After panic, kernel will do warm boot to reserve memory for log collecting.
Need to cold reboot system as the original behaviour.
Tracked-On:#1024
Signed-off-by: Liu, Xinwu <xinwu.liu@intel.com>
Acked-by: Chen, Gang <gang.c.chen@intel.com>
There's a DP port on UP2 board, so we cannot add video=DP-x:d paramter,
otherwise, DP monitors will not be able to be detected on UP2 boards.
Tracked-On: #2268
Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
The couple of lines highlighted in the launch_uos.sh script are off
since the latest modifications made to that script. Fix them both
to highlight the correct script lines that require attention.
Tracked-On: #2270
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Document a community reference release for the Skylake NUC with GPU
passthrough as a one-time snapshot release, not supported or
maintained. Includes a tar patch file.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
V1->V2:
rename is_exception_inject to has_exception.
V2->V3:
remove the else statement and add new if statement to check
has_exception.
Misra C requires not allowed to use goto.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Silicon Debug Feature: CPUID.01H.ECX[11]
- We can't allow guests to have direct access to silicon wide resources.
Machine Check Exception: CPUID.01H.EDX[5]
- Need HV support before exposing it to the guests.
Perfmon and Debug: CPUID.01H.ECX[15]
Debug Store: CPUID.01H.EDX[21], CPUID.01H.ECX[2], CPUID.01H.ECX[4]
- HV emulation is needed to separate host and guest monitoring data.
- guest CPUID.0AH is forced to all-zero in ACRN so it makes sense to clear
these bits as well.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently whether audio works in virtio mediator or pass-through mode can be determined
by checking the device file of vbs_k_audio
But before the completion of loading audio virtio-BE module, the device file of /dev/vbs_k_audio
doesn't exist. In such case in course of loading UOS, the incorrect work mode is selected
for audio device (passthru instead of mediator). This is incorrect
Tracked-On: projectacrn/acrn-hypervisor#2247
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Alek Du <alek.du@intel.com>
Typedefs that indicate size and signedness should be used in place of
the basic numerical types
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Misra C requires Function must have only 1 return entry.
Fixed it by use "if ... else ..." format.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
* move `pci_pdev_calc_address` out of the spinlock in
`pci_pdev_read_cfg`
* remove the spaces before tabs
* make the line not over 120 characters
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
UP2 don't have ioc, there is no need to simulate it.
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
const dmar table is used for sbl board, and it can be
a single/independable file.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. add static for local functions and variables.
2. move vm_sw_loader from vcpu to vm
3. refine uefi.c to follow the code rules.
4. separate uefi.c for vm0 boot and bsp two parts. bsp layer just
access native HW related, can't access vm/vcpu, vm0 boot part can
access vm / vcpu data structure.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Fix misspellings missed during regular reviews, and remove trailing
white space and Windows \r at end of lines.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
different serial devices could be used on different boards.
"vuart=ttySn@irqN" is used to avoid vuart's irq conflict
with SOS passthrough devices.
on UEFI platform, if ttyS1 used for debug uart, and its IRQ
on native OS is 5, you'd better set "vuart=ttyS1@irq5"; also
for its SOS bootargs in acrn.conf, you need set "console=ttyS1"
to match its vuart setting.
Tracked-On: #2170
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
-- Change boot_cpu_data to static, only used in cpu_caps.c,
-- Add get_cpu_info() api, it will call this api instead of
boot_cpu_data except cpu_caps.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- move structure 'cpu_state_info' from cpu_caps.h to host_pm.h
-- add get_cpu_pm_state_info() api
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
- rename biosacpi_search_rsdp() to found_rsdp();
- to make sure procedure has one exit point;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
move MACRO of R_X86_64_RELATIVE into #ifdef CONFIG_RELOC block;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- to make sure procedure has one exit point;
- add NULL pointer check;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remove goto;
- make sure procedure has one exit point;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- remark unused MACRO;
- remove goto;
- make sure procedure has one exit point;
Tracked-On: #861
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SMX should be disabled on guests.
Actually current code assumes SMX is disabled (no VM exit handler for GETSEC
and bit 2 of IA32_FEATURE_CONTROL is set), and this patch simply explicitly
clear guest CPUID.01H.ECX[6].
Since both CPUID.01H.ECX[5] and CPUID.01H.ECX[6] are cleared from guest CPUID,
MSR IA32_SMM_MONITOR_CTL is not available in guests.
Need to make sure CR4.SMXE is cleared in guests.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SMRR (System-Management Range Register) is disabled from vMTRR,
so treat IA32_SMRR_PHYSBASE and IA32_SMRR_PHYSMASK as unsupported.
IA32_SMBASE is available only when IA32_VMX_MISC[15] is set.
IA32_FIXED_CTR0/1/2 are available only when CPUID.0AH:EDX[4:0] is non-zero.
Intel Processor Trace feature has been disabled and the associated MSRs
need to be in unsupported_msr[] as well.
Tracked-On: #1867
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
hypervisor/arch/x86/virq.c missed a new line at:
if (bitmap_test_and_clear_lock(...)) { vioapic_update_tmr(vcpu);
Tracked-On: #861
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Array index of "vbdp_devs" may be out of bounds if
"i >= XHCI_MAX_VIRT_PORTS", so index checking is necessary.
Tracked-On: #1252
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
remove few calls to return statement in routines.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To meet MISRA, remove multiple return in the func.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
SBL doesn't support 40-pin header for now, so the serial PCI
device(0:18:1) on it doesn't work. Let's just workaround this by
changing hv's default serial output device to 0:18:0. In the future,
we'd rather change it back if SBL supports it.
This change is only for SBL, for UEFI, now we offer serial configuration
through command line parameter(vuart=...).
Tracked-On: #1995
Signed-off-by: Tw <wei.tan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
-remove goto
-remove multiple return
-Modify assignment operator in boolean expression
-Modify/fix code style violations
-fix attempt to change parameters passed by value
-fix value need U suffix
-fix use of mixed arithmetic
-fix assigment in expression
-other fixes
Tracked-On: #861
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Reviewed-by: Bing Zhu <bing.zhu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-remove goto
-remove multiple return
-Modify assignment operator in boolean expression
-Modify/fix code style violations
-fix attempt to change parameters passed by value
-fix value need U suffix
-fix use of mixed arithmetic
-fix assigment in expression
-other fixes
Tracked-On: #861
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Reviewed-by: Bing Zhu <bing.zhu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-remove goto
-remove multiple return
-Modify assignment operator in boolean expression
-Modify/fix code style violations
-fix attempt to change parameters passed by value
-fix value need U suffix
-fix use of mixed arithmetic
-fix assigment in expression
-other fix
Tracked-On: #861
Signed-off-by: Chen Gang G <gang.g.chen@intel.com>
Reviewed-by: Bing Zhu <bing.zhu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRA compaint that the vlapic_icrlo_write_handler 's cyclomatic
complexity is greater than 20. Try to remove multiple returns/exits.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
To meet MISRA, remove few return in routines of vlapic.
Tracked-On: #861
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
