This reverts partial of commit: 9bf5aafe "script: workarounds for UOS of
4.19-rc kernel", since our fixing patch for kernel crash when audio passthru
is ready.
Tracked-On:#1461
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
This patch resolves acrn-dm crash issue when acrnd boots up the acrn-dm.
The rootcause is mevent_enable and mevent_disable have NULL pointer as
its parameter if uart backend is not tty capable, so add check code for
the uart backend before invoking mevent_enable and mevent_disable.
The issue can be reproduced when acrnd boots up the acrn-dm.
Tracked-On: #1466
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For acrn-dm cmd options, there are some mismatch usage from acrn-dm help
message.
This patch will cleanup them.
Tracked-On: #1469
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Reviewed-by: Jason Chen <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
VirtIO v1.0 spec 04 5.2.5:
- Protocol unit size is always 512 bytes.
- blk_size (logical block size) and physical_block_exp (physical block
size) do not affect the units in the protocol, only performance.
VirtIO v1.0 spec 04 5.2.6.1:
- A driver MUST NOT submit a request which would cause a read or write
beyond capacity.
Reject the requests that violate these terms.
v1 -> v2:
- add more comments for clarity
Tracked-On: #1422
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There is no GEOM framework in Linux. Remove dead code.
v1 -> v2:
- complete removal of the entire GEOM logic
Tracked-On: #1422
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
NHLT table contains the settings some audio drivers need.
An ACPI method is used to get NHLT table address & length.
In current DM code, the NHLT talbe length in the ACPI method
is hardcoded, which will cause troubles when the length of the
table changed.
This patch replaces the hardcoded NHLT table length according to
the table length read from SOS.
Tracked-On: #1461
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
For UOS, we need to call hypercall to set BSP init state now.
So we can't combint the vm start and vm reset (vm reset will
reset the vcpu context). Remove vm start from reset_vm. DM
needs to start vm after every vm reset.
Update DM to set UOS BSP init state after vm reset and before
vm start.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to use new interface to set the state of guest BSP (entries, general
registers etc) when DM load bzimage.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
to use new interface to set the state of guest BSP (entries, general
registers etc) when DM load vsbl.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add ioctl parameter and API to set vcpu regs. The guest software
loader will call this API to set guest vcpu registers.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The write_dsdt_xhci function is use for describe the xdci dsdt table.
Correct its name.
Tracked-On: #1444
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
movb is used for registers STATUS and CFGGENERATION whose size is 1
byte. Previously hv cannot report the correct MMIO trap size for
movb and virtio hard coded their size to 4 as a workaround. hv fixed
movb instruction emulation and MMIO size can be reported correctly.
This patch removes those workaround.
commit 9df8790ffc ("hv: Fix two minor issues in instruction emulation code")
Tracked-On: #1449
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Add a function to do msix table deinit.
1. call api to reset msix entry in hypervisor
2. free virtual msix table memory
3. unmap pba page if any
4. unmap the pages passhtru to uos in MSIX BAR if any
Tracked-On: #1222
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Normally, for devices support MSI-X, PBA is passed-through to guest.
However, PBA and MSI-X table share the same bar, and part of PBA and
MSI-X table may share a same page for some devices.
If that is the case, the part of PBA within the page should be emulated
rather than passed-through.
This patch adds PBA emulation support for MSI-X.
Tracked-On: #1222
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
This reverts partial of commit: 9bf5aafe "script: workarounds for UOS of
4.19-rc kernel", since our fixing patch for the PVMMIO ppgtt update bug
is ready.
For the remaining audio pass-through workaround, we still need to keep
it until it's fixed.
Tracked-On: #1413
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Added edge triggered read and write events.
For mei mediator we need to detect changes in
sysfs files, it's not possible to do it via
level based triggers as the files are always
readable.
Tracked-On: #1417
Change-Id: Ib360ad31f30afa576b2b7b833f9bb139c269a030
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Current mevent mevent_del/add() implementations are incomplete and buggy.
It's easier to implement mevent_enable/disable() required for mei
virtualization. Other user of these functions, which were previously
empty stubs is the uart mediator, so far it looks working well.
Add few style issues fix on the way.
Tracked-On: #1416
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The vmname variable is missing 'export',
so it's probably only shadowing the already
exported variable from devicemodel/include/dm.h
Tracked-On: #1415
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
An inline function defined in headers must be static
otherwise compilation may fail, depending on gcc optimization level,
particularly if dropping -O2 from the Makefile dm doesn't
compile reporting unresolved symbols.
Tracked-On: #1406
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
@set_wakeup_timer(), "ack" is not initialized before
passing it to "mngr_send_msg() as input.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
atkbdc_init will call pci_irq_reserve to reserve irq 1 & 12, which need
pci_irq_init be called first.
Tracked-On: #1402
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
This is an issue result from incomplete process logic of commit:
"ba68bd4 DM USB: xHCI: fix enumeration error after rebooting".
This patch is used to fix it.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1425
The patch resolves a bug that signal SteeringWheelSpeechCtrlBtn can not be
received in UOS. the rootcause is signal SteeringWheelSpeechCtrlBtn and
signal SteeringWheelPauseBtn are combined into one multi-signal message and
signal SteeringWheelPauseBtn is not defined.
To fix this, add SteeringWheelPauseBtn definition.
Tracked-On: #1410
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Currently there're two issues which prevent UOS with 4.19-rc kernel from
booting:
1. GVT-g PVMMIO ppgtt update optimization causes GPU hang
2. audio driver causes kernel panic
This patch is a temporary workaround to prelimarily support 4.19-rc UOS.
And it will be reverted after above two issues are fixed.
Tracked-On: #1413
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
vPIT is used as a source of system timer by UEFI (e.g. OVMF).
This is ported from Bhyve, with a few changes:
- move to user space, using POSIX timer
- support timer mode 3
- improve the emulation of OUT and STATUS byte
- improve the emulation of counter behavior
- improve the emulation of CE update in periodic mode
- treat CR == 0 as 0x10000
Origin: FreeBSD
License: BSD-3-Clause
URL: https://svnweb.freebsd.org/
commit: 283291
Purpose: Adding vPIT support.
Maintained-by: External
Tracked-On: #1392
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
According to PCI spec 3.0 section 6.2.2 "Device Control", guest
could write the command register to control device response to
io/mem access.
The origial code register/unregister the memory range which is
not suitable because it can't handle the sequence:
1. disble the device response to specific memory range
2. reboot guest (DM will try to free the memory range which
was freed in step 1 already)
Tracked-On: #1277
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some firmware (e.g. UEFI) uses RTC CMOS to fetch the system's memory
configuration. Put lowmem / highmem info in the designated area.
This is a port of Bhyve vRTC's user-space logic.
v1 -> v2:
* move KB/MB/GB to macros.h
* move nvram offset definitions to rtc.h
Tracked-On: #1390
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
When the physical USB device is disconnected before DM's emulation
is ready, the virtual connection state is not cleared properly. This
will cause the DM refuse to do emulation for future physical connection.
This patch clears those states mentioned above and hence fix the issue.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1367
on MRB, if memory >= 8GB, will allocate 6GB to UOS;
for MRB now just runs one UOS with more workload.
Tracked-On: #1369
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Now the plane_restriction is not ready on 4.19-rcX kernel. So it will be
disabled temporally.
This change is only used to disable the plane_restriction for UOS when UOS
based on 4.14 kernel is launched in 4.19 sos kernel.
V1->V2: Commit log adds the description that this change is used to disable
the plane_restriction in 4.14 UOS kernel.
Tracked-on: https://github.com/projectacrn/acrn-hypervisor/issues/1373
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Now the IPU mediator driver is not ready on 4.19-rcX kernel. So the IPU will
fallback to pass-trhough mode temporally and be assigned to guest directly.
After the IPU mediator driver is ready, the ipu_passthrough flag will be
changed to zero.
V1-V2: Describe the issue clearly in commit log.
Tracked-on: https://github.com/projectacrn/acrn-hypervisor/issues/1373
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Wu, Binbin <binbin.wu@intel.com>
When USB hub is disconnected, its connection status is not cleared
in the DM, this defect will cause the related assigned port could
not be used any more.
This patch is used fix this issue.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1365
Previous implementation binds libusb (in other words: usbfs) with
native device when DM receives the Enable Slot command. But according
to xHCI spec 4.6.5, the binding relationship is decided when the
Address Device command is received, so this implementation is not
consistent with hardware behaviors.
And this incompatible could induce following issue. When two or more
USB devices are connected at the same time, eg, connecting two devices
before Guest OS is booted, the virtual slot id may bind to wrong root
hub port.
This patch will do the binding when Address Device command is received
and related issues will be fixed.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1366
According to xHCI spec, the Stop Endpoint command should execute
no matter the endpoint is in halted state or not, but current
implementation just refuse do the command and return error to
Guest OS. It is wrong and this patch is used to fix it.
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Tracked-On: #1366
One additional command parameter is added for virtio-net to support
vhost net. The command line for vhost net is as follows:
-s n,virtio-net,tap_xxx,vhost
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost proxy interacts with vhost kernel thru vhost char dev. Internal
interfaces are implemented based on ioctls of vhost char dev in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
There are 2 eventfds for one virtqueue, one is for kick and the other
is for notify. eventfd used for kick is associated with a PIO/MMIO
region. eventfd used for notify is associated with a MSIx/INTx. The
eventfd pair is registered to VHM thru VHM char dev.
VHM irqfd currently only support MSIx. If INTx is used, vhost proxy
uses mevent to poll the call fd from vhost then inject interrupt to
guest.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost kernel driver needs the information of memory mapping between
GPA and the virtual addresses in device model process. This is
required for virtqueue related operations. This patch gets memory
mapping information from vmctx then conveys to vhost.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
vhost_vq related interfaces are implemented in this patch. They are
vhost_vq_init/vhost_vq_deinit/vhost_vq_start/vhost_vq_stop.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This patch adds the vhost support to the device model virtio. A vhost
proxy is implemented based on the virtio framework and vhost char dev.
Key data structures and external interfaces are implemented in this
patch.
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Some virtio ring structures and virtio feature bits are using the
same name/definition as those in kernel header files(linux/
virtio_ring.h, linux/virtio_config.h). Kernel header files must
be included to perform ioctls to support vhost. There are
compiling errors due to duplicated definitions. In this patch
the following renamings are done:
VRING_DESC_F_NEXT -> ACRN_VRING_DESC_F_NEXT
VRING_DESC_F_WRITE -> ACRN_VRING_DESC_F_WRITE
VRING_DESC_F_INDIRECT -> ACRN_VRING_DESC_F_INDIRECT
VRING_AVAIL_F_NO_INTERRUPT -> ACRN_VRING_AVAIL_F_NO_INTERRUPT
VRING_USED_F_NO_NOTIFY -> ACRN_VRING_USED_F_NO_NOTIFY
VIRTIO_F_NOTIFY_ON_EMPTY -> ACRN_VIRTIO_F_NOTIFY_ON_EMPTY
VIRTIO_RING_F_INDIRECT_DESC -> ACRN_VIRTIO_RING_F_INDIRECT_DESC
VIRTIO_RING_F_EVENT_IDX -> ACRN_VIRTIO_RING_F_EVENT_IDX
VIRTIO_F_VERSION_1 -> ACRN_VIRTIO_F_VERSION_1
vring_avail -> virtio_vring_avail
vring_used -> virtio_vring_used
vring_size -> virtio_vring_size
Tracked-On: #1329
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
