This patch creates vm_event support in HV, including:
1. Create vm_event data type.
2. Add vm_event sbuf and its initializer. The sbuf will be allocated by
DM in Service VM. Its page address will then be share to HV through
hypercall.
3. Add an API to send the HV generated event.
Tracked-On: #8547
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Thermal events are delivered through lapic thermal LVT. Currently
ACRN does not support delivering those interrupts to guests by
virtual lapic. They need to be virtualized to provide guests some
thermal management abilities. Currently we just hide thermal
lvt from guests, including:
1. Thermal LVT:
There is no way to hide thermal LVT from guests. But we need do
something to make sure no interrupt can be actually trigered:
- skip thermal LVT in vlapic_trigger_lvt()
- trap-and-emulate thermal LVT in lapic-pt mode
2. As We have plan to introduce virtualization of thermal monitor in the
future, we use a vm flag GUEST_FLAG_VTM which is default 0 to control
the access to it. So that it can help enabling VTM in the future.
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Currently CPU frequency control is hidden to guests, and controlled
by hypervisor. While it is sufficient in most cases, some guest OS may
still need CPU performance info to make multi-core scheduling decisions.
This is seen on Linux kernel, which uses HWP highest performance level
as CPU core's priority in multi-core scheduling (CONFIG_SCHED_MC_PRIO).
Enabling this kernel feature could improve performance as single thread
workloads are scheduled on the highest performance cores. This is
significantly useful for guests with hybrid cores.
The concept is to expose performance interface to guest who exclusively
owns pCPU assigned to it. So that Linux guest can load intel_pstate
driver which will then provide the kernel with each core's schedule
priority.
Intel_pstate driver also relies on CONFIG_ACPI_CPPC_LIB to implement
this mechanic, this means we also need to provide ACPI _CPC in DM.
This patch sets up a guest flag GUEST_FLAG_VHWP to indicate whether
the guest can have VHWP feature.
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
When CPU support MONITOR/MWAIT, OS prefer to use it enter
deeper C-state.
Now ACRN pass through MONITOR/MWAIT to guest.
For vCPUs (ie vCPU A and vCPU B) share a pCPU, if vCPU A uses MWait to enter C state,
vCPU B could run only after the time slice of vCPU A is expired. This time slice of
vCPU A is gone to waste.
For Local APIC pass-through (used for RTVM), the guest pay more attention to
timeliness than power saving.
So this patch hides MONITOR/MWAIT by:
1. Clear vCPUID.05H, vCPUID.01H:ECX.[bit 3] and
MSR_IA32_MISC_ENABLE_MONITOR_ENA to tell the guest VM's vCPU
does not support MONITOR/MAIT.
2. Enable MSR_IA32_MISC_ENABLE_MONITOR_ENA bit for
MSR_IA32_MISC_ENABLE inject 'GP'.
3. Trap instruction 'MONITOR' and 'MWAIT' and inject 'UD'.
4. Clear vCPUID.07H:ECX.[bit 5] to hide 'UMONITOR/UMWAIT'.
5. Clear "enable user wait and pause" VM-execution control, so
UMONITOR/MWAIT causes an 'UD'.
Tracked-On: #8253
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Add hypercall to add/remove asyncio request info. Hv will record the
info in a list, and when a new ioreq is come, hv will check if it is
in the asyncio list, if yes, queue the fd to asyncio buffer.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current IO emulation is synchronous. The user VM need to wait for the
completion of the the I/O request before return. But Virtio Spec
introduces introduces asynchronous IO with a new register in MMIO/PIO
space named NOTIFY, to be used for FE driver to notify BE driver, ACRN
hypervisor can emulate this register by sending a notification to vCPU
in Service VM side. This way, FE side can resume to work without waiting
for the full completion of BE side response.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
As mentioned in previous patch, wbinvd utilizes the vcpu_make_request
and signal_event call pair to stall other vcpus. Due to the fact that
these two calls are not thread-safe, we need to avoid concurrent call to
this API pair.
This patch adds wbinvd lock to serialize wbinvd emulation.
Tracked-On: #7887
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current code would read physical RTC register and return it directly to guest.
This patch would read a base physical RTC time and a base physical TSC time
at initialize stage. Then when guest tries to read vRTC time, ACRN HV would
read the real TSC time and use the TSC offset to calculate the real RTC time.
This patch only support BIN data mode and 24 hour mode.
BCD data mode and 12 hour mode will add in other patch.
The accuracy of clock provided by this patch is limited by TSC, and will
be improved in a following patch also.
Tracked-On: #7440
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add a flag: GUEST_FLAG_PMU_PASSTHROUGH to indicate if
PMU (Performance Monitor Unit) is passthrough to guest VM.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
This patch introduces stateful VM which represents a VM that has its own
internal state such as a file cache, and adds a check before system
shutdown to make sure that stateless VM does not block system shutdown.
Tracked-On: #6571
Signed-off-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the x86_tee hypercall interfaces.
- HC_TEE_VCPU_BOOT_DONE
This hypercall is used to notify the hypervisor that the TEE VCPU Boot
is done, so that we can sleep the corresponding TEE VCPU. REE will be
started at the last time this hypercall is called by TEE.
- HC_SWITCH_EE
For REE VM, it uses this hypercall to request TEE service.
For TEE VM, it uses this hypercall to switch back to REE
when it completes the REE service.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Given an e820, this API creates an identical memmap for specified
e820 memory type, EPT memory cache type and access right.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
With current arch design the UUID is used to identify ACRN VMs,
all VM configurations must be deployed with given UUIDs at build time.
For post-launched VMs, end user must use UUID as acrn-dm parameter
to launch specified user VM. This is not friendly for end users
that they have to look up the pre-configured UUID before launching VM,
and then can only launch the VM which its UUID in the pre-configured UUID
list,otherwise the launch will fail.Another side, VM name is much straight
forward for end user to identify VMs, whereas the VM name defined
in launch script has not been passed to hypervisor VM configuration
so it is not consistent with the VM name when user list VM
in hypervisor shell, this would confuse user a lot.
This patch will resolve these issues by removing UUID as VM identifier
and use VM name instead:
1. Hypervisor will check the VM name duplication during VM creation time
to make sure the VM name is unique.
2. If the VM name passed from acrn-dm matches one of pre-configured
VM configurations, the corresponding VM will be launched,
we call it static configured VM.
If there is no matching found, hypervisor will try to allocate one
unused VM configuration slot for this VM with given VM name and get it
run if VM number does not reach CONFIG_MAX_VM_NUM,
we will call it dynamic configured VM.
3. For dynamic configured VMs, we need a guest flag to identify them
because the VM configuration need to be destroyed
when it is shutdown or creation failed.
v7->v8:
-- rename is_static_vm_configured to is_static_configured_vm
-- only set DM owned guest_flags in hcall_create_vm
-- add check dynamic flag in get_unused_vmid
v6->v7:
-- refine get_vmid_by_name, return the first matching vm_id
-- the GUEST_FLAG_STATIC_VM is added to identify the static or
dynamic VM, the offline tool will set this flag for
all the pre-defined VMs.
-- only clear name field for dynamic VM instead of clear entire
vm_config
Tracked-On: #6685
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Victor Sun<victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Initialize vCBM MSRs
Initialize vCLOSID MSR
Add some vCAT functions:
Retrieve max_vcbm and max_pcbm
Check if vCAT is configured or not for the VM
Map vclosid to pclosid
write_vclosid: vCLOSID MSR write handler
write_vcbm: vCBM MSR write handler
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Remove the acpi loading function from elf_loader, rawimage_loaer and
bzimage_loader, and call it together in vm_sw_loader.
Now the vm_sw_loader's job is not just loading sw, so we rename it to
prepare_os_image.
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When guest kernel has multiple loading segments like ELF format image, just
define one load address in sw_kernel_info struct is meaningless.
The patch removes kernel_load_addr member in struct sw_kernel_info, the load
address should be parsed in each specified format image processing.
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
The API would search ve820 table and return a valid GPA when the requested
size of memory is available in the specified memory range, or return
INVALID_GPA if the requested memory slot is not available;
Tracked-On: #5626
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Allow guest set CR4_VMXE if CONFIG_NVMX_ENABLED is set:
- move CR4_VMXE from CR4_EMULATED_RESERVE_BITS to CR4_TRAP_AND_EMULATE_BITS
so that CR4_VMXE is removed from cr4_reserved_bits_mask.
- force CR4_VMXE to be removed from cr4_rsv_bits_guest_value so that CR4_VMXE
is able to be set.
Expose VMX feature (CPUID01.01H:ECX[5]) to L1 guests whose GUEST_FLAG_NVMX_ENABLED
is set.
Assuming guest hypervisor (L1) is KVM, and KVM uses EPT for L2 guests.
Constraints on ACRN VM.
- LAPIC passthrough should be enabled.
- use SCHED_NOOP scheduler.
Tracked-On: #5923
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Instead of "#include <x86/foo.h>", use "#include <asm/foo.h>".
In other words, we are adopting the same practice in Linux kernel.
Tracked-On: #5920
Signed-off-by: Liang Yi <yi.liang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
