move _page_table_level to common, and rename functions and
variables to comform with pgtln style
when we refer to pgtl0e, it means the lowest translation
table entry, while the "pte" refers generic page table entry.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add x86 mm_common.h to map common macro name to x86 name
and chang them in common/mmu.c, replace XX_PFN_MASK with
PFN_MASK, since they are the same.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The sanitized page is used to mitigate l1tf for x86, but sanitized_page_hpa
is the hpa used to set in the page table entry when delete or modify
page happens, it is by default is 0, other arch donot need to init it.
move this part to common for other arch to reuse it.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move struct pgtable and page_pool to common code and
move alloc_page/free_page/init_page_pool to common
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move some funcitons like hpa2hva to common file.
change some files to include file from asm/pgtable.h to common/pgtable.h
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For now, BOARD should use the qemu-riscv for risc-v.
For RISC-V:
make hypervisor BOARD=qemu-riscv SCENARIO=shared ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu-
For x86:
make hypervisor BOARD=qemu SCENARIO=shared [ARCH=x86]
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Only x86 has local APIC pass-thru. For release mode, the console_vmexit_callback
is empty, complier should optimize this unuseful check.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Now doesn't want introduce the PCI module since PCI CFG access should be arch
special.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
get_vm_from_vmid,is_paused_vm and is_poweroff_vm should be common APIs.
But now doesn't implement them as common for not introduce more VM related
data structure and APIs.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
send_single_ipi/send_dest_ipi_mask are calling sbi_send_ipi. According
to SBI spec:
- uint64_t hart_mask is a scalar bit-vector containing hartids
- uint64_t hart_mask_base is the starting hartid from which the
bit-vector must be computed
Logical pCPU ID and pCPU ID mask need to be converted to physical hart
ID mask and physical hart ID base.
Tracked-On: #8811
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
MMIO read/write without memory order should be common ARCH, without
PIO support shouldn't use PIO APIs, so implement them as empty.
Tracked-On: #8807
Signed-off-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
init sched and call run_idle_thred in init_pcpu_comm_post to switch to idle
thread after AP initialization finish.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
implement arch_cpu_dead and arch_cpu_do_idle for riscv, arch_cpu_dead and
arch_cpu_do_idle will be called by common module.
Tracked-On: #8812
Signed-off-by: Haicheng Li <haicheng.li@outlook.com>
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
cpu_dead calls arch_cpu_dead, cpu_do_idle calls arch_cpu_do_idle,
arch_cpu_dead and arch_cpu_do_idle are required to be implemented by
each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
stack_frame is not only for vcpu thread, host thread needs
it, so move stack_frame out of vcpu file.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
delivery mode and idle mode are x86 specific percpu, so move it from common to
x86 arch, also change the name of mode_to_idle to be idle_mode, change the name
of mode_to_kick_pcpu to be kick_pcpu_mode.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add arch_send_reschedule_request, which is called by make_reschedule_request, for X86
arch_send_reschedule_request will call kick_pcpu, arch_send_reschedule_request is arch
public API, which is needed to be implemented by each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch calls timer_init() to initialize timer for
pcpu on risc-v platform.
Tracked-On: #8816
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Convert IRQ-related macros to static inline functions and introduce
wrappers for arch-specific implementations. This follows the style we
defined for multi-arch development.
This is a follow-up update for commit
a7239d126 ("[FIXME] hv: risc-v add denpended implementation in cpu.h").
CPU_IRQ_ENABLE_ON_CONFIG -> local_irq_enable
CPU_IRQ_DISABLE_ON_CONFIG -> local_irq_disable
CPU_INT_ALL_DISABLE -> local_irq_save
CPU_INT_ALL_RESTORE -> local_irq_restore
Tracked-On: #8813
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
This patch implements interrupt initialization and the basic
exception/interrupt handling flow on RISC-V.
init_interrupt() needs to be invoked during CPU initialization to
set up the trap vector and enable the interrupt.
RISC-V exception and interrupt handling includes:
- Saving and restoring CPU registers around traps
- Implementing handlers for:
- Supervisor software interrupt
- Supervisor timer interrupt
- Halting the CPU for all other interrupts and exceptions
------
TODOs:
1. add support for registering interrupt handlers via request_irq() and
further adoption of the common IRQ framework.
2. add support for external interrupt.
Tracked-On: #8813
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Co-developed-by: Shiqing Gao <shiqing.gao@intel.com>
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Enable acrnlog (memory logging) in release builds, default log level
is still controlled by DEBUG_OPTIONS/MEM_LOGLEVEL in scenario file.
Tracked-On: #8805
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Without -fpie or -fno-pie specified in the CFLAGS and ASFLAGS, different
versions of riscv64-linux-gnu-gcc have different behavior, for example,
Ubuntu 13.3.0-6ubuntu2~24.04 will compile as if -fpie, but 15.1.0 will
compile as if -fno-pie. To make the build consistent specify -fpie when
CONFIG_RELOC=y and -fno-pie otherwize explicitly.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch adds the basic logics to bring up all APs in the C
entry of BSP boot. The mapping between logcial CPU IDs and physical
hart IDs is setup based on the pre-generated data from config tool
by parsing the device tree. Logical CPU ID BSP_CPU_ID will always
map to the BSP hart ID. The per pCPU logic ID is saved in tp register.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extension Zihintpause (Pause hint) is mandatory for RVA23. asm_pause
is implemented based on "pause" instruction.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use tp register to hold the current logical CPU ID. This follows the
same design as x86 which uses MSR_IA32_SYSENTER_CS for the same purpose.
riscv uses SBI HSM to start the APs.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This is just for temporary build and should be reverted when
common debug module is integrated.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The following pcpu related interfaces are moved into common:
- common/cpu.c::start_pcpus
- include/common/cpu.h::get_pcpu_id
- include/common/cpu.h::set_current_pcpu_id
Their arch specific implementations are moved into arch/$(ARCH):
- arch/$(ARCH)/cpu.c::arch_start_pcpu
- include/arch/$(ARCH)/asm/cpu.h::arch_get_pcpu_id
- include/arch/$(ARCH)/asm/cpu.h::arch_set_current_pcpu_id
The following interface is moved into common:
- pcpu_set_current_state (from arch/x86/cpu.c -> common/cpu.c)
The following MACROs are moved into include/common/cpu.h:
- CPU_UP_TIMEOUT
- CPU_DOWN_TIMEOUT
- BSP_CPU_ID
- INVALID_CPU_ID
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extract common interface to include/lib/bits.h, and invoke the variant
implementation of arch.
Re-implement unlocked functions as C in common library.
Rename bitmap*lock() to bitmap*(), bitmap*nolock() to bitmap*non_atomic().
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extract common interface to include/lib/spinlock.h, and invoke the
variant implementation of arch.
Refine assemble macro code in case that ASSEMBLER defined.
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Move phys_cpu_num and pcpu_active_bitmap to common, which could be
only accessed by interfaces provided by smp.h.
v2->v3:
1. move ALL_CPUS_MASK/AP_MASK to common cpu.h
v1->v2:
1. preserve phys_cpu_num in x86 but implement arch_get_num_available_cpus()
to provide interface for common code to access.
2. change function name test_xx to check_xx
Tracked-On: #8801
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Move x86 architecture dependent per cpu data into a
seperate structure and embeded it in per_cpu_region.
caller could access architecture dependent member by
using prefix 'arch.'.
v2->v3:
move whose_iwkey, profiling_info and tsc_suspend to x86
v1->v2:
rebased on latest repo
Tracked-On: #8801
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Reviewed-by: Chen, Jian Jun<jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Since there is no common IPI abstraction, the arch_ prefix is redundant.
This patch renames the functions as follows:
- arch_send_dest_ipi_mask -> send_dest_ipi_mask
- arch_send_single_ipi -> send_single_ipi
Tracked-On: #8799
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
This patch implements risc-v specific timer codes. Basically,
risc-v adapts to acrn timer framework with some specific
behaviors. So far, it enables sstc support in h-mode.
Tracked-On: #8792
Signed-off-by: Haicheng Li <haicheng.li@outlook.com>
Co-developed-by: Yong Li <yong.li@intel.com>
Signed-off-by: Yong Li <yong.li@intel.com>
Co-developed-by: Yi Y Sun <yi.y.sun@intel.com>
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For arch specific codes, we use arch_xxx() to name the function.
So, rename cpu_ticks/cpu_tickrate/set_hw_timeout/init_hw_timer
to follow this convention. Then, use arch interface to set timeout
value in update_physical_timer().
Furthermore, remove hw_timer.h and move its contents into common/
timer.h.
Tracked-On: #8792
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
