiling errors due to duplicated definitions. In this patch
the following renamings are done:
VRING_DESC_F_NEXT -> ACRN_VRING_DESC_F_NEXT
VRING_DESC_F_WRITE -> ACRN_VRING_DESC_F_WRITE
VRING_DESC_F_INDIRECT -> ACRN_VRING_DESC_F_INDIRECT
VRING_AVAIL_F_NO_INTERRUPT -> ACRN_VRING_AVAIL_F_NO_INTERRUPT
VRING_USED_F_NO_NOTIFY -> ACRN_VRING_USED_F_NO_NOTIFY
VIRTIO_F_NOTIFY_ON_EMPTY -> ACRN_VIRTIO_F_NOTIFY_ON_EMPTY
VIRTIO_RING_F_INDIRECT_DESC -> ACRN_VIRTIO_RING_F_INDIRECT_DESC
VIRTIO_RING_F_EVENT_IDX -> ACRN_VIRTIO_RING_F_EVENT_IDX
VIRTIO_F_VERSION_1 -> ACRN_VIRTIO_F_VERSION_1
vring_avail -> virtio_vring_avail
vring_used -> virtio_vring_used
vring_size -> virtio_vring_size
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch depends on a vhm patch merged, "vhm: setup ioreq shared buf
in IC_CREATE_VM ioctl". We intend to combine VM creating and ioreq
shared page setup into one step. For compatibility issue, we need follow
the patch dependency to merge accordingly.
This patch also drops vm_open/vm_close which will be intergrated into
vm_create/vm_destroy.
Tracked-On: #1330
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
ioeventfd and irqfd support for vhm was introduced in kernel vhm module.
We provide the interfaces of them for DM users.
Tracked-On: #1329
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is for "interrupt storm mitigation", used to reduce
the effect on SOS if an "interrupt storm" happens in UOS.
Add a monitor thread to get UOS pass-through devices interrupt
freqency data; currently, if "interrupt storm" happens, it'll
send a command to delay interrupt injection to UOS for some time.
The parameters: interrupt storm threshold and delay time can be
adjusted according differt HW configure and use case.
Tracked-On: #866
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Flat Mode for hub emulation means DM emulates USB devices under hub but
hide hub itself. Under this design the Guest OS cannot see any emulated
hub. So in the perspective of Guest OS, all the emulated devices are
under root hub.
This patch is used to enable feature as mentioned above. And please NOTE,
it is the initial version of hub flat Mode hub emulation, there are one
limitation: only one physical hub is supported. If second physical hub is
connected, the connect and disconnect behavior in second hub may affect
the function of first emulated hub.
The USB HUB device model should be the final long term solution, but it is
very complex. Use flat mode HUB emulation as the short term solution first
to support some USB touch devices which integrated internal HUB.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1243
This patch implements RTC feature that UOS can set RTC wakeup timer
to IOC firmware with a specific time before enter S3/S5. IOC mediator
also needs to indicate RTC wakeup reason to UOS after exit S3/S5.
Tracked-On: #1213
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The whole vmctx will be cleared during cold reset.
cmos data should not be cleared during cold reset.
Move cmos data out of vmctx.
Tracked-On: #1118
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
CMOS offset from 0x20 to 0x9F is used to store rpmb key information.
vsbl loader will init vrpmb key in CMOS when boot/reboot.
vsbl loader will not init vrpmb key during S3 resume.
vsbl will read vrpmb key via CMOS interface.
After reading, the key value is cleared in CMOS. So the key can only be
read once until next boot.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
A new ioctl is introduced in VBS-K to issue reset command to kernel
VBS-K driver. This is used to support VBS-K S3. When FE enters S3
reset command is sent to device model. Backend driver in device model
should use this ioctl to inform the VBS-K drvier in kernel.
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
RPMB frontend driver in UOS kernel has fixed unstable issue,
which requires BE for update as well. E.g. structure adjustment,
definition modification and so on.
Signed-off-by: Deng Wei <wei.a.deng@intel.com>
Signed-off-by: Huang Yang <yang.huang@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
Currently the maximum number of bus and port for xHCI are
both set to 255, it is theoretically possible but in fact
not neccessary. This patch changes those two values to be
more proper: 4 buses and 20 ports.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current design cannot get physical USB device information without
the creation of pci_xhci_dev_emu. This brings some difficulties in
certain situations, hence struct usb_native_devinfo is introduced
to describe neccessary information to solve this trouble.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
1. support "writeback" and "writethru" mode toggling for virtio-blk
conditionally. When starting DM with "writethru" parameter in
virtio-blk, guest OS could not toggle cache mode. When starting DM
with "writeback" parameter in virtio-blk, guest OS could toggle
cache mode.
------------------------------
DM cmdline | toggle support
------------+-----------------
writeback | yes
writethru | no
------------------------------
2. To toggle cache mode, run below command in guest OS:
echo "write back" > /sys/devices/xxx/vdx/cache_type
OR
echo "write through" > /sys/devices/xxx/vdx/cache_type
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Shuo Liu <shuo.a.liu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
currently, each virtio device has their own virtio_ops implementation.
Take virtio-blk for example:
static struct virtio_ops virtio_blk_ops = {
"virtio_blk",
1,
sizeof(struct virtio_blk_config),
virtio_blk_reset,
virtio_blk_notify,
virtio_blk_cfgread,
virtio_blk_cfgwrite,
NULL,
NULL,
VIRTIO_BLK_S_HOSTCAPS,
};
If start DM with two virtio-blk, this global variable will be
assigined to two virtio-blk instances. Changing hv_caps for one
instance will affect others. But different instances may need
different capabilities.
To support this requirement, we suggest to move hv_caps to
virtio_base structure, and each instance can return their own
capabilities.
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This is the counterpart in DM to the VHM request state update in the
hypervisor. Major changes include:
* Remove accesses to the obsolete 'valid' member.
* Access the 'processed' member using atomic operations.
* Sync the documentation on vhm_request.
In addition, the new state transition also requires a VHM request to be always
handled properly, as there is no 'FAILED' state any more. Instead of crashing
the device model (and thus the UOS as well), the device model should return all
1s or ignore the request when it is to load from or store to an invalid address,
respectively.
Note: there is an issue in vm_system_reset() and vm_suspend_resume() where
completed VHM requests are not properly notified, causing the hypervisor to
complain as it sees uncompleted requests while trying to create a new one. This
issue will be resolved in a separate patch.
v1 -> v2:
* Use macro-defined constants for the default values for invalid PIO/MMIO
reads.
* Change the return type of vmexit_handler_t in DM to void as the return
values are no longer necessary.
* Remove VM_EXITCODE that are no longer used.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch introduces wrappers to the built-in atomic operations provided by
gcc.
There are two sets of built-in atomic functions available. Before gcc 4.7.0 only
the __sync built-in functions are available, while since 4.7.0 a new set of
built-in functions with the __atomic prefix is introduced as a
replacement. Since the __sync functions will eventually be deprecated, the
__atomic ones are preferred whenever available.
The interfaces provided are listed below, mostly following the naming of the
underlying built-in functions which explain themselves.
atomic_load
atomic_store
atomic_xchg
atomic_cmpxchg
atomic_add_fetch
atomic_sub_fetch
atomic_and_fetch
atomic_xor_fetch
atomic_or_fetch
atomic_nand_fetch
atomic_fetch_add
atomic_fetch_sub
atomic_fetch_and
atomic_fetch_xor
atomic_fetch_or
atomic_fetch_nand
atomic_test_and_set
atomic_clear
atomic_thread_fence
atomic_signal_fence
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When guest enter/exit S3, we need to do
1. stop watchdog timer when guest enter S3 to avoid watchdog
timer reset guest when guest is in S3 state.
2. reset watchdog timer when guest exit from S3.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Then, acrnctl could send command to monitor module of DM and call
functions defined in pm ops. One example is: acrnctl resume UOS
after UOS enter S3.
Also add general pm.c and move pm related function to this file.
Signed-off-by: Yan Like <like.yan@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds new signals about parking brake and Hvac in the signal
definition and signal whitelist.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch resolves IOC mediator deinit function is blocked due to IOC mediator
core thread enters into sleep by epoll_wait, then pthread_join cannot return.
Trigger an event to wakeup core thread when IOC mediator deinit is invoked.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
fix all assign.c integer violations except related
"Implicit conversion: actual to formal param".
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current ring buffer processing logic assumes every transaction
will be submited to physical device before next transaction
coming. So it use two states 0 (free) and 1 (used) to represent
the state of every data block in the ring buffer. With the help
of the two state, the ring buffer could accept and process data
normally.
But this logic is not proper for ISOC transfer, which generally
submits many transactions even none of them arrive the physical
device. So this patch uses three values to represent the state
of data block in the ring buffer:
USB_XFER_BLK_FREE: this block could be filled with new data;
USB_XFER_BLK_HANDLING: this block is submited to physical device
but response from device is still not received;
USB_XFER_BLK_HANDLED: this block has been processed by physical
device.
The new logic will do different things for each state, which will
make the ISOC transfer work successfully.
Change-Id: I5559cae24c739633289742d64dd51751797b81a7
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch is used to add support for USB 3.0 devices. Currently
USB 3.0 disk is supported and tested successfully.
Change-Id: I3fbfbe9c28bc4b14af0417104f8fa822f9758908
Tracked-On:
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
While fixing the MISRA C violations related to integral types, we have unified
the type of the following data:
uint8_t:
phys_pin, virt_pin, vpic_pin, ioapic_pin, vioapic_pin
uint16_t:
vm_id, pcpu_id, vcpu_id, vpid
uint32_t:
vector, irq
This patch revisits the types of the fields in vhm_request as well as the
structures used as parameters in the hypercalls, and make them aligned with the
types the hypervisor uses for such data. Reserved fields are added to keep the
size and layout of the structures. Implicit paddings are also made explicit as
reserved fields.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
fix integer type violations,keep some violations which
related to hypcall and msix_entry_index.
V1->V2:1.modified API_MAJOR_VERSION from Makefile
2.sync acrn_common.h changed to device model
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This function add high level reset_vdev function. Which is
implemented to call deinit/init pairing to emulate the virtual
device reset operation.
This patch also add the system reset which keep the UOS RAM
content functionality to DM.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Guest has erquirement to support system/full reboot and S3. Which could
trigger different reset path in guest
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
GUEST_CFG_OFFSET is used to pass the memory top info from DM
to HV. The address should be in E820 reserved range to prevent
guest use it for other purpose.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
There has one new DRD driver followed usb role framework which is just
upstreamed to Linux community. This patch updates the xHCI DM to be
compatible with it. DM DRD code follows DRD spec to implement and make
it more reasonable.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
For dedicated xHCI extended capability, it need set corresponding PCI VID/PID.
This patch sets the Intel Apollo Lake platform PCI VID/PID for DRD
capability which will be checked for enabling DRD fucntion in new DRD
driver. Besides, this patch refines the PCI VID/PID related code.
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
According to C99 standard, -1 integer constant with 'U/UL'
suffix has no type.
To explicit the integer constant:
Update -1U or -1UL as ~0U or ~0UL, or invalid number according
to usage case.
V1-->V2:
Update parameter name and type of send_startup_ipi since
the second parameter is used as pcpu_id;
Update related comments for code clearity.
V2-->V3:
Update comments of struct acrn_irqline;
rename cpu_startup_dest as dest_pcpu_id in the second
parameter of send_startup_ipi.
Tracked-on: ccm0001001-247033
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The current register names in instr_emul are misleading since the register names
are not VM-specific. Rename VM_REG(_GUEST) to CPU_REG in both the hypervisor and
device model.
v1 -> v2:
* Introduced.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Misra C required signed/unsigned conversion with cast.
V1->V2:
a.split patch to patch series
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- UOS will boot fail if 'strictio' is enabled ('-e' option), in this
case (with '-e'), device model will block all PIO accesses whose
handlers were not registered, after that, device model program will
exit, hence UOS boot fail.
actually, such kind of accesses exist, e.g. UOS would program
PIT registers (port address: 0x43) if hpet is disabled.
- For debug, we can trap unexpected PIO access in 'default_inout()'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Current option of removing vGSI capability is global, which exposes
vIOAPIC link for all ptdev even only one need this. This patch makes
it as ptdev local option to lower the system level impact. To keep
vGSI for MSI capable ptdev, just explicitly append ",keep_gsi" in
option list, like "-s 14,passthru,0/e/0,keep_gsi"
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- hardcode the devices' GSI info based on the platform
- reject the passthrough if the following requirement is not met
all the PCI devices that are sharing the same GSI should be assigned
to same VM to avoid physical GSI sharing between multiple VMs.
v4 -> v5
* Move the gsi_dev_mapping_tables definition in a separate file
* Add the GSI info that might be used by GPIO
* Update the HW name
v3 - > v4
* Refine the format of raw data to improve the readability
* Remove the redundant code when adding the new dev into the gsi
sharing group
v2 -> v3
* Add the MSI/MSI-x capability check
Do not add the device which supports MSI/MSI-x to the GSI sharing
group.
v1 -> v2
* Update the GSI raw data based on SBL
* Free the resources when gsi sharing violation occurs
* Move the MACRO PCI_BDF(b, d, f) to pci_core.h since passthrough.c
and gsi_sharing.c are both using it
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the vcpu id type as uint16_t for vm_create_vcpu, this
keeps alignment with the updates for the structure acrn_create_vcpu
used by hcall_create_vcpu in the hypervisor.
In the device model, the caller is responsible for vcpu id type
conversion; vcpu id type is uint16_t for external interface in the
current implement.
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When enabling GPU passthru for guest, stolen memory needs to be
disabled. This change disables stolen memory in passthru mode.
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Gong Zhipeng <zhipeng.gong@intel.com>
In the hypervisor, physical cpu id is defined as "int" or "uint32_t"
type in the hypervisor. So there are some sign conversion issues
about physical cpu id (pcpu_id) reported by static analysis tool.
Sign conversion violates the rules of MISRA C:2012.
In this patch, define physical cpu id as "uint16_t" type for all
modules in the hypervisor and change related codes. The valid
range of pcpu_id is 0~65534, INVALID_PCPU_ID is defined to the
invalid pcpu_id for error detection, BROADCAST_PCPU_ID is
broadcast pcpu_id used to notify all valid pcpu.
The type of pcpu_id in the struct vcpu and vcpu_id is "int" type,
this will be fixed in another patch.
V1-->V2:
* Change the type of pcpu_id from uint32_t to uint16_t;
* Define INVALID_PCPU_ID for error detection;
* Define BROADCAST_PCPU_ID to notify all valid pcpu.
V2-->V3:
* Update comments for INVALID_PCPU_ID and BROADCAST_PCPU_ID;
* Update addtional pcpu_id;
* Convert hexadecimals to unsigned to meet the type of pcpu_id;
* Clean up for MIN_PCPU_ID and MAX_PCPU_ID, they will be
defined by configuration.
Note: fix bug in the init_lapic(), the pcpu_id shall be less than 8,
this is constraint by implement in the init_lapic().
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements VM monitor operations including stop/suspend/resume.
For other VM monitor operations(pause/unpause/query), IOC mediator would not
register callbacks for them since there is no requirements from VM Manager.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
The Intel Trace Hub (aka. North Peak, NPK) is a trace aggregator for
Software, Firmware, and Hardware. On the virtualization platform, it
can be used to output the traces from SOS/UOS/Hypervisor/FW together
with unified timestamps.
There are 2 software visible MMIO space in the npk pci device. One is
the CSR which maps the configuration registers, and the other is the
STMR which is organized as many Masters, and used to send the traces.
Each Master has a fixed number of Channels, which is 128 on GP. Each
channel occupies 64B, so the offset of each Master is 8K (64B*128).
Here is the detailed layout of STMR:
M=NPK_SW_MSTR_STP (1024 on GP)
+-------------------+
| m[M],c[C-1] |
Base(M,C-1) +-------------------+
| ... |
+-------------------+
| m[M],c[0] |
Base(M,0) +-------------------+
| ... |
+-------------------+
| m[i+1],c[1] |
Base(i+1,1) +-------------------+
| m[i+1],c[0] |
Base(i+1,0) +-------------------+
| ... |
+-------------------+
| m[i],c[1] |
Base(i,1)=SW_BAR+0x40 +-------------------+
| m[i],c[0] | 64B
Base(i,0)=SW_BAR +-------------------+
i=NPK_SW_MSTR_STRT (256 on GP)
CSR and STMR are treated differently in npk virtualization because:
1. CSR configuration should come from just one OS, instead of each OS.
In our case, it should come from SOS.
2. For performance and timing concern, the traces from each OS should
be written to STMR directly.
Based on these, the npk virtualization is implemented in this way:
1. The physical CSR is owned by SOS, and dm/npk emulates a software
one for the UOS, to keep the npk driver on UOS unchanged. Some CSR
initial values are configured to make the UOS npk driver think it
is working on a real npk. The CSR configuration from UOS is ignored
by dm, and it will not bring any side-effect. Because traces are the
only things needed from UOS, the location to send traces to and the
trace format are not affected by the CSR configuration.
2. Part of the physical STMR will be reserved for the SOS, and the
others will be passed through to the UOS, so that the UOS can write
the traces to the MMIO space directly.
A parameter is needed to indicate the offset and size of the Masters
to pass through to the UOS. For example, "-s 0:2,npk,512/256", there
are 256 Masters from #768 (256+512, #256 is the starting Master for
software tracing) passed through to the UOS.
CSR STMR
SOS: +--------------+ +----------------------------------+
| physical CSR | | Reserved for SOS | |
+--------------+ +----------------------------------+
UOS: +--------------+ +---------------+
| sw CSR by dm | | mapped to UOS |
+--------------+ +---------------+
Here is an overall flow about how it works.
1. System boots up, and the npk driver on SOS is loaded.
2. The dm is launched with parameters to enable npk virtualization.
3. The dm/npk sets up a bar for CSR, and some values are initialized
based on the parameters, for example, the total number of Masters for
the UOS.
4. The dm/npk sets up a bar for STMR, and maps part of the physical
STMR to it with an offset, according to the parameters.
5. The UOS boots up, and the native npk driver on the UOS is loaded.
6. Enable the traces from UOS, and the traces are written directly to
STMR, but not output by npk for now.
7. Enable the npk output on SOS, and now the traces are output by npk
to the selected target.
8. If the memory is the selected target, the traces can be retrieved
from memory on SOS, after stopping the traces.
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Zhang Di <di.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fixes a recent PR #311 that added a new API but the doxygen comments for
one of the parameters didn't match the parameter name.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
