this patch fixes such an information leaking issue:
in case that after a UOS is destroyed, its memroy
will be reclaimed and maybe re-allocated for a new UOS,
then the previous UOS sensitive data in memory may
be leaked to the new UOS.
Tracked-On: #1825
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update the User (guest) OS launch script with the Clear Linux
version used with ACRN v0.3 as well as the corresponding kernel
version.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
The /dev/vbs_ipu is used by the backend driver of IPU mediator on SOS kernel
If the file of /dev/vbs_ipu exists, it indicates that IPU works in mediator mode.
Other it will fall back to the pass-through mode.
But the commit 969f7cf071 doesn't check the file of /dev/vbs_ipu correctly.
It should be -e instead of -f.
Tracked-on: https://github.com/projectacrn/acrn-hypervisor/issues/1373
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Wu, BinBin <binbin.wu@intel.com>
At devicemodel/hw/uart_core.c, struct ttyfd has only one file
descriptor for uart backend device, that is OK if DM uart open
a tty characteor device under /dev/ for reading, writing and
terminal operating.
When use stdio as backend tty device, there are 2 fds, stdin/stdout.
DM should read from 'stdin' and output to 'stdout'. But ttyfd just
has one fd, and is only for 'stdin', so dm has to output to stdin,
too, not to stdout.
That cause a problem: if use stdio for uart backend, you can't
redirect UOS console to any other files. Because stdout is not used.
We hope to store information from VM console to system journal,
when UOS is launched by Acrnd automatically. The systemd need to
redirect stdout of dm to system journal files, but it can't be done.
So we can split the 'fd' of struct ttyfd to 'fd_in' & 'fd_out'.
they are same when use tty device; And they are different when use
stdio, 'fd_in' is for stdin and 'fd_out' is for stdout.
Tracked-On: #1759
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Like Yan <like.yan@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
To support expose "interrupt storm monitor" params setting to user;
it is easy to adjust the params in launch UOS script.
Tracked-On: #1724
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
modify and add interface to set interrupt monitor params;
it can be set by acrn-dm input arguments like following:
--intr_monitor 10000,10,1,100
the 4 params order is:
interrupt storm theshold per second,
probe period to get interrupt data,
pass-through devices' interrupt injection delay time,
delay duration, after it, stop injection & restore to normal
Tracked-On: #1724
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Yin Fengwei <fengwei.yin@intel.com>
Difficult to review the changes of sos_bootargs when the args is a single line.
Split sos boot args into multiple lines.
Tracked-On: #1730
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
IOC mediator should keep sending acnrd boot reason until received
UOS heartbeat init message, then turn to send SOS wakeup reason
through read native cbc lifecycle cdev.
Tracked-On: #1727
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
remove these options from legacy release:
i915.tsd_init=7 i915.tsd_delay=2000
i915.enable_preemption=1 i915.context_priority_mode=2
Tracked-On: #1697
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
(EV_MSC, MSC_TIMESTAMP) is added to each frame just before the
SYN event since kernel 4.15. EV_MSC is configured as
INPUT_PASS_TO_ALL. In the use case of virtio-input, there is
a loop as follows:
- A mt frame with (EV_MSC, MSC_TIMESTAMP) is passed to FE.
- FE will call virtinput_status to pass (EV_MSC, MSC_TIMESTAMP)
back to BE.
- BE writes this event to evdev. Because (EV_MSC, MSC_TIMESTAMP)
is configured as INPUT_PASS_TO_ALL, it will be written into
the event buffer of evdev then be read out by BE without
SYN followed.
- Each mt frame will introduce one (EV_MSC, MSC_TIMESTAMP).
Later the frame becomes larger and larger...
This patch fixed above issue by ignoring MSC_TIMESTAMP from guest.
Besides that timestamp is added for every status event from guest
before writing to evdev.
Tracked-On: #1670
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
For CS of UOS, we would like to pass all related info (cs attribute,
limit, base) from DM.
Tracked-On: #1231
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
For GP-MRB ACRN using ttyS0 as console,
since this is release bootargs file so ttyS0
will be skipped in booting but needed kernel
console ttyS2 in bootargs to get the Kernel console.
Tracked-On: #1655
Signed-off-by: santoshkumar <santoshkumar.laxminarayan.rai@intel.com>
The FW reset is currently detected from two points upon
a read failure from native read and from the reset
handler.
The fix removes the detection from the mevent rx callback,
leaving a single detection point.
To prevent reset hiccup, hw_ready is not set if a full rescan is
performed, it will be set only when virtio FW will request the FW reset.
Tracked-On: #1632
Signed-off-by: Aviad Nissel <aviad.nissel@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Simplify the flow by adding mutex_type variable
and call pthread_mutexattr_destroy() on the error path.
Tracked-On: #1630
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Accoring to xHCI spec, there are some TRBs with zero data length
which used to pass command to xHCI. In the DM, those TRBs should
not be sent to native device through libusb. The logic in the
current implentation fails to process some corner cases, this
patch is used to fix it.
Tracked-On: #1639
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
on 8GB MRB: cat /proc/meminfo|head -n 1|awk '{print $2}'
it is: 7993388, it is not 8000000, so set it compare
with 7500000, then it can allocate 6GB to UOS.
Tracked-On: #1657
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
- Put version.h, vmcfg_config.h, .config into DM_OBJDIR like what's
already done in hypervisor and tools, it does not have to stay in
source or else a extra entry in .gitignore is needed.
- Change some implicit targets to explicit targets, include:
vmcfg_header -> $(DM_OBJDIR)/include/vmcfg_config.h
$(PROGRAM) -> $(DM_OBJDIR)/$(PROGRAM)
then $(DM_OBJDIR)/include/vmcfg_config.h would be depended by
$(DM_OBJDIR)/%.o without the need involving in a extra implicit
target vmcfg_header. (And it's not set in .PHONY)
- These header targets vmcfg_config.h and version.h should be depended
by $(DM_OBJDIR)/%.o target instead of by all target, and this is done
since they are in HEADERS now.
- Drop redundant clean commands and fix some bad styled coding, like
multiple blanks in a line.
Tracked-On: #1599
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Change kernel boot cmdline to load GuC firmware for SOS.
We want to enable GuC and HuC in Service OS and this is
an effort to enable use cases across all boards.
Tracked-on: #1638
Proposed-by: Charles, Daniel <daniel.charles@intel.com>
Signed-off-by: Chang, Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Change kernel boot cmdline to load GuC firmware for SOS.
We want to enable GuC and HuC in Service OS and this is
an effort to enable use cases across all boards.
Tracked-On: #1638
Proposed-by: Charles, Daniel <daniel.charles@intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
The virtual rpmb key transfer path is ready now, so replace
previous temporary fixed key solution with random key
solution.
Tracked-On: #1636
Signed-off-by: Qi Yadong <yadong.qi@intel.com>
Acked-by: Zhu Bing <bing.zhu@intel.com>
- remove ASSERT & DEASSET IRQ line IOCTLs
- remove PULSE IRQ line IOCTLs, use set/clear
IRQ line instead.
- Use IC_SET_IRQLINE to set or clear IRQ line
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Virtio-console device specific configuration is readonly, callback
for the cfgwrite is not required. This patch removed the unused
virtio_console_cfgwrite.
Tracked-On: #1364
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Will attempt to access element 2048..2049 of
array "ptr32" if below conditions are both true:
1) ptr32[i] == MULTIBOOT_HEAD_MAGIC
2) (i == (ELF_BUF_LEN/4) - 1)
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Fengwei Yin <fengwei.yin@intel.com>
Remove the changing operation for 'xdev->native_ports[].state' in
pci_xhci_cmd_disable_slot. The operation should not be done in this
funciton.
Tracked-On: #1589
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
On certain SOC, during the system suspend and resume process, connecting
and disconnecting events may happen. In previous implementation, DM didn't
clear PED bit in the xHCI PORTSC register, this will induce many invalid
polling operations in UOS and fail to enumerate one or more USB devices.
Tracked-On: #1589
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When the LINK type TRB are received, it should not be counted as
valid date block to give libusb. This patch is used to fix it.
Tracked-On: #1567
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
The function for port unassigning: pci_xhci_clr_native_port_assigned
should reset the 'info' member to all zero when it is called.
Tracked-On: #1434
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
This issue is result from reporting interrupt when the interrupt ability
of virtual xHCI is disabled.
As Event Ring State Machine showed in Figure 20 of xHCI spec, following
rules should be followed:
1 when RS bit of USBCMD register is zero, Event Ring should not be accessed;
2 when INTE bit of USBCMD register is zero, Interrupt should not be sent.
Tracked-On: #1566
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liang Yang <liang3.yang@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
When usb device numbers reach up to XHCI_MAX_SLOTS. The slot_allocated
array will get out of range. This patch is used to fix this issue.
Tracked-On: #1479
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
After excap pointer is assigned, it should be checked whether it's
possible to get assignment for NULL pointer or not. This patch
fixes this issue.
Tracked-On: #1479
Signed-off-by: Liang Yang <liang3.yang@intel.com>
Reviewed-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Liu Shuo <shuo.a.liu@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
Enable pstore via the sos kernel cmdline, as ABL doesn't
reserve memory and pass parameters for pstore.
Tracked-On: #1024
Signed-off-by: Zhi Jin <zhi.jin@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
New feature:
Update vFastboot to v1.0
Boot time optimization
Support Crash mode, which uses vFastboot in vSBL as Crash mode target.
Support Ramooops.
Tracked-On: #968, #1578, #1579, #1580
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
if acrnd or acrn_guest service enabled, launch_uos.sh will be called
early time during system boot up, while a pci driver module may be
insmod and disable cpu hotplug in short time, which could make
cpu offline fail, we need check it to make sure cpu offline real happen
before hypercall to disable vcpu.
Tracked-On: https://github.com/projectacrn/acrn-hypervisor/issues/1584
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
compare the two unsigned numbers to avoid delta calculation overflow.
It could happen during UOS warm root, which can trigger a "fake"
interrupt storm.
Tracked-On: #1476
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
sscanf and strcpy are banned according to the security requirements.
So replace them with their safe alternative.
Tracked-on: #1496
Signed-off-by: Jie Deng <jie.deng@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
These APIs are wrap of standard strto* APIs. The first parameters in
these APIs should be declared as "const" since they have never been
changed so that they can also be used when passing a variable declared
as const char *
Fixes: e1dab512c2 ("dm: add string convert API")
Tracked-on: #1496
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Yu Wang <yu1.wang@intel.com>
