Refine lifecycle manager for windows VM since new commands
are introduced in the lifecycle manager.
v1-->v2:
Implement socket service to receive system shutdown
request command through local host socket.
Add one python script to trigger system shutdown
request in windows VM.
v2-->v3:
Update log message.
v3-->v4:
Support guest shutdown.
v4-->v5:
Update command name.
v5-->v7:
Add resend message logic.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
Provide a script to user to trigger system shutdown request
in service VM or user VM.
System shutdown logic have been integrated in the lifecycle
manager, only need to send system shutdown request command
through unix domain socket in this script.
v3-->v4:
Rewirte system shutdown trigger script using python
since phython script have better portability.
v4-->v5:
Update command name and copyright header.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the monitor module, the following functions are implemented:
-Implement main function of lifecycle manager, it will initialize
other module through invoking related interfaces, wait threads in
the uart module exit.
Todo:
Will refine the name of
init_socket_server_and_shutdown_commands,
init_uart_channel_devs_and_shutdown_commands.
v1-->v2:
Add comments in c file.
v2-->v3:
Update some log message.
v3-->v6:
Update monitior module for modulization.
v6-->v7:
Regiester command handler for ACK receiving timeout case
in user VM.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the log module, the following functions are implemented:
- open_log
Provide one interface to open log file;
-close_log
Provide one interface to close log file;
- LOG_PRINTF LOG_WRITE
Provide interfaces to write log message to log file.
v1-->v3:
Add timestamp in the log message.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the config module, the following functions are implemented:
- load_config
Provide one interface to load lifecycle manager configuration
from config file (life_mngr.conf), in the config file, user
can specify the VM type of VM which lifecycle manager will run
in, the VM name, the communication device name, and
the device name in service VM which is used to communicate with
the VM which is allowed to send system shutdown request.
- check_dir
Check folder exist or not, if not, create the folder
- get_allow_s5_config
Get the name of the device which is allowed to trigger
system shutdown.
v1-->v2:
Add comments in head file.
v2-->v3:
Update some log message.
v3-->v6:
Simply configuration item parsing logic.
Add get_allow_s5_config interface.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In this module, the following functions are implemented:
For uart channel of service VM, implement handlers for sync command,
system shutdown request command, acked poweroff command, vm poweroff
timeout command.
The uart channel commands of service VM and related actions are
described below:
Command Actions
---------------------------------------------------------------
sync Send acked sync
command to uart in user VM
----------------------------------------------------------------
system shutdown If this request is valid, send
request poweroff command to each
connected user VM through uart,
Enable message reseding.
----------------------------------------------------------------
acked poweroff Remove uart of user VM from
command connection list, stop message polling,
if connection list is empty, will
wait for user VM status through check
ACRN DM process instance, if all user
VMs are shutdown, then shutdown
service VM
---------------------------------------------------------
ACK timeout If it is timeout of receiving poweroff ACK,
the action is similar to acked poweroff.
Ohterwise, just disable message reseding.
---------------------------------------------------------
For uart channel of user VM, implement handlers for acked sync
command, poweroff command, acked system shutdown request command,
ACK timeout command.
The uart channel commands of user VM and related actions are
described below:
Command Actions
--------------------------------------------------------
acked sync Print log message
--------------------------------------------------------
poweroff Disconnect uart channel,
exit message polling, close
unix domain socket, shutdown user VM
--------------------------------------------------------
user VM shutdown Exit message polling, close
unix domain socket, shutdown user VM
--------------------------------------------------------
acked system Print log message
shutdown request
-------------------------------------------------------
ACK timeout Disconnect uart channel,
exit message polling, close
unix domain socket
---------------------------------------------------------
For socket server in each VM, implement handler for system
shutdown request.
In user VM, forward this command to service VM through uart.
In service VM, send poweroff command to each connected user VM
through uart.
Implement handler for user VM shutdown request in socket server of
service VM, send user VM shutdown command to user VM which is
specified in the user VM shutdown request message.
v1-->v2:
Add comments in c file and head file.
v2-->v3:
Update commit message about allow s5 command and update
some log message.
v3-->v4:
Guest shutdown support.
v4-->v5:
Update command name.
v5-->v6:
Move uart channel operations into uart channel module.
v6-->v7:
Set resend requirement for some commands.
Add ACK receiving timeout handler for user VM.
v7-->v8:
Update message reseding enable, this interface will be
called before sending message.
v8-->v9:
Use strlen to calculate the length of string, this will be
the parameter of send_message_by_uart.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the command module, the following functions are implemented:
- register_command_handler
Provide one interface to register command handler, other module
can use this interface to register multiple handler for one command.
- find_command
Provide one interface to find a command instance by name;
- dispatch_command_handlers
Provide one interface to dispatch the command and invoke registered
handler.
v1-->v2:
Add comments in head file.
v2-->v3:
Update interface name since "dm" prefix is useless.
Update some log message.
v3-->v4:
Support guest shutdown.
v4-->v5:
Refine command name and add parameter check for interface.
v5-->v6:
Remove allow s5 command.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
This module is to implement unix domain socket server, operator
can connect this server to send system shutdown request, or
guest shutdown command.
In the socket module, the following functions are implemented:
- open_socket
Provide one interface to open one unix domain socket server,
in this interface, initialize a socket, create one thread to
listen to client, another thread to poll message from client;
- close_socket
Provide one interface to close one unix domain socket server;
- write_socket_char
Provide one interface to send message to client.
- find_socket_client
Find socket client instance according to fd
- init_socket
Initialize a socket
- deinit_socket
Deinit a socket
v1-->v3:
Update interface name, only unix domain socket
server is implemented in this module.
v3-->v4:
Add socket client name to support guest shutdown
v4-->v6:
Add find_socket_client, init_socket, deinit_socket
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the uart module, the following functions are implemented:
- init_uart_channel
Initialize each field of uart channel instance.
- create_uart_channel_dev
Create one channel device instance to store information about
one uart channel device which will be opened.
- wait_uart_channel_devs_threads
Wait uart channel devices threads to exit
- destroy_uart_channel
Destroy uart channel and release channel device instance
- listen_uart_channel_dev
Wait to connect device in uart channel
- connect_uart_channel_dev
Send sync message every 5 second
- poll_and_dispatch_uart_channel_events
Poll and dispatch message received from uart channel
- find_uart_channel_dev
Find uart channel device instance according to fd
- find_uart_channel_dev_by_name
Find uart channel device instance according to device name
- disconnect_uart_channel_dev
Disconnect uart channel device instance
- stop_listen_uart_channel_dev
Stop to listen uart channel device
- enable_uart_channel_dev_resend
Set the uart channel device resending buffer and
resending time
- enable_all_uart_channel_dev_resend
Enable resend for all connected uart channel devices
- disable_uart_channel_dev_resend
Clear the uart channel device resending buffer and
resending time
- notify_all_connected_uart_channel_dev
Send message to each connected uart channel device
- check_uart_channel_connection_list_empty
Check whether uart channel connection list is empty or not
TODO:
Will refine resending logic in the
poll_and_dispatch_uart_channel_events, and add
SYNC command resending.
v3-->v4:
Initialize each field of uart channel instance.
Add one flag indicating master channel device.
Update interface names.
v4-->v5:
Refine interface name.
v5-->v6:
Move uart channel operations from command handler module
v6-->v7:
Add enable_uart_channel_dev_resend and
disable_uart_channel_dev_resend;
Fix bugs about receiving message timeout.
v7-->v8:
Add enable_all_uart_channel_dev_resend interface.
v8-->v9:
Update error handling.
Use strlen to calculate the length of string, this will be
the parameter of send_message_by_uart.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
In the uart module, the following functions are implemented:
- init_uart_dev
Allocate UART device instance and initialize UART device
according to device name.
- deinit_uart_dev
Close UART devcie and free UART device instance.
- send_message_by_uart
Set handler to handle received message.
- receive_message_by_uart
Receive message and retry RETRY_RECV_TIMES time to
avoid miss message in some cases.
- get_uart_dev_fd
Get the file descriptor of a UART device
- get_uart_dev_path
Get the name of a UART device
v1-->v2:
Update sync logic between uart in service VM and uart in
user VM, lifecycle manager will not depend on VM boot order.
Add code comments.
v2-->v3:
This module only includes UART device operations, move other
logic into uart channel module.
v3-->v4:
Add parameters check for interface and refine some names.
v4-->v5:
Refine interface parameter type, error value.
v5-->v6:
Update condition check format of deinit_uart_dev.
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
Reviewed-by: fei1.li@intel.com
Generate serial configuration file for service VM according
to scenario file and vUART ports base address allocated by
config tool.
Currently, some non-standard serial ports are emulated in
hypervisor and will be used to do communication between service
VM and user VM, so need to generate serial configuration file
to configure these serial ports for service VM.
v1-->v2:
Fix some type issues
Refine script code format
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
The pre-rtvm uses the RTCT tab to determine it's SSRAM address.
It was origionally duplicated from the host, and keeped its address
and layout.
To move the SSRAM area in ve820, we have to modify the guest's RTCT
tab first.
This patch uses the board_inspector's RTCT module to parse the host's
RTCT tab, and calculate the offset, then modifies the SSRAM/bin enties,
and saves it to the new RTCT bin file.
Tracked-On: #6674
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
The config of MAX_EFI_MMAP_ENTRIES has been removed in hypervisor, so remove
this config in config_tools;
Tracked-On: #6442
Signed-off-by: Victor Sun <victor.sun@intel.com>
when we click the "Import XML" button to import the scenario xml file, then
click the "Export XML" to export the xml files, we will find some errors because
UI don't show the default value set in schema.
As a workaround, we call default_populator.py in UI to expand the default value
in the scenario XML file to fix the issue.
Tracked-On: #6292
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
This reverts commit 9e2edd5192.
Because config UI don't support multi legacy vuart in current logic,
we need to revert the commit to unblock UI.
Tracked-On: #6652
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
since PRs #6760 and #6765 have landed,
we also need to rename "UOS" to "user vm" in UI.
Tracked-On: #6744
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
when we add two or more virtio block devices and rename them for a VM
in launch xml files, then generate launch scripts through the UI.
After ensuring the devices names are different, we repeat these operations
continuously. Finally we will get the duplicate PT_SLOT value 30 for
different virtio block devices in a launch script. This is wrong.
As a workaround, we reassign PT_SLOT variate to reset it after the launch
script is generated every time.
Tracked-On: #6767
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
since PRs #6760 and #6747 have renamed uos to user_vm,
we also need to rename it in config UI.
Tracked-On: #6744
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. remove hvlog parameter in bootargs for all platforms.
2. update HV_RAM_START default address from 2MB to 4MB.
3. add the check that the HV_RAM_START value should be larger
than or equal to 2MB and 2MB aligned.
Tracked-On: #6663
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
In this patch, add vuart configuration in scenario XML of
each board to support communication between service VM and
user VM since system shutdown feature need to send commands
through this vuart communication channel.
The follow changes are made in this patch:
- Add multi legacy vuart for service VM for communication
- Add one legacy vuart for user VM for communication
- Add 8250.nr_uarts parameter in command line of service OS
Tracked-On: #6652
Signed-off-by: Xiangyang Wu <xiangyang.wu@intel.com>
1. "make clean && make BOARD=nuc11tnbi5 SCENARIO=shared" will generate the acrn debian package.
2. "make clean && make board_inspector" will generate the acrn board_inspector debian package
Tracked-On: #6688
Signed-off-by: Hu Fenglin <fenglin.hu@intel.com>
Rename SOS_VM type to SERVICE_VM
rename UOS to User VM in XML description
rename uos_thread_pid to user_vm_thread_pid
rename devname_uos to devname_user_vm
rename uosid to user_vmid
rename UOS_ACK to USER_VM_ACK
rename SOS_VM_CONFIG_CPU_AFFINITY to SERVICE_VM_CONFIG_CPU_AFFINITY
rename SOS_COM to SERVICE_VM_COM
rename SOS_UART1_VALID_NUM" to SERVICE_VM_UART1_VALID_NUM
rename SOS_BOOTARGS_DIFF to SERVICE_VM_BOOTARGS_DIFF
rename uos to user_vm in launch script and xml
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename SOS_VM_NUM to SERVICE_VM_NUM.
rename SOS_SOCKET_PORT to SERVICE_VM_SOCKET_PORT.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename PCI_DEV_TYPE_SOSEMUL to PCI_DEV_TYPE_SERVICE_VM_EMUL.
rename SHUTDOWN_REQ_FROM_SOS to SHUTDOWN_REQ_FROM_SERVICE_VM.
rename PROCESS_RUN_IN_SOS to PROCESS_RUN_IN_SERVICE_VM.
rename SHUTDOWN_REQ_FROM_UOS to SHUTDOWN_REQ_FROM_USER_VM.
rename UOS_SOCKET_PORT to USER_VM_SOCKET_PORT.
rename SOS_CONSOLE to SERVICE_VM_OS_CONSOLE.
rename SOS_LCS_SOCK to SERVICE_VM_LCS_SOCK.
rename SOS_VM_BOOTARGS to SERVICE_VM_OS_BOOTARGS.
rename SOS_ROOTFS to SERVICE_VM_ROOTFS.
rename SOS_IDLE to SERVICE_VM_IDLE.
rename SEVERITY_SOS to SEVERITY_SERVICE_VM.
rename SOS_VM_UUID to SERVICE_VM_UUID.
rename SOS_REQ to SERVICE_VM_REQ.
rename RTCT_NATIVE_FILE_PATH_IN_SOS to RTCT_NATIVE_FILE_PATH_IN_SERVICE_VM.
rename CBC_REQ_T_UOS_ACTIVE to CBC_REQ_T_USER_VM_ACTIVE.
rename CBC_REQ_T_UOS_INACTIVE to CBC_REQ_T_USER_VM_INACTIV.
rename uos_active to user_vm_active.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Improve the logging readibility for the Board Inspector tool by adding
a space after "Error:" and "Warning:" instead of have the text directly
attached to it.
Tracked-On: #6736
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Commit 4a04fcc ("config_tools: skip remapping HW units with no devices under
scope") skips hardware remapping units without any device under its scope in the
config tools, which turns out to only work if the HV is not parsing the DMAR at
runtime.
This patch reverts the previous workaround and fixes the previous issue by
always initializing `dmar_hw_list.hw_ignore` when parsing DMAR. This ensures
that the DRHDx_IGNORE macro will always be emitted while DRHD_COUNT is not
impacted.
Fixes: 4a04fcc ("config_tools: skip remapping HW units with no devices under scope")
Tracked-On: #6709
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Fix a crash in the 'board_inspector.py' tool in case 'cpuid' is not
installed on the system.
The tools crashes because 'cpuid' is used before the check for
dependencies is done in the code. That check for dependencies is
done in the 'legacy/board_parser.py' file. But the native_check()
function that is called before it also expects the cpuid tool to
be installed.
The fix is to move the check for dependencies in the main
'board_inspector.py' file, before any other operation is done.
Tracked-On: #6719
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
We should generate new board xmls for cfl,whl and nuc11 because of the
board inspector changes. For the details refer to these RPs:#6699 #6710
Tracked-On:#6709
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
For vCAT, it may need to store more than MAX_VCPUS_PER_VM of closids,
change clos in vm_config.h to a pointer to accommodate this situation
Rename clos to pclosids
pclosids now is a pointer to an array of physical CLOSIDs that is defined
in vm_configurations.c by vmconfig. The number of elements in the array
must be equal to the value given by num_pclosids
Add max_type_pcbm (type: l2 or l3) to struct acrn_vm_config, which stores a bitmask
that selects/covers all the physical cache ways assigned to the VM
Change vmsr.c to accommodate this amended data structure
Change the config-tools to generate vm_configurations.c, and fill in the num_closids
and clos pointers based on the information from the scenario file.
Now vm_configurations.c.xsl generates all the clos related code so remove the same
code from misc_cfg.h.xsl.
Examples:
Scenario file:
<RDT>
<RDT_ENABLED>y</RDT_ENABLED>
<CDP_ENABLED>n</CDP_ENABLED>
<VCAT_ENABLED>y</VCAT_ENABLED>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0x7ff</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
<CLOS_MASK>0xff800</CLOS_MASK>
/RDT>
<vm id="0">
<guest_flags>
<guest_flag>GUEST_FLAG_VCAT_ENABLED</guest_flag>
</guest_flags>
<clos>
<vcpu_clos>3</vcpu_clos>
<vcpu_clos>4</vcpu_clos>
<vcpu_clos>5</vcpu_clos>
<vcpu_clos>6</vcpu_clos>
<vcpu_clos>7</vcpu_clos>
</clos>
</vm>
<vm id="1">
<clos>
<vcpu_clos>1</vcpu_clos>
<vcpu_clos>2</vcpu_clos>
</clos>
</vm>
vm_configurations.c (generated by config-tools) with the above vCAT config:
static uint16_t vm0_vcpu_clos[5U] = {3U, 4U, 5U, 6U, 7U};
static uint16_t vm1_vcpu_clos[2U] = {1U, 2U};
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags = (GUEST_FLAG_VCAT_ENABLED),
.pclosids = vm0_vcpu_clos,
.num_pclosids = 5U,
.max_l3_pcbm = 0xff800U,
},
{
.pclosids = vm1_vcpu_clos,
.num_pclosids = 2U,
},
};
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add the VCAT_ENABLED element to RDTType so that user can enable/disable vCAT globally
Add the GUEST_FLAG_VCAT_ENABLED guest flag to enable/disable vCAT per-VM.
Currently we have the following per-VM clos element in scenario file for RDT use:
<clos>
<vcpu_clos>0</vcpu_clos>
<vcpu_clos>0</vcpu_clos>
</clos>
When the GUEST_FLAG_VCAT_ENABLED guest flag is not specified, clos is for RDT use,
vcpu_clos is per-CPU and it configures each CPU in VMs to a desired CLOS ID.
When the GUEST_FLAG_VCAT_ENABLED guest flag is specified, vCAT is enabled for this VM,
clos is for vCAT use, vcpu_clos is not per-CPU anymore in this case, just a list of
physical CLOSIDs (minimum 2) that are assigned to VMs for vCAT use. Each vcpu_clos
will be mapped to a virtual CLOSID, the first vcpu_clos is mapped to virtual CLOSID
0 and the second is mapped to virtual CLOSID 1, etc
Add xs:assert to prevent any problems with invalid configuration data for vCAT:
If any GUEST_FLAG_VCAT_ENABLED guest flag is specified, both RDT_ENABLED and VCAT_ENABLED
must be 'y'
If VCAT_ENABLED is 'y', RDT_ENABLED must be 'y' and CDP_ENABLED must be 'n'
For a vCAT VM, vcpu_clos cannot be set to CLOSID 0, CLOSID 0 is reserved to be used by hypervisor
For a vCAT VM, number of clos/vcpu_clos elements must be greater than 1
For a vCAT VM, each clos/vcpu_clos must be less than L2/L3 COS_MAX
For a vCAT VM, its clos/vcpu_clos elements cannot contain duplicate values
There should not be any CLOS IDs overlap between a vCAT VM and any other VMs
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. remove HV_RAM_SIZE and CONFIG_HV_RAM_SIZE in the related python
code, schema and all existing scenario XMLs because PR 6664 has
changed it in HV side.
2. set HV_RAM_START default value to 2M.
Tracked-On: #6663
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
It is seen on some platforms that the ACPI DMAR tables will report
remapping hardware units that does not have any device under its scope,
which is not expected by the board inspector previously and thus causes the
tool to generate inconsistent configuration data.
This patch makes the board inspector skip such remapping hardware units. It
does not impact the functionality of the hypervisor as no device is managed
by those skipped remapping units.
Tracked-On: #6709
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
In commit of 7cc9c8fe06
the pre-launched VM was set to ACPI HW Reduced platform, then the IRQ
would be allocated from 0 for PCI MSI devices. The Intel igb/igc driver
might get IRQ 8 when do request irq which would conflict with the irq
of RTC device:
[ 14.264954] genirq: Flags mismatch irq 8. 00000000 (enp0s8-TxRx-3) vs.
00000000 (rtc0)
[ 14.265411] ------------[ cut here ]------------
[ 14.265508] kernel BUG at drivers/pci/msi.c:376!
[ 14.265610] invalid opcode: 0000 [#1] PREEMPT SMP
[ 14.265710] CPU: 0 PID: 296 Comm: connmand Not tainted 5.10.52-acrn-sos
-dirty #72
[ 14.265863] RIP: 0010:free_msi_irqs+0x182/0x1b0
This patch will specify some legacy PnP device like UART and RTC in ACPI
DSDT table of pre-launched VM, so that IRQs from IOAPIC pin 4/3/8 could be
preserved before MSI device requesting IRQs.
Tracked-On: #6704
Signed-off-by: Victor Sun <victor.sun@intel.com>
Remove the restriction that SERIAL_CONSOLE needs to be ttys0, ttys1,
ttys2 or ttys3.
1. Lossen the restriction in xsd.
2. Rewrite the document.
3. Refine the intx.py. Refine the logic which take effect if the <irq>
is specified in "SOS_COM#_IRQ" for SOS VM's legacy vuart 0.
Tracked-On: #6610
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
add hybrid_rt.xml file under the generic_board folder so that
UI can call pre_rt_vm type when the user clicks 'Add a VM below'
button to add a new pre_rt_vm.
Tracked-On: #6292
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
call default_populator.py to expand the default value in the
scenario XML file to fix the issue that don't export xml successfully
in UI when user to click the 'Export XML' button to export scenario xml
file because that the unexpanded xml does not conform to schema check.
Tracked-On: #6292
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
According to TCG ACPI specification (version 1.2), the current revision of
TPM2 table, which has the optional log area fields, is 4. This patch
updates the revision of vTPM2 accordingly.
Tracked-On: #6288
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
ACPI device drivers use both _HID and _CID to identify devices they
match. This patch copies _CID objects to vACPI devices so that guest
drivers can recognize the passthrough devices properly.
Tracked-On: #6288
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
If a legacy vuart base is configured as "CONFIG_COM_BASE", allocate a
base with unused io-port address with length 0x10.
The post-launched VM's unused io-port address range is [0xD00, 0xFFFF].
The pre-launched VM's unused io-port address range is [0xD00, 0xFFFF]
but the passthrough devices' io-port address are reserved.
The SOS VM's unused io-port address range is [0xD00, 0xFFFF] but any
native devices' io-port address are reserved. However, the io-port
address which is passed through to any pre-launched is reusable.
Tracked-On: #6652
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Expand the capacity of legacy vuarts per VM. This change is applied to
manual scenario xml editing only.
A SOS VM can choose io port 0x3F8, 0x2F8, 0x3E8, 0x2E8 by selecting
SOS_COM1_BASE, SOS_COM2_BASE, SOS_COM3_BASE, SOS_COM4_BASE respectively.
Non SOS VM can choose io port 0x3F8, 0x2F8, 0x3E8, 0x2E8 by selecting
COM1_BASE, COM2_BASE, COM3_BASE, COM4_BASE respectively.
For any type of VM, selecting "CONFIG_COM_BASE" allows configuration tool
to pick an available io port from hardcoded list:
['0xA000', '0xA010', '0xA020', '0xA030', '0xA040', '0xA050', '0xA060', '0xA070']
A SOS VM can choose irq 4 by selecting SOS_COM1_IRQ and SOS_COM3_IRQ, and choose irq 3 by selecting SOS_COM2_IRQ and SOS_COM4_IRQ.
Non SOS VM can choose irq 4 by selecting COM1_IRQ and COM3_IRQ, and choose irq 3 by selecting COM2_IRQ and COM4_IRQ.
For SOS VM, selecting "CONFIG_COM_IRQ" allows configuration tool
to pick an available irq based on AVAILABLE_IRQ_INFO. For non SOS VM, it
will allocate an available irq from [1, 15].
Tracked-On: #6652
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
1. move tgl-rvp and ehl-crb-b folders under data directory to 1source.
2. delete nuc7i7dnb and whl-ipc-i7 folders under data directory.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
Pass through the io-ports for the passthrough pci devices of
pre-launched VM.
Three parts to support this feature:
1. Identical map the pci devices io-port address for pre-launched VM
2. Set the io-ports address range to DSDT
3. Avoid to allocate the bar index for VMSIX
Tracked-On: #6620
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Without this ``iomem=relaxed`` kernel parameter, the generated board XML
is essentially the same as having ``--basic`` when executing the board
inspector, i.e. the ACPI namespace will not be parsed. The generated
board XML may still work, but some functionality (e.g. passthru of TPM
and other PCI devices that need INTx) will no longer work due to lack of
hardware information.
Replacing PR #6618
Tracked-On: #5692
Signed-off-by: zhongzhenx.liu <zhongzhenx.liu@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch adds a new priority based scheduler to support
vCPU scheduling based on their pre-configured priorities.
A vCPU can be running only if there is no higher priority
vCPU running on the same pCPU.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Simplify the statement by TPM2 enablement detection and present TPM2 device.
Remove the function and move the statement to misc_cfg.h.xsl
Tracked-On: #6562
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
The default value population algorithm introduced by commit
2bfaa34 ("config_tools: populate default values in scenario XML") only
populates default values to the first occurrence of a tag when the tag is
specified to allow multiple occurrences under an xs:all node. This may lead
to incomplete scenario XML as some of the default values are missed.
This patch fixes this issue by checking **all** nodes having the same tag
under a node specified by an xs:all schema.
Fixes: 2bfaa34 ("config_tools: populate default values in scenario XML")
Tracked-On: #6292
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Now ACRN support platform which CPU numbers are large than 10. So the old value
for DEV_PATH_LEN is not enough (18 is not enough for /dev/acrn_trace_xx).
Tracked-On: #6572
Signed-off-by: Fei Li <fei1.li@intel.com>
The execution order of the "modprobe pci_stub" command is erroneous
in the launch script generation logic. The "modprobe pci_stub" command
should be executed before unbinding passthru devices, so we adjust the
command excution order.
Tracked-On: #6565
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
While we have default values of configuration entries stated in the schema
of scenario XMLs, today we still require user-given scenario XMLs to
contain literally ALL XML nodes. Missing of a single node will cause schema
validation errors even though we can use its default value defined in the
schema.
This patch allows user-given scenario XMLs to ignore nodes with default
values. It is done by adding the missing nodes, all containing the defined
default values, to the input scenario XML when copying it to the build
directory. This approach imposes no changes to either the schema or
subsequent scripts in the build system.
Tracked-On: #6292
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
In e2fsprogs v1.46.2, s_volume_name is defined with attribute
nonstring. According to gcc doc, nostring defined string may
not contain a terminating NULL. So array safed function should
be used.
We use strncmp instead of strcmp to do comparing here.
Tracked-On: #6494
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
1. For initial UI, rename "ACRN Config" to "ACRN Configurator",
rename "Scenario Setting" to "Scenario Settings", rename "Launch Setting"
to "Launch Settings", and rename "Import Board info" to "Import Board XML";
2. For UI scenario selection, change title "Load Scenario Setting" to
"Load Default Scenario Settings", Change title "Save as" to "Save Scenario XML",
and rename "XML Name" to "Scenario XML Name";
7. For UI launch selection, rename "Load Launch setting" to
"Load Default Launch Settings", change title "Save as" to "Save Launch XML",
change "XML Name" to "Launch XML Name" and Change "Source Path" to "Launch XML Path".
Tracked-On: #6417
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The pattern matching logic (used by 'tr') is erroneous in the launch
script generation logic. While its purpose is to return the CPU number
from the 'cpuX' string (where 'X' is the CPU number),
it does it incorrectly for any multiple of 10. Examples:
- Processing 'cpu10' returns 1 (instead of 10)
- Processing 'cpu20' returns 2 (instead of 20)
This patch changes the [1-99] pattern matching to [0-9] which fixes it.
This error led to the incorrect CPU cores being used (and offlined)
for some VMs which could lead to confusing problems especially when
an exclusive use of that CPU core was assumed and expected (e.g. RTVM).
when CONFIG_BOOTPARAM_HOTPLUG_CPU0 is turned on in the kernel,
there is a risk that we try to offline cpu0. So we also add extra check
for cpu0 to aviod the risk.
Tracked-On: #6482
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The whitespaces between delimiter saperated elemnts of a list causes
acrn:get-common-clos-max and acrn:find-list-min returns unexpected
numbers.
Translate the whitespaces to nothing and rewrite acrn:find-list-min and
acrn:get-common-clos-max.
Tracked-On: #6515
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
rename the industry folder to shared folder ,and also rename the
logical_partition folder to partitioned under the generic_code directory.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. Rename industry.xml to shared.xml
2. Rename logical_partition.xml to partitioned.xml.
3. Update the name in view.py correspondingly.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
for ehl-crb-b platform, update sos rootfs from "dev/sda3"
to "/dev/nvme0n1p3" in hybrid.xml file.
Tracked-On: #6530
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
For SMBIOS and TPM, enable SECURITY_VM_FIXUP and add GUEST_FLAG_SECURITY_VM
flag in TGL hybrid_rt.xml. Then disable SECURITY_VM_FIXUP in TGL hybrid.xml
because it’s previously enabled in hybrid.xml instead of hybrid_rt.xml by
mistake.
Tracked-On: #6320
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The bdf of gpu is not 00:02.0 for the new platform icx-rvp,
it is 05:00.0 now, so we remove the hardcode 00:02.0;
And change to get the gpu bdf from board.xml.
Tracked-On: #6357
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
This patch renames the GUEST_FLAG_TPM2_FIXUP to
GUEST_FLAG_SECURITY_VM.
v2 -> v3:
The "FIXUP" suffix is removed.
Tracked-On: #6320
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
1. set the content of the bootargs tag to empty for KERNEL_ELF type
in hybrid xml files.
2. update generic_board.xml with the latest nuc11tnbi5.xml to fix
compile fail issue.
Tracked-On: #6461
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
remove the log "<board>.xml has been generated successfully!" in
board_parser.py, because it only mean that the board xml file have
been created sucessfully here, not the all data have been appended
successfully and pretty formatted.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. as a workaround, comment the code to check MBA_DELAY tag when
creating a new scenario xml setting because of this tag are retrived
from scenario xml files in generic_board folder where it is removed
now.
2. update the template launch xml file names according the recent
update for launch xml files in generic folder.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
MAXIMUM_PA_WIDTH will be calculated from board information.
Tracked-On: #6357
Signed-off-by: Liang Yi <yi.liang@intel.com>
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
It is used to specify the maximum number of EFI memmap entries.
On some platforms, like Tiger Lake, the number of EFI memmap entries
becomes 268 when the BIOS settings are changed.
The current value of MAX_EFI_MMAP_ENTRIES (256) defined in hypervisor
is not big enough to cover such cases.
As the number of EFI memmap entries depends on the platforms and the
BIOS settings, this patch introduces a new entry MAX_EFI_MMAP_ENTRIES
in configurations so that it can be adjusted for different cases.
Tracked-On: #6442
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Update lpc slot to origin value 1 from 31 in the script too,
because GOP driver has assumption to config space layout of
the device on 00:1f.0.
Tracked-On: #6340
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
1. rename “cli.py” to “board_inspector.py”,
and update the script name in README file.
2. rename “app.py” to “acrn_configurator.py”.
Tracked-On: #6417
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
In the default config file for hybrid scenario, zephyr image was
configured as KERNEL_RAWIMAGE. Now we change them to KERNEL_ELF
for all the platforms. And also kernel mods are changed from
Zephyr_RawImage to Zephyr_ElfImage
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Rename KERNEL_ZEPHYR to KERNEL_RAWIMAGE. Added new type "KERNEL_ELF".
Add CONFIG_GUEST_KERNEL_RAWIMAGE, CONFIG_GUEST_KERNEL_ELF and/or
CONFIG_GUEST_KERNEL_BZIMAGE to config.h if it's configured.
Tracked-On: #6323
Signed-off-by: Yang,Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
remove some tags check for scenario xml files in generic_board folder when
importing a new type of board in UI, and minor fix for the warning of config
editor.
Tracked-On: #6315
Signed-off-by: Kunhui-Li <kunhuix.li@intel.com>
The term PSRAM is now obsoleted and should be replaced with SSRAM, as has been
done by commit 9facbb43b3 ("config-tool: rename PSRAM to SSRAM"). However,
there are two places in the configuration toolset that still uses PSRAM. This
patch updates these missed occurrences accordingly.
Tracked-On: #6012
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
