move some funcitons like hpa2hva to common file.
change some files to include file from asm/pgtable.h to common/pgtable.h
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
get_vm_from_vmid,is_paused_vm and is_poweroff_vm should be common APIs.
But now doesn't implement them as common for not introduce more VM related
data structure and APIs.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extract common interface to include/lib/bits.h, and invoke the variant
implementation of arch.
Re-implement unlocked functions as C in common library.
Rename bitmap*lock() to bitmap*(), bitmap*nolock() to bitmap*non_atomic().
Tracked-On: #8803
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Move x86 architecture dependent per cpu data into a
seperate structure and embeded it in per_cpu_region.
caller could access architecture dependent member by
using prefix 'arch.'.
v2->v3:
move whose_iwkey, profiling_info and tsc_suspend to x86
v1->v2:
rebased on latest repo
Tracked-On: #8801
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Reviewed-by: Chen, Jian Jun<jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The hypervisor image size is determined at link time, but now it is
calculated and stored in a global variable during mmu initialization,
and the helper function reads from that variable. Change to calculate
it inside helper function to avoid inconsistency.
Tracked-On: #8738
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
In current code process, hyperv data in struct vm_arch is never cleared
during VM shutdown and is retained to next VM launch. As the enabled
bit of hypercall_page msr is not clear, hypercall page might cause fatal
error such as Windows VM BSOD during VM restart and memory
remapping. Hyperv page destory function can ensure hyperv page is
destory during each VM shutdown so hyperv related config such as
hypercall page is established correctly during each VM launch.
Tracked-On: #8755
Signed-off-by: Yichong Tang <yichong.tang@intel.com>
GUEST_FLAG_STATELESS indicates guest is running a stateless operating
system and need to be shutdown forcefully without data loss. This flag
is only appalicable to pre-launched VM. For TEE_VM, this flag will be
set implicitly.
Tracked-On: #8671
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Now multiboot modules memory is already reserved from e820 in function
`alloc_mods_memory()` and Service VM will not corrupt pre-launched VM
modules.
So remove the code of Service VM delayed loading.
Tracked-On: #8652
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
1. Enable Service VM to power off or restart the whole platform even when RTVM is running.
2. Allow Service VM stop the RTVM using acrnctl tool with option "stop -f".
3. Add 'Service VM supervisor role enabled' option in ACRN configurator
Tracked-On: #8618
Signed-off-by: YuanXin-Intel <xin.yuan@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Jian Jun Chen <jian.jun.chen@intel.com>
Now only BSP is reset. After Service VM OS resumes from s3, APs'
apic_base_msr are incorrect with x2apic bit en.
To avoid incorrect states, do `reset_vm` after resume.
Tracked-On: #8623
Signed-off-by: Haiwei Li <haiwei.li@intel.com>
This patch creates vm_event support in HV, including:
1. Create vm_event data type.
2. Add vm_event sbuf and its initializer. The sbuf will be allocated by
DM in Service VM. Its page address will then be share to HV through
hypercall.
3. Add an API to send the HV generated event.
Tracked-On: #8547
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
On some platforms, the last e820 entry may not be of type E820_TYPE_RAM,
such as E820_TYPE_ACPI_NVS which may also be used by Service VM.
So we need take all e820 entry types into account when finding the upper
bound of Service VM EPT mapping.
Tracked-On: #8495
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Thermal events are delivered through lapic thermal LVT. Currently
ACRN does not support delivering those interrupts to guests by
virtual lapic. They need to be virtualized to provide guests some
thermal management abilities. Currently we just hide thermal
lvt from guests, including:
1. Thermal LVT:
There is no way to hide thermal LVT from guests. But we need do
something to make sure no interrupt can be actually trigered:
- skip thermal LVT in vlapic_trigger_lvt()
- trap-and-emulate thermal LVT in lapic-pt mode
2. As We have plan to introduce virtualization of thermal monitor in the
future, we use a vm flag GUEST_FLAG_VTM which is default 0 to control
the access to it. So that it can help enabling VTM in the future.
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Currently CPU frequency control is hidden to guests, and controlled
by hypervisor. While it is sufficient in most cases, some guest OS may
still need CPU performance info to make multi-core scheduling decisions.
This is seen on Linux kernel, which uses HWP highest performance level
as CPU core's priority in multi-core scheduling (CONFIG_SCHED_MC_PRIO).
Enabling this kernel feature could improve performance as single thread
workloads are scheduled on the highest performance cores. This is
significantly useful for guests with hybrid cores.
The concept is to expose performance interface to guest who exclusively
owns pCPU assigned to it. So that Linux guest can load intel_pstate
driver which will then provide the kernel with each core's schedule
priority.
Intel_pstate driver also relies on CONFIG_ACPI_CPPC_LIB to implement
this mechanic, this means we also need to provide ACPI _CPC in DM.
This patch sets up a guest flag GUEST_FLAG_VHWP to indicate whether
the guest can have VHWP feature.
Tracked-On: #8414
Signed-off-by: Wu Zhou <wu.zhou@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
When CPU support MONITOR/MWAIT, OS prefer to use it enter
deeper C-state.
Now ACRN pass through MONITOR/MWAIT to guest.
For vCPUs (ie vCPU A and vCPU B) share a pCPU, if vCPU A uses MWait to enter C state,
vCPU B could run only after the time slice of vCPU A is expired. This time slice of
vCPU A is gone to waste.
For Local APIC pass-through (used for RTVM), the guest pay more attention to
timeliness than power saving.
So this patch hides MONITOR/MWAIT by:
1. Clear vCPUID.05H, vCPUID.01H:ECX.[bit 3] and
MSR_IA32_MISC_ENABLE_MONITOR_ENA to tell the guest VM's vCPU
does not support MONITOR/MAIT.
2. Enable MSR_IA32_MISC_ENABLE_MONITOR_ENA bit for
MSR_IA32_MISC_ENABLE inject 'GP'.
3. Trap instruction 'MONITOR' and 'MWAIT' and inject 'UD'.
4. Clear vCPUID.07H:ECX.[bit 5] to hide 'UMONITOR/UMWAIT'.
5. Clear "enable user wait and pause" VM-execution control, so
UMONITOR/MWAIT causes an 'UD'.
Tracked-On: #8253
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
The current code uses a predefined sworld memory array to reserve memory
for trusty VMs, and assume all post launched VMs are trusty VM which is
not correct.
This patch statically reserved memory just for trusty VMs and save 16M
memory for every non trusty VM.
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Current IO emulation is synchronous. The user VM need to wait for the
completion of the the I/O request before return. But Virtio Spec
introduces introduces asynchronous IO with a new register in MMIO/PIO
space named NOTIFY, to be used for FE driver to notify BE driver, ACRN
hypervisor can emulate this register by sending a notification to vCPU
in Service VM side. This way, FE side can resume to work without waiting
for the full completion of BE side response.
Tracked-On: #8209
Signed-off-by: Conghui <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
INIT signal has been used to kick off the partitioned pCPU, like RTVM,
whose LAPIC is pass-through. notification IPI is used to kick off
sharing pCPU.
Add mode_to_kick_pcpu in per-cpu to control the way of kicking
pCPU.
Tracked-On: #8207
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Modified the copyright year range in code, and corrected "int32_tel"
into "Intel" in two "hypervisor/include/debug/profiling.h" and
"hypervisor/include/debug/profiling_internal.h".
Tracked-On: #7559
Signed-off-by: Ziheng Li <ziheng.li@intel.com>
when SSRAM regions are assigned to service VM
to support virtulization of SSRAM for post-launched
RTVMs, service VM need to access all SSRAM regions
for management, typically, service VM does data
cleanup in SSRAM region when it is reclaimed from
a shutdown RTVM.
This patch update memory type from UC(by default)
to WB, else SSARM region will be evicted when access
from guest happens.
Tracked-On: #7425
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
When booting prelaunch RTVM with SSRAM enabled, we need to delete the
SSRAM region that is used by prelaunch RTVM from Service VM EPT mapping.
If it is not used, or it is not fully used, the SSRAM or the rest SSRAM
should be in Service VM map.
But current code has a issue that it always deletes all SSRAM region
from Service VM EPT, even when no SSRAM is enabled for prelaunch RTVM.
This could cause the post RTVM with SSRAM boot failure, as DM checks and
removes SSRAM region from Service VM EPT during post RTVM setup.
Changing get_software_sram_size() to PRE_RTVM_SW_SRAM_MAX_SIZE could
solve the issue, as PRE_RTVM_SW_SRAM_MAX_SIZE is the SSRAM size that
prelaunch RTVM actually uses.
Tracked-On: #7401
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
The current code only supports 2 HPA regions per VM.
This patch extended ACRN to support 2+ HPA regions per VM, to use host
memory better if it is scatted among multiple regions.
This patch uses an array to describe the hpa region for the VM, and
change the logic of ve820 to support multiple regions.
This patch dependent on the config tool and GPA SSRAM change
Tracked-On: #6690
Signed-off-by: Chenli Wei <chenli.wei@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Using the SSRAM area size extracted by config_tools, the patch changes
the hard-coded GPA SSRAM area size to its actual size, so that
pre-launched VMs can support large(>8MB) SSRAM area.
When booting service VM, the SSRAM area has to be removed from Service
VM's mem space, because they are passed-through to the pre-rt VM. The
code was bugged since it was using the SSRAM area's GPA in the pre-rt
VM. Changed it to GPA in Service VM.
Tracked-On: #7212
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).
Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Add a flag: GUEST_FLAG_PMU_PASSTHROUGH to indicate if
PMU (Performance Monitor Unit) is passthrough to guest VM.
Tracked-On: #6966
Acked-by: Anthony Xu <anthony.xu@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
The coding guideline rule C-ST-04 requires that
a 'if' statement followed by one or more 'else if'
statement shall be terminated by an 'else' statement
which contains either appropriate action or a comment.
Tracked-On: #6776
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch introduces stateful VM which represents a VM that has its own
internal state such as a file cache, and adds a check before system
shutdown to make sure that stateless VM does not block system shutdown.
Tracked-On: #6571
Signed-off-by: Wang Yu <yu1.wang@intel.com>
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch adds the x86_tee hypercall interfaces.
- HC_TEE_VCPU_BOOT_DONE
This hypercall is used to notify the hypervisor that the TEE VCPU Boot
is done, so that we can sleep the corresponding TEE VCPU. REE will be
started at the last time this hypercall is called by TEE.
- HC_SWITCH_EE
For REE VM, it uses this hypercall to request TEE service.
For TEE VM, it uses this hypercall to switch back to REE
when it completes the REE service.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
TEE is a secure VM which has its own partitioned resources while
REE is a normal VM which owns the rest of platform resources.
The TEE, as a secure world, it can see the memory of the REE
VM, also known as normal world, but not the other way around.
But please note, TEE and REE can only see their own devices.
So this patch does the following things:
1. go through physical e820 table, to ept add all system memory entries.
2. remove hv owned memory.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
Given an e820, this API creates an identical memmap for specified
e820 memory type, EPT memory cache type and access right.
Tracked-On: #6571
Signed-off-by: Jie Deng <jie.deng@intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
With current arch design the UUID is used to identify ACRN VMs,
all VM configurations must be deployed with given UUIDs at build time.
For post-launched VMs, end user must use UUID as acrn-dm parameter
to launch specified user VM. This is not friendly for end users
that they have to look up the pre-configured UUID before launching VM,
and then can only launch the VM which its UUID in the pre-configured UUID
list,otherwise the launch will fail.Another side, VM name is much straight
forward for end user to identify VMs, whereas the VM name defined
in launch script has not been passed to hypervisor VM configuration
so it is not consistent with the VM name when user list VM
in hypervisor shell, this would confuse user a lot.
This patch will resolve these issues by removing UUID as VM identifier
and use VM name instead:
1. Hypervisor will check the VM name duplication during VM creation time
to make sure the VM name is unique.
2. If the VM name passed from acrn-dm matches one of pre-configured
VM configurations, the corresponding VM will be launched,
we call it static configured VM.
If there is no matching found, hypervisor will try to allocate one
unused VM configuration slot for this VM with given VM name and get it
run if VM number does not reach CONFIG_MAX_VM_NUM,
we will call it dynamic configured VM.
3. For dynamic configured VMs, we need a guest flag to identify them
because the VM configuration need to be destroyed
when it is shutdown or creation failed.
v7->v8:
-- rename is_static_vm_configured to is_static_configured_vm
-- only set DM owned guest_flags in hcall_create_vm
-- add check dynamic flag in get_unused_vmid
v6->v7:
-- refine get_vmid_by_name, return the first matching vm_id
-- the GUEST_FLAG_STATIC_VM is added to identify the static or
dynamic VM, the offline tool will set this flag for
all the pre-defined VMs.
-- only clear name field for dynamic VM instead of clear entire
vm_config
Tracked-On: #6685
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Victor Sun<victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CONFIG_LOW_RAM_SIZE is used to describe the size of trampoline code
that is never changed. And it totally confused user to configure it.
This patch hard code it to 1MB and remove the macro for configuration.
In the trampoline related code, use ld_trampoline_end and
ld_trampoline_start symbol to calculate the real size.
Tracked-On: #6805
Signed-off-by: Yuanyuan Zhao <yuanyuan.zhao@linux.intel.com>
Reviewed-by: Wang, Yu1 <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The coding guideline rules C-TY-27 and C-TY-28, combined, requires that
assignment and arithmetic operations shall be applied only on operands of the
same kind. This patch either adds explicit type casts or adjust types of
variables to align the types of operands.
The only semantic change introduced by this patch is the promotion of the
second argument of set_vmcs_bit() and clear_vmcs_bit() to
uint64_t (formerly uint32_t). This avoids clear_vmcs_bit() to accidentally
clears the upper 32 bits of the requested VMCS field.
Other than that, this patch has no semantic change. Specifically this patch
is not meant to fix buggy narrowing operations, only to make these
operations explicit.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes the following warnings detected by the LLVM/Clang
compiler:
1. Unused static functions in C sources, which are fixed by explicitly
tagging them with __unused
2. Duplicated parentheses around branch conditions
3. Assigning 64-bit constants to 32-bit variables, which is fixed by
promoting the variables to uint64_t
4. Using { '\0' } to zero-fill an array, which is fixed by replacing it
with { 0 }
5. Taking a bit out of a variable using && (which should be & instead)
Most changes do not have a semantic impact, except item 5 which is probably
a real code issue.
Tracked-On: #6776
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename SOS_VM type to SERVICE_VM
rename UOS to User VM in XML description
rename uos_thread_pid to user_vm_thread_pid
rename devname_uos to devname_user_vm
rename uosid to user_vmid
rename UOS_ACK to USER_VM_ACK
rename SOS_VM_CONFIG_CPU_AFFINITY to SERVICE_VM_CONFIG_CPU_AFFINITY
rename SOS_COM to SERVICE_VM_COM
rename SOS_UART1_VALID_NUM" to SERVICE_VM_UART1_VALID_NUM
rename SOS_BOOTARGS_DIFF to SERVICE_VM_BOOTARGS_DIFF
rename uos to user_vm in launch script and xml
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Rename sos_vm to service_vm.
rename sos_vmid to service_vmid.
rename sos_vm_ptr to service_vm_ptr.
rename get_sos_vm to get_service_vm.
rename sos_vm_gpa to service_vm_gpa.
rename sos_vm_e820 to service_vm_e820.
rename sos_efi_info to service_vm_efi_info.
rename sos_vm_config to service_vm_config.
rename sos_vm_hpa2gpa to service_vm_hpa2gpa.
rename vdev_in_sos to vdev_in_service_vm.
rename create_sos_vm_e820 to create_service_vm_e820.
rename sos_high64_max_ram to service_vm_high64_max_ram.
rename prepare_sos_vm_memmap to prepare_service_vm_memmap.
rename post_uos_sworld_memory to post_user_vm_sworld_memory
rename hcall_sos_offline_cpu to hcall_service_vm_offline_cpu.
rename filter_mem_from_sos_e820 to filter_mem_from_service_vm_e820.
rename create_sos_vm_efi_mmap_desc to create_service_vm_efi_mmap_desc.
rename HC_SOS_OFFLINE_CPU to HC_SERVICE_VM_OFFLINE_CPU.
rename SOS to Service VM in comments message.
Tracked-On: #6744
Signed-off-by: Liu Long <long.liu@linux.intel.com>
Reviewed-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Initialize vCBM MSRs
Initialize vCLOSID MSR
Add some vCAT functions:
Retrieve max_vcbm and max_pcbm
Check if vCAT is configured or not for the VM
Map vclosid to pclosid
write_vclosid: vCLOSID MSR write handler
write_vcbm: vCBM MSR write handler
Tracked-On: #5917
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
IOMMU hardware resource is owned by hypervisor, while
IOMMU capability is reported to service VM in its ACPI
table. In this case, Service VM may access IOMMU hardware
resource, which is not expected.
This patch unmaps all Intel IOMMU register pages for service VM EPT.
Tracked-On: #6677
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
It's difficult to configure CONFIG_HV_RAM_SIZE properly at once. This patch
not only remove CONFIG_HV_RAM_SIZE, but also we use ld linker script to
dynamically get the size of HV RAM size.
Tracked-On: #6663
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current design, when pass-thru dev,
for the PIO bar, need to ensure the guest PIO start address
equals to host PIO start address.
Then set the VMCS io bitmap to pass-thru the corresponding
port io to guest for performance.
ACRN-DM and acrn-config should ensure the identical mapping of PIO bar.
If ACRN-DM or acrn-config failed to achieve this,
we should deny the launch of VM
Tracked-On: #6508
Signed-off-by: Liu,Junming <junming.liu@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
This feature is guarded under config CONFIG_SECURITY_VM_FIXUP, which
by default should be disabled.
This patch passthrough native SMBIOS information to prelaunched VM.
SMBIOS table contains a small entry point structure and a table, of which
the entry point structure will be put in 0xf0000-0xfffff region in guest
address space, and the table will be put in the ACPI_NVS region in guest
address space.
v2 -> v3:
uuid_is_equal moved to util.h as inline API
result -> pVendortable, in function efi_search_guid
recalc_checksum -> generate_checksum
efi_search_smbios -> efi_search_smbios_eps
scan_smbios_eps -> mem_search_smbios_eps
EFI GUID definition kept
Tracked-On: #6320
Signed-off-by: Yifan Liu <yifan1.liu@intel.com>
Remove the acpi loading function from elf_loader, rawimage_loaer and
bzimage_loader, and call it together in vm_sw_loader.
Now the vm_sw_loader's job is not just loading sw, so we rename it to
prepare_os_image.
Tracked-On: #6323
Signed-off-by: Zhou, Wu <wu.zhou@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
vboot_info.h declares vm loader function also, so rename the file name to
vboot.h;
Tracked-On: #6323
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN used to prepare the vTPM2 ACPI Table for pre-launched VM at the build stage
using config tools. This is OK if the TPM2 ACPI Table never changes. However,
TPM2 ACPI Table may be changed in some conditions: change BIOS configuration or
update BIOS.
This patch do TPM2 fixup to update the vTPM2 ACPI Table and TPM2 MMIO resource
configuration according to the physical TPM2 ACPI Table.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
1. add a name field to indicate what the MMIO Device is.
2. add two more MMIO resource to the acrn_mmiodev data structure.
Tracked-On: #6366
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
When hypervisor boots, the multiboot modules have been loaded to host space
by bootloader already. The space range of pre-launched VM modules is also
exposed to SOS VM, so SOS VM kernel might pick this range to extract kernel
when KASLR enabled. This would corrupt pre-launched VM modules and result in
pre-launched VM boot fail.
This patch will try to fix this issue. The SOS VM will not be loaded to guest
space until all pre-launched VMs are loaded successfully.
Tracked-On: #5879
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
